[ALSA] maestro3: Add hardware volume control quirk list
Maestro3 driver
Add a hardware volume quirk list to the maestro3 driver. Details were
taken from the Windows driver. Hardware volume control is enabled only for
the systems in the list.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 3690ea0..096f151 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -779,6 +779,12 @@
(e.g. for IrDA on Dell Inspirons) */
};
+struct m3_hv_quirk {
+ u16 vendor, device, subsystem_vendor, subsystem_device;
+ u32 config; /* ALLEGRO_CONFIG hardware volume bits */
+ int is_omnibook; /* Do HP OmniBook GPIO magic? */
+};
+
struct m3_list {
int curlen;
int mem_addr;
@@ -828,6 +834,7 @@
struct pci_dev *pci;
struct m3_quirk *quirk;
+ struct m3_hv_quirk *hv_quirk;
int dacs_active;
int timer_users;
@@ -856,7 +863,7 @@
snd_kcontrol_t *master_switch;
snd_kcontrol_t *master_volume;
struct tasklet_struct hwvol_tq;
-
+
#ifdef CONFIG_PM
u16 *suspend_mem;
#endif
@@ -973,6 +980,71 @@
{ NULL }
};
+/* These values came from the Windows driver. */
+static struct m3_hv_quirk m3_hv_quirk_list[] = {
+ /* Allegro chips */
+ { 0x125D, 0x1988, 0x0E11, 0x002E, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x0E11, 0x0094, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x0E11, 0xB112, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x0E11, 0xB114, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x103C, 0x0012, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x103C, 0x0018, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x103C, 0x001C, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x103C, 0x001D, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x103C, 0x001E, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x107B, 0x3350, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x10F7, 0x8338, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x10F7, 0x833C, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x10F7, 0x833D, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x10F7, 0x833E, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x10F7, 0x833F, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x13BD, 0x1018, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x13BD, 0x1019, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x13BD, 0x101A, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x14FF, 0x0F03, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x14FF, 0x0F04, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x14FF, 0x0F05, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x156D, 0xB400, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x156D, 0xB795, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x156D, 0xB797, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x156D, 0xC700, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
+ { 0x125D, 0x1988, 0x1033, 0x80F1, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x103C, 0x001A, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 }, /* HP OmniBook 6100 */
+ { 0x125D, 0x1988, 0x107B, 0x340A, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x107B, 0x3450, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x109F, 0x3134, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x109F, 0x3161, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x144D, 0x3280, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x144D, 0x3281, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x144D, 0xC002, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x144D, 0xC003, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x1509, 0x1740, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x1610, 0x0010, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x1988, 0x1042, 0x1042, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1988, 0x107B, 0x9500, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1988, 0x14FF, 0x0F06, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1988, 0x1558, 0x8586, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1988, 0x161F, 0x2011, HV_CTRL_ENABLE, 0 },
+ /* Maestro3 chips */
+ { 0x125D, 0x1998, 0x103C, 0x000E, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x103C, 0x0010, HV_CTRL_ENABLE, 1 }, /* HP OmniBook 6000 */
+ { 0x125D, 0x1998, 0x103C, 0x0011, HV_CTRL_ENABLE, 1 }, /* HP OmniBook 500 */
+ { 0x125D, 0x1998, 0x103C, 0x001B, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x104D, 0x80A6, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x104D, 0x80AA, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x107B, 0x5300, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x110A, 0x1998, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x13BD, 0x1015, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x13BD, 0x101C, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x13BD, 0x1802, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x1599, 0x0715, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x1998, 0x5643, 0x5643, HV_CTRL_ENABLE, 0 },
+ { 0x125D, 0x199A, 0x144D, 0x3260, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x199A, 0x144D, 0x3261, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x199A, 0x144D, 0xC000, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
+ { 0x125D, 0x199A, 0x144D, 0xC001, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
+ { 0 }
+};
/*
* lowlevel functions
@@ -2392,21 +2464,27 @@
DISABLE_LEGACY);
pci_write_config_word(pcidev, PCI_LEGACY_AUDIO_CTRL, w);
- /*
- * Volume buttons on some HP OmniBook laptops (500 and 6000 at least)
- * don't work correctly. This makes them work for the most part.
- * Volume up and down buttons on the laptop side work perfectly.
- * Fn+cursor_up (volme up) works, Fn+cursor_down (volume down) doesn't,
- * Fn+F8 (mute) works acts as volume up.
- */
- outw(~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_MASK);
- outw(inw(io + GPIO_DIRECTION) & ~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DIRECTION);
- outw((GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DATA);
- outw(0xffff, io + GPIO_MASK);
-
+ if (chip->hv_quirk && chip->hv_quirk->is_omnibook) {
+ /*
+ * Volume buttons on some HP OmniBook laptops don't work
+ * correctly. This makes them work for the most part.
+ *
+ * Volume up and down buttons on the laptop side work.
+ * Fn+cursor_up (volme up) works.
+ * Fn+cursor_down (volume down) doesn't work.
+ * Fn+F7 (mute) works acts as volume up.
+ */
+ outw(~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_MASK);
+ outw(inw(io + GPIO_DIRECTION) & ~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DIRECTION);
+ outw((GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DATA);
+ outw(0xffff, io + GPIO_MASK);
+ }
pci_read_config_dword(pcidev, PCI_ALLEGRO_CONFIG, &n);
- n &= ~HV_BUTTON_FROM_GD;
- n |= HV_CTRL_ENABLE | REDUCED_DEBOUNCE;
+ n &= ~(HV_CTRL_ENABLE | REDUCED_DEBOUNCE | HV_BUTTON_FROM_GD);
+ if (chip->hv_quirk)
+ n |= chip->hv_quirk->config;
+ /* For some reason we must always use reduced debounce. */
+ n |= REDUCED_DEBOUNCE;
n |= PM_CTRL_ENABLE | CLK_DIV_BY_49 | USE_PCI_TIMING;
pci_write_config_dword(pcidev, PCI_ALLEGRO_CONFIG, n);
@@ -2594,7 +2672,7 @@
m3_t *chip;
int i, err;
struct m3_quirk *quirk;
- u16 subsystem_vendor, subsystem_device;
+ struct m3_hv_quirk *hv_quirk;
static snd_device_ops_t ops = {
.dev_free = snd_m3_dev_free,
};
@@ -2632,18 +2710,25 @@
chip->pci = pci;
chip->irq = -1;
- pci_read_config_word(pci, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vendor);
- pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &subsystem_device);
-
for (quirk = m3_quirk_list; quirk->vendor; quirk++) {
- if (subsystem_vendor == quirk->vendor &&
- subsystem_device == quirk->device) {
+ if (pci->subsystem_vendor == quirk->vendor &&
+ pci->subsystem_device == quirk->device) {
printk(KERN_INFO "maestro3: enabled hack for '%s'\n", quirk->name);
chip->quirk = quirk;
break;
}
}
+ for (hv_quirk = m3_hv_quirk_list; hv_quirk->vendor; hv_quirk++) {
+ if (pci->vendor == hv_quirk->vendor &&
+ pci->device == hv_quirk->device &&
+ pci->subsystem_vendor == hv_quirk->subsystem_vendor &&
+ pci->subsystem_device == hv_quirk->subsystem_device) {
+ chip->hv_quirk = hv_quirk;
+ break;
+ }
+ }
+
chip->external_amp = enable_amp;
if (amp_gpio >= 0 && amp_gpio <= 0x0f)
chip->amp_gpio = amp_gpio;