MIPS: Alchemy: Au1300 SoC support
Add basic support for the Au1300 variant(s):
- New GPIO/Interrupt controller
- DBDMA ids
- USB setup
- MMC support
- enable various PSC drivers
- detection code.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2866/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index c8e5d72..95cb911 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -82,6 +82,12 @@
PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
},
+ [ALCHEMY_CPU_AU1300] = {
+ PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
+ PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
+ PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
+ PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
+ },
};
static struct platform_device au1xx0_uart_device = {
@@ -122,10 +128,12 @@
[ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
[ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
[ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
+ [ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
};
static unsigned long alchemy_ehci_data[][2] __initdata = {
[ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
+ [ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
};
static int __init _new_usbres(struct resource **r, struct platform_device **d)
@@ -169,8 +177,8 @@
printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
- /* setup EHCI0: Au1200 */
- if (ctype == ALCHEMY_CPU_AU1200) {
+ /* setup EHCI0: Au1200/Au1300 */
+ if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
if (_new_usbres(&res, &pdev))
return;
@@ -187,6 +195,25 @@
if (platform_device_register(pdev))
printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
}
+
+ /* Au1300: OHCI1 */
+ if (ctype == ALCHEMY_CPU_AU1300) {
+ if (_new_usbres(&res, &pdev))
+ return;
+
+ res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
+ res[0].end = res[0].start + 0x100 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = AU1300_USB_INT;
+ res[1].end = res[1].start;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->name = "au1xxx-ohci";
+ pdev->id = 1;
+ pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+
+ if (platform_device_register(pdev))
+ printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
+ }
}
/* Macro to help defining the Ethernet MAC resources */