MIPS: Alchemy: Rewrite UART setup and constants.
Detect CPU type at runtime and setup uarts accordingly; also clean up the
uart base address mess in the process as far as possible.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2352/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 9e7814d..36489fb 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -30,21 +30,12 @@
#ifdef CONFIG_SERIAL_8250
switch (state) {
case 0:
- if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
- /* power-on sequence as suggested in the databooks */
- __raw_writel(0, port->membase + UART_MOD_CNTRL);
- wmb();
- __raw_writel(1, port->membase + UART_MOD_CNTRL);
- wmb();
- }
- __raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */
- wmb();
+ alchemy_uart_enable(CPHYSADDR(port->membase));
serial8250_do_pm(port, state, old_state);
break;
case 3: /* power off */
serial8250_do_pm(port, state, old_state);
- __raw_writel(0, port->membase + UART_MOD_CNTRL);
- wmb();
+ alchemy_uart_disable(CPHYSADDR(port->membase));
break;
default:
serial8250_do_pm(port, state, old_state);
@@ -65,38 +56,60 @@
.pm = alchemy_8250_pm, \
}
-static struct plat_serial8250_port au1x00_uart_data[] = {
-#if defined(CONFIG_SOC_AU1000)
- PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
- PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
- PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
-#elif defined(CONFIG_SOC_AU1500)
- PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
- PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
-#elif defined(CONFIG_SOC_AU1100)
- PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
- PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
-#elif defined(CONFIG_SOC_AU1550)
- PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
- PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
-#elif defined(CONFIG_SOC_AU1200)
- PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
-#endif
- { },
+static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
+ PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1100] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1200] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
+ },
};
static struct platform_device au1xx0_uart_device = {
.name = "serial8250",
.id = PLAT8250_DEV_AU1X00,
- .dev = {
- .platform_data = au1x00_uart_data,
- },
};
+static void __init alchemy_setup_uarts(int ctype)
+{
+ unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+ int s = sizeof(struct plat_serial8250_port);
+ int c = alchemy_get_uarts(ctype);
+ struct plat_serial8250_port *ports;
+
+ ports = kzalloc(s * (c + 1), GFP_KERNEL);
+ if (!ports) {
+ printk(KERN_INFO "Alchemy: no memory for UART data\n");
+ return;
+ }
+ memcpy(ports, au1x00_uart_data[ctype], s * c);
+ au1xx0_uart_device.dev.platform_data = ports;
+
+ /* Fill up uartclk. */
+ for (s = 0; s < c; s++)
+ ports[s].uartclk = uartclk;
+ if (platform_device_register(&au1xx0_uart_device))
+ printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+}
+
/* OHCI (USB full speed host controller) */
static struct resource au1xxx_usb_ohci_resources[] = {
[0] = {
@@ -442,7 +455,6 @@
}
static struct platform_device *au1xxx_platform_devices[] __initdata = {
- &au1xx0_uart_device,
&au1xxx_usb_ohci_device,
#ifdef CONFIG_FB_AU1100
&au1100_lcd_device,
@@ -465,13 +477,10 @@
static int __init au1xxx_platform_init(void)
{
- unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
- int err, i;
+ int err, i, ctype = alchemy_get_cputype();
unsigned char ethaddr[6];
- /* Fill up uartclk. */
- for (i = 0; au1x00_uart_data[i].flags; i++)
- au1x00_uart_data[i].uartclk = uartclk;
+ alchemy_setup_uarts(ctype);
/* use firmware-provided mac addr if available and necessary */
i = prom_get_ethernet_addr(ethaddr);