UBI: fix multiple spelling typos
Some of the typos were indicated by Adrian Hunter,
some by 'aspell'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 632b95f..b656556 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -951,7 +951,7 @@
* physical eraseblock @to. The @vid_hdr buffer may be changed by this
* function. Returns:
* o %0 in case of success;
- * o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, or %MOVE_CANCEL_BITFLIPS;
+ * o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, %MOVE_CANCEL_BITFLIPS, etc;
* o a negative error code in case of failure.
*/
int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index ac6604a..effaff2 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -899,7 +899,7 @@
* o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
* and corrected by the flash driver; this is harmless but may indicate that
* this eraseblock may become bad soon;
- * o %UBI_IO_BAD_VID_HRD if the volume identifier header is corrupted (a CRC
+ * o %UBI_IO_BAD_VID_HDR if the volume identifier header is corrupted (a CRC
* error detected);
* o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID
* header there);
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 82da62b..70ce48b 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -333,8 +333,8 @@
* protected from the wear-leveling worker)
* @pq_head: protection queue head
* @wl_lock: protects the @used, @free, @pq, @pq_head, @lookuptbl, @move_from,
- * @move_to, @move_to_put @erase_pending, @wl_scheduled, @works and
- * @erroneous_peb_count fields
+ * @move_to, @move_to_put @erase_pending, @wl_scheduled, @works,
+ * @erroneous, and @erroneous_peb_count fields
* @move_mutex: serializes eraseblock moves
* @work_sem: synchronizes the WL worker with use tasks
* @wl_scheduled: non-zero if the wear-leveling was scheduled
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index acb5520..2b24723 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -83,7 +83,7 @@
* used. The former state corresponds to the @wl->free tree. The latter state
* is split up on several sub-states:
* o the WL movement is allowed (@wl->used tree);
- * o the WL movement is disallowed (@wl->erroneous) becouse the PEB is
+ * o the WL movement is disallowed (@wl->erroneous) because the PEB is
* erroneous - e.g., there was a read error;
* o the WL movement is temporarily prohibited (@wl->pq queue);
* o scrubbing is needed (@wl->scrub tree).
@@ -744,8 +744,8 @@
* given, so we have a situation when it has not yet
* had a chance to write it, because it was preempted.
* So add this PEB to the protection queue so far,
- * because presubably more data will be written there
- * (including the missin VID header), and then we'll
+ * because presumably more data will be written there
+ * (including the missing VID header), and then we'll
* move it.
*/
dbg_wl("PEB %d has no VID header", e1->pnum);
@@ -790,8 +790,8 @@
* not switch to R/O mode in this case, and give the
* upper layers a possibility to recover from this,
* e.g. by unmapping corresponding LEB. Instead, just
- * put thie PEB to the @ubi->erroneus list to prevent
- * UBI from trying to move the over and over again.
+ * put this PEB to the @ubi->erroneous list to prevent
+ * UBI from trying to move it over and over again.
*/
if (ubi->erroneous_peb_count > ubi->max_erroneous) {
ubi_err("too many erroneous eraseblocks (%d)",
@@ -1045,7 +1045,7 @@
/*
* If this is not %-EIO, we have no idea what to do. Scheduling
* this physical eraseblock for erasure again would cause
- * errors again and again. Well, lets switch to RO mode.
+ * errors again and again. Well, lets switch to R/O mode.
*/
goto out_ro;
}
@@ -1161,7 +1161,7 @@
rb_erase(&e->u.rb, &ubi->erroneous);
ubi->erroneous_peb_count -= 1;
ubi_assert(ubi->erroneous_peb_count >= 0);
- /* Erronious PEBs should be tortured */
+ /* Erroneous PEBs should be tortured */
torture = 1;
} else {
err = prot_queue_del(ubi, e->pnum);