drivers/i2c/busses/i2c-viapro.c - kernel/msm-4.9 - Gitiles

 /*
     Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
     Mark D. Studebaker <mdsxyz123@yahoo.com>
     Copyright (C) 2005 - 2008  Jean Delvare <khali@linux-fr.org>

     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

 /*
    Supports the following VIA south bridges:

    Chip name          PCI ID  REV     I2C block
    VT82C596A          0x3050             no
    VT82C596B          0x3051             no
    VT82C686A          0x3057  0x30       no
    VT82C686B          0x3057  0x40       yes
    VT8231             0x8235             no?
    VT8233             0x3074             yes
    VT8233A            0x3147             yes?
    VT8235             0x3177             yes
    VT8237R            0x3227             yes
    VT8237A            0x3337             yes
    VT8237S            0x3372             yes
    VT8251             0x3287             yes
    CX700              0x8324             yes
    VX800/VX820        0x8353             yes
    VX855/VX875        0x8409             yes

    Note: we assume there can only be one device, with one SMBus interface.
 */

 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/stddef.h>
 #include <linux/ioport.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/io.h>

 static struct pci_dev *vt596_pdev;

 #define SMBBA1		0x90
 #define SMBBA2		0x80
 #define SMBBA3		0xD0

 /* SMBus address offsets */
 static unsigned short vt596_smba;
 #define SMBHSTSTS	(vt596_smba + 0)
 #define SMBHSTCNT	(vt596_smba + 2)
 #define SMBHSTCMD	(vt596_smba + 3)
 #define SMBHSTADD	(vt596_smba + 4)
 #define SMBHSTDAT0	(vt596_smba + 5)
 #define SMBHSTDAT1	(vt596_smba + 6)
 #define SMBBLKDAT	(vt596_smba + 7)

 /* PCI Address Constants */

 /* SMBus data in configuration space can be found in two places,
    We try to select the better one */

 static unsigned short SMBHSTCFG = 0xD2;

 /* Other settings */
 #define MAX_TIMEOUT	500

 /* VT82C596 constants */
 #define VT596_QUICK		0x00
 #define VT596_BYTE		0x04
 #define VT596_BYTE_DATA		0x08
 #define VT596_WORD_DATA		0x0C
 #define VT596_PROC_CALL		0x10
 #define VT596_BLOCK_DATA	0x14
 #define VT596_I2C_BLOCK_DATA	0x34


 /* If force is set to anything different from 0, we forcibly enable the
    VT596. DANGEROUS! */
 static bool force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!");

 /* If force_addr is set to anything different from 0, we forcibly enable
    the VT596 at the given address. VERY DANGEROUS! */
 static u16 force_addr;
 module_param(force_addr, ushort, 0);
 MODULE_PARM_DESC(force_addr,
 		 "Forcibly enable the SMBus at the given address. "
 		 "EXTREMELY DANGEROUS!");


 static struct pci_driver vt596_driver;
 static struct i2c_adapter vt596_adapter;

 #define FEATURE_I2CBLOCK	(1<<0)
 static unsigned int vt596_features;

 #ifdef DEBUG
 static void vt596_dump_regs(const char *msg, u8 size)
 {
 	dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x "
 		"DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
 		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
 		inb_p(SMBHSTDAT1));

 	if (size == VT596_BLOCK_DATA
 	 || size == VT596_I2C_BLOCK_DATA) {
 		int i;

 		dev_dbg(&vt596_adapter.dev, "BLK=");
 		for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++)
 			printk("%02x,", inb_p(SMBBLKDAT));
 		printk("\n");
 		dev_dbg(&vt596_adapter.dev, "    ");
 		for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++)
 			printk("%02x,", inb_p(SMBBLKDAT));
 		printk("%02x\n", inb_p(SMBBLKDAT));
 	}
 }
 #else
 static inline void vt596_dump_regs(const char *msg, u8 size) { }
 #endif

 /* Return -1 on error, 0 on success */
 static int vt596_transaction(u8 size)
 {
 	int temp;
 	int result = 0;
 	int timeout = 0;

 	vt596_dump_regs("Transaction (pre)", size);

 	/* Make sure the SMBus host is ready to start transmitting */
 	if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
 		dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
 			"Resetting...\n", temp);

 		outb_p(temp, SMBHSTSTS);
 		if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
 			dev_err(&vt596_adapter.dev, "SMBus reset failed! "
 				"(0x%02x)\n", temp);
 			return -EBUSY;
 		}
 	}

 	/* Start the transaction by setting bit 6 */
 	outb_p(0x40 | size, SMBHSTCNT);

 	/* We will always wait for a fraction of a second */
 	do {
 		msleep(1);
 		temp = inb_p(SMBHSTSTS);
 	} while ((temp & 0x01) && (++timeout < MAX_TIMEOUT));

 	/* If the SMBus is still busy, we give up */
 	if (timeout == MAX_TIMEOUT) {
 		result = -ETIMEDOUT;
 		dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
 	}

 	if (temp & 0x10) {
 		result = -EIO;
 		dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
 			size);
 	}

 	if (temp & 0x08) {
 		result = -EIO;
 		dev_err(&vt596_adapter.dev, "SMBus collision!\n");
 	}

 	if (temp & 0x04) {
 		result = -ENXIO;
 		dev_dbg(&vt596_adapter.dev, "No response\n");
 	}

 	/* Resetting status register */
 	if (temp & 0x1F)
 		outb_p(temp, SMBHSTSTS);

 	vt596_dump_regs("Transaction (post)", size);

 	return result;
 }

 /* Return negative errno on error, 0 on success */
 static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
 		unsigned short flags, char read_write, u8 command,
 		int size, union i2c_smbus_data *data)
 {
 	int i;
 	int status;

 	switch (size) {
 	case I2C_SMBUS_QUICK:
 		size = VT596_QUICK;
 		break;
 	case I2C_SMBUS_BYTE:
 		if (read_write == I2C_SMBUS_WRITE)
 			outb_p(command, SMBHSTCMD);
 		size = VT596_BYTE;
 		break;
 	case I2C_SMBUS_BYTE_DATA:
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE)
 			outb_p(data->byte, SMBHSTDAT0);
 		size = VT596_BYTE_DATA;
 		break;
 	case I2C_SMBUS_WORD_DATA:
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE) {
 			outb_p(data->word & 0xff, SMBHSTDAT0);
 			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
 		}
 		size = VT596_WORD_DATA;
 		break;
 	case I2C_SMBUS_PROC_CALL:
 		outb_p(command, SMBHSTCMD);
 		outb_p(data->word & 0xff, SMBHSTDAT0);
 		outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
 		size = VT596_PROC_CALL;
 		break;
 	case I2C_SMBUS_I2C_BLOCK_DATA:
 		if (!(vt596_features & FEATURE_I2CBLOCK))
 			goto exit_unsupported;
 		if (read_write == I2C_SMBUS_READ)
 			outb_p(data->block[0], SMBHSTDAT0);
 		/* Fall through */
 	case I2C_SMBUS_BLOCK_DATA:
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE) {
 			u8 len = data->block[0];
 			if (len > I2C_SMBUS_BLOCK_MAX)
 				len = I2C_SMBUS_BLOCK_MAX;
 			outb_p(len, SMBHSTDAT0);
 			inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
 			for (i = 1; i <= len; i++)
 				outb_p(data->block[i], SMBBLKDAT);
 		}
 		size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
 		       VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
 		break;
 	default:
 		goto exit_unsupported;
 	}

 	outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);

 	status = vt596_transaction(size);
 	if (status)
 		return status;

 	if (size == VT596_PROC_CALL)
 		read_write = I2C_SMBUS_READ;

 	if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
 		return 0;

 	switch (size) {
 	case VT596_BYTE:
 	case VT596_BYTE_DATA:
 		data->byte = inb_p(SMBHSTDAT0);
 		break;
 	case VT596_WORD_DATA:
 	case VT596_PROC_CALL:
 		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
 		break;
 	case VT596_I2C_BLOCK_DATA:
 	case VT596_BLOCK_DATA:
 		data->block[0] = inb_p(SMBHSTDAT0);
 		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
 			data->block[0] = I2C_SMBUS_BLOCK_MAX;
 		inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
 		for (i = 1; i <= data->block[0]; i++)
 			data->block[i] = inb_p(SMBBLKDAT);
 		break;
 	}
 	return 0;

 exit_unsupported:
 	dev_warn(&vt596_adapter.dev, "Unsupported transaction %d\n",
 		 size);
 	return -EOPNOTSUPP;
 }

 static u32 vt596_func(struct i2c_adapter *adapter)
 {
 	u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
 	    I2C_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA;

 	if (vt596_features & FEATURE_I2CBLOCK)
 		func |= I2C_FUNC_SMBUS_I2C_BLOCK;
 	return func;
 }

 static const struct i2c_algorithm smbus_algorithm = {
 	.smbus_xfer	= vt596_access,
 	.functionality	= vt596_func,
 };

 static struct i2c_adapter vt596_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };

 static int __devinit vt596_probe(struct pci_dev *pdev,
 				 const struct pci_device_id *id)
 {
 	unsigned char temp;
 	int error;

 	/* Determine the address of the SMBus areas */
 	if (force_addr) {
 		vt596_smba = force_addr & 0xfff0;
 		force = 0;
 		goto found;
 	}

 	if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
 	    !(vt596_smba & 0x0001)) {
 		/* try 2nd address and config reg. for 596 */
 		if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
 		    !pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
 		    (vt596_smba & 0x0001)) {
 			SMBHSTCFG = 0x84;
 		} else {
 			/* no matches at all */
 			dev_err(&pdev->dev, "Cannot configure "
 				"SMBus I/O Base address\n");
 			return -ENODEV;
 		}
 	}

 	vt596_smba &= 0xfff0;
 	if (vt596_smba == 0) {
 		dev_err(&pdev->dev, "SMBus base address "
 			"uninitialized - upgrade BIOS or use "
 			"force_addr=0xaddr\n");
 		return -ENODEV;
 	}

 found:
 	error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
 	if (error)
 		return -ENODEV;

 	if (!request_region(vt596_smba, 8, vt596_driver.name)) {
 		dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
 			vt596_smba);
 		return -ENODEV;
 	}

 	pci_read_config_byte(pdev, SMBHSTCFG, &temp);
 	/* If force_addr is set, we program the new address here. Just to make
 	   sure, we disable the VT596 first. */
 	if (force_addr) {
 		pci_write_config_byte(pdev, SMBHSTCFG, temp & 0xfe);
 		pci_write_config_word(pdev, id->driver_data, vt596_smba);
 		pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
 		dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
 			 "address 0x%04x!\n", vt596_smba);
 	} else if (!(temp & 0x01)) {
 		if (force) {
 			/* NOTE: This assumes I/O space and other allocations
 			 * WERE done by the Bios!  Don't complain if your
 			 * hardware does weird things after enabling this.
 			 * :') Check for Bios updates before resorting to
 			 * this.
 			 */
 			pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
 			dev_info(&pdev->dev, "Enabling SMBus device\n");
 		} else {
 			dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
 				"controller not enabled! - upgrade BIOS or "
 				"use force=1\n");
 			error = -ENODEV;
 			goto release_region;
 		}
 	}

 	dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);

 	switch (pdev->device) {
 	case PCI_DEVICE_ID_VIA_CX700:
 	case PCI_DEVICE_ID_VIA_VX800:
 	case PCI_DEVICE_ID_VIA_VX855:
 	case PCI_DEVICE_ID_VIA_VX900:
 	case PCI_DEVICE_ID_VIA_8251:
 	case PCI_DEVICE_ID_VIA_8237:
 	case PCI_DEVICE_ID_VIA_8237A:
 	case PCI_DEVICE_ID_VIA_8237S:
 	case PCI_DEVICE_ID_VIA_8235:
 	case PCI_DEVICE_ID_VIA_8233A:
 	case PCI_DEVICE_ID_VIA_8233_0:
 		vt596_features |= FEATURE_I2CBLOCK;
 		break;
 	case PCI_DEVICE_ID_VIA_82C686_4:
 		/* The VT82C686B (rev 0x40) does support I2C block
 		   transactions, but the VT82C686A (rev 0x30) doesn't */
 		if (pdev->revision >= 0x40)
 			vt596_features |= FEATURE_I2CBLOCK;
 		break;
 	}

 	vt596_adapter.dev.parent = &pdev->dev;
 	snprintf(vt596_adapter.name, sizeof(vt596_adapter.name),
 		 "SMBus Via Pro adapter at %04x", vt596_smba);

 	vt596_pdev = pci_dev_get(pdev);
 	error = i2c_add_adapter(&vt596_adapter);
 	if (error) {
 		pci_dev_put(vt596_pdev);
 		vt596_pdev = NULL;
 		goto release_region;
 	}

 	/* Always return failure here.  This is to allow other drivers to bind
 	 * to this pci device.  We don't really want to have control over the
 	 * pci device, we only wanted to read as few register values from it.
 	 */
 	return -ENODEV;

 release_region:
 	release_region(vt596_smba, 8);
 	return error;
 }

 static DEFINE_PCI_DEVICE_TABLE(vt596_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3),
 	  .driver_data = SMBBA1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3),
 	  .driver_data = SMBBA1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4),
 	  .driver_data = SMBBA1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237S),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4),
 	  .driver_data = SMBBA1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855),
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX900),
 	  .driver_data = SMBBA3 },
 	{ 0, }
 };

 MODULE_DEVICE_TABLE(pci, vt596_ids);

 static struct pci_driver vt596_driver = {
 	.name		= "vt596_smbus",
 	.id_table	= vt596_ids,
 	.probe		= vt596_probe,
 };

 static int __init i2c_vt596_init(void)
 {
 	return pci_register_driver(&vt596_driver);
 }


 static void __exit i2c_vt596_exit(void)
 {
 	pci_unregister_driver(&vt596_driver);
 	if (vt596_pdev != NULL) {
 		i2c_del_adapter(&vt596_adapter);
 		release_region(vt596_smba, 8);
 		pci_dev_put(vt596_pdev);
 		vt596_pdev = NULL;
 	}
 }

 MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
 	      "Mark D. Studebaker <mdsxyz123@yahoo.com> and "
 	      "Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("vt82c596 SMBus driver");
 MODULE_LICENSE("GPL");

 module_init(i2c_vt596_init);
 module_exit(i2c_vt596_exit);
	/*
	Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
	Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
	Mark D. Studebaker <mdsxyz123@yahoo.com>
	Copyright (C) 2005 - 2008 Jean Delvare <khali@linux-fr.org>

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	/*
	Supports the following VIA south bridges:

	Chip name PCI ID REV I2C block
	VT82C596A 0x3050 no
	VT82C596B 0x3051 no
	VT82C686A 0x3057 0x30 no
	VT82C686B 0x3057 0x40 yes
	VT8231 0x8235 no?
	VT8233 0x3074 yes
	VT8233A 0x3147 yes?
	VT8235 0x3177 yes
	VT8237R 0x3227 yes
	VT8237A 0x3337 yes
	VT8237S 0x3372 yes
	VT8251 0x3287 yes
	CX700 0x8324 yes
	VX800/VX820 0x8353 yes
	VX855/VX875 0x8409 yes

	Note: we assume there can only be one device, with one SMBus interface.
	*/

	#include <linux/module.h>
	#include <linux/delay.h>
	#include <linux/pci.h>
	#include <linux/kernel.h>
	#include <linux/stddef.h>
	#include <linux/ioport.h>
	#include <linux/i2c.h>
	#include <linux/init.h>
	#include <linux/acpi.h>
	#include <linux/io.h>

	static struct pci_dev *vt596_pdev;

	#define SMBBA1 0x90
	#define SMBBA2 0x80
	#define SMBBA3 0xD0

	/* SMBus address offsets */
	static unsigned short vt596_smba;
	#define SMBHSTSTS (vt596_smba + 0)
	#define SMBHSTCNT (vt596_smba + 2)
	#define SMBHSTCMD (vt596_smba + 3)
	#define SMBHSTADD (vt596_smba + 4)
	#define SMBHSTDAT0 (vt596_smba + 5)
	#define SMBHSTDAT1 (vt596_smba + 6)
	#define SMBBLKDAT (vt596_smba + 7)

	/* PCI Address Constants */

	/* SMBus data in configuration space can be found in two places,
	We try to select the better one */

	static unsigned short SMBHSTCFG = 0xD2;

	/* Other settings */
	#define MAX_TIMEOUT 500

	/* VT82C596 constants */
	#define VT596_QUICK 0x00
	#define VT596_BYTE 0x04
	#define VT596_BYTE_DATA 0x08
	#define VT596_WORD_DATA 0x0C
	#define VT596_PROC_CALL 0x10
	#define VT596_BLOCK_DATA 0x14
	#define VT596_I2C_BLOCK_DATA 0x34


	/* If force is set to anything different from 0, we forcibly enable the
	VT596. DANGEROUS! */
	static bool force;
	module_param(force, bool, 0);
	MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!");

	/* If force_addr is set to anything different from 0, we forcibly enable
	the VT596 at the given address. VERY DANGEROUS! */
	static u16 force_addr;
	module_param(force_addr, ushort, 0);
	MODULE_PARM_DESC(force_addr,
	"Forcibly enable the SMBus at the given address. "
	"EXTREMELY DANGEROUS!");


	static struct pci_driver vt596_driver;
	static struct i2c_adapter vt596_adapter;

	#define FEATURE_I2CBLOCK (1<<0)
	static unsigned int vt596_features;

	#ifdef DEBUG
	static void vt596_dump_regs(const char *msg, u8 size)
	{
	dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x "
	"DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
	inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
	inb_p(SMBHSTDAT1));

	if (size == VT596_BLOCK_DATA
	\|\| size == VT596_I2C_BLOCK_DATA) {
	int i;

	dev_dbg(&vt596_adapter.dev, "BLK=");
	for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++)
	printk("%02x,", inb_p(SMBBLKDAT));
	printk("\n");
	dev_dbg(&vt596_adapter.dev, " ");
	for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++)
	printk("%02x,", inb_p(SMBBLKDAT));
	printk("%02x\n", inb_p(SMBBLKDAT));
	}
	}
	#else
	static inline void vt596_dump_regs(const char *msg, u8 size) { }
	#endif

	/* Return -1 on error, 0 on success */
	static int vt596_transaction(u8 size)
	{
	int temp;
	int result = 0;
	int timeout = 0;

	vt596_dump_regs("Transaction (pre)", size);

	/* Make sure the SMBus host is ready to start transmitting */
	if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
	dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
	"Resetting...\n", temp);

	outb_p(temp, SMBHSTSTS);
	if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
	dev_err(&vt596_adapter.dev, "SMBus reset failed! "
	"(0x%02x)\n", temp);
	return -EBUSY;
	}
	}

	/* Start the transaction by setting bit 6 */
	outb_p(0x40 \| size, SMBHSTCNT);

	/* We will always wait for a fraction of a second */
	do {
	msleep(1);
	temp = inb_p(SMBHSTSTS);
	} while ((temp & 0x01) && (++timeout < MAX_TIMEOUT));

	/* If the SMBus is still busy, we give up */
	if (timeout == MAX_TIMEOUT) {
	result = -ETIMEDOUT;
	dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
	}

	if (temp & 0x10) {
	result = -EIO;
	dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
	size);
	}

	if (temp & 0x08) {
	result = -EIO;
	dev_err(&vt596_adapter.dev, "SMBus collision!\n");
	}

	if (temp & 0x04) {
	result = -ENXIO;
	dev_dbg(&vt596_adapter.dev, "No response\n");
	}

	/* Resetting status register */
	if (temp & 0x1F)
	outb_p(temp, SMBHSTSTS);

	vt596_dump_regs("Transaction (post)", size);

	return result;
	}

	/* Return negative errno on error, 0 on success */
	static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
	unsigned short flags, char read_write, u8 command,
	int size, union i2c_smbus_data *data)
	{
	int i;
	int status;

	switch (size) {
	case I2C_SMBUS_QUICK:
	size = VT596_QUICK;
	break;
	case I2C_SMBUS_BYTE:
	if (read_write == I2C_SMBUS_WRITE)
	outb_p(command, SMBHSTCMD);
	size = VT596_BYTE;
	break;
	case I2C_SMBUS_BYTE_DATA:
	outb_p(command, SMBHSTCMD);
	if (read_write == I2C_SMBUS_WRITE)
	outb_p(data->byte, SMBHSTDAT0);
	size = VT596_BYTE_DATA;
	break;
	case I2C_SMBUS_WORD_DATA:
	outb_p(command, SMBHSTCMD);
	if (read_write == I2C_SMBUS_WRITE) {
	outb_p(data->word & 0xff, SMBHSTDAT0);
	outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
	}
	size = VT596_WORD_DATA;
	break;
	case I2C_SMBUS_PROC_CALL:
	outb_p(command, SMBHSTCMD);
	outb_p(data->word & 0xff, SMBHSTDAT0);
	outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
	size = VT596_PROC_CALL;
	break;
	case I2C_SMBUS_I2C_BLOCK_DATA:
	if (!(vt596_features & FEATURE_I2CBLOCK))
	goto exit_unsupported;
	if (read_write == I2C_SMBUS_READ)
	outb_p(data->block[0], SMBHSTDAT0);
	/* Fall through */
	case I2C_SMBUS_BLOCK_DATA:
	outb_p(command, SMBHSTCMD);
	if (read_write == I2C_SMBUS_WRITE) {
	u8 len = data->block[0];
	if (len > I2C_SMBUS_BLOCK_MAX)
	len = I2C_SMBUS_BLOCK_MAX;
	outb_p(len, SMBHSTDAT0);
	inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
	for (i = 1; i <= len; i++)
	outb_p(data->block[i], SMBBLKDAT);
	}
	size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
	VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
	break;
	default:
	goto exit_unsupported;
	}

	outb_p(((addr & 0x7f) << 1) \| read_write, SMBHSTADD);

	status = vt596_transaction(size);
	if (status)
	return status;

	if (size == VT596_PROC_CALL)
	read_write = I2C_SMBUS_READ;

	if ((read_write == I2C_SMBUS_WRITE) \|\| (size == VT596_QUICK))
	return 0;

	switch (size) {
	case VT596_BYTE:
	case VT596_BYTE_DATA:
	data->byte = inb_p(SMBHSTDAT0);
	break;
	case VT596_WORD_DATA:
	case VT596_PROC_CALL:
	data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
	break;
	case VT596_I2C_BLOCK_DATA:
	case VT596_BLOCK_DATA:
	data->block[0] = inb_p(SMBHSTDAT0);
	if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
	data->block[0] = I2C_SMBUS_BLOCK_MAX;
	inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
	for (i = 1; i <= data->block[0]; i++)
	data->block[i] = inb_p(SMBBLKDAT);
	break;
	}
	return 0;

	exit_unsupported:
	dev_warn(&vt596_adapter.dev, "Unsupported transaction %d\n",
	size);
	return -EOPNOTSUPP;
	}

	static u32 vt596_func(struct i2c_adapter *adapter)
	{
	u32 func = I2C_FUNC_SMBUS_QUICK \| I2C_FUNC_SMBUS_BYTE \|
	I2C_FUNC_SMBUS_BYTE_DATA \| I2C_FUNC_SMBUS_WORD_DATA \|
	I2C_SMBUS_PROC_CALL \| I2C_FUNC_SMBUS_BLOCK_DATA;

	if (vt596_features & FEATURE_I2CBLOCK)
	func \|= I2C_FUNC_SMBUS_I2C_BLOCK;
	return func;
	}

	static const struct i2c_algorithm smbus_algorithm = {
	.smbus_xfer = vt596_access,
	.functionality = vt596_func,
	};

	static struct i2c_adapter vt596_adapter = {
	.owner = THIS_MODULE,
	.class = I2C_CLASS_HWMON \| I2C_CLASS_SPD,
	.algo = &smbus_algorithm,
	};

	static int __devinit vt596_probe(struct pci_dev *pdev,
	const struct pci_device_id *id)
	{
	unsigned char temp;
	int error;

	/* Determine the address of the SMBus areas */
	if (force_addr) {
	vt596_smba = force_addr & 0xfff0;
	force = 0;
	goto found;
	}

	if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) \|\|
	!(vt596_smba & 0x0001)) {
	/* try 2nd address and config reg. for 596 */
	if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
	!pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
	(vt596_smba & 0x0001)) {
	SMBHSTCFG = 0x84;
	} else {
	/* no matches at all */
	dev_err(&pdev->dev, "Cannot configure "
	"SMBus I/O Base address\n");
	return -ENODEV;
	}
	}

	vt596_smba &= 0xfff0;
	if (vt596_smba == 0) {
	dev_err(&pdev->dev, "SMBus base address "
	"uninitialized - upgrade BIOS or use "
	"force_addr=0xaddr\n");
	return -ENODEV;
	}

	found:
	error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
	if (error)
	return -ENODEV;

	if (!request_region(vt596_smba, 8, vt596_driver.name)) {
	dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
	vt596_smba);
	return -ENODEV;
	}

	pci_read_config_byte(pdev, SMBHSTCFG, &temp);
	/* If force_addr is set, we program the new address here. Just to make
	sure, we disable the VT596 first. */
	if (force_addr) {
	pci_write_config_byte(pdev, SMBHSTCFG, temp & 0xfe);
	pci_write_config_word(pdev, id->driver_data, vt596_smba);
	pci_write_config_byte(pdev, SMBHSTCFG, temp \| 0x01);
	dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
	"address 0x%04x!\n", vt596_smba);
	} else if (!(temp & 0x01)) {
	if (force) {
	/* NOTE: This assumes I/O space and other allocations
	* WERE done by the Bios! Don't complain if your
	* hardware does weird things after enabling this.
	* :') Check for Bios updates before resorting to
	* this.
	*/
	pci_write_config_byte(pdev, SMBHSTCFG, temp \| 0x01);
	dev_info(&pdev->dev, "Enabling SMBus device\n");
	} else {
	dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
	"controller not enabled! - upgrade BIOS or "
	"use force=1\n");
	error = -ENODEV;
	goto release_region;
	}
	}

	dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);

	switch (pdev->device) {
	case PCI_DEVICE_ID_VIA_CX700:
	case PCI_DEVICE_ID_VIA_VX800:
	case PCI_DEVICE_ID_VIA_VX855:
	case PCI_DEVICE_ID_VIA_VX900:
	case PCI_DEVICE_ID_VIA_8251:
	case PCI_DEVICE_ID_VIA_8237:
	case PCI_DEVICE_ID_VIA_8237A:
	case PCI_DEVICE_ID_VIA_8237S:
	case PCI_DEVICE_ID_VIA_8235:
	case PCI_DEVICE_ID_VIA_8233A:
	case PCI_DEVICE_ID_VIA_8233_0:
	vt596_features \|= FEATURE_I2CBLOCK;
	break;
	case PCI_DEVICE_ID_VIA_82C686_4:
	/* The VT82C686B (rev 0x40) does support I2C block
	transactions, but the VT82C686A (rev 0x30) doesn't */
	if (pdev->revision >= 0x40)
	vt596_features \|= FEATURE_I2CBLOCK;
	break;
	}

	vt596_adapter.dev.parent = &pdev->dev;
	snprintf(vt596_adapter.name, sizeof(vt596_adapter.name),
	"SMBus Via Pro adapter at %04x", vt596_smba);

	vt596_pdev = pci_dev_get(pdev);
	error = i2c_add_adapter(&vt596_adapter);
	if (error) {
	pci_dev_put(vt596_pdev);
	vt596_pdev = NULL;
	goto release_region;
	}

	/* Always return failure here. This is to allow other drivers to bind
	* to this pci device. We don't really want to have control over the
	* pci device, we only wanted to read as few register values from it.
	*/
	return -ENODEV;

	release_region:
	release_region(vt596_smba, 8);
	return error;
	}

	static DEFINE_PCI_DEVICE_TABLE(vt596_ids) = {
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3),
	.driver_data = SMBBA1 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3),
	.driver_data = SMBBA1 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4),
	.driver_data = SMBBA1 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237S),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4),
	.driver_data = SMBBA1 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855),
	.driver_data = SMBBA3 },
	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX900),
	.driver_data = SMBBA3 },
	{ 0, }
	};

	MODULE_DEVICE_TABLE(pci, vt596_ids);

	static struct pci_driver vt596_driver = {
	.name = "vt596_smbus",
	.id_table = vt596_ids,
	.probe = vt596_probe,
	};

	static int __init i2c_vt596_init(void)
	{
	return pci_register_driver(&vt596_driver);
	}


	static void __exit i2c_vt596_exit(void)
	{
	pci_unregister_driver(&vt596_driver);
	if (vt596_pdev != NULL) {
	i2c_del_adapter(&vt596_adapter);
	release_region(vt596_smba, 8);
	pci_dev_put(vt596_pdev);
	vt596_pdev = NULL;
	}
	}

	MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
	"Mark D. Studebaker <mdsxyz123@yahoo.com> and "
	"Jean Delvare <khali@linux-fr.org>");
	MODULE_DESCRIPTION("vt82c596 SMBus driver");
	MODULE_LICENSE("GPL");

	module_init(i2c_vt596_init);
	module_exit(i2c_vt596_exit);