[SCSI] lpfc 8.3.22: T10-DIF corrections
T10-DIF corrections
- Add selective reset jump table entry
- Split T10-DIF BDEs that cross 4K boundary
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index b64c6da..d9869f4 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -539,6 +539,8 @@
(struct lpfc_hba *, uint32_t);
int (*lpfc_hba_down_link)
(struct lpfc_hba *, uint32_t);
+ int (*lpfc_selective_reset)
+ (struct lpfc_hba *);
/* SLI4 specific HBA data structure */
struct lpfc_sli4_hba sli4_hba;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index e7c020d..427c046 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -685,7 +685,7 @@
* -EIO reset not configured or error posting the event
* zero for success
**/
-static int
+int
lpfc_selective_reset(struct lpfc_hba *phba)
{
struct completion online_compl;
@@ -746,7 +746,7 @@
int status = -EINVAL;
if (strncmp(buf, "selective", sizeof("selective") - 1) == 0)
- status = lpfc_selective_reset(phba);
+ status = phba->lpfc_selective_reset(phba);
if (status == 0)
return strlen(buf);
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 3d40023..60281d8 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -254,8 +254,8 @@
void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
uint32_t);
void lpfc_sli_wake_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *);
-
-void lpfc_reset_barrier(struct lpfc_hba * phba);
+int lpfc_selective_reset(struct lpfc_hba *);
+void lpfc_reset_barrier(struct lpfc_hba *);
int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
int lpfc_sli_brdkill(struct lpfc_hba *);
int lpfc_sli_brdreset(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 94ae37c..057ab82 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1713,6 +1713,17 @@
#define pde6_apptagval_WORD word2
};
+struct lpfc_pde7 {
+ uint32_t word0;
+#define pde7_type_SHIFT 24
+#define pde7_type_MASK 0x000000ff
+#define pde7_type_WORD word0
+#define pde7_rsvd0_SHIFT 0
+#define pde7_rsvd0_MASK 0x00ffffff
+#define pde7_rsvd0_WORD word0
+ uint32_t addrHigh;
+ uint32_t addrLow;
+};
/* Structure for MB Command LOAD_SM and DOWN_LOAD */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 35665cfb..29aab94 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4474,6 +4474,7 @@
{
phba->lpfc_hba_init_link = lpfc_hba_init_link;
phba->lpfc_hba_down_link = lpfc_hba_down_link;
+ phba->lpfc_selective_reset = lpfc_selective_reset;
switch (dev_grp) {
case LPFC_PCI_DEV_LP:
phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index bf34178..e3a1d29 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1514,10 +1514,11 @@
struct scatterlist *sgpe = NULL; /* s/g prot entry */
struct lpfc_pde5 *pde5 = NULL;
struct lpfc_pde6 *pde6 = NULL;
- struct ulp_bde64 *prot_bde = NULL;
+ struct lpfc_pde7 *pde7 = NULL;
dma_addr_t dataphysaddr, protphysaddr;
unsigned short curr_data = 0, curr_prot = 0;
- unsigned int split_offset, protgroup_len;
+ unsigned int split_offset;
+ unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
unsigned int protgrp_blks, protgrp_bytes;
unsigned int remainder, subtotal;
int status;
@@ -1585,23 +1586,33 @@
bpl++;
/* setup the first BDE that points to protection buffer */
- prot_bde = (struct ulp_bde64 *) bpl;
- protphysaddr = sg_dma_address(sgpe);
- prot_bde->addrHigh = le32_to_cpu(putPaddrLow(protphysaddr));
- prot_bde->addrLow = le32_to_cpu(putPaddrHigh(protphysaddr));
- protgroup_len = sg_dma_len(sgpe);
+ protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
+ protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
/* must be integer multiple of the DIF block length */
BUG_ON(protgroup_len % 8);
+ pde7 = (struct lpfc_pde7 *) bpl;
+ memset(pde7, 0, sizeof(struct lpfc_pde7));
+ bf_set(pde7_type, pde7, LPFC_PDE7_DESCRIPTOR);
+
+ pde7->addrHigh = le32_to_cpu(putPaddrLow(protphysaddr));
+ pde7->addrLow = le32_to_cpu(putPaddrHigh(protphysaddr));
+
protgrp_blks = protgroup_len / 8;
protgrp_bytes = protgrp_blks * blksize;
- prot_bde->tus.f.bdeSize = protgroup_len;
- prot_bde->tus.f.bdeFlags = LPFC_PDE7_DESCRIPTOR;
- prot_bde->tus.w = le32_to_cpu(bpl->tus.w);
+ /* check if this pde is crossing the 4K boundary; if so split */
+ if ((pde7->addrLow & 0xfff) + protgroup_len > 0x1000) {
+ protgroup_remainder = 0x1000 - (pde7->addrLow & 0xfff);
+ protgroup_offset += protgroup_remainder;
+ protgrp_blks = protgroup_remainder / 8;
+ protgrp_bytes = protgroup_remainder * blksize;
+ } else {
+ protgroup_offset = 0;
+ curr_prot++;
+ }
- curr_prot++;
num_bde++;
/* setup BDE's for data blocks associated with DIF data */
@@ -1653,6 +1664,13 @@
}
+ if (protgroup_offset) {
+ /* update the reference tag */
+ reftag += protgrp_blks;
+ bpl++;
+ continue;
+ }
+
/* are we done ? */
if (curr_prot == protcnt) {
alldone = 1;
@@ -1675,6 +1693,7 @@
return num_bde;
}
+
/*
* Given a SCSI command that supports DIF, determine composition of protection
* groups involved in setting up buffer lists