| /* This version ported to the Linux-MTD system by dwmw2@infradead.org |
| * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $ |
| * |
| * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br> |
| * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups |
| * |
| * Based on: |
| */ |
| /*====================================================================== |
| |
| A Flash Translation Layer memory card driver |
| |
| This driver implements a disk-like block device driver with an |
| apparent block size of 512 bytes for flash memory cards. |
| |
| ftl_cs.c 1.62 2000/02/01 00:59:04 |
| |
| The contents of this file are subject to the Mozilla Public |
| License Version 1.1 (the "License"); you may not use this file |
| except in compliance with the License. You may obtain a copy of |
| the License at http://www.mozilla.org/MPL/ |
| |
| Software distributed under the License is distributed on an "AS |
| IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| implied. See the License for the specific language governing |
| rights and limitations under the License. |
| |
| The initial developer of the original code is David A. Hinds |
| <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| |
| Alternatively, the contents of this file may be used under the |
| terms of the GNU General Public License version 2 (the "GPL"), in |
| which case the provisions of the GPL are applicable instead of the |
| above. If you wish to allow the use of your version of this file |
| only under the terms of the GPL and not to allow others to use |
| your version of this file under the MPL, indicate your decision |
| by deleting the provisions above and replace them with the notice |
| and other provisions required by the GPL. If you do not delete |
| the provisions above, a recipient may use your version of this |
| file under either the MPL or the GPL. |
| |
| LEGAL NOTE: The FTL format is patented by M-Systems. They have |
| granted a license for its use with PCMCIA devices: |
| |
| "M-Systems grants a royalty-free, non-exclusive license under |
| any presently existing M-Systems intellectual property rights |
| necessary for the design and development of FTL-compatible |
| drivers, file systems and utilities using the data formats with |
| PCMCIA PC Cards as described in the PCMCIA Flash Translation |
| Layer (FTL) Specification." |
| |
| Use of the FTL format for non-PCMCIA applications may be an |
| infringement of these patents. For additional information, |
| contact M-Systems (http://www.m-sys.com) directly. |
| |
| ======================================================================*/ |
| #include <linux/mtd/blktrans.h> |
| #include <linux/module.h> |
| #include <linux/mtd/mtd.h> |
| /*#define PSYCHO_DEBUG */ |
| |
| #include <linux/kernel.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/major.h> |
| #include <linux/fs.h> |
| #include <linux/init.h> |
| #include <linux/hdreg.h> |
| #include <linux/vmalloc.h> |
| #include <linux/blkpg.h> |
| #include <asm/uaccess.h> |
| |
| #include <linux/mtd/ftl.h> |
| |
| /*====================================================================*/ |
| |
| /* Parameters that can be set with 'insmod' */ |
| static int shuffle_freq = 50; |
| module_param(shuffle_freq, int, 0); |
| |
| /*====================================================================*/ |
| |
| /* Major device # for FTL device */ |
| #ifndef FTL_MAJOR |
| #define FTL_MAJOR 44 |
| #endif |
| |
| |
| /*====================================================================*/ |
| |
| /* Maximum number of separate memory devices we'll allow */ |
| #define MAX_DEV 4 |
| |
| /* Maximum number of regions per device */ |
| #define MAX_REGION 4 |
| |
| /* Maximum number of partitions in an FTL region */ |
| #define PART_BITS 4 |
| |
| /* Maximum number of outstanding erase requests per socket */ |
| #define MAX_ERASE 8 |
| |
| /* Sector size -- shouldn't need to change */ |
| #define SECTOR_SIZE 512 |
| |
| |
| /* Each memory region corresponds to a minor device */ |
| typedef struct partition_t { |
| struct mtd_blktrans_dev mbd; |
| u_int32_t state; |
| u_int32_t *VirtualBlockMap; |
| u_int32_t *VirtualPageMap; |
| u_int32_t FreeTotal; |
| struct eun_info_t { |
| u_int32_t Offset; |
| u_int32_t EraseCount; |
| u_int32_t Free; |
| u_int32_t Deleted; |
| } *EUNInfo; |
| struct xfer_info_t { |
| u_int32_t Offset; |
| u_int32_t EraseCount; |
| u_int16_t state; |
| } *XferInfo; |
| u_int16_t bam_index; |
| u_int32_t *bam_cache; |
| u_int16_t DataUnits; |
| u_int32_t BlocksPerUnit; |
| erase_unit_header_t header; |
| } partition_t; |
| |
| /* Partition state flags */ |
| #define FTL_FORMATTED 0x01 |
| |
| /* Transfer unit states */ |
| #define XFER_UNKNOWN 0x00 |
| #define XFER_ERASING 0x01 |
| #define XFER_ERASED 0x02 |
| #define XFER_PREPARED 0x03 |
| #define XFER_FAILED 0x04 |
| |
| /*====================================================================*/ |
| |
| |
| static void ftl_erase_callback(struct erase_info *done); |
| |
| |
| /*====================================================================== |
| |
| Scan_header() checks to see if a memory region contains an FTL |
| partition. build_maps() reads all the erase unit headers, builds |
| the erase unit map, and then builds the virtual page map. |
| |
| ======================================================================*/ |
| |
| static int scan_header(partition_t *part) |
| { |
| erase_unit_header_t header; |
| loff_t offset, max_offset; |
| size_t ret; |
| int err; |
| part->header.FormattedSize = 0; |
| max_offset = (0x100000<part->mbd.mtd->size)?0x100000:part->mbd.mtd->size; |
| /* Search first megabyte for a valid FTL header */ |
| for (offset = 0; |
| (offset + sizeof(header)) < max_offset; |
| offset += part->mbd.mtd->erasesize ? : 0x2000) { |
| |
| err = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &ret, |
| (unsigned char *)&header); |
| |
| if (err) |
| return err; |
| |
| if (strcmp(header.DataOrgTuple+3, "FTL100") == 0) break; |
| } |
| |
| if (offset == max_offset) { |
| printk(KERN_NOTICE "ftl_cs: FTL header not found.\n"); |
| return -ENOENT; |
| } |
| if (header.BlockSize != 9 || |
| (header.EraseUnitSize < 10) || (header.EraseUnitSize > 31) || |
| (header.NumTransferUnits >= le16_to_cpu(header.NumEraseUnits))) { |
| printk(KERN_NOTICE "ftl_cs: FTL header corrupt!\n"); |
| return -1; |
| } |
| if ((1 << header.EraseUnitSize) != part->mbd.mtd->erasesize) { |
| printk(KERN_NOTICE "ftl: FTL EraseUnitSize %x != MTD erasesize %x\n", |
| 1 << header.EraseUnitSize,part->mbd.mtd->erasesize); |
| return -1; |
| } |
| part->header = header; |
| return 0; |
| } |
| |
| static int build_maps(partition_t *part) |
| { |
| erase_unit_header_t header; |
| u_int16_t xvalid, xtrans, i; |
| u_int blocks, j; |
| int hdr_ok, ret = -1; |
| ssize_t retval; |
| loff_t offset; |
| |
| /* Set up erase unit maps */ |
| part->DataUnits = le16_to_cpu(part->header.NumEraseUnits) - |
| part->header.NumTransferUnits; |
| part->EUNInfo = kmalloc(part->DataUnits * sizeof(struct eun_info_t), |
| GFP_KERNEL); |
| if (!part->EUNInfo) |
| goto out; |
| for (i = 0; i < part->DataUnits; i++) |
| part->EUNInfo[i].Offset = 0xffffffff; |
| part->XferInfo = |
| kmalloc(part->header.NumTransferUnits * sizeof(struct xfer_info_t), |
| GFP_KERNEL); |
| if (!part->XferInfo) |
| goto out_EUNInfo; |
| |
| xvalid = xtrans = 0; |
| for (i = 0; i < le16_to_cpu(part->header.NumEraseUnits); i++) { |
| offset = ((i + le16_to_cpu(part->header.FirstPhysicalEUN)) |
| << part->header.EraseUnitSize); |
| ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &retval, |
| (unsigned char *)&header); |
| |
| if (ret) |
| goto out_XferInfo; |
| |
| ret = -1; |
| /* Is this a transfer partition? */ |
| hdr_ok = (strcmp(header.DataOrgTuple+3, "FTL100") == 0); |
| if (hdr_ok && (le16_to_cpu(header.LogicalEUN) < part->DataUnits) && |
| (part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset == 0xffffffff)) { |
| part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset = offset; |
| part->EUNInfo[le16_to_cpu(header.LogicalEUN)].EraseCount = |
| le32_to_cpu(header.EraseCount); |
| xvalid++; |
| } else { |
| if (xtrans == part->header.NumTransferUnits) { |
| printk(KERN_NOTICE "ftl_cs: format error: too many " |
| "transfer units!\n"); |
| goto out_XferInfo; |
| } |
| if (hdr_ok && (le16_to_cpu(header.LogicalEUN) == 0xffff)) { |
| part->XferInfo[xtrans].state = XFER_PREPARED; |
| part->XferInfo[xtrans].EraseCount = le32_to_cpu(header.EraseCount); |
| } else { |
| part->XferInfo[xtrans].state = XFER_UNKNOWN; |
| /* Pick anything reasonable for the erase count */ |
| part->XferInfo[xtrans].EraseCount = |
| le32_to_cpu(part->header.EraseCount); |
| } |
| part->XferInfo[xtrans].Offset = offset; |
| xtrans++; |
| } |
| } |
| /* Check for format trouble */ |
| header = part->header; |
| if ((xtrans != header.NumTransferUnits) || |
| (xvalid+xtrans != le16_to_cpu(header.NumEraseUnits))) { |
| printk(KERN_NOTICE "ftl_cs: format error: erase units " |
| "don't add up!\n"); |
| goto out_XferInfo; |
| } |
| |
| /* Set up virtual page map */ |
| blocks = le32_to_cpu(header.FormattedSize) >> header.BlockSize; |
| part->VirtualBlockMap = vmalloc(blocks * sizeof(u_int32_t)); |
| if (!part->VirtualBlockMap) |
| goto out_XferInfo; |
| |
| memset(part->VirtualBlockMap, 0xff, blocks * sizeof(u_int32_t)); |
| part->BlocksPerUnit = (1 << header.EraseUnitSize) >> header.BlockSize; |
| |
| part->bam_cache = kmalloc(part->BlocksPerUnit * sizeof(u_int32_t), |
| GFP_KERNEL); |
| if (!part->bam_cache) |
| goto out_VirtualBlockMap; |
| |
| part->bam_index = 0xffff; |
| part->FreeTotal = 0; |
| |
| for (i = 0; i < part->DataUnits; i++) { |
| part->EUNInfo[i].Free = 0; |
| part->EUNInfo[i].Deleted = 0; |
| offset = part->EUNInfo[i].Offset + le32_to_cpu(header.BAMOffset); |
| |
| ret = part->mbd.mtd->read(part->mbd.mtd, offset, |
| part->BlocksPerUnit * sizeof(u_int32_t), &retval, |
| (unsigned char *)part->bam_cache); |
| |
| if (ret) |
| goto out_bam_cache; |
| |
| for (j = 0; j < part->BlocksPerUnit; j++) { |
| if (BLOCK_FREE(le32_to_cpu(part->bam_cache[j]))) { |
| part->EUNInfo[i].Free++; |
| part->FreeTotal++; |
| } else if ((BLOCK_TYPE(le32_to_cpu(part->bam_cache[j])) == BLOCK_DATA) && |
| (BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j])) < blocks)) |
| part->VirtualBlockMap[BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j]))] = |
| (i << header.EraseUnitSize) + (j << header.BlockSize); |
| else if (BLOCK_DELETED(le32_to_cpu(part->bam_cache[j]))) |
| part->EUNInfo[i].Deleted++; |
| } |
| } |
| |
| ret = 0; |
| goto out; |
| |
| out_bam_cache: |
| kfree(part->bam_cache); |
| out_VirtualBlockMap: |
| vfree(part->VirtualBlockMap); |
| out_XferInfo: |
| kfree(part->XferInfo); |
| out_EUNInfo: |
| kfree(part->EUNInfo); |
| out: |
| return ret; |
| } /* build_maps */ |
| |
| /*====================================================================== |
| |
| Erase_xfer() schedules an asynchronous erase operation for a |
| transfer unit. |
| |
| ======================================================================*/ |
| |
| static int erase_xfer(partition_t *part, |
| u_int16_t xfernum) |
| { |
| int ret; |
| struct xfer_info_t *xfer; |
| struct erase_info *erase; |
| |
| xfer = &part->XferInfo[xfernum]; |
| DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset); |
| xfer->state = XFER_ERASING; |
| |
| /* Is there a free erase slot? Always in MTD. */ |
| |
| |
| erase=kmalloc(sizeof(struct erase_info), GFP_KERNEL); |
| if (!erase) |
| return -ENOMEM; |
| |
| erase->mtd = part->mbd.mtd; |
| erase->callback = ftl_erase_callback; |
| erase->addr = xfer->Offset; |
| erase->len = 1 << part->header.EraseUnitSize; |
| erase->priv = (u_long)part; |
| |
| ret = part->mbd.mtd->erase(part->mbd.mtd, erase); |
| |
| if (!ret) |
| xfer->EraseCount++; |
| else |
| kfree(erase); |
| |
| return ret; |
| } /* erase_xfer */ |
| |
| /*====================================================================== |
| |
| Prepare_xfer() takes a freshly erased transfer unit and gives |
| it an appropriate header. |
| |
| ======================================================================*/ |
| |
| static void ftl_erase_callback(struct erase_info *erase) |
| { |
| partition_t *part; |
| struct xfer_info_t *xfer; |
| int i; |
| |
| /* Look up the transfer unit */ |
| part = (partition_t *)(erase->priv); |
| |
| for (i = 0; i < part->header.NumTransferUnits; i++) |
| if (part->XferInfo[i].Offset == erase->addr) break; |
| |
| if (i == part->header.NumTransferUnits) { |
| printk(KERN_NOTICE "ftl_cs: internal error: " |
| "erase lookup failed!\n"); |
| return; |
| } |
| |
| xfer = &part->XferInfo[i]; |
| if (erase->state == MTD_ERASE_DONE) |
| xfer->state = XFER_ERASED; |
| else { |
| xfer->state = XFER_FAILED; |
| printk(KERN_NOTICE "ftl_cs: erase failed: state = %d\n", |
| erase->state); |
| } |
| |
| kfree(erase); |
| |
| } /* ftl_erase_callback */ |
| |
| static int prepare_xfer(partition_t *part, int i) |
| { |
| erase_unit_header_t header; |
| struct xfer_info_t *xfer; |
| int nbam, ret; |
| u_int32_t ctl; |
| ssize_t retlen; |
| loff_t offset; |
| |
| xfer = &part->XferInfo[i]; |
| xfer->state = XFER_FAILED; |
| |
| DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset); |
| |
| /* Write the transfer unit header */ |
| header = part->header; |
| header.LogicalEUN = cpu_to_le16(0xffff); |
| header.EraseCount = cpu_to_le32(xfer->EraseCount); |
| |
| ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset, sizeof(header), |
| &retlen, (u_char *)&header); |
| |
| if (ret) { |
| return ret; |
| } |
| |
| /* Write the BAM stub */ |
| nbam = (part->BlocksPerUnit * sizeof(u_int32_t) + |
| le32_to_cpu(part->header.BAMOffset) + SECTOR_SIZE - 1) / SECTOR_SIZE; |
| |
| offset = xfer->Offset + le32_to_cpu(part->header.BAMOffset); |
| ctl = cpu_to_le32(BLOCK_CONTROL); |
| |
| for (i = 0; i < nbam; i++, offset += sizeof(u_int32_t)) { |
| |
| ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t), |
| &retlen, (u_char *)&ctl); |
| |
| if (ret) |
| return ret; |
| } |
| xfer->state = XFER_PREPARED; |
| return 0; |
| |
| } /* prepare_xfer */ |
| |
| /*====================================================================== |
| |
| Copy_erase_unit() takes a full erase block and a transfer unit, |
| copies everything to the transfer unit, then swaps the block |
| pointers. |
| |
| All data blocks are copied to the corresponding blocks in the |
| target unit, so the virtual block map does not need to be |
| updated. |
| |
| ======================================================================*/ |
| |
| static int copy_erase_unit(partition_t *part, u_int16_t srcunit, |
| u_int16_t xferunit) |
| { |
| u_char buf[SECTOR_SIZE]; |
| struct eun_info_t *eun; |
| struct xfer_info_t *xfer; |
| u_int32_t src, dest, free, i; |
| u_int16_t unit; |
| int ret; |
| ssize_t retlen; |
| loff_t offset; |
| u_int16_t srcunitswap = cpu_to_le16(srcunit); |
| |
| eun = &part->EUNInfo[srcunit]; |
| xfer = &part->XferInfo[xferunit]; |
| DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n", |
| eun->Offset, xfer->Offset); |
| |
| |
| /* Read current BAM */ |
| if (part->bam_index != srcunit) { |
| |
| offset = eun->Offset + le32_to_cpu(part->header.BAMOffset); |
| |
| ret = part->mbd.mtd->read(part->mbd.mtd, offset, |
| part->BlocksPerUnit * sizeof(u_int32_t), |
| &retlen, (u_char *) (part->bam_cache)); |
| |
| /* mark the cache bad, in case we get an error later */ |
| part->bam_index = 0xffff; |
| |
| if (ret) { |
| printk( KERN_WARNING "ftl: Failed to read BAM cache in copy_erase_unit()!\n"); |
| return ret; |
| } |
| } |
| |
| /* Write the LogicalEUN for the transfer unit */ |
| xfer->state = XFER_UNKNOWN; |
| offset = xfer->Offset + 20; /* Bad! */ |
| unit = cpu_to_le16(0x7fff); |
| |
| ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int16_t), |
| &retlen, (u_char *) &unit); |
| |
| if (ret) { |
| printk( KERN_WARNING "ftl: Failed to write back to BAM cache in copy_erase_unit()!\n"); |
| return ret; |
| } |
| |
| /* Copy all data blocks from source unit to transfer unit */ |
| src = eun->Offset; dest = xfer->Offset; |
| |
| free = 0; |
| ret = 0; |
| for (i = 0; i < part->BlocksPerUnit; i++) { |
| switch (BLOCK_TYPE(le32_to_cpu(part->bam_cache[i]))) { |
| case BLOCK_CONTROL: |
| /* This gets updated later */ |
| break; |
| case BLOCK_DATA: |
| case BLOCK_REPLACEMENT: |
| ret = part->mbd.mtd->read(part->mbd.mtd, src, SECTOR_SIZE, |
| &retlen, (u_char *) buf); |
| if (ret) { |
| printk(KERN_WARNING "ftl: Error reading old xfer unit in copy_erase_unit\n"); |
| return ret; |
| } |
| |
| |
| ret = part->mbd.mtd->write(part->mbd.mtd, dest, SECTOR_SIZE, |
| &retlen, (u_char *) buf); |
| if (ret) { |
| printk(KERN_WARNING "ftl: Error writing new xfer unit in copy_erase_unit\n"); |
| return ret; |
| } |
| |
| break; |
| default: |
| /* All other blocks must be free */ |
| part->bam_cache[i] = cpu_to_le32(0xffffffff); |
| free++; |
| break; |
| } |
| src += SECTOR_SIZE; |
| dest += SECTOR_SIZE; |
| } |
| |
| /* Write the BAM to the transfer unit */ |
| ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + le32_to_cpu(part->header.BAMOffset), |
| part->BlocksPerUnit * sizeof(int32_t), &retlen, |
| (u_char *)part->bam_cache); |
| if (ret) { |
| printk( KERN_WARNING "ftl: Error writing BAM in copy_erase_unit\n"); |
| return ret; |
| } |
| |
| |
| /* All clear? Then update the LogicalEUN again */ |
| ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + 20, sizeof(u_int16_t), |
| &retlen, (u_char *)&srcunitswap); |
| |
| if (ret) { |
| printk(KERN_WARNING "ftl: Error writing new LogicalEUN in copy_erase_unit\n"); |
| return ret; |
| } |
| |
| |
| /* Update the maps and usage stats*/ |
| i = xfer->EraseCount; |
| xfer->EraseCount = eun->EraseCount; |
| eun->EraseCount = i; |
| i = xfer->Offset; |
| xfer->Offset = eun->Offset; |
| eun->Offset = i; |
| part->FreeTotal -= eun->Free; |
| part->FreeTotal += free; |
| eun->Free = free; |
| eun->Deleted = 0; |
| |
| /* Now, the cache should be valid for the new block */ |
| part->bam_index = srcunit; |
| |
| return 0; |
| } /* copy_erase_unit */ |
| |
| /*====================================================================== |
| |
| reclaim_block() picks a full erase unit and a transfer unit and |
| then calls copy_erase_unit() to copy one to the other. Then, it |
| schedules an erase on the expired block. |
| |
| What's a good way to decide which transfer unit and which erase |
| unit to use? Beats me. My way is to always pick the transfer |
| unit with the fewest erases, and usually pick the data unit with |
| the most deleted blocks. But with a small probability, pick the |
| oldest data unit instead. This means that we generally postpone |
| the next reclaimation as long as possible, but shuffle static |
| stuff around a bit for wear leveling. |
| |
| ======================================================================*/ |
| |
| static int reclaim_block(partition_t *part) |
| { |
| u_int16_t i, eun, xfer; |
| u_int32_t best; |
| int queued, ret; |
| |
| DEBUG(0, "ftl_cs: reclaiming space...\n"); |
| DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits); |
| /* Pick the least erased transfer unit */ |
| best = 0xffffffff; xfer = 0xffff; |
| do { |
| queued = 0; |
| for (i = 0; i < part->header.NumTransferUnits; i++) { |
| int n=0; |
| if (part->XferInfo[i].state == XFER_UNKNOWN) { |
| DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i); |
| n=1; |
| erase_xfer(part, i); |
| } |
| if (part->XferInfo[i].state == XFER_ERASING) { |
| DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i); |
| n=1; |
| queued = 1; |
| } |
| else if (part->XferInfo[i].state == XFER_ERASED) { |
| DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i); |
| n=1; |
| prepare_xfer(part, i); |
| } |
| if (part->XferInfo[i].state == XFER_PREPARED) { |
| DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i); |
| n=1; |
| if (part->XferInfo[i].EraseCount <= best) { |
| best = part->XferInfo[i].EraseCount; |
| xfer = i; |
| } |
| } |
| if (!n) |
| DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state); |
| |
| } |
| if (xfer == 0xffff) { |
| if (queued) { |
| DEBUG(1, "ftl_cs: waiting for transfer " |
| "unit to be prepared...\n"); |
| if (part->mbd.mtd->sync) |
| part->mbd.mtd->sync(part->mbd.mtd); |
| } else { |
| static int ne = 0; |
| if (++ne < 5) |
| printk(KERN_NOTICE "ftl_cs: reclaim failed: no " |
| "suitable transfer units!\n"); |
| else |
| DEBUG(1, "ftl_cs: reclaim failed: no " |
| "suitable transfer units!\n"); |
| |
| return -EIO; |
| } |
| } |
| } while (xfer == 0xffff); |
| |
| eun = 0; |
| if ((jiffies % shuffle_freq) == 0) { |
| DEBUG(1, "ftl_cs: recycling freshest block...\n"); |
| best = 0xffffffff; |
| for (i = 0; i < part->DataUnits; i++) |
| if (part->EUNInfo[i].EraseCount <= best) { |
| best = part->EUNInfo[i].EraseCount; |
| eun = i; |
| } |
| } else { |
| best = 0; |
| for (i = 0; i < part->DataUnits; i++) |
| if (part->EUNInfo[i].Deleted >= best) { |
| best = part->EUNInfo[i].Deleted; |
| eun = i; |
| } |
| if (best == 0) { |
| static int ne = 0; |
| if (++ne < 5) |
| printk(KERN_NOTICE "ftl_cs: reclaim failed: " |
| "no free blocks!\n"); |
| else |
| DEBUG(1,"ftl_cs: reclaim failed: " |
| "no free blocks!\n"); |
| |
| return -EIO; |
| } |
| } |
| ret = copy_erase_unit(part, eun, xfer); |
| if (!ret) |
| erase_xfer(part, xfer); |
| else |
| printk(KERN_NOTICE "ftl_cs: copy_erase_unit failed!\n"); |
| return ret; |
| } /* reclaim_block */ |
| |
| /*====================================================================== |
| |
| Find_free() searches for a free block. If necessary, it updates |
| the BAM cache for the erase unit containing the free block. It |
| returns the block index -- the erase unit is just the currently |
| cached unit. If there are no free blocks, it returns 0 -- this |
| is never a valid data block because it contains the header. |
| |
| ======================================================================*/ |
| |
| #ifdef PSYCHO_DEBUG |
| static void dump_lists(partition_t *part) |
| { |
| int i; |
| printk(KERN_DEBUG "ftl_cs: Free total = %d\n", part->FreeTotal); |
| for (i = 0; i < part->DataUnits; i++) |
| printk(KERN_DEBUG "ftl_cs: unit %d: %d phys, %d free, " |
| "%d deleted\n", i, |
| part->EUNInfo[i].Offset >> part->header.EraseUnitSize, |
| part->EUNInfo[i].Free, part->EUNInfo[i].Deleted); |
| } |
| #endif |
| |
| static u_int32_t find_free(partition_t *part) |
| { |
| u_int16_t stop, eun; |
| u_int32_t blk; |
| size_t retlen; |
| int ret; |
| |
| /* Find an erase unit with some free space */ |
| stop = (part->bam_index == 0xffff) ? 0 : part->bam_index; |
| eun = stop; |
| do { |
| if (part->EUNInfo[eun].Free != 0) break; |
| /* Wrap around at end of table */ |
| if (++eun == part->DataUnits) eun = 0; |
| } while (eun != stop); |
| |
| if (part->EUNInfo[eun].Free == 0) |
| return 0; |
| |
| /* Is this unit's BAM cached? */ |
| if (eun != part->bam_index) { |
| /* Invalidate cache */ |
| part->bam_index = 0xffff; |
| |
| ret = part->mbd.mtd->read(part->mbd.mtd, |
| part->EUNInfo[eun].Offset + le32_to_cpu(part->header.BAMOffset), |
| part->BlocksPerUnit * sizeof(u_int32_t), |
| &retlen, (u_char *) (part->bam_cache)); |
| |
| if (ret) { |
| printk(KERN_WARNING"ftl: Error reading BAM in find_free\n"); |
| return 0; |
| } |
| part->bam_index = eun; |
| } |
| |
| /* Find a free block */ |
| for (blk = 0; blk < part->BlocksPerUnit; blk++) |
| if (BLOCK_FREE(le32_to_cpu(part->bam_cache[blk]))) break; |
| if (blk == part->BlocksPerUnit) { |
| #ifdef PSYCHO_DEBUG |
| static int ne = 0; |
| if (++ne == 1) |
| dump_lists(part); |
| #endif |
| printk(KERN_NOTICE "ftl_cs: bad free list!\n"); |
| return 0; |
| } |
| DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun); |
| return blk; |
| |
| } /* find_free */ |
| |
| |
| /*====================================================================== |
| |
| Read a series of sectors from an FTL partition. |
| |
| ======================================================================*/ |
| |
| static int ftl_read(partition_t *part, caddr_t buffer, |
| u_long sector, u_long nblocks) |
| { |
| u_int32_t log_addr, bsize; |
| u_long i; |
| int ret; |
| size_t offset, retlen; |
| |
| DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n", |
| part, sector, nblocks); |
| if (!(part->state & FTL_FORMATTED)) { |
| printk(KERN_NOTICE "ftl_cs: bad partition\n"); |
| return -EIO; |
| } |
| bsize = 1 << part->header.EraseUnitSize; |
| |
| for (i = 0; i < nblocks; i++) { |
| if (((sector+i) * SECTOR_SIZE) >= le32_to_cpu(part->header.FormattedSize)) { |
| printk(KERN_NOTICE "ftl_cs: bad read offset\n"); |
| return -EIO; |
| } |
| log_addr = part->VirtualBlockMap[sector+i]; |
| if (log_addr == 0xffffffff) |
| memset(buffer, 0, SECTOR_SIZE); |
| else { |
| offset = (part->EUNInfo[log_addr / bsize].Offset |
| + (log_addr % bsize)); |
| ret = part->mbd.mtd->read(part->mbd.mtd, offset, SECTOR_SIZE, |
| &retlen, (u_char *) buffer); |
| |
| if (ret) { |
| printk(KERN_WARNING "Error reading MTD device in ftl_read()\n"); |
| return ret; |
| } |
| } |
| buffer += SECTOR_SIZE; |
| } |
| return 0; |
| } /* ftl_read */ |
| |
| /*====================================================================== |
| |
| Write a series of sectors to an FTL partition |
| |
| ======================================================================*/ |
| |
| static int set_bam_entry(partition_t *part, u_int32_t log_addr, |
| u_int32_t virt_addr) |
| { |
| u_int32_t bsize, blk, le_virt_addr; |
| #ifdef PSYCHO_DEBUG |
| u_int32_t old_addr; |
| #endif |
| u_int16_t eun; |
| int ret; |
| size_t retlen, offset; |
| |
| DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n", |
| part, log_addr, virt_addr); |
| bsize = 1 << part->header.EraseUnitSize; |
| eun = log_addr / bsize; |
| blk = (log_addr % bsize) / SECTOR_SIZE; |
| offset = (part->EUNInfo[eun].Offset + blk * sizeof(u_int32_t) + |
| le32_to_cpu(part->header.BAMOffset)); |
| |
| #ifdef PSYCHO_DEBUG |
| ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(u_int32_t), |
| &retlen, (u_char *)&old_addr); |
| if (ret) { |
| printk(KERN_WARNING"ftl: Error reading old_addr in set_bam_entry: %d\n",ret); |
| return ret; |
| } |
| old_addr = le32_to_cpu(old_addr); |
| |
| if (((virt_addr == 0xfffffffe) && !BLOCK_FREE(old_addr)) || |
| ((virt_addr == 0) && (BLOCK_TYPE(old_addr) != BLOCK_DATA)) || |
| (!BLOCK_DELETED(virt_addr) && (old_addr != 0xfffffffe))) { |
| static int ne = 0; |
| if (++ne < 5) { |
| printk(KERN_NOTICE "ftl_cs: set_bam_entry() inconsistency!\n"); |
| printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, old = 0x%x" |
| ", new = 0x%x\n", log_addr, old_addr, virt_addr); |
| } |
| return -EIO; |
| } |
| #endif |
| le_virt_addr = cpu_to_le32(virt_addr); |
| if (part->bam_index == eun) { |
| #ifdef PSYCHO_DEBUG |
| if (le32_to_cpu(part->bam_cache[blk]) != old_addr) { |
| static int ne = 0; |
| if (++ne < 5) { |
| printk(KERN_NOTICE "ftl_cs: set_bam_entry() " |
| "inconsistency!\n"); |
| printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, cache" |
| " = 0x%x\n", |
| le32_to_cpu(part->bam_cache[blk]), old_addr); |
| } |
| return -EIO; |
| } |
| #endif |
| part->bam_cache[blk] = le_virt_addr; |
| } |
| ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t), |
| &retlen, (u_char *)&le_virt_addr); |
| |
| if (ret) { |
| printk(KERN_NOTICE "ftl_cs: set_bam_entry() failed!\n"); |
| printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, new = 0x%x\n", |
| log_addr, virt_addr); |
| } |
| return ret; |
| } /* set_bam_entry */ |
| |
| static int ftl_write(partition_t *part, caddr_t buffer, |
| u_long sector, u_long nblocks) |
| { |
| u_int32_t bsize, log_addr, virt_addr, old_addr, blk; |
| u_long i; |
| int ret; |
| size_t retlen, offset; |
| |
| DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n", |
| part, sector, nblocks); |
| if (!(part->state & FTL_FORMATTED)) { |
| printk(KERN_NOTICE "ftl_cs: bad partition\n"); |
| return -EIO; |
| } |
| /* See if we need to reclaim space, before we start */ |
| while (part->FreeTotal < nblocks) { |
| ret = reclaim_block(part); |
| if (ret) |
| return ret; |
| } |
| |
| bsize = 1 << part->header.EraseUnitSize; |
| |
| virt_addr = sector * SECTOR_SIZE | BLOCK_DATA; |
| for (i = 0; i < nblocks; i++) { |
| if (virt_addr >= le32_to_cpu(part->header.FormattedSize)) { |
| printk(KERN_NOTICE "ftl_cs: bad write offset\n"); |
| return -EIO; |
| } |
| |
| /* Grab a free block */ |
| blk = find_free(part); |
| if (blk == 0) { |
| static int ne = 0; |
| if (++ne < 5) |
| printk(KERN_NOTICE "ftl_cs: internal error: " |
| "no free blocks!\n"); |
| return -ENOSPC; |
| } |
| |
| /* Tag the BAM entry, and write the new block */ |
| log_addr = part->bam_index * bsize + blk * SECTOR_SIZE; |
| part->EUNInfo[part->bam_index].Free--; |
| part->FreeTotal--; |
| if (set_bam_entry(part, log_addr, 0xfffffffe)) |
| return -EIO; |
| part->EUNInfo[part->bam_index].Deleted++; |
| offset = (part->EUNInfo[part->bam_index].Offset + |
| blk * SECTOR_SIZE); |
| ret = part->mbd.mtd->write(part->mbd.mtd, offset, SECTOR_SIZE, &retlen, |
| buffer); |
| |
| if (ret) { |
| printk(KERN_NOTICE "ftl_cs: block write failed!\n"); |
| printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, virt_addr" |
| " = 0x%x, Offset = 0x%zx\n", log_addr, virt_addr, |
| offset); |
| return -EIO; |
| } |
| |
| /* Only delete the old entry when the new entry is ready */ |
| old_addr = part->VirtualBlockMap[sector+i]; |
| if (old_addr != 0xffffffff) { |
| part->VirtualBlockMap[sector+i] = 0xffffffff; |
| part->EUNInfo[old_addr/bsize].Deleted++; |
| if (set_bam_entry(part, old_addr, 0)) |
| return -EIO; |
| } |
| |
| /* Finally, set up the new pointers */ |
| if (set_bam_entry(part, log_addr, virt_addr)) |
| return -EIO; |
| part->VirtualBlockMap[sector+i] = log_addr; |
| part->EUNInfo[part->bam_index].Deleted--; |
| |
| buffer += SECTOR_SIZE; |
| virt_addr += SECTOR_SIZE; |
| } |
| return 0; |
| } /* ftl_write */ |
| |
| static int ftl_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo) |
| { |
| partition_t *part = (void *)dev; |
| u_long sect; |
| |
| /* Sort of arbitrary: round size down to 4KiB boundary */ |
| sect = le32_to_cpu(part->header.FormattedSize)/SECTOR_SIZE; |
| |
| geo->heads = 1; |
| geo->sectors = 8; |
| geo->cylinders = sect >> 3; |
| |
| return 0; |
| } |
| |
| static int ftl_readsect(struct mtd_blktrans_dev *dev, |
| unsigned long block, char *buf) |
| { |
| return ftl_read((void *)dev, buf, block, 1); |
| } |
| |
| static int ftl_writesect(struct mtd_blktrans_dev *dev, |
| unsigned long block, char *buf) |
| { |
| return ftl_write((void *)dev, buf, block, 1); |
| } |
| |
| /*====================================================================*/ |
| |
| static void ftl_freepart(partition_t *part) |
| { |
| vfree(part->VirtualBlockMap); |
| part->VirtualBlockMap = NULL; |
| kfree(part->VirtualPageMap); |
| part->VirtualPageMap = NULL; |
| kfree(part->EUNInfo); |
| part->EUNInfo = NULL; |
| kfree(part->XferInfo); |
| part->XferInfo = NULL; |
| kfree(part->bam_cache); |
| part->bam_cache = NULL; |
| } /* ftl_freepart */ |
| |
| static void ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) |
| { |
| partition_t *partition; |
| |
| partition = kzalloc(sizeof(partition_t), GFP_KERNEL); |
| |
| if (!partition) { |
| printk(KERN_WARNING "No memory to scan for FTL on %s\n", |
| mtd->name); |
| return; |
| } |
| |
| partition->mbd.mtd = mtd; |
| |
| if ((scan_header(partition) == 0) && |
| (build_maps(partition) == 0)) { |
| |
| partition->state = FTL_FORMATTED; |
| #ifdef PCMCIA_DEBUG |
| printk(KERN_INFO "ftl_cs: opening %d KiB FTL partition\n", |
| le32_to_cpu(partition->header.FormattedSize) >> 10); |
| #endif |
| partition->mbd.size = le32_to_cpu(partition->header.FormattedSize) >> 9; |
| |
| partition->mbd.tr = tr; |
| partition->mbd.devnum = -1; |
| if (!add_mtd_blktrans_dev((void *)partition)) |
| return; |
| } |
| |
| ftl_freepart(partition); |
| kfree(partition); |
| } |
| |
| static void ftl_remove_dev(struct mtd_blktrans_dev *dev) |
| { |
| del_mtd_blktrans_dev(dev); |
| ftl_freepart((partition_t *)dev); |
| kfree(dev); |
| } |
| |
| static struct mtd_blktrans_ops ftl_tr = { |
| .name = "ftl", |
| .major = FTL_MAJOR, |
| .part_bits = PART_BITS, |
| .blksize = SECTOR_SIZE, |
| .readsect = ftl_readsect, |
| .writesect = ftl_writesect, |
| .getgeo = ftl_getgeo, |
| .add_mtd = ftl_add_mtd, |
| .remove_dev = ftl_remove_dev, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int init_ftl(void) |
| { |
| DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n"); |
| |
| return register_mtd_blktrans(&ftl_tr); |
| } |
| |
| static void __exit cleanup_ftl(void) |
| { |
| deregister_mtd_blktrans(&ftl_tr); |
| } |
| |
| module_init(init_ftl); |
| module_exit(cleanup_ftl); |
| |
| |
| MODULE_LICENSE("Dual MPL/GPL"); |
| MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); |
| MODULE_DESCRIPTION("Support code for Flash Translation Layer, used on PCMCIA devices"); |