ide: add ide_pio_cycle_time() helper (take 2)
* Add ide_pio_cycle_time() helper.
* Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers
(previously cycle time given by the device was only used for "pio" == 255).
* Remove no longer needed ide_pio_data_t.cycle_time field.
v2:
* Fix "ata_" prefix (Noticed by Jeff).
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index e46f4720..6693305 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -615,24 +615,25 @@
static void
pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
u32 *timings;
unsigned accessTicks, recTicks;
unsigned accessTime, recTime;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
-
+ unsigned int cycle_time;
+
if (pmif == NULL)
return;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
- pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ cycle_time = ide_pio_cycle_time(drive, pio);
switch (pmif->kind) {
case controller_sh_ata6: {
/* 133Mhz cell */
- u32 tr = kauai_lookup_timing(shasta_pio_timings, d.cycle_time);
+ u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
if (tr == 0)
return;
*timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
@@ -641,7 +642,7 @@
case controller_un_ata6:
case controller_k2_ata6: {
/* 100Mhz cell */
- u32 tr = kauai_lookup_timing(kauai_pio_timings, d.cycle_time);
+ u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
if (tr == 0)
return;
*timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
@@ -649,7 +650,7 @@
}
case controller_kl_ata4:
/* 66Mhz cell */
- recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ recTime = cycle_time - ide_pio_timings[pio].active_time
- ide_pio_timings[pio].setup_time;
recTime = max(recTime, 150U);
accessTime = ide_pio_timings[pio].active_time;
@@ -665,7 +666,7 @@
default: {
/* 33Mhz cell */
int ebit = 0;
- recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ recTime = cycle_time - ide_pio_timings[pio].active_time
- ide_pio_timings[pio].setup_time;
recTime = max(recTime, 150U);
accessTime = ide_pio_timings[pio].active_time;