ACPI: thinkpad-acpi: use a separate platform device for hwmon and name it (v2)
Use a separate platform device and driver ("thinkpad_hwmon") to attach
hwmon attributes and class, and add a name attribute of "thinkpad" to
it, which defines the hwmon device name for libsensors4.
This makes thinkpad-acpi compatible with libsensors4 from lm-sensors, and
the platform driver and device split will make it much easier to separate
hwmon functionality into its own module later on.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt
index 60953d6..3b95bba 100644
--- a/Documentation/thinkpad-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -105,10 +105,15 @@
as a driver attribute (see below).
Sysfs driver attributes are on the driver's sysfs attribute space,
-for 2.6.20 this is /sys/bus/platform/drivers/thinkpad_acpi/.
+for 2.6.23 this is /sys/bus/platform/drivers/thinkpad_acpi/ and
+/sys/bus/platform/drivers/thinkpad_hwmon/
-Sysfs device attributes are on the driver's sysfs attribute space,
-for 2.6.20 this is /sys/devices/platform/thinkpad_acpi/.
+Sysfs device attributes are on the thinkpad_acpi device sysfs attribute
+space, for 2.6.23 this is /sys/devices/platform/thinkpad_acpi/.
+
+Sysfs device attributes for the sensors and fan are on the
+thinkpad_hwmon device's sysfs attribute space, but you should locate it
+looking for a hwmon device with the name attribute of "thinkpad".
Driver version
--------------
@@ -766,7 +771,7 @@
-------------------
procfs: /proc/acpi/ibm/thermal
-sysfs device attributes: (hwmon) temp*_input
+sysfs device attributes: (hwmon "thinkpad") temp*_input
Most ThinkPads include six or more separate temperature sensors but only
expose the CPU temperature through the standard ACPI methods. This
@@ -989,7 +994,9 @@
---------------------------------------------------------
procfs: /proc/acpi/ibm/fan
-sysfs device attributes: (hwmon) fan_input, pwm1, pwm1_enable
+sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
+ pwm1_enable
+sysfs hwmon driver attributes: fan_watchdog
NOTE NOTE NOTE: fan control operations are disabled by default for
safety reasons. To enable them, the module parameter "fan_control=1"
@@ -1131,7 +1138,7 @@
which can take up to two minutes. May return rubbish on older
ThinkPads.
-driver attribute fan_watchdog:
+hwmon driver attribute fan_watchdog:
Fan safety watchdog timer interval, in seconds. Minimum is
1 second, maximum is 120 seconds. 0 disables the watchdog.
@@ -1233,3 +1240,9 @@
layer, the radio switch generates input event EV_RADIO,
and the driver enables hot key handling by default in
the firmware.
+
+0x020000: ABI fix: added a separate hwmon platform device and
+ driver, which must be located by name (thinkpad)
+ and the hwmon class for libsensors4 (lm-sensors 3)
+ compatibility. Moved all hwmon attributes to this
+ new platform device.
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 0a33c6e..d5fb93e 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -22,7 +22,7 @@
*/
#define IBM_VERSION "0.16"
-#define TPACPI_SYSFS_VERSION 0x010000
+#define TPACPI_SYSFS_VERSION 0x020000
/*
* Changelog:
@@ -526,6 +526,7 @@
****************************************************************************/
static struct platform_device *tpacpi_pdev;
+static struct platform_device *tpacpi_sensors_pdev;
static struct class_device *tpacpi_hwmon;
static struct input_dev *tpacpi_inputdev;
static struct mutex tpacpi_inputdev_send_mutex;
@@ -553,6 +554,12 @@
.resume = tpacpi_resume_handler,
};
+static struct platform_driver tpacpi_hwmon_pdriver = {
+ .driver = {
+ .name = IBM_HWMON_DRVR_NAME,
+ .owner = THIS_MODULE,
+ },
+};
/*************************************************************************
* thinkpad-acpi driver attributes
@@ -2872,7 +2879,7 @@
switch(thermal_read_mode) {
case TPACPI_THERMAL_TPEC_16:
- res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ res = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&thermal_temp_input16_group);
if (res)
return res;
@@ -2880,7 +2887,7 @@
case TPACPI_THERMAL_TPEC_8:
case TPACPI_THERMAL_ACPI_TMP07:
case TPACPI_THERMAL_ACPI_UPDT:
- res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ res = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&thermal_temp_input8_group);
if (res)
return res;
@@ -2897,13 +2904,13 @@
{
switch(thermal_read_mode) {
case TPACPI_THERMAL_TPEC_16:
- sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
&thermal_temp_input16_group);
break;
case TPACPI_THERMAL_TPEC_8:
case TPACPI_THERMAL_ACPI_TMP07:
case TPACPI_THERMAL_ACPI_UPDT:
- sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
&thermal_temp_input16_group);
break;
case TPACPI_THERMAL_NONE:
@@ -3686,7 +3693,7 @@
__ATTR(fan1_input, S_IRUGO,
fan_fan1_input_show, NULL);
-/* sysfs fan fan_watchdog (driver) ------------------------------------- */
+/* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
char *buf)
{
@@ -3828,10 +3835,10 @@
if (fan_status_access_mode != TPACPI_FAN_NONE ||
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
- rc = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
if (!(rc < 0))
- rc = driver_create_file(&tpacpi_pdriver.driver,
+ rc = driver_create_file(&tpacpi_hwmon_pdriver.driver,
&driver_attr_fan_watchdog);
if (rc < 0)
return rc;
@@ -3914,8 +3921,8 @@
vdbg_printk(TPACPI_DBG_EXIT, "cancelling any pending fan watchdog tasks\n");
/* FIXME: can we really do this unconditionally? */
- sysfs_remove_group(&tpacpi_pdev->dev.kobj, &fan_attr_group);
- driver_remove_file(&tpacpi_pdriver.driver, &driver_attr_fan_watchdog);
+ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj, &fan_attr_group);
+ driver_remove_file(&tpacpi_hwmon_pdriver.driver, &driver_attr_fan_watchdog);
cancel_delayed_work(&fan_watchdog_task);
flush_scheduled_work();
@@ -4366,6 +4373,19 @@
****************************************************************************
****************************************************************************/
+/* sysfs name ---------------------------------------------------------- */
+static ssize_t thinkpad_acpi_pdev_name_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", IBM_NAME);
+}
+
+static struct device_attribute dev_attr_thinkpad_acpi_pdev_name =
+ __ATTR(name, S_IRUGO, thinkpad_acpi_pdev_name_show, NULL);
+
+/* --------------------------------------------------------------------- */
+
/* /proc support */
static struct proc_dir_entry *proc_dir;
@@ -4768,12 +4788,20 @@
ret = platform_driver_register(&tpacpi_pdriver);
if (ret) {
- printk(IBM_ERR "unable to register platform driver\n");
+ printk(IBM_ERR "unable to register main platform driver\n");
thinkpad_acpi_module_exit();
return ret;
}
tp_features.platform_drv_registered = 1;
+ ret = platform_driver_register(&tpacpi_hwmon_pdriver);
+ if (ret) {
+ printk(IBM_ERR "unable to register hwmon platform driver\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ tp_features.sensors_pdrv_registered = 1;
+
ret = tpacpi_create_driver_attributes(&tpacpi_pdriver.driver);
if (ret) {
printk(IBM_ERR "unable to create sysfs driver attributes\n");
@@ -4793,7 +4821,26 @@
thinkpad_acpi_module_exit();
return ret;
}
- tpacpi_hwmon = hwmon_device_register(&tpacpi_pdev->dev);
+ tpacpi_sensors_pdev = platform_device_register_simple(
+ IBM_HWMON_DRVR_NAME,
+ -1, NULL, 0);
+ if (IS_ERR(tpacpi_sensors_pdev)) {
+ ret = PTR_ERR(tpacpi_sensors_pdev);
+ tpacpi_sensors_pdev = NULL;
+ printk(IBM_ERR "unable to register hwmon platform device\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ ret = device_create_file(&tpacpi_sensors_pdev->dev,
+ &dev_attr_thinkpad_acpi_pdev_name);
+ if (ret) {
+ printk(IBM_ERR
+ "unable to create sysfs hwmon device attributes\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ tp_features.sensors_pdev_attrs_registered = 1;
+ tpacpi_hwmon = hwmon_device_register(&tpacpi_sensors_pdev->dev);
if (IS_ERR(tpacpi_hwmon)) {
ret = PTR_ERR(tpacpi_hwmon);
tpacpi_hwmon = NULL;
@@ -4864,12 +4911,20 @@
if (tpacpi_hwmon)
hwmon_device_unregister(tpacpi_hwmon);
+ if (tp_features.sensors_pdev_attrs_registered)
+ device_remove_file(&tpacpi_sensors_pdev->dev,
+ &dev_attr_thinkpad_acpi_pdev_name);
+ if (tpacpi_sensors_pdev)
+ platform_device_unregister(tpacpi_sensors_pdev);
if (tpacpi_pdev)
platform_device_unregister(tpacpi_pdev);
if (tp_features.platform_drv_attrs_registered)
tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver);
+ if (tp_features.sensors_pdrv_registered)
+ platform_driver_unregister(&tpacpi_hwmon_pdriver);
+
if (tp_features.platform_drv_registered)
platform_driver_unregister(&tpacpi_pdriver);
diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h
index fa64ded..791b8ca 100644
--- a/drivers/misc/thinkpad_acpi.h
+++ b/drivers/misc/thinkpad_acpi.h
@@ -58,13 +58,14 @@
#define IBM_NAME "thinkpad"
#define IBM_DESC "ThinkPad ACPI Extras"
-#define IBM_FILE "thinkpad_acpi"
+#define IBM_FILE IBM_NAME "_acpi"
#define IBM_URL "http://ibm-acpi.sf.net/"
#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net"
#define IBM_PROC_DIR "ibm"
#define IBM_ACPI_EVENT_PREFIX "ibm"
#define IBM_DRVR_NAME IBM_FILE
+#define IBM_HWMON_DRVR_NAME IBM_NAME "_hwmon"
#define IBM_LOG IBM_FILE ": "
#define IBM_ERR KERN_ERR IBM_LOG
@@ -171,6 +172,7 @@
/* Device model */
static struct platform_device *tpacpi_pdev;
+static struct platform_device *tpacpi_sensors_pdev;
static struct class_device *tpacpi_hwmon;
static struct platform_driver tpacpi_pdriver;
static struct input_dev *tpacpi_inputdev;
@@ -249,6 +251,8 @@
u32 input_device_registered:1;
u32 platform_drv_registered:1;
u32 platform_drv_attrs_registered:1;
+ u32 sensors_pdrv_registered:1;
+ u32 sensors_pdev_attrs_registered:1;
} tp_features;
struct thinkpad_id_data {