ASoC: codecs: wm8962: Fix register cache incoherency
The multi-component patch(commit f0fba2ad1) moved the allocation of the
register cache from the driver to the ASoC core. Most drivers where adjusted to
this, but the wm8962 driver still uses its own register cache for its
private functions, while functions from the ASoC core use the generic cache.
Thus we end up with two from each other incoherent caches, which can lead to
undefined behaviour.
This patch fixes the issue by changing the wm8962 driver to use the
generic register cache in its private functions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org (for 2.6.37 only)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 1304ca9..7c421cc 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -52,8 +52,6 @@
struct wm8962_priv {
struct snd_soc_codec *codec;
- u16 reg_cache[WM8962_MAX_REGISTER + 1];
-
int sysclk;
int sysclk_rate;
@@ -1991,8 +1989,7 @@
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = wm8962->reg_cache;
+ u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
@@ -2020,8 +2017,7 @@
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = wm8962->reg_cache;
+ u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
@@ -2329,8 +2325,7 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = wm8962->reg_cache;
+ u16 *reg_cache = codec->reg_cache;
int reg;
switch (w->shift) {
@@ -2719,7 +2714,7 @@
static void wm8962_sync_cache(struct snd_soc_codec *codec)
{
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
@@ -2732,13 +2727,13 @@
/* Sync back cached values if they're different from the
* hardware default.
*/
- for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (i == WM8962_SOFTWARE_RESET)
continue;
- if (wm8962->reg_cache[i] == wm8962_reg[i])
+ if (reg_cache[i] == wm8962_reg[i])
continue;
- snd_soc_write(codec, i, wm8962->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
@@ -3406,12 +3401,11 @@
#ifdef CONFIG_PM
static int wm8962_resume(struct snd_soc_codec *codec)
{
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int i;
/* Restore the registers */
- for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
switch (i) {
case WM8962_SOFTWARE_RESET:
continue;
@@ -3705,6 +3699,7 @@
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
struct i2c_client *i2c = container_of(codec->dev, struct i2c_client,
dev);
+ u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
wm8962->codec = codec;
@@ -3804,7 +3799,7 @@
/* Put the speakers into mono mode? */
if (pdata->spk_mono)
- wm8962->reg_cache[WM8962_CLASS_D_CONTROL_2]
+ reg_cache[WM8962_CLASS_D_CONTROL_2]
|= WM8962_SPK_MONO;
/* Micbias setup, detection enable and detection
@@ -3819,16 +3814,16 @@
}
/* Latch volume update bits */
- wm8962->reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
- wm8962->reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
- wm8962->reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
- wm8962->reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
- wm8962->reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
- wm8962->reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
- wm8962->reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
- wm8962->reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
- wm8962->reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
- wm8962->reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
+ reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
+ reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
+ reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
+ reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
+ reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
+ reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
+ reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
+ reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
+ reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
+ reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
wm8962_add_widgets(codec);