diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index e80ee23..2d899fd 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -41,12 +41,17 @@
 #define REG_TDP_RUNNING_AVERAGE		0xe0
 #define REG_TDP_LIMIT3			0xe8
 
+#define FAM15H_MIN_NUM_ATTRS		2
+#define FAM15H_NUM_GROUPS		2
+
 struct fam15h_power_data {
 	struct pci_dev *pdev;
 	unsigned int tdp_to_watts;
 	unsigned int base_tdp;
 	unsigned int processor_pwr_watts;
 	unsigned int cpu_pwr_sample_ratio;
+	const struct attribute_group *groups[FAM15H_NUM_GROUPS];
+	struct attribute_group group;
 };
 
 static ssize_t show_power(struct device *dev,
@@ -105,30 +110,32 @@
 }
 static DEVICE_ATTR(power1_crit, S_IRUGO, show_power_crit, NULL);
 
-static umode_t fam15h_power_is_visible(struct kobject *kobj,
-				       struct attribute *attr,
-				       int index)
+static int fam15h_power_init_attrs(struct pci_dev *pdev,
+				   struct fam15h_power_data *data)
 {
-	/* power1_input is only reported for Fam15h, Models 00h-0fh */
-	if (attr == &dev_attr_power1_input.attr &&
-	   (boot_cpu_data.x86 != 0x15 || boot_cpu_data.x86_model > 0xf))
-		return 0;
+	int n = FAM15H_MIN_NUM_ATTRS;
+	struct attribute **fam15h_power_attrs;
 
-	return attr->mode;
+	if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model <= 0xf)
+		n += 1;
+
+	fam15h_power_attrs = devm_kcalloc(&pdev->dev, n,
+					  sizeof(*fam15h_power_attrs),
+					  GFP_KERNEL);
+
+	if (!fam15h_power_attrs)
+		return -ENOMEM;
+
+	n = 0;
+	fam15h_power_attrs[n++] = &dev_attr_power1_crit.attr;
+	if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model <= 0xf)
+		fam15h_power_attrs[n++] = &dev_attr_power1_input.attr;
+
+	data->group.attrs = fam15h_power_attrs;
+
+	return 0;
 }
 
-static struct attribute *fam15h_power_attrs[] = {
-	&dev_attr_power1_input.attr,
-	&dev_attr_power1_crit.attr,
-	NULL
-};
-
-static const struct attribute_group fam15h_power_group = {
-	.attrs = fam15h_power_attrs,
-	.is_visible = fam15h_power_is_visible,
-};
-__ATTRIBUTE_GROUPS(fam15h_power);
-
 static bool should_load_on_this_node(struct pci_dev *f4)
 {
 	u32 val;
@@ -186,11 +193,12 @@
 #define fam15h_power_resume NULL
 #endif
 
-static void fam15h_power_init_data(struct pci_dev *f4,
-					     struct fam15h_power_data *data)
+static int fam15h_power_init_data(struct pci_dev *f4,
+				  struct fam15h_power_data *data)
 {
 	u32 val, eax, ebx, ecx, edx;
 	u64 tmp;
+	int ret;
 
 	pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val);
 	data->base_tdp = val >> 16;
@@ -211,11 +219,15 @@
 	/* convert to microWatt */
 	data->processor_pwr_watts = (tmp * 15625) >> 10;
 
+	ret = fam15h_power_init_attrs(f4, data);
+	if (ret)
+		return ret;
+
 	cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
 
 	/* CPUID Fn8000_0007:EDX[12] indicates to support accumulated power */
 	if (!(edx & BIT(12)))
-		return;
+		return 0;
 
 	/*
 	 * determine the ratio of the compute unit power accumulator
@@ -223,14 +235,17 @@
 	 * Fn8000_0007:ECX
 	 */
 	data->cpu_pwr_sample_ratio = ecx;
+
+	return 0;
 }
 
 static int fam15h_power_probe(struct pci_dev *pdev,
-					const struct pci_device_id *id)
+			      const struct pci_device_id *id)
 {
 	struct fam15h_power_data *data;
 	struct device *dev = &pdev->dev;
 	struct device *hwmon_dev;
+	int ret;
 
 	/*
 	 * though we ignore every other northbridge, we still have to
@@ -246,12 +261,17 @@
 	if (!data)
 		return -ENOMEM;
 
-	fam15h_power_init_data(pdev, data);
+	ret = fam15h_power_init_data(pdev, data);
+	if (ret)
+		return ret;
+
 	data->pdev = pdev;
 
+	data->groups[0] = &data->group;
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, "fam15h_power",
 							   data,
-							   fam15h_power_groups);
+							   &data->groups[0]);
 	return PTR_ERR_OR_ZERO(hwmon_dev);
 }