x86, serial: convert legacy COM ports to platform devices
Make x86 COM ports into platform devices and don't probe for them
if we have PNP.
This prevents double discovery, where a device was found both by
the legacy probe and by 8250_pnp, e.g.,
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
This also means IRDA devices without a UART PNP ID will no longer be
claimed by the serial driver, which might require changes in IRDA
drivers and administration.
In addition to this patch, you may need to configure a setserial init
script, e.g., /etc/init.d/setserial, so it doesn't poke legacy UART
stuff back in. On Debian, "dpkg-reconfigure setserial" with the "kernel"
option does this.
To force the old legacy probe behavior even when we have PNPBIOS or
ACPI, load the new legacy_serial module (or build 8250 static) with
the "legacy_serial.force" option.
[akpm@linux-foundation.org: fix makefiles]
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Keith Owens <kaos@ocs.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Ville Syrjala <syrjala@sci.fi>
Cc: Russell King <rmk+serial@arm.linux.org.uk>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index fa88517..bebebe4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -816,6 +816,11 @@
lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip
Format: addr:<io>,irq:<irq>
+ legacy_serial.force [HW,IA-32,X86-64]
+ Probe for COM ports at legacy addresses even
+ if PNPBIOS or ACPI should describe them. This
+ is for working around firmware defects.
+
llsc*= [IA64] See function print_params() in
arch/ia64/sn/kernel/llsc4.c.
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 4f98516..91cff8d 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -34,6 +34,7 @@
obj-$(CONFIG_ACPI_SRAT) += srat.o
obj-$(CONFIG_EFI) += efi.o efi_stub.o
obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
+obj-$(CONFIG_SERIAL_8250) += legacy_serial.o
obj-$(CONFIG_VM86) += vm86.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
diff --git a/arch/i386/kernel/legacy_serial.c b/arch/i386/kernel/legacy_serial.c
new file mode 100644
index 0000000..2151011
--- /dev/null
+++ b/arch/i386/kernel/legacy_serial.c
@@ -0,0 +1,67 @@
+/*
+ * Legacy COM port devices for x86 platforms without PNPBIOS or ACPI.
+ * Data taken from include/asm-i386/serial.h.
+ *
+ * (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pnp.h>
+#include <linux/serial_8250.h>
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
+#else
+#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define COM4_FLAGS UPF_BOOT_AUTOCONF
+#endif
+
+#define PORT(_base,_irq,_flags) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = _flags, \
+ }
+
+static struct plat_serial8250_port x86_com_data[] = {
+ PORT(0x3F8, 4, COM_FLAGS),
+ PORT(0x2F8, 3, COM_FLAGS),
+ PORT(0x3E8, 4, COM_FLAGS),
+ PORT(0x2E8, 3, COM4_FLAGS),
+ { },
+};
+
+static struct platform_device x86_com_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = x86_com_data,
+ },
+};
+
+static int force_legacy_probe;
+module_param_named(force, force_legacy_probe, bool, 0);
+MODULE_PARM_DESC(force, "Force legacy serial port probe");
+
+static int __init serial8250_x86_com_init(void)
+{
+ if (pnp_platform_devices && !force_legacy_probe)
+ return -ENODEV;
+
+ return platform_device_register(&x86_com_device);
+}
+
+module_init(serial8250_x86_com_init);
+
+MODULE_AUTHOR("Bjorn Helgaas");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 legacy probe module");
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index 4d94c51..de1de8a 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -32,6 +32,7 @@
obj-$(CONFIG_IOMMU) += pci-gart.o aperture.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary.o tce.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
+obj-$(CONFIG_SERIAL_8250) += legacy_serial.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o
obj-$(CONFIG_X86_VSMP) += vsmp.o
@@ -49,6 +50,7 @@
therm_throt-y += ../../i386/kernel/cpu/mcheck/therm_throt.o
bootflag-y += ../../i386/kernel/bootflag.o
+legacy_serial-y += ../../i386/kernel/legacy_serial.o
cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o
topology-y += ../../i386/kernel/topology.o
microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 924e9bd..e8efe93 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -73,17 +73,21 @@
depends on SERIAL_8250 && PCI
default SERIAL_8250
help
- This builds standard PCI serial support. You may be able to
- disable this feature if you only need legacy serial support.
- Saves about 9K.
+ Say Y here if you have PCI serial ports.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_pci.
config SERIAL_8250_PNP
tristate "8250/16550 PNP device support" if EMBEDDED
depends on SERIAL_8250 && PNP
default SERIAL_8250
help
- This builds standard PNP serial support. You may be able to
- disable this feature if you only need legacy serial support.
+ Say Y here if you have serial ports described by PNPBIOS or ACPI.
+ These are typically ports built into the system board.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_pnp.
config SERIAL_8250_HP300
tristate
diff --git a/include/asm-i386/serial.h b/include/asm-i386/serial.h
index bd67480..57a4306 100644
--- a/include/asm-i386/serial.h
+++ b/include/asm-i386/serial.h
@@ -11,19 +11,3 @@
* megabits/second; but this requires the faster clock.
*/
#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
- { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
- { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
diff --git a/include/asm-x86_64/serial.h b/include/asm-x86_64/serial.h
index b0496e0..8ebd765 100644
--- a/include/asm-x86_64/serial.h
+++ b/include/asm-x86_64/serial.h
@@ -11,19 +11,3 @@
* megabits/second; but this requires the faster clock.
*/
#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
- { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
- { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */