ARM: ux500: adjust the TC3589x devices to the binding
The TC3589x devices appearing in the ST Ericsson device trees
are adjusted to use the new binding so this is in a good shape,
and we add the keypad on the TVK1281618 UIB so this is working
again.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 76d3ef1..61b180e 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -15,26 +15,53 @@
/ {
soc {
- /* Add Synaptics touch screen, TC35892 keypad etc here */
+ /* Add Synaptics touch screen, TC35893 keypad etc here */
i2c@80004000 {
- tc3589x@44 {
- compatible = "tc3589x";
+ tc35893@44 {
+ compatible = "toshiba,tc35893";
reg = <0x44>;
interrupt-parent = <&gpio6>;
interrupts = <26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
tc3589x_gpio {
- compatible = "tc3589x-gpio";
- interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ compatible = "toshiba,tc3589x-gpio";
+ interrupts = <0>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
+ tc3589x_keypad {
+ compatible = "toshiba,tc3589x-keypad";
+ interrupts = <6>;
+ debounce-delay-ms = <4>;
+ keypad,num-columns = <8>;
+ keypad,num-rows = <8>;
+ linux,no-autorepeat;
+ linux,wakeup;
+ linux,keymap = <0x0301006b
+ 0x04010066
+ 0x06040072
+ 0x040200d7
+ 0x0303006a
+ 0x0205000e
+ 0x0607008b
+ 0x0500001c
+ 0x0403000b
+ 0x03040034
+ 0x05020067
+ 0x0305006c
+ 0x040500e7
+ 0x0005009e
+ 0x06020073
+ 0x01030039
+ 0x07060069
+ 0x050500d9>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index b2cd7bc..6b271a4 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -28,18 +28,18 @@
reg = <0x33>;
};
- tc3589x@42 {
- compatible = "tc3589x";
+ tc35892@42 {
+ compatible = "toshiba,tc35892";
reg = <0x42>;
interrupt-parent = <&gpio6>;
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
tc3589x_gpio: tc3589x_gpio {
compatible = "tc3589x-gpio";
- interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <0>;
interrupt-controller;
#interrupt-cells = <2>;