| /* |
| * gpiolib support for Wolfson WM8994 |
| * |
| * Copyright 2009 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/gpio.h> |
| #include <linux/mfd/core.h> |
| #include <linux/platform_device.h> |
| #include <linux/seq_file.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/mfd/wm8994/core.h> |
| #include <linux/mfd/wm8994/pdata.h> |
| #include <linux/mfd/wm8994/gpio.h> |
| #include <linux/mfd/wm8994/registers.h> |
| |
| struct wm8994_gpio { |
| struct wm8994 *wm8994; |
| struct gpio_chip gpio_chip; |
| }; |
| |
| static inline struct wm8994_gpio *to_wm8994_gpio(struct gpio_chip *chip) |
| { |
| return container_of(chip, struct wm8994_gpio, gpio_chip); |
| } |
| |
| static int wm8994_gpio_request(struct gpio_chip *chip, unsigned offset) |
| { |
| struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; |
| |
| switch (wm8994->type) { |
| case WM8958: |
| switch (offset) { |
| case 1: |
| case 2: |
| case 3: |
| case 4: |
| case 6: |
| return -EINVAL; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int wm8994_gpio_direction_in(struct gpio_chip *chip, unsigned offset) |
| { |
| struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; |
| |
| return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, |
| WM8994_GPN_DIR, WM8994_GPN_DIR); |
| } |
| |
| static int wm8994_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; |
| int ret; |
| |
| ret = wm8994_reg_read(wm8994, WM8994_GPIO_1 + offset); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & WM8994_GPN_LVL) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static int wm8994_gpio_direction_out(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; |
| |
| if (value) |
| value = WM8994_GPN_LVL; |
| |
| return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, |
| WM8994_GPN_DIR | WM8994_GPN_LVL, value); |
| } |
| |
| static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; |
| |
| if (value) |
| value = WM8994_GPN_LVL; |
| |
| wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_LVL, value); |
| } |
| |
| static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset) |
| { |
| struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; |
| |
| return regmap_irq_get_virq(wm8994->irq_data, offset); |
| } |
| |
| |
| #ifdef CONFIG_DEBUG_FS |
| static const char *wm8994_gpio_fn(u16 fn) |
| { |
| switch (fn) { |
| case WM8994_GP_FN_PIN_SPECIFIC: |
| return "pin-specific"; |
| case WM8994_GP_FN_GPIO: |
| return "GPIO"; |
| case WM8994_GP_FN_SDOUT: |
| return "SDOUT"; |
| case WM8994_GP_FN_IRQ: |
| return "IRQ"; |
| case WM8994_GP_FN_TEMPERATURE: |
| return "Temperature"; |
| case WM8994_GP_FN_MICBIAS1_DET: |
| return "MICBIAS1 detect"; |
| case WM8994_GP_FN_MICBIAS1_SHORT: |
| return "MICBIAS1 short"; |
| case WM8994_GP_FN_MICBIAS2_DET: |
| return "MICBIAS2 detect"; |
| case WM8994_GP_FN_MICBIAS2_SHORT: |
| return "MICBIAS2 short"; |
| case WM8994_GP_FN_FLL1_LOCK: |
| return "FLL1 lock"; |
| case WM8994_GP_FN_FLL2_LOCK: |
| return "FLL2 lock"; |
| case WM8994_GP_FN_SRC1_LOCK: |
| return "SRC1 lock"; |
| case WM8994_GP_FN_SRC2_LOCK: |
| return "SRC2 lock"; |
| case WM8994_GP_FN_DRC1_ACT: |
| return "DRC1 activity"; |
| case WM8994_GP_FN_DRC2_ACT: |
| return "DRC2 activity"; |
| case WM8994_GP_FN_DRC3_ACT: |
| return "DRC3 activity"; |
| case WM8994_GP_FN_WSEQ_STATUS: |
| return "Write sequencer"; |
| case WM8994_GP_FN_FIFO_ERROR: |
| return "FIFO error"; |
| case WM8994_GP_FN_OPCLK: |
| return "OPCLK"; |
| case WM8994_GP_FN_THW: |
| return "Thermal warning"; |
| case WM8994_GP_FN_DCS_DONE: |
| return "DC servo"; |
| case WM8994_GP_FN_FLL1_OUT: |
| return "FLL1 output"; |
| case WM8994_GP_FN_FLL2_OUT: |
| return "FLL1 output"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) |
| { |
| struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; |
| int i; |
| |
| for (i = 0; i < chip->ngpio; i++) { |
| int gpio = i + chip->base; |
| int reg; |
| const char *label; |
| |
| /* We report the GPIO even if it's not requested since |
| * we're also reporting things like alternate |
| * functions which apply even when the GPIO is not in |
| * use as a GPIO. |
| */ |
| label = gpiochip_is_requested(chip, i); |
| if (!label) |
| label = "Unrequested"; |
| |
| seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label); |
| |
| reg = wm8994_reg_read(wm8994, WM8994_GPIO_1 + i); |
| if (reg < 0) { |
| dev_err(wm8994->dev, |
| "GPIO control %d read failed: %d\n", |
| gpio, reg); |
| seq_printf(s, "\n"); |
| continue; |
| } |
| |
| if (reg & WM8994_GPN_DIR) |
| seq_printf(s, "in "); |
| else |
| seq_printf(s, "out "); |
| |
| if (reg & WM8994_GPN_PU) |
| seq_printf(s, "pull up "); |
| |
| if (reg & WM8994_GPN_PD) |
| seq_printf(s, "pull down "); |
| |
| if (reg & WM8994_GPN_POL) |
| seq_printf(s, "inverted "); |
| else |
| seq_printf(s, "noninverted "); |
| |
| if (reg & WM8994_GPN_OP_CFG) |
| seq_printf(s, "open drain "); |
| else |
| seq_printf(s, "CMOS "); |
| |
| seq_printf(s, "%s (%x)\n", |
| wm8994_gpio_fn(reg & WM8994_GPN_FN_MASK), reg); |
| } |
| } |
| #else |
| #define wm8994_gpio_dbg_show NULL |
| #endif |
| |
| static struct gpio_chip template_chip = { |
| .label = "wm8994", |
| .owner = THIS_MODULE, |
| .request = wm8994_gpio_request, |
| .direction_input = wm8994_gpio_direction_in, |
| .get = wm8994_gpio_get, |
| .direction_output = wm8994_gpio_direction_out, |
| .set = wm8994_gpio_set, |
| .to_irq = wm8994_gpio_to_irq, |
| .dbg_show = wm8994_gpio_dbg_show, |
| .can_sleep = 1, |
| }; |
| |
| static int __devinit wm8994_gpio_probe(struct platform_device *pdev) |
| { |
| struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent); |
| struct wm8994_pdata *pdata = wm8994->dev->platform_data; |
| struct wm8994_gpio *wm8994_gpio; |
| int ret; |
| |
| wm8994_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8994_gpio), |
| GFP_KERNEL); |
| if (wm8994_gpio == NULL) |
| return -ENOMEM; |
| |
| wm8994_gpio->wm8994 = wm8994; |
| wm8994_gpio->gpio_chip = template_chip; |
| wm8994_gpio->gpio_chip.ngpio = WM8994_GPIO_MAX; |
| wm8994_gpio->gpio_chip.dev = &pdev->dev; |
| if (pdata && pdata->gpio_base) |
| wm8994_gpio->gpio_chip.base = pdata->gpio_base; |
| else |
| wm8994_gpio->gpio_chip.base = -1; |
| |
| ret = gpiochip_add(&wm8994_gpio->gpio_chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Could not register gpiochip, %d\n", |
| ret); |
| goto err; |
| } |
| |
| platform_set_drvdata(pdev, wm8994_gpio); |
| |
| return ret; |
| |
| err: |
| return ret; |
| } |
| |
| static int __devexit wm8994_gpio_remove(struct platform_device *pdev) |
| { |
| struct wm8994_gpio *wm8994_gpio = platform_get_drvdata(pdev); |
| |
| return gpiochip_remove(&wm8994_gpio->gpio_chip); |
| } |
| |
| static struct platform_driver wm8994_gpio_driver = { |
| .driver.name = "wm8994-gpio", |
| .driver.owner = THIS_MODULE, |
| .probe = wm8994_gpio_probe, |
| .remove = wm8994_gpio_remove, |
| }; |
| |
| static int __init wm8994_gpio_init(void) |
| { |
| return platform_driver_register(&wm8994_gpio_driver); |
| } |
| subsys_initcall(wm8994_gpio_init); |
| |
| static void __exit wm8994_gpio_exit(void) |
| { |
| platform_driver_unregister(&wm8994_gpio_driver); |
| } |
| module_exit(wm8994_gpio_exit); |
| |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("GPIO interface for WM8994"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:wm8994-gpio"); |