drivers/serial/netx-serial.c - kernel/msm-4.9 - Gitiles

 /*
  * drivers/serial/netx-serial.c
  *
  * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2
  * as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */

 #if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif

 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>

 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware.h>
 #include <asm/arch/netx-regs.h>

 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_NX_MAJOR	204
 #define MINOR_START	170

 #ifdef CONFIG_SERIAL_NETX_CONSOLE

 enum uart_regs {
 	UART_DR              = 0x00,
 	UART_SR              = 0x04,
 	UART_LINE_CR         = 0x08,
 	UART_BAUDDIV_MSB     = 0x0c,
 	UART_BAUDDIV_LSB     = 0x10,
 	UART_CR              = 0x14,
 	UART_FR              = 0x18,
 	UART_IIR             = 0x1c,
 	UART_ILPR            = 0x20,
 	UART_RTS_CR          = 0x24,
 	UART_RTS_LEAD        = 0x28,
 	UART_RTS_TRAIL       = 0x2c,
 	UART_DRV_ENABLE      = 0x30,
 	UART_BRM_CR          = 0x34,
 	UART_RXFIFO_IRQLEVEL = 0x38,
 	UART_TXFIFO_IRQLEVEL = 0x3c,
 };

 #define SR_FE (1<<0)
 #define SR_PE (1<<1)
 #define SR_BE (1<<2)
 #define SR_OE (1<<3)

 #define LINE_CR_BRK       (1<<0)
 #define LINE_CR_PEN       (1<<1)
 #define LINE_CR_EPS       (1<<2)
 #define LINE_CR_STP2      (1<<3)
 #define LINE_CR_FEN       (1<<4)
 #define LINE_CR_5BIT      (0<<5)
 #define LINE_CR_6BIT      (1<<5)
 #define LINE_CR_7BIT      (2<<5)
 #define LINE_CR_8BIT      (3<<5)
 #define LINE_CR_BITS_MASK (3<<5)

 #define CR_UART_EN (1<<0)
 #define CR_SIREN   (1<<1)
 #define CR_SIRLP   (1<<2)
 #define CR_MSIE    (1<<3)
 #define CR_RIE     (1<<4)
 #define CR_TIE     (1<<5)
 #define CR_RTIE    (1<<6)
 #define CR_LBE     (1<<7)

 #define FR_CTS  (1<<0)
 #define FR_DSR  (1<<1)
 #define FR_DCD  (1<<2)
 #define FR_BUSY (1<<3)
 #define FR_RXFE (1<<4)
 #define FR_TXFF (1<<5)
 #define FR_RXFF (1<<6)
 #define FR_TXFE (1<<7)

 #define IIR_MIS (1<<0)
 #define IIR_RIS (1<<1)
 #define IIR_TIS (1<<2)
 #define IIR_RTIS (1<<3)
 #define IIR_MASK 0xf

 #define RTS_CR_AUTO (1<<0)
 #define RTS_CR_RTS  (1<<1)
 #define RTS_CR_COUNT (1<<2)
 #define RTS_CR_MOD2  (1<<3)
 #define RTS_CR_RTS_POL (1<<4)
 #define RTS_CR_CTS_CTR (1<<5)
 #define RTS_CR_CTS_POL (1<<6)
 #define RTS_CR_STICK   (1<<7)

 #define UART_PORT_SIZE 0x40
 #define DRIVER_NAME "netx-uart"

 struct netx_port {
 	struct uart_port	port;
 };

 static void netx_stop_tx(struct uart_port *port)
 {
 	unsigned int val;
 	val = readl(port->membase + UART_CR);
 	writel(val & ~CR_TIE,  port->membase + UART_CR);
 }

 static void netx_stop_rx(struct uart_port *port)
 {
 	unsigned int val;
 	val = readl(port->membase + UART_CR);
 	writel(val & ~CR_RIE,  port->membase + UART_CR);
 }

 static void netx_enable_ms(struct uart_port *port)
 {
 	unsigned int val;
 	val = readl(port->membase + UART_CR);
 	writel(val | CR_MSIE, port->membase + UART_CR);
 }

 static inline void netx_transmit_buffer(struct uart_port *port)
 {
 	struct circ_buf *xmit = &port->info->xmit;

 	if (port->x_char) {
 		writel(port->x_char, port->membase + UART_DR);
 		port->icount.tx++;
 		port->x_char = 0;
 		return;
 	}

 	if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
 		netx_stop_tx(port);
 		return;
 	}

 	do {
 		/* send xmit->buf[xmit->tail]
 		 * out the port here */
 		writel(xmit->buf[xmit->tail], port->membase + UART_DR);
 		xmit->tail = (xmit->tail + 1) &
 		         (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
 		if (uart_circ_empty(xmit))
 			break;
 	} while (!(readl(port->membase + UART_FR) & FR_TXFF));

 	if (uart_circ_empty(xmit))
 		netx_stop_tx(port);
 }

 static void netx_start_tx(struct uart_port *port)
 {
 	writel(
 	    readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR);

 	if (!(readl(port->membase + UART_FR) & FR_TXFF))
 		netx_transmit_buffer(port);
 }

 static unsigned int netx_tx_empty(struct uart_port *port)
 {
 	return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT;
 }

 static void netx_txint(struct uart_port *port)
 {
 	struct circ_buf *xmit = &port->info->xmit;

 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		netx_stop_tx(port);
 		return;
 	}

 	netx_transmit_buffer(port);

 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 }

 static void netx_rxint(struct uart_port *port)
 {
 	unsigned char rx, flg, status;
 	struct tty_struct *tty = port->info->tty;

 	while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
 		rx = readl(port->membase + UART_DR);
 		flg = TTY_NORMAL;
 		port->icount.rx++;
 		status = readl(port->membase + UART_SR);
 		if (status & SR_BE) {
 			writel(0, port->membase + UART_SR);
 			if (uart_handle_break(port))
 				continue;
 		}

 		if (unlikely(status & (SR_FE | SR_PE | SR_OE))) {

 			if (status & SR_PE)
 				port->icount.parity++;
 			else if (status & SR_FE)
 				port->icount.frame++;
 			if (status & SR_OE)
 				port->icount.overrun++;

 			status &= port->read_status_mask;

 			if (status & SR_BE)
 				flg = TTY_BREAK;
 			else if (status & SR_PE)
 				flg = TTY_PARITY;
 			else if (status & SR_FE)
 				flg = TTY_FRAME;
 		}

 		if (uart_handle_sysrq_char(port, rx))
 			continue;

 		uart_insert_char(port, status, SR_OE, rx, flg);
 	}

 	tty_flip_buffer_push(tty);
 	return;
 }

 static irqreturn_t netx_int(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
 	unsigned long flags;
 	unsigned char status;

 	spin_lock_irqsave(&port->lock,flags);

 	status = readl(port->membase + UART_IIR) & IIR_MASK;
 	while (status) {
 		if (status & IIR_RIS)
 			netx_rxint(port);
 		if (status & IIR_TIS)
 			netx_txint(port);
 		if (status & IIR_MIS) {
 			if (readl(port->membase + UART_FR) & FR_CTS)
 				uart_handle_cts_change(port, 1);
 			else
 				uart_handle_cts_change(port, 0);
 		}
 		writel(0, port->membase + UART_IIR);
 		status = readl(port->membase + UART_IIR) & IIR_MASK;
 	}

 	spin_unlock_irqrestore(&port->lock,flags);
 	return IRQ_HANDLED;
 }

 static unsigned int netx_get_mctrl(struct uart_port *port)
 {
 	unsigned int ret = TIOCM_DSR | TIOCM_CAR;

 	if (readl(port->membase + UART_FR) & FR_CTS)
 		ret |= TIOCM_CTS;

 	return ret;
 }

 static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	unsigned int val;

 	/* FIXME: Locking needed ? */
 	if (mctrl & TIOCM_RTS) {
 		val = readl(port->membase + UART_RTS_CR);
 		writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR);
 	}
 }

 static void netx_break_ctl(struct uart_port *port, int break_state)
 {
 	unsigned int line_cr;
 	spin_lock_irq(&port->lock);

 	line_cr = readl(port->membase + UART_LINE_CR);
 	if (break_state != 0)
 		line_cr |= LINE_CR_BRK;
 	else
 		line_cr &= ~LINE_CR_BRK;
 	writel(line_cr, port->membase + UART_LINE_CR);

 	spin_unlock_irq(&port->lock);
 }

 static int netx_startup(struct uart_port *port)
 {
 	int ret;

 	ret = request_irq(port->irq, netx_int, 0,
 			     DRIVER_NAME, port);
 	if (ret) {
 		dev_err(port->dev, "unable to grab irq%d\n",port->irq);
 		goto exit;
 	}

 	writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN,
 		port->membase + UART_LINE_CR);

 	writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN,
 		port->membase + UART_CR);

 exit:
 	return ret;
 }

 static void netx_shutdown(struct uart_port *port)
 {
 	writel(0, port->membase + UART_CR) ;

 	free_irq(port->irq, port);
 }

 static void
 netx_set_termios(struct uart_port *port, struct ktermios *termios,
 		   struct ktermios *old)
 {
 	unsigned int baud, quot;
 	unsigned char old_cr;
 	unsigned char line_cr = LINE_CR_FEN;
 	unsigned char rts_cr = 0;

 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
 		line_cr |= LINE_CR_5BIT;
 		break;
 	case CS6:
 		line_cr |= LINE_CR_6BIT;
 		break;
 	case CS7:
 		line_cr |= LINE_CR_7BIT;
 		break;
 	case CS8:
 		line_cr |= LINE_CR_8BIT;
 		break;
 	}

 	if (termios->c_cflag & CSTOPB)
 		line_cr |= LINE_CR_STP2;

 	if (termios->c_cflag & PARENB) {
 		line_cr |= LINE_CR_PEN;
 		if (!(termios->c_cflag & PARODD))
 			line_cr |= LINE_CR_EPS;
 	}

 	if (termios->c_cflag & CRTSCTS)
 		rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL;

 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
 	quot = baud * 4096;
 	quot /= 1000;
 	quot *= 256;
 	quot /= 100000;

 	spin_lock_irq(&port->lock);

 	uart_update_timeout(port, termios->c_cflag, baud);

 	old_cr = readl(port->membase + UART_CR);

 	/* disable interrupts */
 	writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE),
 		port->membase + UART_CR);

 	/* drain transmitter */
 	while (readl(port->membase + UART_FR) & FR_BUSY);

 	/* disable UART */
 	writel(old_cr & ~CR_UART_EN, port->membase + UART_CR);

 	/* modem status interrupts */
 	old_cr &= ~CR_MSIE;
 	if (UART_ENABLE_MS(port, termios->c_cflag))
 		old_cr |= CR_MSIE;

 	writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB);
 	writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB);
 	writel(line_cr, port->membase + UART_LINE_CR);

 	writel(rts_cr, port->membase + UART_RTS_CR);

 	/*
 	 * Characters to ignore
 	 */
 	port->ignore_status_mask = 0;
 	if (termios->c_iflag & IGNPAR)
 		port->ignore_status_mask |= SR_PE;
 	if (termios->c_iflag & IGNBRK) {
 		port->ignore_status_mask |= SR_BE;
 		/*
 		 * If we're ignoring parity and break indicators,
 		 * ignore overruns too (for real raw support).
 		 */
 		if (termios->c_iflag & IGNPAR)
 			port->ignore_status_mask |= SR_PE;
 	}

 	port->read_status_mask = 0;
 	if (termios->c_iflag & (BRKINT | PARMRK))
 		port->read_status_mask |= SR_BE;
 	if (termios->c_iflag & INPCK)
 		port->read_status_mask |= SR_PE | SR_FE;

 	writel(old_cr, port->membase + UART_CR);

 	spin_unlock_irq(&port->lock);
 }

 static const char *netx_type(struct uart_port *port)
 {
 	return port->type == PORT_NETX ? "NETX" : NULL;
 }

 static void netx_release_port(struct uart_port *port)
 {
 	release_mem_region(port->mapbase, UART_PORT_SIZE);
 }

 static int netx_request_port(struct uart_port *port)
 {
 	return request_mem_region(port->mapbase, UART_PORT_SIZE,
 			DRIVER_NAME) != NULL ? 0 : -EBUSY;
 }

 static void netx_config_port(struct uart_port *port, int flags)
 {
 	if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0)
 		port->type = PORT_NETX;
 }

 static int
 netx_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
 	int ret = 0;

 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX)
 		ret = -EINVAL;

 	return ret;
 }

 static struct uart_ops netx_pops = {
 	.tx_empty	= netx_tx_empty,
 	.set_mctrl	= netx_set_mctrl,
 	.get_mctrl	= netx_get_mctrl,
 	.stop_tx	= netx_stop_tx,
 	.start_tx	= netx_start_tx,
 	.stop_rx	= netx_stop_rx,
 	.enable_ms	= netx_enable_ms,
 	.break_ctl	= netx_break_ctl,
 	.startup	= netx_startup,
 	.shutdown	= netx_shutdown,
 	.set_termios	= netx_set_termios,
 	.type		= netx_type,
 	.release_port	= netx_release_port,
 	.request_port	= netx_request_port,
 	.config_port	= netx_config_port,
 	.verify_port	= netx_verify_port,
 };

 static struct netx_port netx_ports[] = {
 	{
 	.port = {
 		.type = PORT_NETX,
 		.iotype = UPIO_MEM,
 		.membase = (char __iomem *)io_p2v(NETX_PA_UART0),
 		.mapbase = NETX_PA_UART0,
 		.irq = NETX_IRQ_UART0,
 		.uartclk = 100000000,
 		.fifosize = 16,
 		.flags = UPF_BOOT_AUTOCONF,
 		.ops = &netx_pops,
 		.line = 0,
 	},
 	}, {
 	.port = {
 		.type = PORT_NETX,
 		.iotype = UPIO_MEM,
 		.membase = (char __iomem *)io_p2v(NETX_PA_UART1),
 		.mapbase = NETX_PA_UART1,
 		.irq = NETX_IRQ_UART1,
 		.uartclk = 100000000,
 		.fifosize = 16,
 		.flags = UPF_BOOT_AUTOCONF,
 		.ops = &netx_pops,
 		.line = 1,
 	},
 	}, {
 	.port = {
 		.type = PORT_NETX,
 		.iotype = UPIO_MEM,
 		.membase = (char __iomem *)io_p2v(NETX_PA_UART2),
 		.mapbase = NETX_PA_UART2,
 		.irq = NETX_IRQ_UART2,
 		.uartclk = 100000000,
 		.fifosize = 16,
 		.flags = UPF_BOOT_AUTOCONF,
 		.ops = &netx_pops,
 		.line = 2,
 	},
 	}
 };

 static void netx_console_putchar(struct uart_port *port, int ch)
 {
 	while (readl(port->membase + UART_FR) & FR_BUSY);
 	writel(ch, port->membase + UART_DR);
 }

 static void
 netx_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct uart_port *port = &netx_ports[co->index].port;
 	unsigned char cr_save;

 	cr_save = readl(port->membase + UART_CR);
 	writel(cr_save | CR_UART_EN, port->membase + UART_CR);

 	uart_console_write(port, s, count, netx_console_putchar);

 	while (readl(port->membase + UART_FR) & FR_BUSY);
 	writel(cr_save, port->membase + UART_CR);
 }

 static void __init
 netx_console_get_options(struct uart_port *port, int *baud,
 			int *parity, int *bits, int *flow)
 {
 	unsigned char line_cr;

 	*baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) |
 		readl(port->membase + UART_BAUDDIV_LSB);
 	*baud *= 1000;
 	*baud /= 4096;
 	*baud *= 1000;
 	*baud /= 256;
 	*baud *= 100;

 	line_cr = readl(port->membase + UART_LINE_CR);
 	*parity = 'n';
 	if (line_cr & LINE_CR_PEN) {
 		if (line_cr & LINE_CR_EPS)
 			*parity = 'e';
 		else
 			*parity = 'o';
 	}

 	switch (line_cr & LINE_CR_BITS_MASK) {
 	case LINE_CR_8BIT:
 		*bits = 8;
 		break;
 	case LINE_CR_7BIT:
 		*bits = 7;
 		break;
 	case LINE_CR_6BIT:
 		*bits = 6;
 		break;
 	case LINE_CR_5BIT:
 		*bits = 5;
 		break;
 	}

 	if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO)
 		*flow = 'r';
 }

 static int __init
 netx_console_setup(struct console *co, char *options)
 {
 	struct netx_port *sport;
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';

 	/*
 	 * Check whether an invalid uart number has been specified, and
 	 * if so, search for the first available port that does have
 	 * console support.
 	 */
 	if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports))
 		co->index = 0;
 	sport = &netx_ports[co->index];

 	if (options) {
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	} else {
 		/* if the UART is enabled, assume it has been correctly setup
 		 * by the bootloader and get the options
 		 */
 		if (readl(sport->port.membase + UART_CR) & CR_UART_EN) {
 			netx_console_get_options(&sport->port, &baud,
 			&parity, &bits, &flow);
 		}

 	}

 	return uart_set_options(&sport->port, co, baud, parity, bits, flow);
 }

 static struct uart_driver netx_reg;
 static struct console netx_console = {
 	.name		= "ttyNX",
 	.write		= netx_console_write,
 	.device		= uart_console_device,
 	.setup		= netx_console_setup,
 	.flags		= CON_PRINTBUFFER,
 	.index		= -1,
 	.data		= &netx_reg,
 };

 static int __init netx_console_init(void)
 {
 	register_console(&netx_console);
 	return 0;
 }
 console_initcall(netx_console_init);

 #define NETX_CONSOLE	&netx_console
 #else
 #define NETX_CONSOLE	NULL
 #endif

 static struct uart_driver netx_reg = {
 	.owner          = THIS_MODULE,
 	.driver_name    = DRIVER_NAME,
 	.dev_name       = "ttyNX",
 	.major          = SERIAL_NX_MAJOR,
 	.minor          = MINOR_START,
 	.nr             = ARRAY_SIZE(netx_ports),
 	.cons           = NETX_CONSOLE,
 };

 static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct netx_port *sport = platform_get_drvdata(pdev);

 	if (sport)
 		uart_suspend_port(&netx_reg, &sport->port);

 	return 0;
 }

 static int serial_netx_resume(struct platform_device *pdev)
 {
 	struct netx_port *sport = platform_get_drvdata(pdev);

 	if (sport)
 		uart_resume_port(&netx_reg, &sport->port);

 	return 0;
 }

 static int serial_netx_probe(struct platform_device *pdev)
 {
 	struct uart_port *port = &netx_ports[pdev->id].port;

 	dev_info(&pdev->dev, "initialising\n");

 	port->dev = &pdev->dev;

 	writel(1, port->membase + UART_RXFIFO_IRQLEVEL);
 	uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port);
 	platform_set_drvdata(pdev, &netx_ports[pdev->id]);

 	return 0;
 }

 static int serial_netx_remove(struct platform_device *pdev)
 {
 	struct netx_port *sport = platform_get_drvdata(pdev);

 	platform_set_drvdata(pdev, NULL);

 	if (sport)
 		uart_remove_one_port(&netx_reg, &sport->port);

 	return 0;
 }

 static struct platform_driver serial_netx_driver = {
 	.probe          = serial_netx_probe,
 	.remove         = serial_netx_remove,

 	.suspend	= serial_netx_suspend,
 	.resume		= serial_netx_resume,

 	.driver		= {
 		.name   = DRIVER_NAME,
 		.owner	= THIS_MODULE,
 	},
 };

 static int __init netx_serial_init(void)
 {
 	int ret;

 	printk(KERN_INFO "Serial: NetX driver\n");

 	ret = uart_register_driver(&netx_reg);
 	if (ret)
 		return ret;

 	ret = platform_driver_register(&serial_netx_driver);
 	if (ret != 0)
 		uart_unregister_driver(&netx_reg);

 	return 0;
 }

 static void __exit netx_serial_exit(void)
 {
 	platform_driver_unregister(&serial_netx_driver);
 	uart_unregister_driver(&netx_reg);
 }

 module_init(netx_serial_init);
 module_exit(netx_serial_exit);

 MODULE_AUTHOR("Sascha Hauer");
 MODULE_DESCRIPTION("NetX serial port driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DRIVER_NAME);
	/*
	* drivers/serial/netx-serial.c
	*
	* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2
	* as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/

	#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
	#define SUPPORT_SYSRQ
	#endif

	#include <linux/device.h>
	#include <linux/module.h>
	#include <linux/ioport.h>
	#include <linux/init.h>
	#include <linux/console.h>
	#include <linux/sysrq.h>
	#include <linux/platform_device.h>
	#include <linux/tty.h>
	#include <linux/tty_flip.h>
	#include <linux/serial_core.h>
	#include <linux/serial.h>

	#include <asm/io.h>
	#include <asm/irq.h>
	#include <asm/hardware.h>
	#include <asm/arch/netx-regs.h>

	/* We've been assigned a range on the "Low-density serial ports" major */
	#define SERIAL_NX_MAJOR 204
	#define MINOR_START 170

	#ifdef CONFIG_SERIAL_NETX_CONSOLE

	enum uart_regs {
	UART_DR = 0x00,
	UART_SR = 0x04,
	UART_LINE_CR = 0x08,
	UART_BAUDDIV_MSB = 0x0c,
	UART_BAUDDIV_LSB = 0x10,
	UART_CR = 0x14,
	UART_FR = 0x18,
	UART_IIR = 0x1c,
	UART_ILPR = 0x20,
	UART_RTS_CR = 0x24,
	UART_RTS_LEAD = 0x28,
	UART_RTS_TRAIL = 0x2c,
	UART_DRV_ENABLE = 0x30,
	UART_BRM_CR = 0x34,
	UART_RXFIFO_IRQLEVEL = 0x38,
	UART_TXFIFO_IRQLEVEL = 0x3c,
	};

	#define SR_FE (1<<0)
	#define SR_PE (1<<1)
	#define SR_BE (1<<2)
	#define SR_OE (1<<3)

	#define LINE_CR_BRK (1<<0)
	#define LINE_CR_PEN (1<<1)
	#define LINE_CR_EPS (1<<2)
	#define LINE_CR_STP2 (1<<3)
	#define LINE_CR_FEN (1<<4)
	#define LINE_CR_5BIT (0<<5)
	#define LINE_CR_6BIT (1<<5)
	#define LINE_CR_7BIT (2<<5)
	#define LINE_CR_8BIT (3<<5)
	#define LINE_CR_BITS_MASK (3<<5)

	#define CR_UART_EN (1<<0)
	#define CR_SIREN (1<<1)
	#define CR_SIRLP (1<<2)
	#define CR_MSIE (1<<3)
	#define CR_RIE (1<<4)
	#define CR_TIE (1<<5)
	#define CR_RTIE (1<<6)
	#define CR_LBE (1<<7)

	#define FR_CTS (1<<0)
	#define FR_DSR (1<<1)
	#define FR_DCD (1<<2)
	#define FR_BUSY (1<<3)
	#define FR_RXFE (1<<4)
	#define FR_TXFF (1<<5)
	#define FR_RXFF (1<<6)
	#define FR_TXFE (1<<7)

	#define IIR_MIS (1<<0)
	#define IIR_RIS (1<<1)
	#define IIR_TIS (1<<2)
	#define IIR_RTIS (1<<3)
	#define IIR_MASK 0xf

	#define RTS_CR_AUTO (1<<0)
	#define RTS_CR_RTS (1<<1)
	#define RTS_CR_COUNT (1<<2)
	#define RTS_CR_MOD2 (1<<3)
	#define RTS_CR_RTS_POL (1<<4)
	#define RTS_CR_CTS_CTR (1<<5)
	#define RTS_CR_CTS_POL (1<<6)
	#define RTS_CR_STICK (1<<7)

	#define UART_PORT_SIZE 0x40
	#define DRIVER_NAME "netx-uart"

	struct netx_port {
	struct uart_port port;
	};

	static void netx_stop_tx(struct uart_port *port)
	{
	unsigned int val;
	val = readl(port->membase + UART_CR);
	writel(val & ~CR_TIE, port->membase + UART_CR);
	}

	static void netx_stop_rx(struct uart_port *port)
	{
	unsigned int val;
	val = readl(port->membase + UART_CR);
	writel(val & ~CR_RIE, port->membase + UART_CR);
	}

	static void netx_enable_ms(struct uart_port *port)
	{
	unsigned int val;
	val = readl(port->membase + UART_CR);
	writel(val \| CR_MSIE, port->membase + UART_CR);
	}

	static inline void netx_transmit_buffer(struct uart_port *port)
	{
	struct circ_buf *xmit = &port->info->xmit;

	if (port->x_char) {
	writel(port->x_char, port->membase + UART_DR);
	port->icount.tx++;
	port->x_char = 0;
	return;
	}

	if (uart_tx_stopped(port) \|\| uart_circ_empty(xmit)) {
	netx_stop_tx(port);
	return;
	}

	do {
	/* send xmit->buf[xmit->tail]
	* out the port here */
	writel(xmit->buf[xmit->tail], port->membase + UART_DR);
	xmit->tail = (xmit->tail + 1) &
	(UART_XMIT_SIZE - 1);
	port->icount.tx++;
	if (uart_circ_empty(xmit))
	break;
	} while (!(readl(port->membase + UART_FR) & FR_TXFF));

	if (uart_circ_empty(xmit))
	netx_stop_tx(port);
	}

	static void netx_start_tx(struct uart_port *port)
	{
	writel(
	readl(port->membase + UART_CR) \| CR_TIE, port->membase + UART_CR);

	if (!(readl(port->membase + UART_FR) & FR_TXFF))
	netx_transmit_buffer(port);
	}

	static unsigned int netx_tx_empty(struct uart_port *port)
	{
	return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT;
	}

	static void netx_txint(struct uart_port *port)
	{
	struct circ_buf *xmit = &port->info->xmit;

	if (uart_circ_empty(xmit) \|\| uart_tx_stopped(port)) {
	netx_stop_tx(port);
	return;
	}

	netx_transmit_buffer(port);

	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
	uart_write_wakeup(port);
	}

	static void netx_rxint(struct uart_port *port)
	{
	unsigned char rx, flg, status;
	struct tty_struct *tty = port->info->tty;

	while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
	rx = readl(port->membase + UART_DR);
	flg = TTY_NORMAL;
	port->icount.rx++;
	status = readl(port->membase + UART_SR);
	if (status & SR_BE) {
	writel(0, port->membase + UART_SR);
	if (uart_handle_break(port))
	continue;
	}

	if (unlikely(status & (SR_FE \| SR_PE \| SR_OE))) {

	if (status & SR_PE)
	port->icount.parity++;
	else if (status & SR_FE)
	port->icount.frame++;
	if (status & SR_OE)
	port->icount.overrun++;

	status &= port->read_status_mask;

	if (status & SR_BE)
	flg = TTY_BREAK;
	else if (status & SR_PE)
	flg = TTY_PARITY;
	else if (status & SR_FE)
	flg = TTY_FRAME;
	}

	if (uart_handle_sysrq_char(port, rx))
	continue;

	uart_insert_char(port, status, SR_OE, rx, flg);
	}

	tty_flip_buffer_push(tty);
	return;
	}

	static irqreturn_t netx_int(int irq, void *dev_id)
	{
	struct uart_port *port = dev_id;
	unsigned long flags;
	unsigned char status;

	spin_lock_irqsave(&port->lock,flags);

	status = readl(port->membase + UART_IIR) & IIR_MASK;
	while (status) {
	if (status & IIR_RIS)
	netx_rxint(port);
	if (status & IIR_TIS)
	netx_txint(port);
	if (status & IIR_MIS) {
	if (readl(port->membase + UART_FR) & FR_CTS)
	uart_handle_cts_change(port, 1);
	else
	uart_handle_cts_change(port, 0);
	}
	writel(0, port->membase + UART_IIR);
	status = readl(port->membase + UART_IIR) & IIR_MASK;
	}

	spin_unlock_irqrestore(&port->lock,flags);
	return IRQ_HANDLED;
	}

	static unsigned int netx_get_mctrl(struct uart_port *port)
	{
	unsigned int ret = TIOCM_DSR \| TIOCM_CAR;

	if (readl(port->membase + UART_FR) & FR_CTS)
	ret \|= TIOCM_CTS;

	return ret;
	}

	static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl)
	{
	unsigned int val;

	/* FIXME: Locking needed ? */
	if (mctrl & TIOCM_RTS) {
	val = readl(port->membase + UART_RTS_CR);
	writel(val \| RTS_CR_RTS, port->membase + UART_RTS_CR);
	}
	}

	static void netx_break_ctl(struct uart_port *port, int break_state)
	{
	unsigned int line_cr;
	spin_lock_irq(&port->lock);

	line_cr = readl(port->membase + UART_LINE_CR);
	if (break_state != 0)
	line_cr \|= LINE_CR_BRK;
	else
	line_cr &= ~LINE_CR_BRK;
	writel(line_cr, port->membase + UART_LINE_CR);

	spin_unlock_irq(&port->lock);
	}

	static int netx_startup(struct uart_port *port)
	{
	int ret;

	ret = request_irq(port->irq, netx_int, 0,
	DRIVER_NAME, port);
	if (ret) {
	dev_err(port->dev, "unable to grab irq%d\n",port->irq);
	goto exit;
	}

	writel(readl(port->membase + UART_LINE_CR) \| LINE_CR_FEN,
	port->membase + UART_LINE_CR);

	writel(CR_MSIE \| CR_RIE \| CR_TIE \| CR_RTIE \| CR_UART_EN,
	port->membase + UART_CR);

	exit:
	return ret;
	}

	static void netx_shutdown(struct uart_port *port)
	{
	writel(0, port->membase + UART_CR) ;

	free_irq(port->irq, port);
	}

	static void
	netx_set_termios(struct uart_port port, struct ktermios termios,
	struct ktermios *old)
	{
	unsigned int baud, quot;
	unsigned char old_cr;
	unsigned char line_cr = LINE_CR_FEN;
	unsigned char rts_cr = 0;

	switch (termios->c_cflag & CSIZE) {
	case CS5:
	line_cr \|= LINE_CR_5BIT;
	break;
	case CS6:
	line_cr \|= LINE_CR_6BIT;
	break;
	case CS7:
	line_cr \|= LINE_CR_7BIT;
	break;
	case CS8:
	line_cr \|= LINE_CR_8BIT;
	break;
	}

	if (termios->c_cflag & CSTOPB)
	line_cr \|= LINE_CR_STP2;

	if (termios->c_cflag & PARENB) {
	line_cr \|= LINE_CR_PEN;
	if (!(termios->c_cflag & PARODD))
	line_cr \|= LINE_CR_EPS;
	}

	if (termios->c_cflag & CRTSCTS)
	rts_cr = RTS_CR_AUTO \| RTS_CR_CTS_CTR \| RTS_CR_RTS_POL;

	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
	quot = baud * 4096;
	quot /= 1000;
	quot *= 256;
	quot /= 100000;

	spin_lock_irq(&port->lock);

	uart_update_timeout(port, termios->c_cflag, baud);

	old_cr = readl(port->membase + UART_CR);

	/* disable interrupts */
	writel(old_cr & ~(CR_MSIE \| CR_RIE \| CR_TIE \| CR_RTIE),
	port->membase + UART_CR);

	/* drain transmitter */
	while (readl(port->membase + UART_FR) & FR_BUSY);

	/* disable UART */
	writel(old_cr & ~CR_UART_EN, port->membase + UART_CR);

	/* modem status interrupts */
	old_cr &= ~CR_MSIE;
	if (UART_ENABLE_MS(port, termios->c_cflag))
	old_cr \|= CR_MSIE;

	writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB);
	writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB);
	writel(line_cr, port->membase + UART_LINE_CR);

	writel(rts_cr, port->membase + UART_RTS_CR);

	/*
	* Characters to ignore
	*/
	port->ignore_status_mask = 0;
	if (termios->c_iflag & IGNPAR)
	port->ignore_status_mask \|= SR_PE;
	if (termios->c_iflag & IGNBRK) {
	port->ignore_status_mask \|= SR_BE;
	/*
	* If we're ignoring parity and break indicators,
	* ignore overruns too (for real raw support).
	*/
	if (termios->c_iflag & IGNPAR)
	port->ignore_status_mask \|= SR_PE;
	}

	port->read_status_mask = 0;
	if (termios->c_iflag & (BRKINT \| PARMRK))
	port->read_status_mask \|= SR_BE;
	if (termios->c_iflag & INPCK)
	port->read_status_mask \|= SR_PE \| SR_FE;

	writel(old_cr, port->membase + UART_CR);

	spin_unlock_irq(&port->lock);
	}

	static const char netx_type(struct uart_port port)
	{
	return port->type == PORT_NETX ? "NETX" : NULL;
	}

	static void netx_release_port(struct uart_port *port)
	{
	release_mem_region(port->mapbase, UART_PORT_SIZE);
	}

	static int netx_request_port(struct uart_port *port)
	{
	return request_mem_region(port->mapbase, UART_PORT_SIZE,
	DRIVER_NAME) != NULL ? 0 : -EBUSY;
	}

	static void netx_config_port(struct uart_port *port, int flags)
	{
	if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0)
	port->type = PORT_NETX;
	}

	static int
	netx_verify_port(struct uart_port port, struct serial_struct ser)
	{
	int ret = 0;

	if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX)
	ret = -EINVAL;

	return ret;
	}

	static struct uart_ops netx_pops = {
	.tx_empty = netx_tx_empty,
	.set_mctrl = netx_set_mctrl,
	.get_mctrl = netx_get_mctrl,
	.stop_tx = netx_stop_tx,
	.start_tx = netx_start_tx,
	.stop_rx = netx_stop_rx,
	.enable_ms = netx_enable_ms,
	.break_ctl = netx_break_ctl,
	.startup = netx_startup,
	.shutdown = netx_shutdown,
	.set_termios = netx_set_termios,
	.type = netx_type,
	.release_port = netx_release_port,
	.request_port = netx_request_port,
	.config_port = netx_config_port,
	.verify_port = netx_verify_port,
	};

	static struct netx_port netx_ports[] = {
	{
	.port = {
	.type = PORT_NETX,
	.iotype = UPIO_MEM,
	.membase = (char __iomem *)io_p2v(NETX_PA_UART0),
	.mapbase = NETX_PA_UART0,
	.irq = NETX_IRQ_UART0,
	.uartclk = 100000000,
	.fifosize = 16,
	.flags = UPF_BOOT_AUTOCONF,
	.ops = &netx_pops,
	.line = 0,
	},
	}, {
	.port = {
	.type = PORT_NETX,
	.iotype = UPIO_MEM,
	.membase = (char __iomem *)io_p2v(NETX_PA_UART1),
	.mapbase = NETX_PA_UART1,
	.irq = NETX_IRQ_UART1,
	.uartclk = 100000000,
	.fifosize = 16,
	.flags = UPF_BOOT_AUTOCONF,
	.ops = &netx_pops,
	.line = 1,
	},
	}, {
	.port = {
	.type = PORT_NETX,
	.iotype = UPIO_MEM,
	.membase = (char __iomem *)io_p2v(NETX_PA_UART2),
	.mapbase = NETX_PA_UART2,
	.irq = NETX_IRQ_UART2,
	.uartclk = 100000000,
	.fifosize = 16,
	.flags = UPF_BOOT_AUTOCONF,
	.ops = &netx_pops,
	.line = 2,
	},
	}
	};

	static void netx_console_putchar(struct uart_port *port, int ch)
	{
	while (readl(port->membase + UART_FR) & FR_BUSY);
	writel(ch, port->membase + UART_DR);
	}

	static void
	netx_console_write(struct console co, const char s, unsigned int count)
	{
	struct uart_port *port = &netx_ports[co->index].port;
	unsigned char cr_save;

	cr_save = readl(port->membase + UART_CR);
	writel(cr_save \| CR_UART_EN, port->membase + UART_CR);

	uart_console_write(port, s, count, netx_console_putchar);

	while (readl(port->membase + UART_FR) & FR_BUSY);
	writel(cr_save, port->membase + UART_CR);
	}

	static void __init
	netx_console_get_options(struct uart_port port, int baud,
	int parity, int bits, int *flow)
	{
	unsigned char line_cr;

	*baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) \|
	readl(port->membase + UART_BAUDDIV_LSB);
	baud = 1000;
	*baud /= 4096;
	baud = 1000;
	*baud /= 256;
	baud = 100;

	line_cr = readl(port->membase + UART_LINE_CR);
	*parity = 'n';
	if (line_cr & LINE_CR_PEN) {
	if (line_cr & LINE_CR_EPS)
	*parity = 'e';
	else
	*parity = 'o';
	}

	switch (line_cr & LINE_CR_BITS_MASK) {
	case LINE_CR_8BIT:
	*bits = 8;
	break;
	case LINE_CR_7BIT:
	*bits = 7;
	break;
	case LINE_CR_6BIT:
	*bits = 6;
	break;
	case LINE_CR_5BIT:
	*bits = 5;
	break;
	}

	if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO)
	*flow = 'r';
	}

	static int __init
	netx_console_setup(struct console co, char options)
	{
	struct netx_port *sport;
	int baud = 9600;
	int bits = 8;
	int parity = 'n';
	int flow = 'n';

	/*
	* Check whether an invalid uart number has been specified, and
	* if so, search for the first available port that does have
	* console support.
	*/
	if (co->index == -1 \|\| co->index >= ARRAY_SIZE(netx_ports))
	co->index = 0;
	sport = &netx_ports[co->index];

	if (options) {
	uart_parse_options(options, &baud, &parity, &bits, &flow);
	} else {
	/* if the UART is enabled, assume it has been correctly setup
	* by the bootloader and get the options
	*/
	if (readl(sport->port.membase + UART_CR) & CR_UART_EN) {
	netx_console_get_options(&sport->port, &baud,
	&parity, &bits, &flow);
	}

	}

	return uart_set_options(&sport->port, co, baud, parity, bits, flow);
	}

	static struct uart_driver netx_reg;
	static struct console netx_console = {
	.name = "ttyNX",
	.write = netx_console_write,
	.device = uart_console_device,
	.setup = netx_console_setup,
	.flags = CON_PRINTBUFFER,
	.index = -1,
	.data = &netx_reg,
	};

	static int __init netx_console_init(void)
	{
	register_console(&netx_console);
	return 0;
	}
	console_initcall(netx_console_init);

	#define NETX_CONSOLE &netx_console
	#else
	#define NETX_CONSOLE NULL
	#endif

	static struct uart_driver netx_reg = {
	.owner = THIS_MODULE,
	.driver_name = DRIVER_NAME,
	.dev_name = "ttyNX",
	.major = SERIAL_NX_MAJOR,
	.minor = MINOR_START,
	.nr = ARRAY_SIZE(netx_ports),
	.cons = NETX_CONSOLE,
	};

	static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state)
	{
	struct netx_port *sport = platform_get_drvdata(pdev);

	if (sport)
	uart_suspend_port(&netx_reg, &sport->port);

	return 0;
	}

	static int serial_netx_resume(struct platform_device *pdev)
	{
	struct netx_port *sport = platform_get_drvdata(pdev);

	if (sport)
	uart_resume_port(&netx_reg, &sport->port);

	return 0;
	}

	static int serial_netx_probe(struct platform_device *pdev)
	{
	struct uart_port *port = &netx_ports[pdev->id].port;

	dev_info(&pdev->dev, "initialising\n");

	port->dev = &pdev->dev;

	writel(1, port->membase + UART_RXFIFO_IRQLEVEL);
	uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port);
	platform_set_drvdata(pdev, &netx_ports[pdev->id]);

	return 0;
	}

	static int serial_netx_remove(struct platform_device *pdev)
	{
	struct netx_port *sport = platform_get_drvdata(pdev);

	platform_set_drvdata(pdev, NULL);

	if (sport)
	uart_remove_one_port(&netx_reg, &sport->port);

	return 0;
	}

	static struct platform_driver serial_netx_driver = {
	.probe = serial_netx_probe,
	.remove = serial_netx_remove,

	.suspend = serial_netx_suspend,
	.resume = serial_netx_resume,

	.driver = {
	.name = DRIVER_NAME,
	.owner = THIS_MODULE,
	},
	};

	static int __init netx_serial_init(void)
	{
	int ret;

	printk(KERN_INFO "Serial: NetX driver\n");

	ret = uart_register_driver(&netx_reg);
	if (ret)
	return ret;

	ret = platform_driver_register(&serial_netx_driver);
	if (ret != 0)
	uart_unregister_driver(&netx_reg);

	return 0;
	}

	static void __exit netx_serial_exit(void)
	{
	platform_driver_unregister(&serial_netx_driver);
	uart_unregister_driver(&netx_reg);
	}

	module_init(netx_serial_init);
	module_exit(netx_serial_exit);

	MODULE_AUTHOR("Sascha Hauer");
	MODULE_DESCRIPTION("NetX serial port driver");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("platform:" DRIVER_NAME);