Input: wacom - add support for the new Bamboo tablets
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 7661f03..fc03ba2 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -178,7 +178,8 @@
case 2: /* Mouse with wheel */
wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
- if (wacom->features->type == WACOM_G4) {
+ if (wacom->features->type == WACOM_G4 ||
+ wacom->features->type == WACOM_MO) {
rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
wacom_report_rel(wcombo, REL_WHEEL, -rw);
} else
@@ -190,7 +191,8 @@
id = CURSOR_DEVICE_ID;
wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
- if (wacom->features->type == WACOM_G4)
+ if (wacom->features->type == WACOM_G4 ||
+ wacom->features->type == WACOM_MO)
wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
else
wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
@@ -226,7 +228,8 @@
}
/* send pad data */
- if (wacom->features->type == WACOM_G4) {
+ switch (wacom->features->type) {
+ case WACOM_G4:
if (data[7] & 0xf8) {
wacom_input_sync(wcombo); /* sync last event */
wacom->id[1] = 1;
@@ -247,6 +250,33 @@
wacom_report_abs(wcombo, ABS_MISC, 0);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
}
+ break;
+ case WACOM_MO:
+ if ((data[7] & 0xf8) || (data[8] & 0x80)) {
+ wacom_input_sync(wcombo); /* sync last event */
+ wacom->id[1] = 1;
+ wacom->serial[1] = (data[7] & 0xf8);
+ wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
+ wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
+ wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
+ wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
+ wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
+ wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
+ wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+ } else if (wacom->id[1]) {
+ wacom_input_sync(wcombo); /* sync last event */
+ wacom->id[1] = 0;
+ wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
+ wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
+ wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
+ wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
+ wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
+ wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
+ wacom_report_abs(wcombo, ABS_MISC, 0);
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+ }
+ break;
}
return 1;
}
@@ -331,7 +361,7 @@
wacom_report_key(wcombo, BTN_EXTRA, 0);
wacom_report_abs(wcombo, ABS_THROTTLE, 0);
wacom_report_abs(wcombo, ABS_RZ, 0);
- } else {
+ } else {
wacom_report_abs(wcombo, ABS_PRESSURE, 0);
wacom_report_abs(wcombo, ABS_TILT_X, 0);
wacom_report_abs(wcombo, ABS_TILT_Y, 0);
@@ -423,9 +453,9 @@
return result-1;
/* Only large I3 and I1 & I2 support Lense Cursor */
- if((wacom->tool[idx] == BTN_TOOL_LENS)
+ if ((wacom->tool[idx] == BTN_TOOL_LENS)
&& ((wacom->features->type == INTUOS3)
- || (wacom->features->type == INTUOS3S)))
+ || (wacom->features->type == INTUOS3S)))
return 0;
/* Cintiq doesn't send data when RDY bit isn't set */
@@ -517,6 +547,7 @@
break;
case WACOM_G4:
case GRAPHIRE:
+ case WACOM_MO:
return (wacom_graphire_irq(wacom_wac, wcombo));
break;
case PTU:
@@ -538,6 +569,8 @@
void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
switch (wacom_wac->features->type) {
+ case WACOM_MO:
+ input_dev_mo(input_dev, wacom_wac);
case WACOM_G4:
input_dev_g4(input_dev, wacom_wac);
/* fall through */
@@ -579,6 +612,7 @@
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE },
{ "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE },
+ { "Wacom Bamboo", 9, 14760, 9225, 511, 63, WACOM_MO },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 31, INTUOS },
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 31, INTUOS },
@@ -627,6 +661,7 @@
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x65) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },