| /* |
| * Core of Xen paravirt_ops implementation. |
| * |
| * This file contains the xen_paravirt_ops structure itself, and the |
| * implementations for: |
| * - privileged instructions |
| * - interrupt flags |
| * - segment operations |
| * - booting and setup |
| * |
| * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007 |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/smp.h> |
| #include <linux/preempt.h> |
| #include <linux/hardirq.h> |
| #include <linux/percpu.h> |
| #include <linux/delay.h> |
| #include <linux/start_kernel.h> |
| #include <linux/sched.h> |
| #include <linux/bootmem.h> |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/page-flags.h> |
| #include <linux/highmem.h> |
| #include <linux/console.h> |
| |
| #include <xen/interface/xen.h> |
| #include <xen/interface/physdev.h> |
| #include <xen/interface/vcpu.h> |
| #include <xen/interface/sched.h> |
| #include <xen/features.h> |
| #include <xen/page.h> |
| |
| #include <asm/paravirt.h> |
| #include <asm/page.h> |
| #include <asm/xen/hypercall.h> |
| #include <asm/xen/hypervisor.h> |
| #include <asm/fixmap.h> |
| #include <asm/processor.h> |
| #include <asm/setup.h> |
| #include <asm/desc.h> |
| #include <asm/pgtable.h> |
| #include <asm/tlbflush.h> |
| #include <asm/reboot.h> |
| |
| #include "xen-ops.h" |
| #include "mmu.h" |
| #include "multicalls.h" |
| |
| EXPORT_SYMBOL_GPL(hypercall_page); |
| |
| DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu); |
| DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info); |
| |
| /* |
| * Note about cr3 (pagetable base) values: |
| * |
| * xen_cr3 contains the current logical cr3 value; it contains the |
| * last set cr3. This may not be the current effective cr3, because |
| * its update may be being lazily deferred. However, a vcpu looking |
| * at its own cr3 can use this value knowing that it everything will |
| * be self-consistent. |
| * |
| * xen_current_cr3 contains the actual vcpu cr3; it is set once the |
| * hypercall to set the vcpu cr3 is complete (so it may be a little |
| * out of date, but it will never be set early). If one vcpu is |
| * looking at another vcpu's cr3 value, it should use this variable. |
| */ |
| DEFINE_PER_CPU(unsigned long, xen_cr3); /* cr3 stored as physaddr */ |
| DEFINE_PER_CPU(unsigned long, xen_current_cr3); /* actual vcpu cr3 */ |
| |
| struct start_info *xen_start_info; |
| EXPORT_SYMBOL_GPL(xen_start_info); |
| |
| static /* __initdata */ struct shared_info dummy_shared_info; |
| |
| /* |
| * Point at some empty memory to start with. We map the real shared_info |
| * page as soon as fixmap is up and running. |
| */ |
| struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; |
| |
| /* |
| * Flag to determine whether vcpu info placement is available on all |
| * VCPUs. We assume it is to start with, and then set it to zero on |
| * the first failure. This is because it can succeed on some VCPUs |
| * and not others, since it can involve hypervisor memory allocation, |
| * or because the guest failed to guarantee all the appropriate |
| * constraints on all VCPUs (ie buffer can't cross a page boundary). |
| * |
| * Note that any particular CPU may be using a placed vcpu structure, |
| * but we can only optimise if the all are. |
| * |
| * 0: not available, 1: available |
| */ |
| static int have_vcpu_info_placement = 1; |
| |
| static void __init xen_vcpu_setup(int cpu) |
| { |
| struct vcpu_register_vcpu_info info; |
| int err; |
| struct vcpu_info *vcpup; |
| |
| BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info); |
| per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; |
| |
| if (!have_vcpu_info_placement) |
| return; /* already tested, not available */ |
| |
| vcpup = &per_cpu(xen_vcpu_info, cpu); |
| |
| info.mfn = virt_to_mfn(vcpup); |
| info.offset = offset_in_page(vcpup); |
| |
| printk(KERN_DEBUG "trying to map vcpu_info %d at %p, mfn %llx, offset %d\n", |
| cpu, vcpup, info.mfn, info.offset); |
| |
| /* Check to see if the hypervisor will put the vcpu_info |
| structure where we want it, which allows direct access via |
| a percpu-variable. */ |
| err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); |
| |
| if (err) { |
| printk(KERN_DEBUG "register_vcpu_info failed: err=%d\n", err); |
| have_vcpu_info_placement = 0; |
| } else { |
| /* This cpu is using the registered vcpu info, even if |
| later ones fail to. */ |
| per_cpu(xen_vcpu, cpu) = vcpup; |
| |
| printk(KERN_DEBUG "cpu %d using vcpu_info at %p\n", |
| cpu, vcpup); |
| } |
| } |
| |
| static void __init xen_banner(void) |
| { |
| printk(KERN_INFO "Booting paravirtualized kernel on %s\n", |
| pv_info.name); |
| printk(KERN_INFO "Hypervisor signature: %s\n", xen_start_info->magic); |
| } |
| |
| static void xen_cpuid(unsigned int *ax, unsigned int *bx, |
| unsigned int *cx, unsigned int *dx) |
| { |
| unsigned maskedx = ~0; |
| |
| /* |
| * Mask out inconvenient features, to try and disable as many |
| * unsupported kernel subsystems as possible. |
| */ |
| if (*ax == 1) |
| maskedx = ~((1 << X86_FEATURE_APIC) | /* disable APIC */ |
| (1 << X86_FEATURE_ACPI) | /* disable ACPI */ |
| (1 << X86_FEATURE_MCE) | /* disable MCE */ |
| (1 << X86_FEATURE_MCA) | /* disable MCA */ |
| (1 << X86_FEATURE_ACC)); /* thermal monitoring */ |
| |
| asm(XEN_EMULATE_PREFIX "cpuid" |
| : "=a" (*ax), |
| "=b" (*bx), |
| "=c" (*cx), |
| "=d" (*dx) |
| : "0" (*ax), "2" (*cx)); |
| *dx &= maskedx; |
| } |
| |
| static void xen_set_debugreg(int reg, unsigned long val) |
| { |
| HYPERVISOR_set_debugreg(reg, val); |
| } |
| |
| static unsigned long xen_get_debugreg(int reg) |
| { |
| return HYPERVISOR_get_debugreg(reg); |
| } |
| |
| static unsigned long xen_save_fl(void) |
| { |
| struct vcpu_info *vcpu; |
| unsigned long flags; |
| |
| vcpu = x86_read_percpu(xen_vcpu); |
| |
| /* flag has opposite sense of mask */ |
| flags = !vcpu->evtchn_upcall_mask; |
| |
| /* convert to IF type flag |
| -0 -> 0x00000000 |
| -1 -> 0xffffffff |
| */ |
| return (-flags) & X86_EFLAGS_IF; |
| } |
| |
| static void xen_restore_fl(unsigned long flags) |
| { |
| struct vcpu_info *vcpu; |
| |
| /* convert from IF type flag */ |
| flags = !(flags & X86_EFLAGS_IF); |
| |
| /* There's a one instruction preempt window here. We need to |
| make sure we're don't switch CPUs between getting the vcpu |
| pointer and updating the mask. */ |
| preempt_disable(); |
| vcpu = x86_read_percpu(xen_vcpu); |
| vcpu->evtchn_upcall_mask = flags; |
| preempt_enable_no_resched(); |
| |
| /* Doesn't matter if we get preempted here, because any |
| pending event will get dealt with anyway. */ |
| |
| if (flags == 0) { |
| preempt_check_resched(); |
| barrier(); /* unmask then check (avoid races) */ |
| if (unlikely(vcpu->evtchn_upcall_pending)) |
| force_evtchn_callback(); |
| } |
| } |
| |
| static void xen_irq_disable(void) |
| { |
| /* There's a one instruction preempt window here. We need to |
| make sure we're don't switch CPUs between getting the vcpu |
| pointer and updating the mask. */ |
| preempt_disable(); |
| x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1; |
| preempt_enable_no_resched(); |
| } |
| |
| static void xen_irq_enable(void) |
| { |
| struct vcpu_info *vcpu; |
| |
| /* There's a one instruction preempt window here. We need to |
| make sure we're don't switch CPUs between getting the vcpu |
| pointer and updating the mask. */ |
| preempt_disable(); |
| vcpu = x86_read_percpu(xen_vcpu); |
| vcpu->evtchn_upcall_mask = 0; |
| preempt_enable_no_resched(); |
| |
| /* Doesn't matter if we get preempted here, because any |
| pending event will get dealt with anyway. */ |
| |
| barrier(); /* unmask then check (avoid races) */ |
| if (unlikely(vcpu->evtchn_upcall_pending)) |
| force_evtchn_callback(); |
| } |
| |
| static void xen_safe_halt(void) |
| { |
| /* Blocking includes an implicit local_irq_enable(). */ |
| if (HYPERVISOR_sched_op(SCHEDOP_block, 0) != 0) |
| BUG(); |
| } |
| |
| static void xen_halt(void) |
| { |
| if (irqs_disabled()) |
| HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); |
| else |
| xen_safe_halt(); |
| } |
| |
| static void xen_leave_lazy(void) |
| { |
| paravirt_leave_lazy(paravirt_get_lazy_mode()); |
| xen_mc_flush(); |
| } |
| |
| static unsigned long xen_store_tr(void) |
| { |
| return 0; |
| } |
| |
| static void xen_set_ldt(const void *addr, unsigned entries) |
| { |
| struct mmuext_op *op; |
| struct multicall_space mcs = xen_mc_entry(sizeof(*op)); |
| |
| op = mcs.args; |
| op->cmd = MMUEXT_SET_LDT; |
| op->arg1.linear_addr = (unsigned long)addr; |
| op->arg2.nr_ents = entries; |
| |
| MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); |
| |
| xen_mc_issue(PARAVIRT_LAZY_CPU); |
| } |
| |
| static void xen_load_gdt(const struct desc_ptr *dtr) |
| { |
| unsigned long *frames; |
| unsigned long va = dtr->address; |
| unsigned int size = dtr->size + 1; |
| unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE; |
| int f; |
| struct multicall_space mcs; |
| |
| /* A GDT can be up to 64k in size, which corresponds to 8192 |
| 8-byte entries, or 16 4k pages.. */ |
| |
| BUG_ON(size > 65536); |
| BUG_ON(va & ~PAGE_MASK); |
| |
| mcs = xen_mc_entry(sizeof(*frames) * pages); |
| frames = mcs.args; |
| |
| for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) { |
| frames[f] = virt_to_mfn(va); |
| make_lowmem_page_readonly((void *)va); |
| } |
| |
| MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct)); |
| |
| xen_mc_issue(PARAVIRT_LAZY_CPU); |
| } |
| |
| static void load_TLS_descriptor(struct thread_struct *t, |
| unsigned int cpu, unsigned int i) |
| { |
| struct desc_struct *gdt = get_cpu_gdt_table(cpu); |
| xmaddr_t maddr = virt_to_machine(&gdt[GDT_ENTRY_TLS_MIN+i]); |
| struct multicall_space mc = __xen_mc_entry(0); |
| |
| MULTI_update_descriptor(mc.mc, maddr.maddr, t->tls_array[i]); |
| } |
| |
| static void xen_load_tls(struct thread_struct *t, unsigned int cpu) |
| { |
| xen_mc_batch(); |
| |
| load_TLS_descriptor(t, cpu, 0); |
| load_TLS_descriptor(t, cpu, 1); |
| load_TLS_descriptor(t, cpu, 2); |
| |
| xen_mc_issue(PARAVIRT_LAZY_CPU); |
| |
| /* |
| * XXX sleazy hack: If we're being called in a lazy-cpu zone, |
| * it means we're in a context switch, and %gs has just been |
| * saved. This means we can zero it out to prevent faults on |
| * exit from the hypervisor if the next process has no %gs. |
| * Either way, it has been saved, and the new value will get |
| * loaded properly. This will go away as soon as Xen has been |
| * modified to not save/restore %gs for normal hypercalls. |
| */ |
| if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) |
| loadsegment(gs, 0); |
| } |
| |
| static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum, |
| const void *ptr) |
| { |
| unsigned long lp = (unsigned long)&dt[entrynum]; |
| xmaddr_t mach_lp = virt_to_machine(lp); |
| u64 entry = *(u64 *)ptr; |
| |
| preempt_disable(); |
| |
| xen_mc_flush(); |
| if (HYPERVISOR_update_descriptor(mach_lp.maddr, entry)) |
| BUG(); |
| |
| preempt_enable(); |
| } |
| |
| static int cvt_gate_to_trap(int vector, u32 low, u32 high, |
| struct trap_info *info) |
| { |
| u8 type, dpl; |
| |
| type = (high >> 8) & 0x1f; |
| dpl = (high >> 13) & 3; |
| |
| if (type != 0xf && type != 0xe) |
| return 0; |
| |
| info->vector = vector; |
| info->address = (high & 0xffff0000) | (low & 0x0000ffff); |
| info->cs = low >> 16; |
| info->flags = dpl; |
| /* interrupt gates clear IF */ |
| if (type == 0xe) |
| info->flags |= 4; |
| |
| return 1; |
| } |
| |
| /* Locations of each CPU's IDT */ |
| static DEFINE_PER_CPU(struct desc_ptr, idt_desc); |
| |
| /* Set an IDT entry. If the entry is part of the current IDT, then |
| also update Xen. */ |
| static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g) |
| { |
| unsigned long p = (unsigned long)&dt[entrynum]; |
| unsigned long start, end; |
| |
| preempt_disable(); |
| |
| start = __get_cpu_var(idt_desc).address; |
| end = start + __get_cpu_var(idt_desc).size + 1; |
| |
| xen_mc_flush(); |
| |
| native_write_idt_entry(dt, entrynum, g); |
| |
| if (p >= start && (p + 8) <= end) { |
| struct trap_info info[2]; |
| u32 *desc = (u32 *)g; |
| |
| info[1].address = 0; |
| |
| if (cvt_gate_to_trap(entrynum, desc[0], desc[1], &info[0])) |
| if (HYPERVISOR_set_trap_table(info)) |
| BUG(); |
| } |
| |
| preempt_enable(); |
| } |
| |
| static void xen_convert_trap_info(const struct desc_ptr *desc, |
| struct trap_info *traps) |
| { |
| unsigned in, out, count; |
| |
| count = (desc->size+1) / 8; |
| BUG_ON(count > 256); |
| |
| for (in = out = 0; in < count; in++) { |
| const u32 *entry = (u32 *)(desc->address + in * 8); |
| |
| if (cvt_gate_to_trap(in, entry[0], entry[1], &traps[out])) |
| out++; |
| } |
| traps[out].address = 0; |
| } |
| |
| void xen_copy_trap_info(struct trap_info *traps) |
| { |
| const struct desc_ptr *desc = &__get_cpu_var(idt_desc); |
| |
| xen_convert_trap_info(desc, traps); |
| } |
| |
| /* Load a new IDT into Xen. In principle this can be per-CPU, so we |
| hold a spinlock to protect the static traps[] array (static because |
| it avoids allocation, and saves stack space). */ |
| static void xen_load_idt(const struct desc_ptr *desc) |
| { |
| static DEFINE_SPINLOCK(lock); |
| static struct trap_info traps[257]; |
| |
| spin_lock(&lock); |
| |
| __get_cpu_var(idt_desc) = *desc; |
| |
| xen_convert_trap_info(desc, traps); |
| |
| xen_mc_flush(); |
| if (HYPERVISOR_set_trap_table(traps)) |
| BUG(); |
| |
| spin_unlock(&lock); |
| } |
| |
| /* Write a GDT descriptor entry. Ignore LDT descriptors, since |
| they're handled differently. */ |
| static void xen_write_gdt_entry(struct desc_struct *dt, int entry, |
| const void *desc, int type) |
| { |
| preempt_disable(); |
| |
| switch (type) { |
| case DESC_LDT: |
| case DESC_TSS: |
| /* ignore */ |
| break; |
| |
| default: { |
| xmaddr_t maddr = virt_to_machine(&dt[entry]); |
| |
| xen_mc_flush(); |
| if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc)) |
| BUG(); |
| } |
| |
| } |
| |
| preempt_enable(); |
| } |
| |
| static void xen_load_sp0(struct tss_struct *tss, |
| struct thread_struct *thread) |
| { |
| struct multicall_space mcs = xen_mc_entry(0); |
| MULTI_stack_switch(mcs.mc, __KERNEL_DS, thread->sp0); |
| xen_mc_issue(PARAVIRT_LAZY_CPU); |
| } |
| |
| static void xen_set_iopl_mask(unsigned mask) |
| { |
| struct physdev_set_iopl set_iopl; |
| |
| /* Force the change at ring 0. */ |
| set_iopl.iopl = (mask == 0) ? 1 : (mask >> 12) & 3; |
| HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); |
| } |
| |
| static void xen_io_delay(void) |
| { |
| } |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| static u32 xen_apic_read(unsigned long reg) |
| { |
| return 0; |
| } |
| |
| static void xen_apic_write(unsigned long reg, u32 val) |
| { |
| /* Warn to see if there's any stray references */ |
| WARN_ON(1); |
| } |
| #endif |
| |
| static void xen_flush_tlb(void) |
| { |
| struct mmuext_op *op; |
| struct multicall_space mcs; |
| |
| preempt_disable(); |
| |
| mcs = xen_mc_entry(sizeof(*op)); |
| |
| op = mcs.args; |
| op->cmd = MMUEXT_TLB_FLUSH_LOCAL; |
| MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); |
| |
| xen_mc_issue(PARAVIRT_LAZY_MMU); |
| |
| preempt_enable(); |
| } |
| |
| static void xen_flush_tlb_single(unsigned long addr) |
| { |
| struct mmuext_op *op; |
| struct multicall_space mcs; |
| |
| preempt_disable(); |
| |
| mcs = xen_mc_entry(sizeof(*op)); |
| op = mcs.args; |
| op->cmd = MMUEXT_INVLPG_LOCAL; |
| op->arg1.linear_addr = addr & PAGE_MASK; |
| MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); |
| |
| xen_mc_issue(PARAVIRT_LAZY_MMU); |
| |
| preempt_enable(); |
| } |
| |
| static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm, |
| unsigned long va) |
| { |
| struct { |
| struct mmuext_op op; |
| cpumask_t mask; |
| } *args; |
| cpumask_t cpumask = *cpus; |
| struct multicall_space mcs; |
| |
| /* |
| * A couple of (to be removed) sanity checks: |
| * |
| * - current CPU must not be in mask |
| * - mask must exist :) |
| */ |
| BUG_ON(cpus_empty(cpumask)); |
| BUG_ON(cpu_isset(smp_processor_id(), cpumask)); |
| BUG_ON(!mm); |
| |
| /* If a CPU which we ran on has gone down, OK. */ |
| cpus_and(cpumask, cpumask, cpu_online_map); |
| if (cpus_empty(cpumask)) |
| return; |
| |
| mcs = xen_mc_entry(sizeof(*args)); |
| args = mcs.args; |
| args->mask = cpumask; |
| args->op.arg2.vcpumask = &args->mask; |
| |
| if (va == TLB_FLUSH_ALL) { |
| args->op.cmd = MMUEXT_TLB_FLUSH_MULTI; |
| } else { |
| args->op.cmd = MMUEXT_INVLPG_MULTI; |
| args->op.arg1.linear_addr = va; |
| } |
| |
| MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF); |
| |
| xen_mc_issue(PARAVIRT_LAZY_MMU); |
| } |
| |
| static void xen_write_cr2(unsigned long cr2) |
| { |
| x86_read_percpu(xen_vcpu)->arch.cr2 = cr2; |
| } |
| |
| static unsigned long xen_read_cr2(void) |
| { |
| return x86_read_percpu(xen_vcpu)->arch.cr2; |
| } |
| |
| static unsigned long xen_read_cr2_direct(void) |
| { |
| return x86_read_percpu(xen_vcpu_info.arch.cr2); |
| } |
| |
| static void xen_write_cr4(unsigned long cr4) |
| { |
| /* Just ignore cr4 changes; Xen doesn't allow us to do |
| anything anyway. */ |
| } |
| |
| static unsigned long xen_read_cr3(void) |
| { |
| return x86_read_percpu(xen_cr3); |
| } |
| |
| static void set_current_cr3(void *v) |
| { |
| x86_write_percpu(xen_current_cr3, (unsigned long)v); |
| } |
| |
| static void xen_write_cr3(unsigned long cr3) |
| { |
| struct mmuext_op *op; |
| struct multicall_space mcs; |
| unsigned long mfn = pfn_to_mfn(PFN_DOWN(cr3)); |
| |
| BUG_ON(preemptible()); |
| |
| mcs = xen_mc_entry(sizeof(*op)); /* disables interrupts */ |
| |
| /* Update while interrupts are disabled, so its atomic with |
| respect to ipis */ |
| x86_write_percpu(xen_cr3, cr3); |
| |
| op = mcs.args; |
| op->cmd = MMUEXT_NEW_BASEPTR; |
| op->arg1.mfn = mfn; |
| |
| MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); |
| |
| /* Update xen_update_cr3 once the batch has actually |
| been submitted. */ |
| xen_mc_callback(set_current_cr3, (void *)cr3); |
| |
| xen_mc_issue(PARAVIRT_LAZY_CPU); /* interrupts restored */ |
| } |
| |
| /* Early in boot, while setting up the initial pagetable, assume |
| everything is pinned. */ |
| static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn) |
| { |
| #ifdef CONFIG_FLATMEM |
| BUG_ON(mem_map); /* should only be used early */ |
| #endif |
| make_lowmem_page_readonly(__va(PFN_PHYS(pfn))); |
| } |
| |
| /* Early release_pte assumes that all pts are pinned, since there's |
| only init_mm and anything attached to that is pinned. */ |
| static void xen_release_pte_init(u32 pfn) |
| { |
| make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); |
| } |
| |
| static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn) |
| { |
| struct mmuext_op op; |
| op.cmd = cmd; |
| op.arg1.mfn = pfn_to_mfn(pfn); |
| if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF)) |
| BUG(); |
| } |
| |
| /* This needs to make sure the new pte page is pinned iff its being |
| attached to a pinned pagetable. */ |
| static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level) |
| { |
| struct page *page = pfn_to_page(pfn); |
| |
| if (PagePinned(virt_to_page(mm->pgd))) { |
| SetPagePinned(page); |
| |
| if (!PageHighMem(page)) { |
| make_lowmem_page_readonly(__va(PFN_PHYS(pfn))); |
| if (level == PT_PTE) |
| pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn); |
| } else |
| /* make sure there are no stray mappings of |
| this page */ |
| kmap_flush_unused(); |
| } |
| } |
| |
| static void xen_alloc_pte(struct mm_struct *mm, u32 pfn) |
| { |
| xen_alloc_ptpage(mm, pfn, PT_PTE); |
| } |
| |
| static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn) |
| { |
| xen_alloc_ptpage(mm, pfn, PT_PMD); |
| } |
| |
| /* This should never happen until we're OK to use struct page */ |
| static void xen_release_ptpage(u32 pfn, unsigned level) |
| { |
| struct page *page = pfn_to_page(pfn); |
| |
| if (PagePinned(page)) { |
| if (!PageHighMem(page)) { |
| if (level == PT_PTE) |
| pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn); |
| make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); |
| } |
| ClearPagePinned(page); |
| } |
| } |
| |
| static void xen_release_pte(u32 pfn) |
| { |
| xen_release_ptpage(pfn, PT_PTE); |
| } |
| |
| static void xen_release_pmd(u32 pfn) |
| { |
| xen_release_ptpage(pfn, PT_PMD); |
| } |
| |
| #ifdef CONFIG_HIGHPTE |
| static void *xen_kmap_atomic_pte(struct page *page, enum km_type type) |
| { |
| pgprot_t prot = PAGE_KERNEL; |
| |
| if (PagePinned(page)) |
| prot = PAGE_KERNEL_RO; |
| |
| if (0 && PageHighMem(page)) |
| printk("mapping highpte %lx type %d prot %s\n", |
| page_to_pfn(page), type, |
| (unsigned long)pgprot_val(prot) & _PAGE_RW ? "WRITE" : "READ"); |
| |
| return kmap_atomic_prot(page, type, prot); |
| } |
| #endif |
| |
| static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte) |
| { |
| /* If there's an existing pte, then don't allow _PAGE_RW to be set */ |
| if (pte_val_ma(*ptep) & _PAGE_PRESENT) |
| pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) & |
| pte_val_ma(pte)); |
| |
| return pte; |
| } |
| |
| /* Init-time set_pte while constructing initial pagetables, which |
| doesn't allow RO pagetable pages to be remapped RW */ |
| static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) |
| { |
| pte = mask_rw_pte(ptep, pte); |
| |
| xen_set_pte(ptep, pte); |
| } |
| |
| static __init void xen_pagetable_setup_start(pgd_t *base) |
| { |
| pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base; |
| |
| /* special set_pte for pagetable initialization */ |
| pv_mmu_ops.set_pte = xen_set_pte_init; |
| |
| init_mm.pgd = base; |
| /* |
| * copy top-level of Xen-supplied pagetable into place. For |
| * !PAE we can use this as-is, but for PAE it is a stand-in |
| * while we copy the pmd pages. |
| */ |
| memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t)); |
| |
| if (PTRS_PER_PMD > 1) { |
| int i; |
| /* |
| * For PAE, need to allocate new pmds, rather than |
| * share Xen's, since Xen doesn't like pmd's being |
| * shared between address spaces. |
| */ |
| for (i = 0; i < PTRS_PER_PGD; i++) { |
| if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { |
| pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); |
| |
| memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), |
| PAGE_SIZE); |
| |
| make_lowmem_page_readonly(pmd); |
| |
| set_pgd(&base[i], __pgd(1 + __pa(pmd))); |
| } else |
| pgd_clear(&base[i]); |
| } |
| } |
| |
| /* make sure zero_page is mapped RO so we can use it in pagetables */ |
| make_lowmem_page_readonly(empty_zero_page); |
| make_lowmem_page_readonly(base); |
| /* |
| * Switch to new pagetable. This is done before |
| * pagetable_init has done anything so that the new pages |
| * added to the table can be prepared properly for Xen. |
| */ |
| xen_write_cr3(__pa(base)); |
| |
| /* Unpin initial Xen pagetable */ |
| pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, |
| PFN_DOWN(__pa(xen_start_info->pt_base))); |
| } |
| |
| static __init void setup_shared_info(void) |
| { |
| if (!xen_feature(XENFEAT_auto_translated_physmap)) { |
| unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP); |
| |
| /* |
| * Create a mapping for the shared info page. |
| * Should be set_fixmap(), but shared_info is a machine |
| * address with no corresponding pseudo-phys address. |
| */ |
| set_pte_mfn(addr, |
| PFN_DOWN(xen_start_info->shared_info), |
| PAGE_KERNEL); |
| |
| HYPERVISOR_shared_info = (struct shared_info *)addr; |
| } else |
| HYPERVISOR_shared_info = |
| (struct shared_info *)__va(xen_start_info->shared_info); |
| |
| #ifndef CONFIG_SMP |
| /* In UP this is as good a place as any to set up shared info */ |
| xen_setup_vcpu_info_placement(); |
| #endif |
| } |
| |
| static __init void xen_pagetable_setup_done(pgd_t *base) |
| { |
| /* This will work as long as patching hasn't happened yet |
| (which it hasn't) */ |
| pv_mmu_ops.alloc_pte = xen_alloc_pte; |
| pv_mmu_ops.alloc_pmd = xen_alloc_pmd; |
| pv_mmu_ops.release_pte = xen_release_pte; |
| pv_mmu_ops.release_pmd = xen_release_pmd; |
| pv_mmu_ops.set_pte = xen_set_pte; |
| |
| setup_shared_info(); |
| |
| /* Actually pin the pagetable down, but we can't set PG_pinned |
| yet because the page structures don't exist yet. */ |
| { |
| unsigned level; |
| |
| #ifdef CONFIG_X86_PAE |
| level = MMUEXT_PIN_L3_TABLE; |
| #else |
| level = MMUEXT_PIN_L2_TABLE; |
| #endif |
| |
| pin_pagetable_pfn(level, PFN_DOWN(__pa(base))); |
| } |
| } |
| |
| /* This is called once we have the cpu_possible_map */ |
| void __init xen_setup_vcpu_info_placement(void) |
| { |
| int cpu; |
| |
| for_each_possible_cpu(cpu) |
| xen_vcpu_setup(cpu); |
| |
| /* xen_vcpu_setup managed to place the vcpu_info within the |
| percpu area for all cpus, so make use of it */ |
| if (have_vcpu_info_placement) { |
| printk(KERN_INFO "Xen: using vcpu_info placement\n"); |
| |
| pv_irq_ops.save_fl = xen_save_fl_direct; |
| pv_irq_ops.restore_fl = xen_restore_fl_direct; |
| pv_irq_ops.irq_disable = xen_irq_disable_direct; |
| pv_irq_ops.irq_enable = xen_irq_enable_direct; |
| pv_mmu_ops.read_cr2 = xen_read_cr2_direct; |
| } |
| } |
| |
| static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf, |
| unsigned long addr, unsigned len) |
| { |
| char *start, *end, *reloc; |
| unsigned ret; |
| |
| start = end = reloc = NULL; |
| |
| #define SITE(op, x) \ |
| case PARAVIRT_PATCH(op.x): \ |
| if (have_vcpu_info_placement) { \ |
| start = (char *)xen_##x##_direct; \ |
| end = xen_##x##_direct_end; \ |
| reloc = xen_##x##_direct_reloc; \ |
| } \ |
| goto patch_site |
| |
| switch (type) { |
| SITE(pv_irq_ops, irq_enable); |
| SITE(pv_irq_ops, irq_disable); |
| SITE(pv_irq_ops, save_fl); |
| SITE(pv_irq_ops, restore_fl); |
| #undef SITE |
| |
| patch_site: |
| if (start == NULL || (end-start) > len) |
| goto default_patch; |
| |
| ret = paravirt_patch_insns(insnbuf, len, start, end); |
| |
| /* Note: because reloc is assigned from something that |
| appears to be an array, gcc assumes it's non-null, |
| but doesn't know its relationship with start and |
| end. */ |
| if (reloc > start && reloc < end) { |
| int reloc_off = reloc - start; |
| long *relocp = (long *)(insnbuf + reloc_off); |
| long delta = start - (char *)addr; |
| |
| *relocp += delta; |
| } |
| break; |
| |
| default_patch: |
| default: |
| ret = paravirt_patch_default(type, clobbers, insnbuf, |
| addr, len); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static const struct pv_info xen_info __initdata = { |
| .paravirt_enabled = 1, |
| .shared_kernel_pmd = 0, |
| |
| .name = "Xen", |
| }; |
| |
| static const struct pv_init_ops xen_init_ops __initdata = { |
| .patch = xen_patch, |
| |
| .banner = xen_banner, |
| .memory_setup = xen_memory_setup, |
| .arch_setup = xen_arch_setup, |
| .post_allocator_init = xen_mark_init_mm_pinned, |
| }; |
| |
| static const struct pv_time_ops xen_time_ops __initdata = { |
| .time_init = xen_time_init, |
| |
| .set_wallclock = xen_set_wallclock, |
| .get_wallclock = xen_get_wallclock, |
| .get_cpu_khz = xen_cpu_khz, |
| .sched_clock = xen_sched_clock, |
| }; |
| |
| static const struct pv_cpu_ops xen_cpu_ops __initdata = { |
| .cpuid = xen_cpuid, |
| |
| .set_debugreg = xen_set_debugreg, |
| .get_debugreg = xen_get_debugreg, |
| |
| .clts = native_clts, |
| |
| .read_cr0 = native_read_cr0, |
| .write_cr0 = native_write_cr0, |
| |
| .read_cr4 = native_read_cr4, |
| .read_cr4_safe = native_read_cr4_safe, |
| .write_cr4 = xen_write_cr4, |
| |
| .wbinvd = native_wbinvd, |
| |
| .read_msr = native_read_msr_safe, |
| .write_msr = native_write_msr_safe, |
| .read_tsc = native_read_tsc, |
| .read_pmc = native_read_pmc, |
| |
| .iret = xen_iret, |
| .irq_enable_syscall_ret = xen_sysexit, |
| |
| .load_tr_desc = paravirt_nop, |
| .set_ldt = xen_set_ldt, |
| .load_gdt = xen_load_gdt, |
| .load_idt = xen_load_idt, |
| .load_tls = xen_load_tls, |
| |
| .store_gdt = native_store_gdt, |
| .store_idt = native_store_idt, |
| .store_tr = xen_store_tr, |
| |
| .write_ldt_entry = xen_write_ldt_entry, |
| .write_gdt_entry = xen_write_gdt_entry, |
| .write_idt_entry = xen_write_idt_entry, |
| .load_sp0 = xen_load_sp0, |
| |
| .set_iopl_mask = xen_set_iopl_mask, |
| .io_delay = xen_io_delay, |
| |
| .lazy_mode = { |
| .enter = paravirt_enter_lazy_cpu, |
| .leave = xen_leave_lazy, |
| }, |
| }; |
| |
| static const struct pv_irq_ops xen_irq_ops __initdata = { |
| .init_IRQ = xen_init_IRQ, |
| .save_fl = xen_save_fl, |
| .restore_fl = xen_restore_fl, |
| .irq_disable = xen_irq_disable, |
| .irq_enable = xen_irq_enable, |
| .safe_halt = xen_safe_halt, |
| .halt = xen_halt, |
| }; |
| |
| static const struct pv_apic_ops xen_apic_ops __initdata = { |
| #ifdef CONFIG_X86_LOCAL_APIC |
| .apic_write = xen_apic_write, |
| .apic_write_atomic = xen_apic_write, |
| .apic_read = xen_apic_read, |
| .setup_boot_clock = paravirt_nop, |
| .setup_secondary_clock = paravirt_nop, |
| .startup_ipi_hook = paravirt_nop, |
| #endif |
| }; |
| |
| static const struct pv_mmu_ops xen_mmu_ops __initdata = { |
| .pagetable_setup_start = xen_pagetable_setup_start, |
| .pagetable_setup_done = xen_pagetable_setup_done, |
| |
| .read_cr2 = xen_read_cr2, |
| .write_cr2 = xen_write_cr2, |
| |
| .read_cr3 = xen_read_cr3, |
| .write_cr3 = xen_write_cr3, |
| |
| .flush_tlb_user = xen_flush_tlb, |
| .flush_tlb_kernel = xen_flush_tlb, |
| .flush_tlb_single = xen_flush_tlb_single, |
| .flush_tlb_others = xen_flush_tlb_others, |
| |
| .pte_update = paravirt_nop, |
| .pte_update_defer = paravirt_nop, |
| |
| .alloc_pte = xen_alloc_pte_init, |
| .release_pte = xen_release_pte_init, |
| .alloc_pmd = xen_alloc_pte_init, |
| .alloc_pmd_clone = paravirt_nop, |
| .release_pmd = xen_release_pte_init, |
| |
| #ifdef CONFIG_HIGHPTE |
| .kmap_atomic_pte = xen_kmap_atomic_pte, |
| #endif |
| |
| .set_pte = NULL, /* see xen_pagetable_setup_* */ |
| .set_pte_at = xen_set_pte_at, |
| .set_pmd = xen_set_pmd, |
| |
| .pte_val = xen_pte_val, |
| .pgd_val = xen_pgd_val, |
| |
| .make_pte = xen_make_pte, |
| .make_pgd = xen_make_pgd, |
| |
| #ifdef CONFIG_X86_PAE |
| .set_pte_atomic = xen_set_pte_atomic, |
| .set_pte_present = xen_set_pte_at, |
| .set_pud = xen_set_pud, |
| .pte_clear = xen_pte_clear, |
| .pmd_clear = xen_pmd_clear, |
| |
| .make_pmd = xen_make_pmd, |
| .pmd_val = xen_pmd_val, |
| #endif /* PAE */ |
| |
| .activate_mm = xen_activate_mm, |
| .dup_mmap = xen_dup_mmap, |
| .exit_mmap = xen_exit_mmap, |
| |
| .lazy_mode = { |
| .enter = paravirt_enter_lazy_mmu, |
| .leave = xen_leave_lazy, |
| }, |
| }; |
| |
| #ifdef CONFIG_SMP |
| static const struct smp_ops xen_smp_ops __initdata = { |
| .smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu, |
| .smp_prepare_cpus = xen_smp_prepare_cpus, |
| .cpu_up = xen_cpu_up, |
| .smp_cpus_done = xen_smp_cpus_done, |
| |
| .smp_send_stop = xen_smp_send_stop, |
| .smp_send_reschedule = xen_smp_send_reschedule, |
| .smp_call_function_mask = xen_smp_call_function_mask, |
| }; |
| #endif /* CONFIG_SMP */ |
| |
| static void xen_reboot(int reason) |
| { |
| #ifdef CONFIG_SMP |
| smp_send_stop(); |
| #endif |
| |
| if (HYPERVISOR_sched_op(SCHEDOP_shutdown, reason)) |
| BUG(); |
| } |
| |
| static void xen_restart(char *msg) |
| { |
| xen_reboot(SHUTDOWN_reboot); |
| } |
| |
| static void xen_emergency_restart(void) |
| { |
| xen_reboot(SHUTDOWN_reboot); |
| } |
| |
| static void xen_machine_halt(void) |
| { |
| xen_reboot(SHUTDOWN_poweroff); |
| } |
| |
| static void xen_crash_shutdown(struct pt_regs *regs) |
| { |
| xen_reboot(SHUTDOWN_crash); |
| } |
| |
| static const struct machine_ops __initdata xen_machine_ops = { |
| .restart = xen_restart, |
| .halt = xen_machine_halt, |
| .power_off = xen_machine_halt, |
| .shutdown = xen_machine_halt, |
| .crash_shutdown = xen_crash_shutdown, |
| .emergency_restart = xen_emergency_restart, |
| }; |
| |
| |
| static void __init xen_reserve_top(void) |
| { |
| unsigned long top = HYPERVISOR_VIRT_START; |
| struct xen_platform_parameters pp; |
| |
| if (HYPERVISOR_xen_version(XENVER_platform_parameters, &pp) == 0) |
| top = pp.virt_start; |
| |
| reserve_top_address(-top + 2 * PAGE_SIZE); |
| } |
| |
| /* First C function to be called on Xen boot */ |
| asmlinkage void __init xen_start_kernel(void) |
| { |
| pgd_t *pgd; |
| |
| if (!xen_start_info) |
| return; |
| |
| BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0); |
| |
| /* Install Xen paravirt ops */ |
| pv_info = xen_info; |
| pv_init_ops = xen_init_ops; |
| pv_time_ops = xen_time_ops; |
| pv_cpu_ops = xen_cpu_ops; |
| pv_irq_ops = xen_irq_ops; |
| pv_apic_ops = xen_apic_ops; |
| pv_mmu_ops = xen_mmu_ops; |
| |
| machine_ops = xen_machine_ops; |
| |
| #ifdef CONFIG_SMP |
| smp_ops = xen_smp_ops; |
| #endif |
| |
| xen_setup_features(); |
| |
| /* Get mfn list */ |
| if (!xen_feature(XENFEAT_auto_translated_physmap)) |
| phys_to_machine_mapping = (unsigned long *)xen_start_info->mfn_list; |
| |
| pgd = (pgd_t *)xen_start_info->pt_base; |
| |
| init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE; |
| |
| init_mm.pgd = pgd; /* use the Xen pagetables to start */ |
| |
| /* keep using Xen gdt for now; no urgent need to change it */ |
| |
| x86_write_percpu(xen_cr3, __pa(pgd)); |
| x86_write_percpu(xen_current_cr3, __pa(pgd)); |
| |
| /* Don't do the full vcpu_info placement stuff until we have a |
| possible map and a non-dummy shared_info. */ |
| per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; |
| |
| pv_info.kernel_rpl = 1; |
| if (xen_feature(XENFEAT_supervisor_mode_kernel)) |
| pv_info.kernel_rpl = 0; |
| |
| /* set the limit of our address space */ |
| xen_reserve_top(); |
| |
| /* set up basic CPUID stuff */ |
| cpu_detect(&new_cpu_data); |
| new_cpu_data.hard_math = 1; |
| new_cpu_data.x86_capability[0] = cpuid_edx(1); |
| |
| /* Poke various useful things into boot_params */ |
| boot_params.hdr.type_of_loader = (9 << 4) | 0; |
| boot_params.hdr.ramdisk_image = xen_start_info->mod_start |
| ? __pa(xen_start_info->mod_start) : 0; |
| boot_params.hdr.ramdisk_size = xen_start_info->mod_len; |
| |
| if (!is_initial_xendomain()) |
| add_preferred_console("hvc", 0, NULL); |
| |
| /* Start the world */ |
| start_kernel(); |
| } |