[PATCH] swsusp: fix remaining u32 vs. pm_message_t confusion
Fix remaining bits of u32 vs. pm_message confusion. Should not break
anything.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 7babf6a..55a72c7 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -2004,14 +2004,14 @@
}
static int
-bnx2_set_power_state(struct bnx2 *bp, int state)
+bnx2_set_power_state(struct bnx2 *bp, pci_power_t state)
{
u16 pmcsr;
pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr);
switch (state) {
- case 0: {
+ case PCI_D0: {
u32 val;
pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL,
@@ -2032,7 +2032,7 @@
REG_WR(bp, BNX2_RPM_CONFIG, val);
break;
}
- case 3: {
+ case PCI_D3hot: {
int i;
u32 val, wol_msg;
@@ -3886,7 +3886,7 @@
struct bnx2 *bp = dev->priv;
int rc;
- bnx2_set_power_state(bp, 0);
+ bnx2_set_power_state(bp, PCI_D0);
bnx2_disable_int(bp);
rc = bnx2_alloc_mem(bp);
@@ -4197,7 +4197,7 @@
bnx2_free_mem(bp);
bp->link_up = 0;
netif_carrier_off(bp->dev);
- bnx2_set_power_state(bp, 3);
+ bnx2_set_power_state(bp, PCI_D3hot);
return 0;
}
@@ -5203,7 +5203,7 @@
BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
- bnx2_set_power_state(bp, 0);
+ bnx2_set_power_state(bp, PCI_D0);
bp->chip_id = REG_RD(bp, BNX2_MISC_ID);
@@ -5495,7 +5495,7 @@
}
static int
-bnx2_suspend(struct pci_dev *pdev, u32 state)
+bnx2_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct bnx2 *bp = dev->priv;
@@ -5513,7 +5513,7 @@
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
bnx2_reset_chip(bp, reset_code);
bnx2_free_skbs(bp);
- bnx2_set_power_state(bp, state);
+ bnx2_set_power_state(bp, pci_choose_state(pdev, state));
return 0;
}
@@ -5526,7 +5526,7 @@
if (!netif_running(dev))
return 0;
- bnx2_set_power_state(bp, 0);
+ bnx2_set_power_state(bp, PCI_D0);
netif_device_attach(dev);
bnx2_init_nic(bp);
bnx2_netif_start(bp);