ide: add ide_pio_cycle_time() helper (take 2)
* Add ide_pio_cycle_time() helper.
* Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers
(previously cycle time given by the device was only used for "pio" == 255).
* Remove no longer needed ide_pio_data_t.cycle_time field.
v2:
* Fix "ata_" prefix (Noticed by Jeff).
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index dff2159..9f67ffc 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -633,9 +633,8 @@
*/
static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
{
+ unsigned int index = 0, cycle_time;
u8 b;
- ide_pio_data_t d;
- unsigned int index = 0;
while (drive != cmd_drives[index]) {
if (++index > 3) {
@@ -662,13 +661,12 @@
return;
}
- (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
- cmd640_set_mode (index, d.pio_mode, d.cycle_time);
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+ cycle_time = ide_pio_cycle_time(drive, mode_wanted);
+ cmd640_set_mode(index, mode_wanted, cycle_time);
printk("%s: selected cmd640 PIO mode%d (%dns)",
- drive->name,
- d.pio_mode,
- d.cycle_time);
+ drive->name, mode_wanted, cycle_time);
display_clocks(index);
}
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 8150a02..c383f6d 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -221,16 +221,18 @@
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- ide_pio_data_t pio;
+ unsigned int cycle_time;
u8 pio_mode, setup_count, arttim = 0;
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
- pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, &pio);
+
+ pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+ cycle_time = ide_pio_cycle_time(drive, pio_mode);
cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
- drive->name, mode_wanted, pio_mode, pio.cycle_time);
+ drive->name, mode_wanted, pio_mode, cycle_time);
- program_cycle_times(drive, pio.cycle_time,
+ program_cycle_times(drive, cycle_time,
ide_pio_timings[pio_mode].active_time);
setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time,
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index f4637d2..cc5f69b 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -52,13 +52,13 @@
* Convert a PIO mode and cycle time to the required on/off times
* for the interface. This has protection against runaway timings.
*/
-static unsigned int get_pio_timings(ide_drive_t *drive, ide_pio_data_t *p)
+static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
{
unsigned int cmd_on, cmd_off;
u8 iordy = 0;
- cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30;
- cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30;
+ cmd_on = (ide_pio_timings[pio].active_time + 29) / 30;
+ cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30;
if (cmd_on == 0)
cmd_on = 1;
@@ -66,7 +66,7 @@
if (cmd_off == 0)
cmd_off = 1;
- if (p->pio_mode > 2 || ide_dev_has_iordy(drive->id))
+ if (pio > 2 || ide_dev_has_iordy(drive->id))
iordy = 0x40;
return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
@@ -79,14 +79,13 @@
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
int reg = 0x44 + drive->dn * 4;
- ide_pio_data_t p;
u16 drv_ctrl;
DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
- pio = ide_get_best_pio_mode(drive, pio, 5, &p);
+ pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
- drv_ctrl = get_pio_timings(drive, &p);
+ drv_ctrl = get_pio_timings(drive, pio);
/*
* Store the PIO timings so that we can restore them
@@ -105,7 +104,8 @@
}
printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
- ide_xfer_verbose(pio + XFER_PIO_0), p.cycle_time, drv_ctrl);
+ ide_xfer_verbose(pio + XFER_PIO_0),
+ ide_pio_cycle_time(drive, pio), drv_ctrl);
return pio;
}