[PATCH] USB: whitespace removal from usb/gadget/ether
This removes extraneous whitespace from the Ethernet/RNDIS gadget driver.
It's all space-at-EOL, spaces-before-tabs, or tabs-then-spaces.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index bd60c81..fc46840 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -101,9 +101,9 @@
/* CDC and RNDIS support the same host-chosen outgoing packet filters. */
#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
- |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
- |USB_CDC_PACKET_TYPE_PROMISCUOUS \
- |USB_CDC_PACKET_TYPE_DIRECTED)
+ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+ |USB_CDC_PACKET_TYPE_PROMISCUOUS \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
/*-------------------------------------------------------------------------*/
@@ -318,7 +318,7 @@
#define DEFAULT_QLEN 2 /* double buffering by default */
/* peak bulk transfer bits-per-second */
-#define HS_BPS (13 * 512 * 8 * 1000 * 8)
+#define HS_BPS (13 * 512 * 8 * 1000 * 8)
#define FS_BPS (19 * 64 * 1 * 1000 * 8)
#ifdef CONFIG_USB_GADGET_DUALSPEED
@@ -466,7 +466,7 @@
};
#ifdef CONFIG_USB_ETH_RNDIS
-static struct usb_config_descriptor
+static struct usb_config_descriptor
rndis_config = {
.bLength = sizeof rndis_config,
.bDescriptorType = USB_DT_CONFIG,
@@ -511,7 +511,7 @@
rndis_control_intf = {
.bLength = sizeof rndis_control_intf,
.bDescriptorType = USB_DT_INTERFACE,
-
+
.bInterfaceNumber = 0,
.bNumEndpoints = 1,
.bInterfaceClass = USB_CLASS_COMM,
@@ -545,20 +545,20 @@
#ifdef CONFIG_USB_ETH_RNDIS
static const struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = {
- .bLength = sizeof call_mgmt_descriptor,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
+ .bLength = sizeof call_mgmt_descriptor,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
- .bmCapabilities = 0x00,
- .bDataInterface = 0x01,
+ .bmCapabilities = 0x00,
+ .bDataInterface = 0x01,
};
static const struct usb_cdc_acm_descriptor acm_descriptor = {
- .bLength = sizeof acm_descriptor,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_ACM_TYPE,
+ .bLength = sizeof acm_descriptor,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ACM_TYPE,
- .bmCapabilities = 0x00,
+ .bmCapabilities = 0x00,
};
#endif
@@ -595,7 +595,7 @@
* RNDIS requires the status endpoint, since it uses that encapsulation
* mechanism for its funky RPC scheme.
*/
-
+
#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
#define STATUS_BYTECOUNT 16 /* 8 byte header + data */
@@ -978,7 +978,7 @@
result = usb_ep_enable (dev->status_ep, dev->status);
if (result != 0) {
- DEBUG (dev, "enable %s --> %d\n",
+ DEBUG (dev, "enable %s --> %d\n",
dev->status_ep->name, result);
goto done;
}
@@ -1002,14 +1002,14 @@
if (!cdc_active(dev)) {
result = usb_ep_enable (dev->in_ep, dev->in);
if (result != 0) {
- DEBUG(dev, "enable %s --> %d\n",
+ DEBUG(dev, "enable %s --> %d\n",
dev->in_ep->name, result);
goto done;
}
result = usb_ep_enable (dev->out_ep, dev->out);
if (result != 0) {
- DEBUG (dev, "enable %s --> %d\n",
+ DEBUG (dev, "enable %s --> %d\n",
dev->out_ep->name, result);
goto done;
}
@@ -1144,7 +1144,7 @@
#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_SPEED_HIGH: speed = "high"; break;
#endif
- default: speed = "?"; break;
+ default: speed = "?"; break;
}
dev->config = number;
@@ -1206,7 +1206,7 @@
struct usb_request *req = dev->stat_req;
struct usb_cdc_notification *event;
int value;
-
+
DEBUG (dev, "%s, flush old status first\n", __FUNCTION__);
/* flush old status
@@ -1268,7 +1268,7 @@
{
struct eth_dev *dev = ep->driver_data;
int status;
-
+
/* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
spin_lock(&dev->lock);
status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf);
@@ -1472,7 +1472,7 @@
#endif /* DEV_CONFIG_CDC */
-#ifdef CONFIG_USB_ETH_RNDIS
+#ifdef CONFIG_USB_ETH_RNDIS
/* RNDIS uses the CDC command encapsulation mechanism to implement
* an RPC scheme, with much getting/setting of attributes by OID.
*/
@@ -1489,7 +1489,7 @@
req->complete = rndis_command_complete;
/* later, rndis_control_ack () sends a notification */
break;
-
+
case USB_CDC_GET_ENCAPSULATED_RESPONSE:
if ((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE)
== ctrl->bRequestType
@@ -1641,7 +1641,7 @@
DEBUG (dev, "no rx skb\n");
goto enomem;
}
-
+
/* Some platforms perform better when IP packets are aligned,
* but on at least one, checksumming fails otherwise. Note:
* RNDIS headers involve variable numbers of LE32 values.
@@ -1720,7 +1720,7 @@
case -EOVERFLOW:
dev->stats.rx_over_errors++;
// FALLTHROUGH
-
+
default:
dev->stats.rx_errors++;
DEBUG (dev, "rx status %d\n", status);
@@ -1915,7 +1915,7 @@
sizeof (struct rndis_packet_msg_type));
if (!skb_rndis)
goto drop;
-
+
dev_kfree_skb_any (skb);
skb = skb_rndis;
rndis_add_hdr (skb);
@@ -2001,7 +2001,7 @@
struct eth_dev *dev = netdev_priv(net);
u32 length;
struct usb_request *resp = dev->stat_req;
-
+
/* in case RNDIS calls this after disconnect */
if (!dev->status) {
DEBUG (dev, "status ENODEV\n");
@@ -2021,16 +2021,16 @@
resp->length = 8;
resp->complete = rndis_control_ack_complete;
resp->context = dev;
-
+
*((__le32 *) resp->buf) = __constant_cpu_to_le32 (1);
*((__le32 *) resp->buf + 1) = __constant_cpu_to_le32 (0);
-
+
length = usb_ep_queue (dev->status_ep, resp, GFP_ATOMIC);
if (length < 0) {
resp->status = 0;
rndis_control_ack_complete (dev->status_ep, resp);
}
-
+
return 0;
}
@@ -2047,7 +2047,7 @@
/* fill the rx queue */
rx_fill (dev, gfp_flags);
- /* and open the tx floodgates */
+ /* and open the tx floodgates */
atomic_set (&dev->tx_qlen, 0);
netif_wake_queue (dev->net);
if (rndis_active(dev)) {
@@ -2076,7 +2076,7 @@
netif_stop_queue (net);
DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
- dev->stats.rx_packets, dev->stats.tx_packets,
+ dev->stats.rx_packets, dev->stats.tx_packets,
dev->stats.rx_errors, dev->stats.tx_errors
);
@@ -2095,7 +2095,7 @@
usb_ep_enable (dev->status_ep, dev->status);
}
}
-
+
if (rndis_active(dev)) {
rndis_set_param_medium (dev->rndis_config,
NDIS_MEDIUM_802_3, 0);
@@ -2301,7 +2301,7 @@
return -ENODEV;
}
in_ep->driver_data = in_ep; /* claim */
-
+
out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
if (!out_ep)
goto autoconf_fail;
@@ -2374,8 +2374,8 @@
#endif
}
- net = alloc_etherdev (sizeof *dev);
- if (!net)
+ net = alloc_etherdev (sizeof *dev);
+ if (!net)
return status;
dev = netdev_priv(net);
spin_lock_init (&dev->lock);
@@ -2454,7 +2454,7 @@
dev->gadget = gadget;
set_gadget_data (gadget, dev);
gadget->ep0->driver_data = dev;
-
+
/* two kinds of host-initiated state changes:
* - iff DATA transfer is active, carrier is "on"
* - tx queueing enabled if open *and* carrier is "on"
@@ -2462,8 +2462,8 @@
netif_stop_queue (dev->net);
netif_carrier_off (dev->net);
- SET_NETDEV_DEV (dev->net, &gadget->dev);
- status = register_netdev (dev->net);
+ SET_NETDEV_DEV (dev->net, &gadget->dev);
+ status = register_netdev (dev->net);
if (status < 0)
goto fail1;
@@ -2488,7 +2488,7 @@
u32 vendorID = 0;
/* FIXME RNDIS vendor id == "vendor NIC code" == ? */
-
+
dev->rndis_config = rndis_register (rndis_control_ack);
if (dev->rndis_config < 0) {
fail0:
@@ -2496,7 +2496,7 @@
status = -ENODEV;
goto fail;
}
-
+
/* these set up a lot of the OIDs that RNDIS needs */
rndis_set_host_mac (dev->rndis_config, dev->host_mac);
if (rndis_set_param_dev (dev->rndis_config, dev->net,
@@ -2556,7 +2556,7 @@
.suspend = eth_suspend,
.resume = eth_resume,
- .driver = {
+ .driver = {
.name = (char *) shortname,
.owner = THIS_MODULE,
},