Merge remote-tracking branch 'spi/topic/loop' into spi-next
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index c463d36..bf2b27f 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -394,7 +394,7 @@
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
- depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
+ depends on PLAT_SAMSUNG
select S3C64XX_DMA if ARCH_S3C64XX
help
SPI driver for Samsung S3C64XX and newer SoCs.
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index ae07c3a..508f51f 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -205,7 +205,6 @@
#endif
struct s3c64xx_spi_port_config *port_conf;
unsigned int port_id;
- unsigned long gpios[4];
bool cs_gpio;
};
@@ -559,25 +558,18 @@
static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
struct spi_device *spi)
{
- struct s3c64xx_spi_csinfo *cs;
-
if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */
if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
/* Deselect the last toggled device */
- cs = sdd->tgl_spi->controller_data;
- if (sdd->cs_gpio)
- gpio_set_value(cs->line,
+ if (spi->cs_gpio >= 0)
+ gpio_set_value(spi->cs_gpio,
spi->mode & SPI_CS_HIGH ? 0 : 1);
}
sdd->tgl_spi = NULL;
}
- cs = spi->controller_data;
- if (sdd->cs_gpio)
- gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
-
- /* Start the signals */
- writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ if (spi->cs_gpio >= 0)
+ gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 1 : 0);
}
static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
@@ -702,16 +694,11 @@
static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
struct spi_device *spi)
{
- struct s3c64xx_spi_csinfo *cs = spi->controller_data;
-
if (sdd->tgl_spi == spi)
sdd->tgl_spi = NULL;
- if (sdd->cs_gpio)
- gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
-
- /* Quiese the signals */
- writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ if (spi->cs_gpio >= 0)
+ gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
}
static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
@@ -862,16 +849,12 @@
}
}
-static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
- struct spi_message *msg)
+static int s3c64xx_spi_prepare_message(struct spi_master *master,
+ struct spi_message *msg)
{
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
struct spi_device *spi = msg->spi;
struct s3c64xx_spi_csinfo *cs = spi->controller_data;
- struct spi_transfer *xfer;
- int status = 0, cs_toggle = 0;
- u32 speed;
- u8 bpw;
/* If Master's(controller) state differs from that needed by Slave */
if (sdd->cur_speed != spi->max_speed_hz
@@ -887,107 +870,99 @@
if (s3c64xx_spi_map_mssg(sdd, msg)) {
dev_err(&spi->dev,
"Xfer: Unable to map message buffers!\n");
- status = -ENOMEM;
- goto out;
+ return -ENOMEM;
}
/* Configure feedback delay */
writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ return 0;
+}
- unsigned long flags;
- int use_dma;
+static int s3c64xx_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
+ int status;
+ u32 speed;
+ u8 bpw;
+ unsigned long flags;
+ int use_dma;
- INIT_COMPLETION(sdd->xfer_completion);
+ INIT_COMPLETION(sdd->xfer_completion);
- /* Only BPW and Speed may change across transfers */
- bpw = xfer->bits_per_word;
- speed = xfer->speed_hz ? : spi->max_speed_hz;
+ /* Only BPW and Speed may change across transfers */
+ bpw = xfer->bits_per_word;
+ speed = xfer->speed_hz ? : spi->max_speed_hz;
- if (xfer->len % (bpw / 8)) {
- dev_err(&spi->dev,
- "Xfer length(%u) not a multiple of word size(%u)\n",
- xfer->len, bpw / 8);
- status = -EIO;
- goto out;
+ if (xfer->len % (bpw / 8)) {
+ dev_err(&spi->dev,
+ "Xfer length(%u) not a multiple of word size(%u)\n",
+ xfer->len, bpw / 8);
+ return -EIO;
+ }
+
+ if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) {
+ sdd->cur_bpw = bpw;
+ sdd->cur_speed = speed;
+ s3c64xx_spi_config(sdd);
+ }
+
+ /* Polling method for xfers not bigger than FIFO capacity */
+ use_dma = 0;
+ if (!is_polling(sdd) &&
+ (sdd->rx_dma.ch && sdd->tx_dma.ch &&
+ (xfer->len > ((FIFO_LVL_MASK(sdd) >> 1) + 1))))
+ use_dma = 1;
+
+ spin_lock_irqsave(&sdd->lock, flags);
+
+ /* Pending only which is to be done */
+ sdd->state &= ~RXBUSY;
+ sdd->state &= ~TXBUSY;
+
+ enable_datapath(sdd, spi, xfer, use_dma);
+
+ /* Start the signals */
+ writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+
+ /* Start the signals */
+ writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+
+ spin_unlock_irqrestore(&sdd->lock, flags);
+
+ status = wait_for_xfer(sdd, xfer, use_dma);
+
+ if (status) {
+ dev_err(&spi->dev, "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
+ xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
+ (sdd->state & RXBUSY) ? 'f' : 'p',
+ (sdd->state & TXBUSY) ? 'f' : 'p',
+ xfer->len);
+
+ if (use_dma) {
+ if (xfer->tx_buf != NULL
+ && (sdd->state & TXBUSY))
+ s3c64xx_spi_dma_stop(sdd, &sdd->tx_dma);
+ if (xfer->rx_buf != NULL
+ && (sdd->state & RXBUSY))
+ s3c64xx_spi_dma_stop(sdd, &sdd->rx_dma);
}
-
- if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) {
- sdd->cur_bpw = bpw;
- sdd->cur_speed = speed;
- s3c64xx_spi_config(sdd);
- }
-
- /* Polling method for xfers not bigger than FIFO capacity */
- use_dma = 0;
- if (!is_polling(sdd) &&
- (sdd->rx_dma.ch && sdd->tx_dma.ch &&
- (xfer->len > ((FIFO_LVL_MASK(sdd) >> 1) + 1))))
- use_dma = 1;
-
- spin_lock_irqsave(&sdd->lock, flags);
-
- /* Pending only which is to be done */
- sdd->state &= ~RXBUSY;
- sdd->state &= ~TXBUSY;
-
- enable_datapath(sdd, spi, xfer, use_dma);
-
- /* Slave Select */
- enable_cs(sdd, spi);
-
- spin_unlock_irqrestore(&sdd->lock, flags);
-
- status = wait_for_xfer(sdd, xfer, use_dma);
-
- if (status) {
- dev_err(&spi->dev, "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
- xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
- (sdd->state & RXBUSY) ? 'f' : 'p',
- (sdd->state & TXBUSY) ? 'f' : 'p',
- xfer->len);
-
- if (use_dma) {
- if (xfer->tx_buf != NULL
- && (sdd->state & TXBUSY))
- s3c64xx_spi_dma_stop(sdd, &sdd->tx_dma);
- if (xfer->rx_buf != NULL
- && (sdd->state & RXBUSY))
- s3c64xx_spi_dma_stop(sdd, &sdd->rx_dma);
- }
-
- goto out;
- }
-
- if (xfer->delay_usecs)
- udelay(xfer->delay_usecs);
-
- if (xfer->cs_change) {
- /* Hint that the next mssg is gonna be
- for the same device */
- if (list_is_last(&xfer->transfer_list,
- &msg->transfers))
- cs_toggle = 1;
- }
-
- msg->actual_length += xfer->len;
-
+ } else {
flush_fifo(sdd);
}
-out:
- if (!cs_toggle || status)
- disable_cs(sdd, spi);
- else
- sdd->tgl_spi = spi;
+ return status;
+}
+
+static int s3c64xx_spi_unprepare_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
s3c64xx_spi_unmap_mssg(sdd, msg);
- msg->status = status;
-
- spi_finalize_current_message(master);
-
return 0;
}
@@ -1071,6 +1046,8 @@
cs->line, err);
goto err_gpio_req;
}
+
+ spi->cs_gpio = cs->line;
}
spi_set_ctldata(spi, cs);
@@ -1117,12 +1094,14 @@
}
pm_runtime_put(&sdd->pdev->dev);
+ writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
disable_cs(sdd, spi);
return 0;
setup_exit:
pm_runtime_put(&sdd->pdev->dev);
/* setup() returns with device de-selected */
+ writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
disable_cs(sdd, spi);
gpio_free(cs->line);
@@ -1141,8 +1120,8 @@
struct s3c64xx_spi_driver_data *sdd;
sdd = spi_master_get_devdata(spi->master);
- if (cs && sdd->cs_gpio) {
- gpio_free(cs->line);
+ if (spi->cs_gpio) {
+ gpio_free(spi->cs_gpio);
if (spi->dev.of_node)
kfree(cs);
}
@@ -1360,7 +1339,9 @@
master->setup = s3c64xx_spi_setup;
master->cleanup = s3c64xx_spi_cleanup;
master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer;
- master->transfer_one_message = s3c64xx_spi_transfer_one_message;
+ master->prepare_message = s3c64xx_spi_prepare_message;
+ master->transfer_one = s3c64xx_spi_transfer_one;
+ master->unprepare_message = s3c64xx_spi_unprepare_message;
master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
master->num_chipselect = sci->num_cs;
master->dma_alignment = 8;
@@ -1432,9 +1413,9 @@
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- if (spi_register_master(master)) {
- dev_err(&pdev->dev, "cannot register SPI master\n");
- ret = -EBUSY;
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "cannot register SPI master: %d\n", ret);
goto err3;
}
@@ -1463,16 +1444,12 @@
pm_runtime_disable(&pdev->dev);
- spi_unregister_master(master);
-
writel(0, sdd->regs + S3C64XX_SPI_INT_EN);
clk_disable_unprepare(sdd->src_clk);
clk_disable_unprepare(sdd->clk);
- spi_master_put(master);
-
return 0;
}
@@ -1530,9 +1507,17 @@
{
struct spi_master *master = dev_get_drvdata(dev);
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
+ int ret;
- clk_prepare_enable(sdd->src_clk);
- clk_prepare_enable(sdd->clk);
+ ret = clk_prepare_enable(sdd->src_clk);
+ if (ret != 0)
+ return ret;
+
+ ret = clk_prepare_enable(sdd->clk);
+ if (ret != 0) {
+ clk_disable_unprepare(sdd->src_clk);
+ return ret;
+ }
return 0;
}
@@ -1618,6 +1603,18 @@
};
static const struct of_device_id s3c64xx_spi_dt_match[] = {
+ { .compatible = "samsung,s3c2443-spi",
+ .data = (void *)&s3c2443_spi_port_config,
+ },
+ { .compatible = "samsung,s3c6410-spi",
+ .data = (void *)&s3c6410_spi_port_config,
+ },
+ { .compatible = "samsung,s5pc100-spi",
+ .data = (void *)&s5pc100_spi_port_config,
+ },
+ { .compatible = "samsung,s5pv210-spi",
+ .data = (void *)&s5pv210_spi_port_config,
+ },
{ .compatible = "samsung,exynos4210-spi",
.data = (void *)&exynos4_spi_port_config,
},
@@ -1635,22 +1632,13 @@
.pm = &s3c64xx_spi_pm,
.of_match_table = of_match_ptr(s3c64xx_spi_dt_match),
},
+ .probe = s3c64xx_spi_probe,
.remove = s3c64xx_spi_remove,
.id_table = s3c64xx_spi_driver_ids,
};
MODULE_ALIAS("platform:s3c64xx-spi");
-static int __init s3c64xx_spi_init(void)
-{
- return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe);
-}
-subsys_initcall(s3c64xx_spi_init);
-
-static void __exit s3c64xx_spi_exit(void)
-{
- platform_driver_unregister(&s3c64xx_spi_driver);
-}
-module_exit(s3c64xx_spi_exit);
+module_platform_driver(s3c64xx_spi_driver);
MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
MODULE_DESCRIPTION("S3C64XX SPI Controller Driver");
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 99c05f6..8d05acc 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -39,6 +39,9 @@
#include <linux/ioport.h>
#include <linux/acpi.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/spi.h>
+
static void spidev_release(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
@@ -525,6 +528,95 @@
/*-------------------------------------------------------------------------*/
+static void spi_set_cs(struct spi_device *spi, bool enable)
+{
+ if (spi->mode & SPI_CS_HIGH)
+ enable = !enable;
+
+ if (spi->cs_gpio >= 0)
+ gpio_set_value(spi->cs_gpio, !enable);
+ else if (spi->master->set_cs)
+ spi->master->set_cs(spi, !enable);
+}
+
+/*
+ * spi_transfer_one_message - Default implementation of transfer_one_message()
+ *
+ * This is a standard implementation of transfer_one_message() for
+ * drivers which impelment a transfer_one() operation. It provides
+ * standard handling of delays and chip select management.
+ */
+static int spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct spi_transfer *xfer;
+ bool cur_cs = true;
+ bool keep_cs = false;
+ int ret = 0;
+
+ spi_set_cs(msg->spi, true);
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ trace_spi_transfer_start(msg, xfer);
+
+ INIT_COMPLETION(master->xfer_completion);
+
+ ret = master->transfer_one(master, msg->spi, xfer);
+ if (ret < 0) {
+ dev_err(&msg->spi->dev,
+ "SPI transfer failed: %d\n", ret);
+ goto out;
+ }
+
+ if (ret > 0)
+ wait_for_completion(&master->xfer_completion);
+
+ trace_spi_transfer_stop(msg, xfer);
+
+ if (msg->status != -EINPROGRESS)
+ goto out;
+
+ if (xfer->delay_usecs)
+ udelay(xfer->delay_usecs);
+
+ if (xfer->cs_change) {
+ if (list_is_last(&xfer->transfer_list,
+ &msg->transfers)) {
+ keep_cs = true;
+ } else {
+ cur_cs = !cur_cs;
+ spi_set_cs(msg->spi, cur_cs);
+ }
+ }
+
+ msg->actual_length += xfer->len;
+ }
+
+out:
+ if (ret != 0 || !keep_cs)
+ spi_set_cs(msg->spi, false);
+
+ if (msg->status == -EINPROGRESS)
+ msg->status = ret;
+
+ spi_finalize_current_message(master);
+
+ return ret;
+}
+
+/**
+ * spi_finalize_current_transfer - report completion of a transfer
+ *
+ * Called by SPI drivers using the core transfer_one_message()
+ * implementation to notify it that the current interrupt driven
+ * transfer has finised and the next one may be scheduled.
+ */
+void spi_finalize_current_transfer(struct spi_master *master)
+{
+ complete(&master->xfer_completion);
+}
+EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
+
/**
* spi_pump_messages - kthread work function which processes spi message queue
* @work: pointer to kthread work struct contained in the master struct
@@ -559,6 +651,7 @@
pm_runtime_mark_last_busy(master->dev.parent);
pm_runtime_put_autosuspend(master->dev.parent);
}
+ trace_spi_master_idle(master);
return;
}
@@ -587,6 +680,9 @@
}
}
+ if (!was_busy)
+ trace_spi_master_busy(master);
+
if (!was_busy && master->prepare_transfer_hardware) {
ret = master->prepare_transfer_hardware(master);
if (ret) {
@@ -599,6 +695,20 @@
}
}
+ trace_spi_message_start(master->cur_msg);
+
+ if (master->prepare_message) {
+ ret = master->prepare_message(master, master->cur_msg);
+ if (ret) {
+ dev_err(&master->dev,
+ "failed to prepare message: %d\n", ret);
+ master->cur_msg->status = ret;
+ spi_finalize_current_message(master);
+ return;
+ }
+ master->cur_msg_prepared = true;
+ }
+
ret = master->transfer_one_message(master, master->cur_msg);
if (ret) {
dev_err(&master->dev,
@@ -680,6 +790,7 @@
{
struct spi_message *mesg;
unsigned long flags;
+ int ret;
spin_lock_irqsave(&master->queue_lock, flags);
mesg = master->cur_msg;
@@ -688,9 +799,20 @@
queue_kthread_work(&master->kworker, &master->pump_messages);
spin_unlock_irqrestore(&master->queue_lock, flags);
+ if (master->cur_msg_prepared && master->unprepare_message) {
+ ret = master->unprepare_message(master, mesg);
+ if (ret) {
+ dev_err(&master->dev,
+ "failed to unprepare message: %d\n", ret);
+ }
+ }
+ master->cur_msg_prepared = false;
+
mesg->state = NULL;
if (mesg->complete)
mesg->complete(mesg->context);
+
+ trace_spi_message_done(mesg);
}
EXPORT_SYMBOL_GPL(spi_finalize_current_message);
@@ -805,6 +927,8 @@
master->queued = true;
master->transfer = spi_queued_transfer;
+ if (!master->transfer_one_message)
+ master->transfer_one_message = spi_transfer_one_message;
/* Initialize and start queue */
ret = spi_init_queue(master);
@@ -1205,6 +1329,7 @@
spin_lock_init(&master->bus_lock_spinlock);
mutex_init(&master->bus_lock_mutex);
master->bus_lock_flag = 0;
+ init_completion(&master->xfer_completion);
/* register the device, then userspace will see it.
* registration fails if the bus ID is in use.
@@ -1451,6 +1576,10 @@
struct spi_master *master = spi->master;
struct spi_transfer *xfer;
+ message->spi = spi;
+
+ trace_spi_message_submit(message);
+
if (list_empty(&message->transfers))
return -EINVAL;
if (!message->complete)
@@ -1550,7 +1679,6 @@
}
}
- message->spi = spi;
message->status = -EINPROGRESS;
return master->transfer(spi, message);
}
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 4d634d6..1619ed4 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -23,6 +23,7 @@
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/kthread.h>
+#include <linux/completion.h>
/*
* INTERFACES between SPI master-side drivers and SPI infrastructure.
@@ -150,8 +151,7 @@
}
struct spi_message;
-
-
+struct spi_transfer;
/**
* struct spi_driver - Host side "protocol" driver
@@ -257,6 +257,9 @@
* @queue_lock: spinlock to syncronise access to message queue
* @queue: message queue
* @cur_msg: the currently in-flight message
+ * @cur_msg_prepared: spi_prepare_message was called for the currently
+ * in-flight message
+ * @xfer_completion: used by core tranfer_one_message()
* @busy: message pump is busy
* @running: message pump is running
* @rt: whether this queue is set to run as a realtime task
@@ -274,6 +277,16 @@
* @unprepare_transfer_hardware: there are currently no more messages on the
* queue so the subsystem notifies the driver that it may relax the
* hardware by issuing this call
+ * @set_cs: assert or deassert chip select, true to assert. May be called
+ * from interrupt context.
+ * @prepare_message: set up the controller to transfer a single message,
+ * for example doing DMA mapping. Called from threaded
+ * context.
+ * @transfer_one: transfer a single spi_transfer. When the
+ * driver is finished with this transfer it must call
+ * spi_finalize_current_transfer() so the subsystem can issue
+ * the next transfer
+ * @unprepare_message: undo any work done by prepare_message().
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
* number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself).
@@ -388,11 +401,25 @@
bool running;
bool rt;
bool auto_runtime_pm;
+ bool cur_msg_prepared;
+ struct completion xfer_completion;
int (*prepare_transfer_hardware)(struct spi_master *master);
int (*transfer_one_message)(struct spi_master *master,
struct spi_message *mesg);
int (*unprepare_transfer_hardware)(struct spi_master *master);
+ int (*prepare_message)(struct spi_master *master,
+ struct spi_message *message);
+ int (*unprepare_message)(struct spi_master *master,
+ struct spi_message *message);
+
+ /*
+ * These hooks are for drivers that use a generic implementation
+ * of transfer_one_message() provied by the core.
+ */
+ void (*set_cs)(struct spi_device *spi, bool enable);
+ int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *transfer);
/* gpio chip select */
int *cs_gpios;
@@ -428,6 +455,7 @@
/* Calls the driver make to interact with the message queue */
extern struct spi_message *spi_get_next_queued_message(struct spi_master *master);
extern void spi_finalize_current_message(struct spi_master *master);
+extern void spi_finalize_current_transfer(struct spi_master *master);
/* the spi driver core manages memory for the spi_master classdev */
extern struct spi_master *
diff --git a/include/trace/events/spi.h b/include/trace/events/spi.h
new file mode 100644
index 0000000..7e02c98
--- /dev/null
+++ b/include/trace/events/spi.h
@@ -0,0 +1,156 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM spi
+
+#if !defined(_TRACE_SPI_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SPI_H
+
+#include <linux/ktime.h>
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(spi_master,
+
+ TP_PROTO(struct spi_master *master),
+
+ TP_ARGS(master),
+
+ TP_STRUCT__entry(
+ __field( int, bus_num )
+ ),
+
+ TP_fast_assign(
+ __entry->bus_num = master->bus_num;
+ ),
+
+ TP_printk("spi%d", (int)__entry->bus_num)
+
+);
+
+DEFINE_EVENT(spi_master, spi_master_idle,
+
+ TP_PROTO(struct spi_master *master),
+
+ TP_ARGS(master)
+
+);
+
+DEFINE_EVENT(spi_master, spi_master_busy,
+
+ TP_PROTO(struct spi_master *master),
+
+ TP_ARGS(master)
+
+);
+
+DECLARE_EVENT_CLASS(spi_message,
+
+ TP_PROTO(struct spi_message *msg),
+
+ TP_ARGS(msg),
+
+ TP_STRUCT__entry(
+ __field( int, bus_num )
+ __field( int, chip_select )
+ __field( struct spi_message *, msg )
+ ),
+
+ TP_fast_assign(
+ __entry->bus_num = msg->spi->master->bus_num;
+ __entry->chip_select = msg->spi->chip_select;
+ __entry->msg = msg;
+ ),
+
+ TP_printk("spi%d.%d %p", (int)__entry->bus_num,
+ (int)__entry->chip_select,
+ (struct spi_message *)__entry->msg)
+);
+
+DEFINE_EVENT(spi_message, spi_message_submit,
+
+ TP_PROTO(struct spi_message *msg),
+
+ TP_ARGS(msg)
+
+);
+
+DEFINE_EVENT(spi_message, spi_message_start,
+
+ TP_PROTO(struct spi_message *msg),
+
+ TP_ARGS(msg)
+
+);
+
+TRACE_EVENT(spi_message_done,
+
+ TP_PROTO(struct spi_message *msg),
+
+ TP_ARGS(msg),
+
+ TP_STRUCT__entry(
+ __field( int, bus_num )
+ __field( int, chip_select )
+ __field( struct spi_message *, msg )
+ __field( unsigned, frame )
+ __field( unsigned, actual )
+ ),
+
+ TP_fast_assign(
+ __entry->bus_num = msg->spi->master->bus_num;
+ __entry->chip_select = msg->spi->chip_select;
+ __entry->msg = msg;
+ __entry->frame = msg->frame_length;
+ __entry->actual = msg->actual_length;
+ ),
+
+ TP_printk("spi%d.%d %p len=%u/%u", (int)__entry->bus_num,
+ (int)__entry->chip_select,
+ (struct spi_message *)__entry->msg,
+ (unsigned)__entry->actual, (unsigned)__entry->frame)
+);
+
+DECLARE_EVENT_CLASS(spi_transfer,
+
+ TP_PROTO(struct spi_message *msg, struct spi_transfer *xfer),
+
+ TP_ARGS(msg, xfer),
+
+ TP_STRUCT__entry(
+ __field( int, bus_num )
+ __field( int, chip_select )
+ __field( struct spi_transfer *, xfer )
+ __field( int, len )
+ ),
+
+ TP_fast_assign(
+ __entry->bus_num = msg->spi->master->bus_num;
+ __entry->chip_select = msg->spi->chip_select;
+ __entry->xfer = xfer;
+ __entry->len = xfer->len;
+ ),
+
+ TP_printk("spi%d.%d %p len=%d", (int)__entry->bus_num,
+ (int)__entry->chip_select,
+ (struct spi_message *)__entry->xfer,
+ (int)__entry->len)
+);
+
+DEFINE_EVENT(spi_transfer, spi_transfer_start,
+
+ TP_PROTO(struct spi_message *msg, struct spi_transfer *xfer),
+
+ TP_ARGS(msg, xfer)
+
+);
+
+DEFINE_EVENT(spi_transfer, spi_transfer_stop,
+
+ TP_PROTO(struct spi_message *msg, struct spi_transfer *xfer),
+
+ TP_ARGS(msg, xfer)
+
+);
+
+#endif /* _TRACE_POWER_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>