[media] Move CI cxd2099 driver to staging
This driver is abusing the kernel<=>userspace API, due to the lack of a
proper solution for it. A discussion were done at:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg22196.html
But there's not a solution for it yet. So, move the driver to staging, while
we don't have a final solution.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 5c8fcfc..4a88e69 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -51,6 +51,8 @@
source "drivers/staging/tm6000/Kconfig"
+source "drivers/staging/cxd2099/Kconfig"
+
source "drivers/staging/dabusb/Kconfig"
source "drivers/staging/se401/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index d538863..80ee49a 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_VIDEO_GO7007) += go7007/
obj-$(CONFIG_VIDEO_CX25821) += cx25821/
obj-$(CONFIG_VIDEO_TM6000) += tm6000/
+obj-$(CONFIG_DVB_CXD2099) += cxd2099/
obj-$(CONFIG_USB_DABUSB) += dabusb/
obj-$(CONFIG_USB_VICAM) += usbvideo/
obj-$(CONFIG_USB_SE401) += se401/
diff --git a/drivers/staging/cxd2099/Kconfig b/drivers/staging/cxd2099/Kconfig
new file mode 100644
index 0000000..9d638c3
--- /dev/null
+++ b/drivers/staging/cxd2099/Kconfig
@@ -0,0 +1,11 @@
+config DVB_CXD2099
+ tristate "CXD2099AR Common Interface driver"
+ depends on DVB_CORE && PCI && I2C && DVB_NGENE
+ ---help---
+ Support for the CI module found on cineS2 DVB-S2, supported by
+ the Micronas PCIe device driver (ngene).
+
+ For now, data is passed through '/dev/dvb/adapterX/sec0':
+ - Encrypted data must be written to 'sec0'.
+ - Decrypted data can be read from 'sec0'.
+ - Setup the CAM using device 'ca0'.
diff --git a/drivers/staging/cxd2099/Makefile b/drivers/staging/cxd2099/Makefile
new file mode 100644
index 0000000..72b1455
--- /dev/null
+++ b/drivers/staging/cxd2099/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_DVB_CXD2099) += cxd2099.o
+
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends/
+EXTRA_CFLAGS += -Idrivers/media/common/tuners/
diff --git a/drivers/staging/cxd2099/TODO b/drivers/staging/cxd2099/TODO
new file mode 100644
index 0000000..375bb6f
--- /dev/null
+++ b/drivers/staging/cxd2099/TODO
@@ -0,0 +1,12 @@
+For now, data is passed through '/dev/dvb/adapterX/sec0':
+ - Encrypted data must be written to 'sec0'.
+ - Decrypted data can be read from 'sec0'.
+ - Setup the CAM using device 'ca0'.
+
+But this is wrong. There are some discussions about the proper way for
+doing it, as seen at:
+ http://www.mail-archive.com/linux-media@vger.kernel.org/msg22196.html
+
+While there's no proper fix for it, the driver should be kept in staging.
+
+Patches should be submitted to: linux-media@vger.kernel.org.
diff --git a/drivers/staging/cxd2099/cxd2099.c b/drivers/staging/cxd2099/cxd2099.c
new file mode 100644
index 0000000..b49186c
--- /dev/null
+++ b/drivers/staging/cxd2099/cxd2099.c
@@ -0,0 +1,574 @@
+/*
+ * cxd2099.c: Driver for the CXD2099AR Common Interface Controller
+ *
+ * Copyright (C) 2010 DigitalDevices UG
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/version.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include "cxd2099.h"
+
+#define MAX_BUFFER_SIZE 248
+
+struct cxd {
+ struct dvb_ca_en50221 en;
+
+ struct i2c_adapter *i2c;
+ u8 adr;
+ u8 regs[0x23];
+ u8 lastaddress;
+ u8 clk_reg_f;
+ u8 clk_reg_b;
+ int mode;
+ u32 bitrate;
+ int ready;
+ int dr;
+ int slot_stat;
+
+ u8 amem[1024];
+ int amem_read;
+
+ int cammode;
+ struct mutex lock;
+};
+
+static int i2c_write_reg(struct i2c_adapter *adapter, u8 adr,
+ u8 reg, u8 data)
+{
+ u8 m[2] = {reg, data};
+ struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = m, .len = 2};
+
+ if (i2c_transfer(adapter, &msg, 1) != 1) {
+ printk(KERN_ERR "Failed to write to I2C register %02x@%02x!\n",
+ reg, adr);
+ return -1;
+ }
+ return 0;
+}
+
+static int i2c_write(struct i2c_adapter *adapter, u8 adr,
+ u8 *data, u8 len)
+{
+ struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = data, .len = len};
+
+ if (i2c_transfer(adapter, &msg, 1) != 1) {
+ printk(KERN_ERR "Failed to write to I2C!\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr,
+ u8 reg, u8 *val)
+{
+ struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
+ .buf = ®, .len = 1 },
+ {.addr = adr, .flags = I2C_M_RD,
+ .buf = val, .len = 1 } };
+
+ if (i2c_transfer(adapter, msgs, 2) != 2) {
+ printk(KERN_ERR "error in i2c_read_reg\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int i2c_read(struct i2c_adapter *adapter, u8 adr,
+ u8 reg, u8 *data, u8 n)
+{
+ struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
+ .buf = ®, .len = 1 },
+ {.addr = adr, .flags = I2C_M_RD,
+ .buf = data, .len = n } };
+
+ if (i2c_transfer(adapter, msgs, 2) != 2) {
+ printk(KERN_ERR "error in i2c_read\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int read_block(struct cxd *ci, u8 adr, u8 *data, u8 n)
+{
+ int status;
+
+ status = i2c_write_reg(ci->i2c, ci->adr, 0, adr);
+ if (!status) {
+ ci->lastaddress = adr;
+ status = i2c_read(ci->i2c, ci->adr, 1, data, n);
+ }
+ return status;
+}
+
+static int read_reg(struct cxd *ci, u8 reg, u8 *val)
+{
+ return read_block(ci, reg, val, 1);
+}
+
+
+static int read_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
+{
+ int status;
+ u8 addr[3] = { 2, address&0xff, address>>8 };
+
+ status = i2c_write(ci->i2c, ci->adr, addr, 3);
+ if (!status)
+ status = i2c_read(ci->i2c, ci->adr, 3, data, n);
+ return status;
+}
+
+static int write_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
+{
+ int status;
+ u8 addr[3] = { 2, address&0xff, address>>8 };
+
+ status = i2c_write(ci->i2c, ci->adr, addr, 3);
+ if (!status) {
+ u8 buf[256] = {3};
+ memcpy(buf+1, data, n);
+ status = i2c_write(ci->i2c, ci->adr, buf, n+1);
+ }
+ return status;
+}
+
+static int read_io(struct cxd *ci, u16 address, u8 *val)
+{
+ int status;
+ u8 addr[3] = { 2, address&0xff, address>>8 };
+
+ status = i2c_write(ci->i2c, ci->adr, addr, 3);
+ if (!status)
+ status = i2c_read(ci->i2c, ci->adr, 3, val, 1);
+ return status;
+}
+
+static int write_io(struct cxd *ci, u16 address, u8 val)
+{
+ int status;
+ u8 addr[3] = { 2, address&0xff, address>>8 };
+ u8 buf[2] = { 3, val };
+
+ status = i2c_write(ci->i2c, ci->adr, addr, 3);
+ if (!status)
+ status = i2c_write(ci->i2c, ci->adr, buf, 2);
+
+ return status;
+}
+
+
+static int write_regm(struct cxd *ci, u8 reg, u8 val, u8 mask)
+{
+ int status;
+
+ status = i2c_write_reg(ci->i2c, ci->adr, 0, reg);
+ if (!status && reg >= 6 && reg <= 8 && mask != 0xff)
+ status = i2c_read_reg(ci->i2c, ci->adr, 1, &ci->regs[reg]);
+ ci->regs[reg] = (ci->regs[reg]&(~mask))|val;
+ if (!status) {
+ ci->lastaddress = reg;
+ status = i2c_write_reg(ci->i2c, ci->adr, 1, ci->regs[reg]);
+ }
+ if (reg == 0x20)
+ ci->regs[reg] &= 0x7f;
+ return status;
+}
+
+static int write_reg(struct cxd *ci, u8 reg, u8 val)
+{
+ return write_regm(ci, reg, val, 0xff);
+}
+
+#ifdef BUFFER_MODE
+static int write_block(struct cxd *ci, u8 adr, u8 *data, int n)
+{
+ int status;
+ u8 buf[256] = {1};
+
+ status = i2c_write_reg(ci->i2c, ci->adr, 0, adr);
+ if (!status) {
+ ci->lastaddress = adr;
+ memcpy(buf+1, data, n);
+ status = i2c_write(ci->i2c, ci->adr, buf, n+1);
+ }
+ return status;
+}
+#endif
+
+static void set_mode(struct cxd *ci, int mode)
+{
+ if (mode == ci->mode)
+ return;
+
+ switch (mode) {
+ case 0x00: /* IO mem */
+ write_regm(ci, 0x06, 0x00, 0x07);
+ break;
+ case 0x01: /* ATT mem */
+ write_regm(ci, 0x06, 0x02, 0x07);
+ break;
+ default:
+ break;
+ }
+ ci->mode = mode;
+}
+
+static void cam_mode(struct cxd *ci, int mode)
+{
+ if (mode == ci->cammode)
+ return;
+
+ switch (mode) {
+ case 0x00:
+ write_regm(ci, 0x20, 0x80, 0x80);
+ break;
+ case 0x01:
+ printk(KERN_INFO "enable cam buffer mode\n");
+ /* write_reg(ci, 0x0d, 0x00); */
+ /* write_reg(ci, 0x0e, 0x01); */
+ write_regm(ci, 0x08, 0x40, 0x40);
+ /* read_reg(ci, 0x12, &dummy); */
+ write_regm(ci, 0x08, 0x80, 0x80);
+ break;
+ default:
+ break;
+ }
+ ci->cammode = mode;
+}
+
+
+
+#define CHK_ERROR(s) if ((status = s)) break
+
+static int init(struct cxd *ci)
+{
+ int status;
+
+ mutex_lock(&ci->lock);
+ ci->mode = -1;
+ do {
+ CHK_ERROR(write_reg(ci, 0x00, 0x00));
+ CHK_ERROR(write_reg(ci, 0x01, 0x00));
+ CHK_ERROR(write_reg(ci, 0x02, 0x10));
+ CHK_ERROR(write_reg(ci, 0x03, 0x00));
+ CHK_ERROR(write_reg(ci, 0x05, 0xFF));
+ CHK_ERROR(write_reg(ci, 0x06, 0x1F));
+ CHK_ERROR(write_reg(ci, 0x07, 0x1F));
+ CHK_ERROR(write_reg(ci, 0x08, 0x28));
+ CHK_ERROR(write_reg(ci, 0x14, 0x20));
+
+ CHK_ERROR(write_reg(ci, 0x09, 0x4D)); /* Input Mode C, BYPass Serial, TIVAL = low, MSB */
+ CHK_ERROR(write_reg(ci, 0x0A, 0xA7)); /* TOSTRT = 8, Mode B (gated clock), falling Edge, Serial, POL=HIGH, MSB */
+
+ /* Sync detector */
+ CHK_ERROR(write_reg(ci, 0x0B, 0x33));
+ CHK_ERROR(write_reg(ci, 0x0C, 0x33));
+
+ CHK_ERROR(write_regm(ci, 0x14, 0x00, 0x0F));
+ CHK_ERROR(write_reg(ci, 0x15, ci->clk_reg_b));
+ CHK_ERROR(write_regm(ci, 0x16, 0x00, 0x0F));
+ CHK_ERROR(write_reg(ci, 0x17, ci->clk_reg_f));
+
+ CHK_ERROR(write_reg(ci, 0x20, 0x28)); /* Integer Divider, Falling Edge, Internal Sync, */
+ CHK_ERROR(write_reg(ci, 0x21, 0x00)); /* MCLKI = TICLK/8 */
+ CHK_ERROR(write_reg(ci, 0x22, 0x07)); /* MCLKI = TICLK/8 */
+
+
+ CHK_ERROR(write_regm(ci, 0x20, 0x80, 0x80)); /* Reset CAM state machine */
+
+ CHK_ERROR(write_regm(ci, 0x03, 0x02, 02)); /* Enable IREQA Interrupt */
+ CHK_ERROR(write_reg(ci, 0x01, 0x04)); /* Enable CD Interrupt */
+ CHK_ERROR(write_reg(ci, 0x00, 0x31)); /* Enable TS1,Hot Swap,Slot A */
+ CHK_ERROR(write_regm(ci, 0x09, 0x08, 0x08)); /* Put TS in bypass */
+ ci->cammode = -1;
+#ifdef BUFFER_MODE
+ cam_mode(ci, 0);
+#endif
+ } while (0);
+ mutex_unlock(&ci->lock);
+
+ return 0;
+}
+
+
+static int read_attribute_mem(struct dvb_ca_en50221 *ca,
+ int slot, int address)
+{
+ struct cxd *ci = ca->data;
+ u8 val;
+ mutex_lock(&ci->lock);
+ set_mode(ci, 1);
+ read_pccard(ci, address, &val, 1);
+ mutex_unlock(&ci->lock);
+ return val;
+}
+
+
+static int write_attribute_mem(struct dvb_ca_en50221 *ca, int slot,
+ int address, u8 value)
+{
+ struct cxd *ci = ca->data;
+
+ mutex_lock(&ci->lock);
+ set_mode(ci, 1);
+ write_pccard(ci, address, &value, 1);
+ mutex_unlock(&ci->lock);
+ return 0;
+}
+
+static int read_cam_control(struct dvb_ca_en50221 *ca,
+ int slot, u8 address)
+{
+ struct cxd *ci = ca->data;
+ u8 val;
+
+ mutex_lock(&ci->lock);
+ set_mode(ci, 0);
+ read_io(ci, address, &val);
+ mutex_unlock(&ci->lock);
+ return val;
+}
+
+static int write_cam_control(struct dvb_ca_en50221 *ca, int slot,
+ u8 address, u8 value)
+{
+ struct cxd *ci = ca->data;
+
+ mutex_lock(&ci->lock);
+ set_mode(ci, 0);
+ write_io(ci, address, value);
+ mutex_unlock(&ci->lock);
+ return 0;
+}
+
+static int slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct cxd *ci = ca->data;
+
+ mutex_lock(&ci->lock);
+ cam_mode(ci, 0);
+ write_reg(ci, 0x00, 0x21);
+ write_reg(ci, 0x06, 0x1F);
+ write_reg(ci, 0x00, 0x31);
+ write_regm(ci, 0x20, 0x80, 0x80);
+ write_reg(ci, 0x03, 0x02);
+ ci->ready = 0;
+ ci->mode = -1;
+ {
+ int i;
+ for (i = 0; i < 100; i++) {
+ msleep(10);
+ if (ci->ready)
+ break;
+ }
+ }
+ mutex_unlock(&ci->lock);
+ /* msleep(500); */
+ return 0;
+}
+
+static int slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct cxd *ci = ca->data;
+
+ printk(KERN_INFO "slot_shutdown\n");
+ mutex_lock(&ci->lock);
+ /* write_regm(ci, 0x09, 0x08, 0x08); */
+ write_regm(ci, 0x20, 0x80, 0x80);
+ write_regm(ci, 0x06, 0x07, 0x07);
+ ci->mode = -1;
+ mutex_unlock(&ci->lock);
+ return 0; /* shutdown(ci); */
+}
+
+static int slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct cxd *ci = ca->data;
+
+ mutex_lock(&ci->lock);
+ write_regm(ci, 0x09, 0x00, 0x08);
+ set_mode(ci, 0);
+#ifdef BUFFER_MODE
+ cam_mode(ci, 1);
+#endif
+ mutex_unlock(&ci->lock);
+ return 0;
+}
+
+
+static int campoll(struct cxd *ci)
+{
+ u8 istat;
+
+ read_reg(ci, 0x04, &istat);
+ if (!istat)
+ return 0;
+ write_reg(ci, 0x05, istat);
+
+ if (istat&0x40) {
+ ci->dr = 1;
+ printk(KERN_INFO "DR\n");
+ }
+ if (istat&0x20)
+ printk(KERN_INFO "WC\n");
+
+ if (istat&2) {
+ u8 slotstat;
+
+ read_reg(ci, 0x01, &slotstat);
+ if (!(2&slotstat)) {
+ if (!ci->slot_stat) {
+ ci->slot_stat |= DVB_CA_EN50221_POLL_CAM_PRESENT;
+ write_regm(ci, 0x03, 0x08, 0x08);
+ }
+
+ } else {
+ if (ci->slot_stat) {
+ ci->slot_stat = 0;
+ write_regm(ci, 0x03, 0x00, 0x08);
+ printk(KERN_INFO "NO CAM\n");
+ ci->ready = 0;
+ }
+ }
+ if (istat&8 && ci->slot_stat == DVB_CA_EN50221_POLL_CAM_PRESENT) {
+ ci->ready = 1;
+ ci->slot_stat |= DVB_CA_EN50221_POLL_CAM_READY;
+ printk(KERN_INFO "READY\n");
+ }
+ }
+ return 0;
+}
+
+
+static int poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct cxd *ci = ca->data;
+ u8 slotstat;
+
+ mutex_lock(&ci->lock);
+ campoll(ci);
+ read_reg(ci, 0x01, &slotstat);
+ mutex_unlock(&ci->lock);
+
+ return ci->slot_stat;
+}
+
+#ifdef BUFFER_MODE
+static int read_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount)
+{
+ struct cxd *ci = ca->data;
+ u8 msb, lsb;
+ u16 len;
+
+ mutex_lock(&ci->lock);
+ campoll(ci);
+ mutex_unlock(&ci->lock);
+
+ printk(KERN_INFO "read_data\n");
+ if (!ci->dr)
+ return 0;
+
+ mutex_lock(&ci->lock);
+ read_reg(ci, 0x0f, &msb);
+ read_reg(ci, 0x10, &lsb);
+ len = (msb<<8)|lsb;
+ read_block(ci, 0x12, ebuf, len);
+ ci->dr = 0;
+ mutex_unlock(&ci->lock);
+
+ return len;
+}
+
+static int write_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount)
+{
+ struct cxd *ci = ca->data;
+
+ mutex_lock(&ci->lock);
+ printk(KERN_INFO "write_data %d\n", ecount);
+ write_reg(ci, 0x0d, ecount>>8);
+ write_reg(ci, 0x0e, ecount&0xff);
+ write_block(ci, 0x11, ebuf, ecount);
+ mutex_unlock(&ci->lock);
+ return ecount;
+}
+#endif
+
+static struct dvb_ca_en50221 en_templ = {
+ .read_attribute_mem = read_attribute_mem,
+ .write_attribute_mem = write_attribute_mem,
+ .read_cam_control = read_cam_control,
+ .write_cam_control = write_cam_control,
+ .slot_reset = slot_reset,
+ .slot_shutdown = slot_shutdown,
+ .slot_ts_enable = slot_ts_enable,
+ .poll_slot_status = poll_slot_status,
+#ifdef BUFFER_MODE
+ .read_data = read_data,
+ .write_data = write_data,
+#endif
+
+};
+
+struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv,
+ struct i2c_adapter *i2c)
+{
+ struct cxd *ci = 0;
+ u32 bitrate = 62000000;
+ u8 val;
+
+ if (i2c_read_reg(i2c, adr, 0, &val) < 0) {
+ printk(KERN_ERR "No CXD2099 detected at %02x\n", adr);
+ return 0;
+ }
+
+ ci = kmalloc(sizeof(struct cxd), GFP_KERNEL);
+ if (!ci)
+ return 0;
+ memset(ci, 0, sizeof(*ci));
+
+ mutex_init(&ci->lock);
+ ci->i2c = i2c;
+ ci->adr = adr;
+ ci->lastaddress = 0xff;
+ ci->clk_reg_b = 0x4a;
+ ci->clk_reg_f = 0x1b;
+ ci->bitrate = bitrate;
+
+ memcpy(&ci->en, &en_templ, sizeof(en_templ));
+ ci->en.data = ci;
+ init(ci);
+ printk(KERN_INFO "Attached CXD2099AR at %02x\n", ci->adr);
+ return &ci->en;
+}
+EXPORT_SYMBOL(cxd2099_attach);
+
+MODULE_DESCRIPTION("cxd2099");
+MODULE_AUTHOR("Ralph Metzler <rjkm@metzlerbros.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/cxd2099/cxd2099.h b/drivers/staging/cxd2099/cxd2099.h
new file mode 100644
index 0000000..a313dc2
--- /dev/null
+++ b/drivers/staging/cxd2099/cxd2099.h
@@ -0,0 +1,41 @@
+/*
+ * cxd2099.h: Driver for the CXD2099AR Common Interface Controller
+ *
+ * Copyright (C) 2010 DigitalDevices UG
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef _CXD2099_H_
+#define _CXD2099_H_
+
+#include <dvb_ca_en50221.h>
+
+#if defined(CONFIG_DVB_CXD2099) || \
+ (defined(CONFIG_DVB_CXD2099_MODULE) && defined(MODULE))
+struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv, struct i2c_adapter *i2c);
+#else
+struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv, struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif