Blackfin: split optimization settings more
We need to place icache flush funcs into L1 inst sram to work around a
hardware anomaly. But this currently breaks SMP support as the L1 inst
sram is per-core and cannot be called directly. So in preparation for
making that work, split the two options.
Further, split out the SMP depend so that we can allow some for SMP.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index c09577d..0f34ec5 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -690,13 +690,13 @@
menu "Blackfin Kernel Optimizations"
- depends on !SMP
comment "Memory Optimizations"
config I_ENTRY_L1
bool "Locate interrupt entry code in L1 Memory"
default y
+ depends on !SMP
help
If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked
into L1 instruction memory. (less latency)
@@ -704,6 +704,7 @@
config EXCPT_IRQ_SYSC_L1
bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the entire ASM lowlevel exception and interrupt entry code
(STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
@@ -712,6 +713,7 @@
config DO_IRQ_L1
bool "Locate frequently called do_irq dispatcher function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the frequently called do_irq dispatcher function is linked
into L1 instruction memory. (less latency)
@@ -719,6 +721,7 @@
config CORE_TIMER_IRQ_L1
bool "Locate frequently called timer_interrupt() function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the frequently called timer_interrupt() function is linked
into L1 instruction memory. (less latency)
@@ -726,6 +729,7 @@
config IDLE_L1
bool "Locate frequently idle function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the frequently called idle function is linked
into L1 instruction memory. (less latency)
@@ -733,6 +737,7 @@
config SCHEDULE_L1
bool "Locate kernel schedule function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the frequently called kernel schedule is linked
into L1 instruction memory. (less latency)
@@ -740,6 +745,7 @@
config ARITHMETIC_OPS_L1
bool "Locate kernel owned arithmetic functions in L1 Memory"
default y
+ depends on !SMP
help
If enabled, arithmetic functions are linked
into L1 instruction memory. (less latency)
@@ -747,6 +753,7 @@
config ACCESS_OK_L1
bool "Locate access_ok function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the access_ok function is linked
into L1 instruction memory. (less latency)
@@ -754,6 +761,7 @@
config MEMSET_L1
bool "Locate memset function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the memset function is linked
into L1 instruction memory. (less latency)
@@ -761,6 +769,7 @@
config MEMCPY_L1
bool "Locate memcpy function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the memcpy function is linked
into L1 instruction memory. (less latency)
@@ -768,6 +777,7 @@
config STRCMP_L1
bool "locate strcmp function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the strcmp function is linked
into L1 instruction memory (less latency).
@@ -775,6 +785,7 @@
config STRNCMP_L1
bool "locate strncmp function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the strncmp function is linked
into L1 instruction memory (less latency).
@@ -782,6 +793,7 @@
config STRCPY_L1
bool "locate strcpy function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the strcpy function is linked
into L1 instruction memory (less latency).
@@ -789,6 +801,7 @@
config STRNCPY_L1
bool "locate strncpy function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, the strncpy function is linked
into L1 instruction memory (less latency).
@@ -796,6 +809,7 @@
config SYS_BFIN_SPINLOCK_L1
bool "Locate sys_bfin_spinlock function in L1 Memory"
default y
+ depends on !SMP
help
If enabled, sys_bfin_spinlock function is linked
into L1 instruction memory. (less latency)
@@ -803,6 +817,7 @@
config IP_CHECKSUM_L1
bool "Locate IP Checksum function in L1 Memory"
default n
+ depends on !SMP
help
If enabled, the IP Checksum function is linked
into L1 instruction memory. (less latency)
@@ -811,7 +826,7 @@
bool "Locate cacheline_aligned data to L1 Data Memory"
default y if !BF54x
default n if BF54x
- depends on !BF531
+ depends on !SMP && !BF531
help
If enabled, cacheline_aligned data is linked
into L1 data memory. (less latency)
@@ -819,7 +834,7 @@
config SYSCALL_TAB_L1
bool "Locate Syscall Table L1 Data Memory"
default n
- depends on !BF531
+ depends on !SMP && !BF531
help
If enabled, the Syscall LUT is linked
into L1 data memory. (less latency)
@@ -827,16 +842,17 @@
config CPLB_SWITCH_TAB_L1
bool "Locate CPLB Switch Tables L1 Data Memory"
default n
- depends on !BF531
+ depends on !SMP && !BF531
help
If enabled, the CPLB Switch Tables are linked
into L1 data memory. (less latency)
-config CACHE_FLUSH_L1
- bool "Locate cache flush funcs in L1 Inst Memory"
+config ICACHE_FLUSH_L1
+ bool "Locate icache flush funcs in L1 Inst Memory"
default y
+ depends on !SMP
help
- If enabled, the Blackfin cache flushing functions are linked
+ If enabled, the Blackfin icache flushing functions are linked
into L1 instruction memory.
Note that this might be required to address anomalies, but
@@ -844,9 +860,18 @@
If you are using a processor affected by an anomaly, the build
system will double check for you and prevent it.
+config DCACHE_FLUSH_L1
+ bool "Locate dcache flush funcs in L1 Inst Memory"
+ default y
+ depends on !SMP
+ help
+ If enabled, the Blackfin dcache flushing functions are linked
+ into L1 instruction memory.
+
config APP_STACK_L1
bool "Support locating application stack in L1 Scratch Memory"
default y
+ depends on !SMP
help
If enabled the application stack can be located in L1
scratch memory (less latency).
@@ -856,7 +881,7 @@
config EXCEPTION_L1_SCRATCH
bool "Locate exception stack in L1 Scratch Memory"
default n
- depends on !APP_STACK_L1
+ depends on !SMP && !APP_STACK_L1
help
Whenever an exception occurs, use the L1 Scratch memory for
stack storage. You cannot place the stacks of FLAT binaries
@@ -868,6 +893,7 @@
config BFIN_INS_LOWOVERHEAD
bool "ins[bwl] low overhead, higher interrupt latency"
default y
+ depends on !SMP
help
Reads on the Blackfin are speculative. In Blackfin terms, this means
they can be interrupted at any time (even after they have been issued