OMAP3: PM: Populate scratchpad contents
This patch populates the scratchpad contents as expected by the
bootROM code.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 6adb360c..03e1bce 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -17,9 +17,81 @@
#include <plat/common.h>
#include <plat/control.h>
+#include <plat/sdrc.h>
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "prm.h"
+#include "sdrc.h"
static void __iomem *omap2_ctrl_base;
+struct omap3_scratchpad {
+ u32 boot_config_ptr;
+ u32 public_restore_ptr;
+ u32 secure_ram_restore_ptr;
+ u32 sdrc_module_semaphore;
+ u32 prcm_block_offset;
+ u32 sdrc_block_offset;
+};
+
+struct omap3_scratchpad_prcm_block {
+ u32 prm_clksrc_ctrl;
+ u32 prm_clksel;
+ u32 cm_clksel_core;
+ u32 cm_clksel_wkup;
+ u32 cm_clken_pll;
+ u32 cm_autoidle_pll;
+ u32 cm_clksel1_pll;
+ u32 cm_clksel2_pll;
+ u32 cm_clksel3_pll;
+ u32 cm_clken_pll_mpu;
+ u32 cm_autoidle_pll_mpu;
+ u32 cm_clksel1_pll_mpu;
+ u32 cm_clksel2_pll_mpu;
+ u32 prcm_block_size;
+};
+
+struct omap3_scratchpad_sdrc_block {
+ u16 sysconfig;
+ u16 cs_cfg;
+ u16 sharing;
+ u16 err_type;
+ u32 dll_a_ctrl;
+ u32 dll_b_ctrl;
+ u32 power;
+ u32 cs_0;
+ u32 mcfg_0;
+ u16 mr_0;
+ u16 emr_1_0;
+ u16 emr_2_0;
+ u16 emr_3_0;
+ u32 actim_ctrla_0;
+ u32 actim_ctrlb_0;
+ u32 rfr_ctrl_0;
+ u32 cs_1;
+ u32 mcfg_1;
+ u16 mr_1;
+ u16 emr_1_1;
+ u16 emr_2_1;
+ u16 emr_3_1;
+ u32 actim_ctrla_1;
+ u32 actim_ctrlb_1;
+ u32 rfr_ctrl_1;
+ u16 dcdl_1_ctrl;
+ u16 dcdl_2_ctrl;
+ u32 flags;
+ u32 block_size;
+};
+
+/*
+ * This is used to store ARM registers in SDRAM before attempting
+ * an MPU OFF. The save and restore happens from the SRAM sleep code.
+ * The address is stored in scratchpad, so that it can be used
+ * during the restore path.
+ */
+u32 omap3_arm_context[128];
+
#define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
@@ -62,3 +134,134 @@
__raw_writel(val, OMAP_CTRL_REGADDR(offset));
}
+#ifdef CONFIG_ARCH_OMAP3
+/*
+ * Clears the scratchpad contents in case of cold boot-
+ * called during bootup
+ */
+void omap3_clear_scratchpad_contents(void)
+{
+ u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
+ u32 *v_addr;
+ u32 offset = 0;
+ v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
+ if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+ OMAP3430_GLOBAL_COLD_RST) {
+ for ( ; offset <= max_offset; offset += 0x4)
+ __raw_writel(0x0, (v_addr + offset));
+ prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD,
+ OMAP3_PRM_RSTST_OFFSET);
+ }
+}
+
+/* Populate the scratchpad structure with restore structure */
+void omap3_save_scratchpad_contents(void)
+{
+ void * __iomem scratchpad_address;
+ u32 arm_context_addr;
+ struct omap3_scratchpad scratchpad_contents;
+ struct omap3_scratchpad_prcm_block prcm_block_contents;
+ struct omap3_scratchpad_sdrc_block sdrc_block_contents;
+
+ /* Populate the Scratchpad contents */
+ scratchpad_contents.boot_config_ptr = 0x0;
+ scratchpad_contents.public_restore_ptr =
+ virt_to_phys(get_restore_pointer());
+ scratchpad_contents.secure_ram_restore_ptr = 0x0;
+ scratchpad_contents.sdrc_module_semaphore = 0x0;
+ scratchpad_contents.prcm_block_offset = 0x2C;
+ scratchpad_contents.sdrc_block_offset = 0x64;
+
+ /* Populate the PRCM block contents */
+ prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+ prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD,
+ OMAP3_PRM_CLKSEL_OFFSET);
+ prcm_block_contents.cm_clksel_core =
+ cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
+ prcm_block_contents.cm_clksel_wkup =
+ cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+ prcm_block_contents.cm_clken_pll =
+ cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKEN_PLL);
+ prcm_block_contents.cm_autoidle_pll =
+ cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+ prcm_block_contents.cm_clksel1_pll =
+ cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
+ prcm_block_contents.cm_clksel2_pll =
+ cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
+ prcm_block_contents.cm_clksel3_pll =
+ cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
+ prcm_block_contents.cm_clken_pll_mpu =
+ cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
+ prcm_block_contents.cm_autoidle_pll_mpu =
+ cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+ prcm_block_contents.cm_clksel1_pll_mpu =
+ cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
+ prcm_block_contents.cm_clksel2_pll_mpu =
+ cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+ prcm_block_contents.prcm_block_size = 0x0;
+
+ /* Populate the SDRC block contents */
+ sdrc_block_contents.sysconfig =
+ (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
+ sdrc_block_contents.cs_cfg =
+ (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
+ sdrc_block_contents.sharing =
+ (sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
+ sdrc_block_contents.err_type =
+ (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
+ sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
+ sdrc_block_contents.dll_b_ctrl = 0x0;
+ sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
+ sdrc_block_contents.cs_0 = 0x0;
+ sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
+ sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
+ sdrc_block_contents.emr_1_0 = 0x0;
+ sdrc_block_contents.emr_2_0 = 0x0;
+ sdrc_block_contents.emr_3_0 = 0x0;
+ sdrc_block_contents.actim_ctrla_0 =
+ sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
+ sdrc_block_contents.actim_ctrlb_0 =
+ sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
+ sdrc_block_contents.rfr_ctrl_0 =
+ sdrc_read_reg(SDRC_RFR_CTRL_0);
+ sdrc_block_contents.cs_1 = 0x0;
+ sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
+ sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
+ sdrc_block_contents.emr_1_1 = 0x0;
+ sdrc_block_contents.emr_2_1 = 0x0;
+ sdrc_block_contents.emr_3_1 = 0x0;
+ sdrc_block_contents.actim_ctrla_1 =
+ sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
+ sdrc_block_contents.actim_ctrlb_1 =
+ sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
+ sdrc_block_contents.rfr_ctrl_1 =
+ sdrc_read_reg(SDRC_RFR_CTRL_1);
+ sdrc_block_contents.dcdl_1_ctrl = 0x0;
+ sdrc_block_contents.dcdl_2_ctrl = 0x0;
+ sdrc_block_contents.flags = 0x0;
+ sdrc_block_contents.block_size = 0x0;
+
+ arm_context_addr = virt_to_phys(omap3_arm_context);
+
+ /* Copy all the contents to the scratchpad location */
+ scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+ memcpy_toio(scratchpad_address, &scratchpad_contents,
+ sizeof(scratchpad_contents));
+ /* Scratchpad contents being 32 bits, a divide by 4 done here */
+ memcpy_toio(scratchpad_address +
+ scratchpad_contents.prcm_block_offset,
+ &prcm_block_contents, sizeof(prcm_block_contents));
+ memcpy_toio(scratchpad_address +
+ scratchpad_contents.sdrc_block_offset,
+ &sdrc_block_contents, sizeof(sdrc_block_contents));
+ /*
+ * Copies the address of the location in SDRAM where ARM
+ * registers get saved during a MPU OFF transition.
+ */
+ memcpy_toio(scratchpad_address +
+ scratchpad_contents.sdrc_block_offset +
+ sizeof(sdrc_block_contents), &arm_context_addr, 4);
+}
+
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index 835f5b7..1076dd9 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -207,6 +207,10 @@
#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
+#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860)
+#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910)
+#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C
+
#ifndef __ASSEMBLY__
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
@@ -217,6 +221,12 @@
extern void omap_ctrl_writeb(u8 val, u16 offset);
extern void omap_ctrl_writew(u16 val, u16 offset);
extern void omap_ctrl_writel(u32 val, u16 offset);
+
+extern void omap3_save_scratchpad_contents(void);
+extern void omap3_clear_scratchpad_contents(void);
+extern u32 *get_restore_pointer(void);
+extern u32 omap3_arm_context[128];
+
#else
#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0