ARM: i.MX53: Add full iomux support for mx53
This iomux file contains all the available pins that are iomux
capable.
Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index caee04c..eba9df0 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
*/
@@ -42,28 +42,28 @@
#include "devices-imx53.h"
static iomux_v3_cfg_t mx53_evk_pads[] = {
- MX53_PAD_CSI0_D10__UART1_TXD,
- MX53_PAD_CSI0_D11__UART1_RXD,
- MX53_PAD_ATA_DIOW__UART1_TXD,
- MX53_PAD_ATA_DMACK__UART1_RXD,
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
- MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
- MX53_PAD_ATA_DMARQ__UART2_TXD,
- MX53_PAD_ATA_DIOR__UART2_RTS,
- MX53_PAD_ATA_INTRQ__UART2_CTS,
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
+ MX53_PAD_PATA_DIOR__UART2_RTS,
+ MX53_PAD_PATA_INTRQ__UART2_CTS,
- MX53_PAD_ATA_CS_0__UART3_TXD,
- MX53_PAD_ATA_CS_1__UART3_RXD,
- MX53_PAD_ATA_DA_1__UART3_CTS,
- MX53_PAD_ATA_DA_2__UART3_RTS,
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
+ MX53_PAD_PATA_DA_1__UART3_CTS,
+ MX53_PAD_PATA_DA_2__UART3_RTS,
- MX53_PAD_EIM_D16__CSPI1_SCLK,
- MX53_PAD_EIM_D17__CSPI1_MISO,
- MX53_PAD_EIM_D18__CSPI1_MOSI,
+ MX53_PAD_EIM_D16__ECSPI1_SCLK,
+ MX53_PAD_EIM_D17__ECSPI1_MISO,
+ MX53_PAD_EIM_D18__ECSPI1_MOSI,
/* ecspi chip select lines */
- MX53_PAD_EIM_EB2__GPIO_2_30,
- MX53_PAD_EIM_D19__GPIO_3_19,
+ MX53_PAD_EIM_EB2__GPIO2_30,
+ MX53_PAD_EIM_D19__GPIO3_19,
};
static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {