| /* |
| * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. |
| * |
| * Derived from Intel e1000 driver |
| * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include "atl1c.h" |
| |
| #define ATL1C_DRV_VERSION "1.0.1.1-NAPI" |
| char atl1c_driver_name[] = "atl1c"; |
| char atl1c_driver_version[] = ATL1C_DRV_VERSION; |
| |
| /* |
| * atl1c_pci_tbl - PCI Device ID Table |
| * |
| * Wildcard entries (PCI_ANY_ID) should come last |
| * Last entry must be all 0s |
| * |
| * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, |
| * Class, Class Mask, private data (not used) } |
| */ |
| static DEFINE_PCI_DEVICE_TABLE(atl1c_pci_tbl) = { |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)}, |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)}, |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B)}, |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B2)}, |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D)}, |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D_2_0)}, |
| /* required last entry */ |
| { 0 } |
| }; |
| MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl); |
| |
| MODULE_AUTHOR("Jie Yang"); |
| MODULE_AUTHOR("Qualcomm Atheros Inc., <nic-devel@qualcomm.com>"); |
| MODULE_DESCRIPTION("Qualcom Atheros 100/1000M Ethernet Network Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(ATL1C_DRV_VERSION); |
| |
| static int atl1c_stop_mac(struct atl1c_hw *hw); |
| static void atl1c_disable_l0s_l1(struct atl1c_hw *hw); |
| static void atl1c_set_aspm(struct atl1c_hw *hw, u16 link_speed); |
| static void atl1c_start_mac(struct atl1c_adapter *adapter); |
| static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, |
| int *work_done, int work_to_do); |
| static int atl1c_up(struct atl1c_adapter *adapter); |
| static void atl1c_down(struct atl1c_adapter *adapter); |
| static int atl1c_reset_mac(struct atl1c_hw *hw); |
| static void atl1c_reset_dma_ring(struct atl1c_adapter *adapter); |
| static int atl1c_configure(struct atl1c_adapter *adapter); |
| static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter); |
| |
| static const u16 atl1c_pay_load_size[] = { |
| 128, 256, 512, 1024, 2048, 4096, |
| }; |
| |
| |
| static const u32 atl1c_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | |
| NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; |
| static void atl1c_pcie_patch(struct atl1c_hw *hw) |
| { |
| u32 mst_data, data; |
| |
| /* pclk sel could switch to 25M */ |
| AT_READ_REG(hw, REG_MASTER_CTRL, &mst_data); |
| mst_data &= ~MASTER_CTRL_CLK_SEL_DIS; |
| AT_WRITE_REG(hw, REG_MASTER_CTRL, mst_data); |
| |
| /* WoL/PCIE related settings */ |
| if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) { |
| AT_READ_REG(hw, REG_PCIE_PHYMISC, &data); |
| data |= PCIE_PHYMISC_FORCE_RCV_DET; |
| AT_WRITE_REG(hw, REG_PCIE_PHYMISC, data); |
| } else { /* new dev set bit5 of MASTER */ |
| if (!(mst_data & MASTER_CTRL_WAKEN_25M)) |
| AT_WRITE_REG(hw, REG_MASTER_CTRL, |
| mst_data | MASTER_CTRL_WAKEN_25M); |
| } |
| /* aspm/PCIE setting only for l2cb 1.0 */ |
| if (hw->nic_type == athr_l2c_b && hw->revision_id == L2CB_V10) { |
| AT_READ_REG(hw, REG_PCIE_PHYMISC2, &data); |
| data = FIELD_SETX(data, PCIE_PHYMISC2_CDR_BW, |
| L2CB1_PCIE_PHYMISC2_CDR_BW); |
| data = FIELD_SETX(data, PCIE_PHYMISC2_L0S_TH, |
| L2CB1_PCIE_PHYMISC2_L0S_TH); |
| AT_WRITE_REG(hw, REG_PCIE_PHYMISC2, data); |
| /* extend L1 sync timer */ |
| AT_READ_REG(hw, REG_LINK_CTRL, &data); |
| data |= LINK_CTRL_EXT_SYNC; |
| AT_WRITE_REG(hw, REG_LINK_CTRL, data); |
| } |
| /* l2cb 1.x & l1d 1.x */ |
| if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l1d) { |
| AT_READ_REG(hw, REG_PM_CTRL, &data); |
| data |= PM_CTRL_L0S_BUFSRX_EN; |
| AT_WRITE_REG(hw, REG_PM_CTRL, data); |
| /* clear vendor msg */ |
| AT_READ_REG(hw, REG_DMA_DBG, &data); |
| AT_WRITE_REG(hw, REG_DMA_DBG, data & ~DMA_DBG_VENDOR_MSG); |
| } |
| } |
| |
| /* FIXME: no need any more ? */ |
| /* |
| * atl1c_init_pcie - init PCIE module |
| */ |
| static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag) |
| { |
| u32 data; |
| u32 pci_cmd; |
| struct pci_dev *pdev = hw->adapter->pdev; |
| int pos; |
| |
| AT_READ_REG(hw, PCI_COMMAND, &pci_cmd); |
| pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; |
| pci_cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | |
| PCI_COMMAND_IO); |
| AT_WRITE_REG(hw, PCI_COMMAND, pci_cmd); |
| |
| /* |
| * Clear any PowerSaveing Settings |
| */ |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_enable_wake(pdev, PCI_D3cold, 0); |
| /* wol sts read-clear */ |
| AT_READ_REG(hw, REG_WOL_CTRL, &data); |
| AT_WRITE_REG(hw, REG_WOL_CTRL, 0); |
| |
| /* |
| * Mask some pcie error bits |
| */ |
| pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); |
| pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, &data); |
| data &= ~(PCI_ERR_UNC_DLP | PCI_ERR_UNC_FCP); |
| pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, data); |
| /* clear error status */ |
| pcie_capability_write_word(pdev, PCI_EXP_DEVSTA, |
| PCI_EXP_DEVSTA_NFED | |
| PCI_EXP_DEVSTA_FED | |
| PCI_EXP_DEVSTA_CED | |
| PCI_EXP_DEVSTA_URD); |
| |
| AT_READ_REG(hw, REG_LTSSM_ID_CTRL, &data); |
| data &= ~LTSSM_ID_EN_WRO; |
| AT_WRITE_REG(hw, REG_LTSSM_ID_CTRL, data); |
| |
| atl1c_pcie_patch(hw); |
| if (flag & ATL1C_PCIE_L0S_L1_DISABLE) |
| atl1c_disable_l0s_l1(hw); |
| |
| msleep(5); |
| } |
| |
| /** |
| * atl1c_irq_enable - Enable default interrupt generation settings |
| * @adapter: board private structure |
| */ |
| static inline void atl1c_irq_enable(struct atl1c_adapter *adapter) |
| { |
| if (likely(atomic_dec_and_test(&adapter->irq_sem))) { |
| AT_WRITE_REG(&adapter->hw, REG_ISR, 0x7FFFFFFF); |
| AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask); |
| AT_WRITE_FLUSH(&adapter->hw); |
| } |
| } |
| |
| /** |
| * atl1c_irq_disable - Mask off interrupt generation on the NIC |
| * @adapter: board private structure |
| */ |
| static inline void atl1c_irq_disable(struct atl1c_adapter *adapter) |
| { |
| atomic_inc(&adapter->irq_sem); |
| AT_WRITE_REG(&adapter->hw, REG_IMR, 0); |
| AT_WRITE_REG(&adapter->hw, REG_ISR, ISR_DIS_INT); |
| AT_WRITE_FLUSH(&adapter->hw); |
| synchronize_irq(adapter->pdev->irq); |
| } |
| |
| /** |
| * atl1c_irq_reset - reset interrupt confiure on the NIC |
| * @adapter: board private structure |
| */ |
| static inline void atl1c_irq_reset(struct atl1c_adapter *adapter) |
| { |
| atomic_set(&adapter->irq_sem, 1); |
| atl1c_irq_enable(adapter); |
| } |
| |
| /* |
| * atl1c_wait_until_idle - wait up to AT_HW_MAX_IDLE_DELAY reads |
| * of the idle status register until the device is actually idle |
| */ |
| static u32 atl1c_wait_until_idle(struct atl1c_hw *hw, u32 modu_ctrl) |
| { |
| int timeout; |
| u32 data; |
| |
| for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) { |
| AT_READ_REG(hw, REG_IDLE_STATUS, &data); |
| if ((data & modu_ctrl) == 0) |
| return 0; |
| msleep(1); |
| } |
| return data; |
| } |
| |
| /** |
| * atl1c_phy_config - Timer Call-back |
| * @data: pointer to netdev cast into an unsigned long |
| */ |
| static void atl1c_phy_config(unsigned long data) |
| { |
| struct atl1c_adapter *adapter = (struct atl1c_adapter *) data; |
| struct atl1c_hw *hw = &adapter->hw; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&adapter->mdio_lock, flags); |
| atl1c_restart_autoneg(hw); |
| spin_unlock_irqrestore(&adapter->mdio_lock, flags); |
| } |
| |
| void atl1c_reinit_locked(struct atl1c_adapter *adapter) |
| { |
| WARN_ON(in_interrupt()); |
| atl1c_down(adapter); |
| atl1c_up(adapter); |
| clear_bit(__AT_RESETTING, &adapter->flags); |
| } |
| |
| static void atl1c_check_link_status(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| struct pci_dev *pdev = adapter->pdev; |
| int err; |
| unsigned long flags; |
| u16 speed, duplex, phy_data; |
| |
| spin_lock_irqsave(&adapter->mdio_lock, flags); |
| /* MII_BMSR must read twise */ |
| atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); |
| atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); |
| spin_unlock_irqrestore(&adapter->mdio_lock, flags); |
| |
| if ((phy_data & BMSR_LSTATUS) == 0) { |
| /* link down */ |
| netif_carrier_off(netdev); |
| hw->hibernate = true; |
| if (atl1c_reset_mac(hw) != 0) |
| if (netif_msg_hw(adapter)) |
| dev_warn(&pdev->dev, "reset mac failed\n"); |
| atl1c_set_aspm(hw, SPEED_0); |
| atl1c_post_phy_linkchg(hw, SPEED_0); |
| atl1c_reset_dma_ring(adapter); |
| atl1c_configure(adapter); |
| } else { |
| /* Link Up */ |
| hw->hibernate = false; |
| spin_lock_irqsave(&adapter->mdio_lock, flags); |
| err = atl1c_get_speed_and_duplex(hw, &speed, &duplex); |
| spin_unlock_irqrestore(&adapter->mdio_lock, flags); |
| if (unlikely(err)) |
| return; |
| /* link result is our setting */ |
| if (adapter->link_speed != speed || |
| adapter->link_duplex != duplex) { |
| adapter->link_speed = speed; |
| adapter->link_duplex = duplex; |
| atl1c_set_aspm(hw, speed); |
| atl1c_post_phy_linkchg(hw, speed); |
| atl1c_start_mac(adapter); |
| if (netif_msg_link(adapter)) |
| dev_info(&pdev->dev, |
| "%s: %s NIC Link is Up<%d Mbps %s>\n", |
| atl1c_driver_name, netdev->name, |
| adapter->link_speed, |
| adapter->link_duplex == FULL_DUPLEX ? |
| "Full Duplex" : "Half Duplex"); |
| } |
| if (!netif_carrier_ok(netdev)) |
| netif_carrier_on(netdev); |
| } |
| } |
| |
| static void atl1c_link_chg_event(struct atl1c_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct pci_dev *pdev = adapter->pdev; |
| u16 phy_data; |
| u16 link_up; |
| |
| spin_lock(&adapter->mdio_lock); |
| atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); |
| atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); |
| spin_unlock(&adapter->mdio_lock); |
| link_up = phy_data & BMSR_LSTATUS; |
| /* notify upper layer link down ASAP */ |
| if (!link_up) { |
| if (netif_carrier_ok(netdev)) { |
| /* old link state: Up */ |
| netif_carrier_off(netdev); |
| if (netif_msg_link(adapter)) |
| dev_info(&pdev->dev, |
| "%s: %s NIC Link is Down\n", |
| atl1c_driver_name, netdev->name); |
| adapter->link_speed = SPEED_0; |
| } |
| } |
| |
| set_bit(ATL1C_WORK_EVENT_LINK_CHANGE, &adapter->work_event); |
| schedule_work(&adapter->common_task); |
| } |
| |
| static void atl1c_common_task(struct work_struct *work) |
| { |
| struct atl1c_adapter *adapter; |
| struct net_device *netdev; |
| |
| adapter = container_of(work, struct atl1c_adapter, common_task); |
| netdev = adapter->netdev; |
| |
| if (test_bit(__AT_DOWN, &adapter->flags)) |
| return; |
| |
| if (test_and_clear_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event)) { |
| netif_device_detach(netdev); |
| atl1c_down(adapter); |
| atl1c_up(adapter); |
| netif_device_attach(netdev); |
| } |
| |
| if (test_and_clear_bit(ATL1C_WORK_EVENT_LINK_CHANGE, |
| &adapter->work_event)) { |
| atl1c_irq_disable(adapter); |
| atl1c_check_link_status(adapter); |
| atl1c_irq_enable(adapter); |
| } |
| } |
| |
| |
| static void atl1c_del_timer(struct atl1c_adapter *adapter) |
| { |
| del_timer_sync(&adapter->phy_config_timer); |
| } |
| |
| |
| /** |
| * atl1c_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| */ |
| static void atl1c_tx_timeout(struct net_device *netdev) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| /* Do the reset outside of interrupt context */ |
| set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event); |
| schedule_work(&adapter->common_task); |
| } |
| |
| /** |
| * atl1c_set_multi - Multicast and Promiscuous mode set |
| * @netdev: network interface device structure |
| * |
| * The set_multi entry point is called whenever the multicast address |
| * list or the network interface flags are updated. This routine is |
| * responsible for configuring the hardware for proper multicast, |
| * promiscuous mode, and all-multi behavior. |
| */ |
| static void atl1c_set_multi(struct net_device *netdev) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| struct atl1c_hw *hw = &adapter->hw; |
| struct netdev_hw_addr *ha; |
| u32 mac_ctrl_data; |
| u32 hash_value; |
| |
| /* Check for Promiscuous and All Multicast modes */ |
| AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data); |
| |
| if (netdev->flags & IFF_PROMISC) { |
| mac_ctrl_data |= MAC_CTRL_PROMIS_EN; |
| } else if (netdev->flags & IFF_ALLMULTI) { |
| mac_ctrl_data |= MAC_CTRL_MC_ALL_EN; |
| mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN; |
| } else { |
| mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); |
| } |
| |
| AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); |
| |
| /* clear the old settings from the multicast hash table */ |
| AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0); |
| AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0); |
| |
| /* comoute mc addresses' hash value ,and put it into hash table */ |
| netdev_for_each_mc_addr(ha, netdev) { |
| hash_value = atl1c_hash_mc_addr(hw, ha->addr); |
| atl1c_hash_set(hw, hash_value); |
| } |
| } |
| |
| static void __atl1c_vlan_mode(netdev_features_t features, u32 *mac_ctrl_data) |
| { |
| if (features & NETIF_F_HW_VLAN_CTAG_RX) { |
| /* enable VLAN tag insert/strip */ |
| *mac_ctrl_data |= MAC_CTRL_RMV_VLAN; |
| } else { |
| /* disable VLAN tag insert/strip */ |
| *mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN; |
| } |
| } |
| |
| static void atl1c_vlan_mode(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| struct pci_dev *pdev = adapter->pdev; |
| u32 mac_ctrl_data = 0; |
| |
| if (netif_msg_pktdata(adapter)) |
| dev_dbg(&pdev->dev, "atl1c_vlan_mode\n"); |
| |
| atl1c_irq_disable(adapter); |
| AT_READ_REG(&adapter->hw, REG_MAC_CTRL, &mac_ctrl_data); |
| __atl1c_vlan_mode(features, &mac_ctrl_data); |
| AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data); |
| atl1c_irq_enable(adapter); |
| } |
| |
| static void atl1c_restore_vlan(struct atl1c_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| |
| if (netif_msg_pktdata(adapter)) |
| dev_dbg(&pdev->dev, "atl1c_restore_vlan\n"); |
| atl1c_vlan_mode(adapter->netdev, adapter->netdev->features); |
| } |
| |
| /** |
| * atl1c_set_mac - Change the Ethernet Address of the NIC |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int atl1c_set_mac_addr(struct net_device *netdev, void *p) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| if (netif_running(netdev)) |
| return -EBUSY; |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); |
| |
| atl1c_hw_set_mac_addr(&adapter->hw, adapter->hw.mac_addr); |
| |
| return 0; |
| } |
| |
| static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter, |
| struct net_device *dev) |
| { |
| unsigned int head_size; |
| int mtu = dev->mtu; |
| |
| adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ? |
| roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE; |
| |
| head_size = SKB_DATA_ALIGN(adapter->rx_buffer_len + NET_SKB_PAD) + |
| SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); |
| adapter->rx_frag_size = roundup_pow_of_two(head_size); |
| } |
| |
| static netdev_features_t atl1c_fix_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| /* |
| * Since there is no support for separate rx/tx vlan accel |
| * enable/disable make sure tx flag is always in same state as rx. |
| */ |
| if (features & NETIF_F_HW_VLAN_CTAG_RX) |
| features |= NETIF_F_HW_VLAN_CTAG_TX; |
| else |
| features &= ~NETIF_F_HW_VLAN_CTAG_TX; |
| |
| if (netdev->mtu > MAX_TSO_FRAME_SIZE) |
| features &= ~(NETIF_F_TSO | NETIF_F_TSO6); |
| |
| return features; |
| } |
| |
| static int atl1c_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| netdev_features_t changed = netdev->features ^ features; |
| |
| if (changed & NETIF_F_HW_VLAN_CTAG_RX) |
| atl1c_vlan_mode(netdev, features); |
| |
| return 0; |
| } |
| |
| /** |
| * atl1c_change_mtu - Change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int atl1c_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| struct atl1c_hw *hw = &adapter->hw; |
| int old_mtu = netdev->mtu; |
| int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
| |
| /* Fast Ethernet controller doesn't support jumbo packet */ |
| if (((hw->nic_type == athr_l2c || |
| hw->nic_type == athr_l2c_b || |
| hw->nic_type == athr_l2c_b2) && new_mtu > ETH_DATA_LEN) || |
| max_frame < ETH_ZLEN + ETH_FCS_LEN || |
| max_frame > MAX_JUMBO_FRAME_SIZE) { |
| if (netif_msg_link(adapter)) |
| dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); |
| return -EINVAL; |
| } |
| /* set MTU */ |
| if (old_mtu != new_mtu && netif_running(netdev)) { |
| while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) |
| msleep(1); |
| netdev->mtu = new_mtu; |
| adapter->hw.max_frame_size = new_mtu; |
| atl1c_set_rxbufsize(adapter, netdev); |
| atl1c_down(adapter); |
| netdev_update_features(netdev); |
| atl1c_up(adapter); |
| clear_bit(__AT_RESETTING, &adapter->flags); |
| } |
| return 0; |
| } |
| |
| /* |
| * caller should hold mdio_lock |
| */ |
| static int atl1c_mdio_read(struct net_device *netdev, int phy_id, int reg_num) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| u16 result; |
| |
| atl1c_read_phy_reg(&adapter->hw, reg_num, &result); |
| return result; |
| } |
| |
| static void atl1c_mdio_write(struct net_device *netdev, int phy_id, |
| int reg_num, int val) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| atl1c_write_phy_reg(&adapter->hw, reg_num, val); |
| } |
| |
| static int atl1c_mii_ioctl(struct net_device *netdev, |
| struct ifreq *ifr, int cmd) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| struct pci_dev *pdev = adapter->pdev; |
| struct mii_ioctl_data *data = if_mii(ifr); |
| unsigned long flags; |
| int retval = 0; |
| |
| if (!netif_running(netdev)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&adapter->mdio_lock, flags); |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| data->phy_id = 0; |
| break; |
| |
| case SIOCGMIIREG: |
| if (atl1c_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, |
| &data->val_out)) { |
| retval = -EIO; |
| goto out; |
| } |
| break; |
| |
| case SIOCSMIIREG: |
| if (data->reg_num & ~(0x1F)) { |
| retval = -EFAULT; |
| goto out; |
| } |
| |
| dev_dbg(&pdev->dev, "<atl1c_mii_ioctl> write %x %x", |
| data->reg_num, data->val_in); |
| if (atl1c_write_phy_reg(&adapter->hw, |
| data->reg_num, data->val_in)) { |
| retval = -EIO; |
| goto out; |
| } |
| break; |
| |
| default: |
| retval = -EOPNOTSUPP; |
| break; |
| } |
| out: |
| spin_unlock_irqrestore(&adapter->mdio_lock, flags); |
| return retval; |
| } |
| |
| static int atl1c_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| case SIOCGMIIREG: |
| case SIOCSMIIREG: |
| return atl1c_mii_ioctl(netdev, ifr, cmd); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /** |
| * atl1c_alloc_queues - Allocate memory for all rings |
| * @adapter: board private structure to initialize |
| * |
| */ |
| static int atl1c_alloc_queues(struct atl1c_adapter *adapter) |
| { |
| return 0; |
| } |
| |
| static void atl1c_set_mac_type(struct atl1c_hw *hw) |
| { |
| switch (hw->device_id) { |
| case PCI_DEVICE_ID_ATTANSIC_L2C: |
| hw->nic_type = athr_l2c; |
| break; |
| case PCI_DEVICE_ID_ATTANSIC_L1C: |
| hw->nic_type = athr_l1c; |
| break; |
| case PCI_DEVICE_ID_ATHEROS_L2C_B: |
| hw->nic_type = athr_l2c_b; |
| break; |
| case PCI_DEVICE_ID_ATHEROS_L2C_B2: |
| hw->nic_type = athr_l2c_b2; |
| break; |
| case PCI_DEVICE_ID_ATHEROS_L1D: |
| hw->nic_type = athr_l1d; |
| break; |
| case PCI_DEVICE_ID_ATHEROS_L1D_2_0: |
| hw->nic_type = athr_l1d_2; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int atl1c_setup_mac_funcs(struct atl1c_hw *hw) |
| { |
| u32 link_ctrl_data; |
| |
| atl1c_set_mac_type(hw); |
| AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data); |
| |
| hw->ctrl_flags = ATL1C_INTR_MODRT_ENABLE | |
| ATL1C_TXQ_MODE_ENHANCE; |
| hw->ctrl_flags |= ATL1C_ASPM_L0S_SUPPORT | |
| ATL1C_ASPM_L1_SUPPORT; |
| hw->ctrl_flags |= ATL1C_ASPM_CTRL_MON; |
| |
| if (hw->nic_type == athr_l1c || |
| hw->nic_type == athr_l1d || |
| hw->nic_type == athr_l1d_2) |
| hw->link_cap_flags |= ATL1C_LINK_CAP_1000M; |
| return 0; |
| } |
| |
| struct atl1c_platform_patch { |
| u16 pci_did; |
| u8 pci_revid; |
| u16 subsystem_vid; |
| u16 subsystem_did; |
| u32 patch_flag; |
| #define ATL1C_LINK_PATCH 0x1 |
| }; |
| static const struct atl1c_platform_patch plats[] = { |
| {0x2060, 0xC1, 0x1019, 0x8152, 0x1}, |
| {0x2060, 0xC1, 0x1019, 0x2060, 0x1}, |
| {0x2060, 0xC1, 0x1019, 0xE000, 0x1}, |
| {0x2062, 0xC0, 0x1019, 0x8152, 0x1}, |
| {0x2062, 0xC0, 0x1019, 0x2062, 0x1}, |
| {0x2062, 0xC0, 0x1458, 0xE000, 0x1}, |
| {0x2062, 0xC1, 0x1019, 0x8152, 0x1}, |
| {0x2062, 0xC1, 0x1019, 0x2062, 0x1}, |
| {0x2062, 0xC1, 0x1458, 0xE000, 0x1}, |
| {0x2062, 0xC1, 0x1565, 0x2802, 0x1}, |
| {0x2062, 0xC1, 0x1565, 0x2801, 0x1}, |
| {0x1073, 0xC0, 0x1019, 0x8151, 0x1}, |
| {0x1073, 0xC0, 0x1019, 0x1073, 0x1}, |
| {0x1073, 0xC0, 0x1458, 0xE000, 0x1}, |
| {0x1083, 0xC0, 0x1458, 0xE000, 0x1}, |
| {0x1083, 0xC0, 0x1019, 0x8151, 0x1}, |
| {0x1083, 0xC0, 0x1019, 0x1083, 0x1}, |
| {0x1083, 0xC0, 0x1462, 0x7680, 0x1}, |
| {0x1083, 0xC0, 0x1565, 0x2803, 0x1}, |
| {0}, |
| }; |
| |
| static void atl1c_patch_assign(struct atl1c_hw *hw) |
| { |
| struct pci_dev *pdev = hw->adapter->pdev; |
| u32 misc_ctrl; |
| int i = 0; |
| |
| hw->msi_lnkpatch = false; |
| |
| while (plats[i].pci_did != 0) { |
| if (plats[i].pci_did == hw->device_id && |
| plats[i].pci_revid == hw->revision_id && |
| plats[i].subsystem_vid == hw->subsystem_vendor_id && |
| plats[i].subsystem_did == hw->subsystem_id) { |
| if (plats[i].patch_flag & ATL1C_LINK_PATCH) |
| hw->msi_lnkpatch = true; |
| } |
| i++; |
| } |
| |
| if (hw->device_id == PCI_DEVICE_ID_ATHEROS_L2C_B2 && |
| hw->revision_id == L2CB_V21) { |
| /* config acess mode */ |
| pci_write_config_dword(pdev, REG_PCIE_IND_ACC_ADDR, |
| REG_PCIE_DEV_MISC_CTRL); |
| pci_read_config_dword(pdev, REG_PCIE_IND_ACC_DATA, &misc_ctrl); |
| misc_ctrl &= ~0x100; |
| pci_write_config_dword(pdev, REG_PCIE_IND_ACC_ADDR, |
| REG_PCIE_DEV_MISC_CTRL); |
| pci_write_config_dword(pdev, REG_PCIE_IND_ACC_DATA, misc_ctrl); |
| } |
| } |
| /** |
| * atl1c_sw_init - Initialize general software structures (struct atl1c_adapter) |
| * @adapter: board private structure to initialize |
| * |
| * atl1c_sw_init initializes the Adapter private data structure. |
| * Fields are initialized based on PCI device information and |
| * OS network device settings (MTU size). |
| */ |
| static int atl1c_sw_init(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_hw *hw = &adapter->hw; |
| struct pci_dev *pdev = adapter->pdev; |
| u32 revision; |
| |
| |
| adapter->wol = 0; |
| device_set_wakeup_enable(&pdev->dev, false); |
| adapter->link_speed = SPEED_0; |
| adapter->link_duplex = FULL_DUPLEX; |
| adapter->tpd_ring[0].count = 1024; |
| adapter->rfd_ring.count = 512; |
| |
| hw->vendor_id = pdev->vendor; |
| hw->device_id = pdev->device; |
| hw->subsystem_vendor_id = pdev->subsystem_vendor; |
| hw->subsystem_id = pdev->subsystem_device; |
| pci_read_config_dword(pdev, PCI_CLASS_REVISION, &revision); |
| hw->revision_id = revision & 0xFF; |
| /* before link up, we assume hibernate is true */ |
| hw->hibernate = true; |
| hw->media_type = MEDIA_TYPE_AUTO_SENSOR; |
| if (atl1c_setup_mac_funcs(hw) != 0) { |
| dev_err(&pdev->dev, "set mac function pointers failed\n"); |
| return -1; |
| } |
| atl1c_patch_assign(hw); |
| |
| hw->intr_mask = IMR_NORMAL_MASK; |
| hw->phy_configured = false; |
| hw->preamble_len = 7; |
| hw->max_frame_size = adapter->netdev->mtu; |
| hw->autoneg_advertised = ADVERTISED_Autoneg; |
| hw->indirect_tab = 0xE4E4E4E4; |
| hw->base_cpu = 0; |
| |
| hw->ict = 50000; /* 100ms */ |
| hw->smb_timer = 200000; /* 400ms */ |
| hw->rx_imt = 200; |
| hw->tx_imt = 1000; |
| |
| hw->tpd_burst = 5; |
| hw->rfd_burst = 8; |
| hw->dma_order = atl1c_dma_ord_out; |
| hw->dmar_block = atl1c_dma_req_1024; |
| |
| if (atl1c_alloc_queues(adapter)) { |
| dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); |
| return -ENOMEM; |
| } |
| /* TODO */ |
| atl1c_set_rxbufsize(adapter, adapter->netdev); |
| atomic_set(&adapter->irq_sem, 1); |
| spin_lock_init(&adapter->mdio_lock); |
| spin_lock_init(&adapter->tx_lock); |
| set_bit(__AT_DOWN, &adapter->flags); |
| |
| return 0; |
| } |
| |
| static inline void atl1c_clean_buffer(struct pci_dev *pdev, |
| struct atl1c_buffer *buffer_info, int in_irq) |
| { |
| u16 pci_driection; |
| if (buffer_info->flags & ATL1C_BUFFER_FREE) |
| return; |
| if (buffer_info->dma) { |
| if (buffer_info->flags & ATL1C_PCIMAP_FROMDEVICE) |
| pci_driection = PCI_DMA_FROMDEVICE; |
| else |
| pci_driection = PCI_DMA_TODEVICE; |
| |
| if (buffer_info->flags & ATL1C_PCIMAP_SINGLE) |
| pci_unmap_single(pdev, buffer_info->dma, |
| buffer_info->length, pci_driection); |
| else if (buffer_info->flags & ATL1C_PCIMAP_PAGE) |
| pci_unmap_page(pdev, buffer_info->dma, |
| buffer_info->length, pci_driection); |
| } |
| if (buffer_info->skb) { |
| if (in_irq) |
| dev_kfree_skb_irq(buffer_info->skb); |
| else |
| dev_kfree_skb(buffer_info->skb); |
| } |
| buffer_info->dma = 0; |
| buffer_info->skb = NULL; |
| ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE); |
| } |
| /** |
| * atl1c_clean_tx_ring - Free Tx-skb |
| * @adapter: board private structure |
| */ |
| static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter, |
| enum atl1c_trans_queue type) |
| { |
| struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; |
| struct atl1c_buffer *buffer_info; |
| struct pci_dev *pdev = adapter->pdev; |
| u16 index, ring_count; |
| |
| ring_count = tpd_ring->count; |
| for (index = 0; index < ring_count; index++) { |
| buffer_info = &tpd_ring->buffer_info[index]; |
| atl1c_clean_buffer(pdev, buffer_info, 0); |
| } |
| |
| /* Zero out Tx-buffers */ |
| memset(tpd_ring->desc, 0, sizeof(struct atl1c_tpd_desc) * |
| ring_count); |
| atomic_set(&tpd_ring->next_to_clean, 0); |
| tpd_ring->next_to_use = 0; |
| } |
| |
| /** |
| * atl1c_clean_rx_ring - Free rx-reservation skbs |
| * @adapter: board private structure |
| */ |
| static void atl1c_clean_rx_ring(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1c_buffer *buffer_info; |
| struct pci_dev *pdev = adapter->pdev; |
| int j; |
| |
| for (j = 0; j < rfd_ring->count; j++) { |
| buffer_info = &rfd_ring->buffer_info[j]; |
| atl1c_clean_buffer(pdev, buffer_info, 0); |
| } |
| /* zero out the descriptor ring */ |
| memset(rfd_ring->desc, 0, rfd_ring->size); |
| rfd_ring->next_to_clean = 0; |
| rfd_ring->next_to_use = 0; |
| rrd_ring->next_to_use = 0; |
| rrd_ring->next_to_clean = 0; |
| } |
| |
| /* |
| * Read / Write Ptr Initialize: |
| */ |
| static void atl1c_init_ring_ptrs(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; |
| struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1c_buffer *buffer_info; |
| int i, j; |
| |
| for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { |
| tpd_ring[i].next_to_use = 0; |
| atomic_set(&tpd_ring[i].next_to_clean, 0); |
| buffer_info = tpd_ring[i].buffer_info; |
| for (j = 0; j < tpd_ring->count; j++) |
| ATL1C_SET_BUFFER_STATE(&buffer_info[i], |
| ATL1C_BUFFER_FREE); |
| } |
| rfd_ring->next_to_use = 0; |
| rfd_ring->next_to_clean = 0; |
| rrd_ring->next_to_use = 0; |
| rrd_ring->next_to_clean = 0; |
| for (j = 0; j < rfd_ring->count; j++) { |
| buffer_info = &rfd_ring->buffer_info[j]; |
| ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE); |
| } |
| } |
| |
| /** |
| * atl1c_free_ring_resources - Free Tx / RX descriptor Resources |
| * @adapter: board private structure |
| * |
| * Free all transmit software resources |
| */ |
| static void atl1c_free_ring_resources(struct atl1c_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| |
| pci_free_consistent(pdev, adapter->ring_header.size, |
| adapter->ring_header.desc, |
| adapter->ring_header.dma); |
| adapter->ring_header.desc = NULL; |
| |
| /* Note: just free tdp_ring.buffer_info, |
| * it contain rfd_ring.buffer_info, do not double free */ |
| if (adapter->tpd_ring[0].buffer_info) { |
| kfree(adapter->tpd_ring[0].buffer_info); |
| adapter->tpd_ring[0].buffer_info = NULL; |
| } |
| if (adapter->rx_page) { |
| put_page(adapter->rx_page); |
| adapter->rx_page = NULL; |
| } |
| } |
| |
| /** |
| * atl1c_setup_mem_resources - allocate Tx / RX descriptor resources |
| * @adapter: board private structure |
| * |
| * Return 0 on success, negative on failure |
| */ |
| static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; |
| struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1c_ring_header *ring_header = &adapter->ring_header; |
| int size; |
| int i; |
| int count = 0; |
| int rx_desc_count = 0; |
| u32 offset = 0; |
| |
| rrd_ring->count = rfd_ring->count; |
| for (i = 1; i < AT_MAX_TRANSMIT_QUEUE; i++) |
| tpd_ring[i].count = tpd_ring[0].count; |
| |
| /* 2 tpd queue, one high priority queue, |
| * another normal priority queue */ |
| size = sizeof(struct atl1c_buffer) * (tpd_ring->count * 2 + |
| rfd_ring->count); |
| tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); |
| if (unlikely(!tpd_ring->buffer_info)) |
| goto err_nomem; |
| |
| for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { |
| tpd_ring[i].buffer_info = |
| (tpd_ring->buffer_info + count); |
| count += tpd_ring[i].count; |
| } |
| |
| rfd_ring->buffer_info = |
| (tpd_ring->buffer_info + count); |
| count += rfd_ring->count; |
| rx_desc_count += rfd_ring->count; |
| |
| /* |
| * real ring DMA buffer |
| * each ring/block may need up to 8 bytes for alignment, hence the |
| * additional bytes tacked onto the end. |
| */ |
| ring_header->size = size = |
| sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 + |
| sizeof(struct atl1c_rx_free_desc) * rx_desc_count + |
| sizeof(struct atl1c_recv_ret_status) * rx_desc_count + |
| 8 * 4; |
| |
| ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, |
| &ring_header->dma); |
| if (unlikely(!ring_header->desc)) { |
| dev_err(&pdev->dev, "pci_alloc_consistend failed\n"); |
| goto err_nomem; |
| } |
| memset(ring_header->desc, 0, ring_header->size); |
| /* init TPD ring */ |
| |
| tpd_ring[0].dma = roundup(ring_header->dma, 8); |
| offset = tpd_ring[0].dma - ring_header->dma; |
| for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { |
| tpd_ring[i].dma = ring_header->dma + offset; |
| tpd_ring[i].desc = (u8 *) ring_header->desc + offset; |
| tpd_ring[i].size = |
| sizeof(struct atl1c_tpd_desc) * tpd_ring[i].count; |
| offset += roundup(tpd_ring[i].size, 8); |
| } |
| /* init RFD ring */ |
| rfd_ring->dma = ring_header->dma + offset; |
| rfd_ring->desc = (u8 *) ring_header->desc + offset; |
| rfd_ring->size = sizeof(struct atl1c_rx_free_desc) * rfd_ring->count; |
| offset += roundup(rfd_ring->size, 8); |
| |
| /* init RRD ring */ |
| rrd_ring->dma = ring_header->dma + offset; |
| rrd_ring->desc = (u8 *) ring_header->desc + offset; |
| rrd_ring->size = sizeof(struct atl1c_recv_ret_status) * |
| rrd_ring->count; |
| offset += roundup(rrd_ring->size, 8); |
| |
| return 0; |
| |
| err_nomem: |
| kfree(tpd_ring->buffer_info); |
| return -ENOMEM; |
| } |
| |
| static void atl1c_configure_des_ring(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_hw *hw = &adapter->hw; |
| struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *) |
| adapter->tpd_ring; |
| |
| /* TPD */ |
| AT_WRITE_REG(hw, REG_TX_BASE_ADDR_HI, |
| (u32)((tpd_ring[atl1c_trans_normal].dma & |
| AT_DMA_HI_ADDR_MASK) >> 32)); |
| /* just enable normal priority TX queue */ |
| AT_WRITE_REG(hw, REG_TPD_PRI0_ADDR_LO, |
| (u32)(tpd_ring[atl1c_trans_normal].dma & |
| AT_DMA_LO_ADDR_MASK)); |
| AT_WRITE_REG(hw, REG_TPD_PRI1_ADDR_LO, |
| (u32)(tpd_ring[atl1c_trans_high].dma & |
| AT_DMA_LO_ADDR_MASK)); |
| AT_WRITE_REG(hw, REG_TPD_RING_SIZE, |
| (u32)(tpd_ring[0].count & TPD_RING_SIZE_MASK)); |
| |
| |
| /* RFD */ |
| AT_WRITE_REG(hw, REG_RX_BASE_ADDR_HI, |
| (u32)((rfd_ring->dma & AT_DMA_HI_ADDR_MASK) >> 32)); |
| AT_WRITE_REG(hw, REG_RFD0_HEAD_ADDR_LO, |
| (u32)(rfd_ring->dma & AT_DMA_LO_ADDR_MASK)); |
| |
| AT_WRITE_REG(hw, REG_RFD_RING_SIZE, |
| rfd_ring->count & RFD_RING_SIZE_MASK); |
| AT_WRITE_REG(hw, REG_RX_BUF_SIZE, |
| adapter->rx_buffer_len & RX_BUF_SIZE_MASK); |
| |
| /* RRD */ |
| AT_WRITE_REG(hw, REG_RRD0_HEAD_ADDR_LO, |
| (u32)(rrd_ring->dma & AT_DMA_LO_ADDR_MASK)); |
| AT_WRITE_REG(hw, REG_RRD_RING_SIZE, |
| (rrd_ring->count & RRD_RING_SIZE_MASK)); |
| |
| if (hw->nic_type == athr_l2c_b) { |
| AT_WRITE_REG(hw, REG_SRAM_RXF_LEN, 0x02a0L); |
| AT_WRITE_REG(hw, REG_SRAM_TXF_LEN, 0x0100L); |
| AT_WRITE_REG(hw, REG_SRAM_RXF_ADDR, 0x029f0000L); |
| AT_WRITE_REG(hw, REG_SRAM_RFD0_INFO, 0x02bf02a0L); |
| AT_WRITE_REG(hw, REG_SRAM_TXF_ADDR, 0x03bf02c0L); |
| AT_WRITE_REG(hw, REG_SRAM_TRD_ADDR, 0x03df03c0L); |
| AT_WRITE_REG(hw, REG_TXF_WATER_MARK, 0); /* TX watermark, to enter l1 state.*/ |
| AT_WRITE_REG(hw, REG_RXD_DMA_CTRL, 0); /* RXD threshold.*/ |
| } |
| /* Load all of base address above */ |
| AT_WRITE_REG(hw, REG_LOAD_PTR, 1); |
| } |
| |
| static void atl1c_configure_tx(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_hw *hw = &adapter->hw; |
| int max_pay_load; |
| u16 tx_offload_thresh; |
| u32 txq_ctrl_data; |
| |
| tx_offload_thresh = MAX_TSO_FRAME_SIZE; |
| AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH, |
| (tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK); |
| max_pay_load = pcie_get_readrq(adapter->pdev) >> 8; |
| hw->dmar_block = min_t(u32, max_pay_load, hw->dmar_block); |
| /* |
| * if BIOS had changed the dam-read-max-length to an invalid value, |
| * restore it to default value |
| */ |
| if (hw->dmar_block < DEVICE_CTRL_MAXRRS_MIN) { |
| pcie_set_readrq(adapter->pdev, 128 << DEVICE_CTRL_MAXRRS_MIN); |
| hw->dmar_block = DEVICE_CTRL_MAXRRS_MIN; |
| } |
| txq_ctrl_data = |
| hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 ? |
| L2CB_TXQ_CFGV : L1C_TXQ_CFGV; |
| |
| AT_WRITE_REG(hw, REG_TXQ_CTRL, txq_ctrl_data); |
| } |
| |
| static void atl1c_configure_rx(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_hw *hw = &adapter->hw; |
| u32 rxq_ctrl_data; |
| |
| rxq_ctrl_data = (hw->rfd_burst & RXQ_RFD_BURST_NUM_MASK) << |
| RXQ_RFD_BURST_NUM_SHIFT; |
| |
| if (hw->ctrl_flags & ATL1C_RX_IPV6_CHKSUM) |
| rxq_ctrl_data |= IPV6_CHKSUM_CTRL_EN; |
| |
| /* aspm for gigabit */ |
| if (hw->nic_type != athr_l1d_2 && (hw->device_id & 1) != 0) |
| rxq_ctrl_data = FIELD_SETX(rxq_ctrl_data, ASPM_THRUPUT_LIMIT, |
| ASPM_THRUPUT_LIMIT_100M); |
| |
| AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data); |
| } |
| |
| static void atl1c_configure_dma(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_hw *hw = &adapter->hw; |
| u32 dma_ctrl_data; |
| |
| dma_ctrl_data = FIELDX(DMA_CTRL_RORDER_MODE, DMA_CTRL_RORDER_MODE_OUT) | |
| DMA_CTRL_RREQ_PRI_DATA | |
| FIELDX(DMA_CTRL_RREQ_BLEN, hw->dmar_block) | |
| FIELDX(DMA_CTRL_WDLY_CNT, DMA_CTRL_WDLY_CNT_DEF) | |
| FIELDX(DMA_CTRL_RDLY_CNT, DMA_CTRL_RDLY_CNT_DEF); |
| |
| AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data); |
| } |
| |
| /* |
| * Stop the mac, transmit and receive units |
| * hw - Struct containing variables accessed by shared code |
| * return : 0 or idle status (if error) |
| */ |
| static int atl1c_stop_mac(struct atl1c_hw *hw) |
| { |
| u32 data; |
| |
| AT_READ_REG(hw, REG_RXQ_CTRL, &data); |
| data &= ~RXQ_CTRL_EN; |
| AT_WRITE_REG(hw, REG_RXQ_CTRL, data); |
| |
| AT_READ_REG(hw, REG_TXQ_CTRL, &data); |
| data &= ~TXQ_CTRL_EN; |
| AT_WRITE_REG(hw, REG_TXQ_CTRL, data); |
| |
| atl1c_wait_until_idle(hw, IDLE_STATUS_RXQ_BUSY | IDLE_STATUS_TXQ_BUSY); |
| |
| AT_READ_REG(hw, REG_MAC_CTRL, &data); |
| data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN); |
| AT_WRITE_REG(hw, REG_MAC_CTRL, data); |
| |
| return (int)atl1c_wait_until_idle(hw, |
| IDLE_STATUS_TXMAC_BUSY | IDLE_STATUS_RXMAC_BUSY); |
| } |
| |
| static void atl1c_start_mac(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_hw *hw = &adapter->hw; |
| u32 mac, txq, rxq; |
| |
| hw->mac_duplex = adapter->link_duplex == FULL_DUPLEX ? true : false; |
| hw->mac_speed = adapter->link_speed == SPEED_1000 ? |
| atl1c_mac_speed_1000 : atl1c_mac_speed_10_100; |
| |
| AT_READ_REG(hw, REG_TXQ_CTRL, &txq); |
| AT_READ_REG(hw, REG_RXQ_CTRL, &rxq); |
| AT_READ_REG(hw, REG_MAC_CTRL, &mac); |
| |
| txq |= TXQ_CTRL_EN; |
| rxq |= RXQ_CTRL_EN; |
| mac |= MAC_CTRL_TX_EN | MAC_CTRL_TX_FLOW | |
| MAC_CTRL_RX_EN | MAC_CTRL_RX_FLOW | |
| MAC_CTRL_ADD_CRC | MAC_CTRL_PAD | |
| MAC_CTRL_BC_EN | MAC_CTRL_SINGLE_PAUSE_EN | |
| MAC_CTRL_HASH_ALG_CRC32; |
| if (hw->mac_duplex) |
| mac |= MAC_CTRL_DUPLX; |
| else |
| mac &= ~MAC_CTRL_DUPLX; |
| mac = FIELD_SETX(mac, MAC_CTRL_SPEED, hw->mac_speed); |
| mac = FIELD_SETX(mac, MAC_CTRL_PRMLEN, hw->preamble_len); |
| |
| AT_WRITE_REG(hw, REG_TXQ_CTRL, txq); |
| AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq); |
| AT_WRITE_REG(hw, REG_MAC_CTRL, mac); |
| } |
| |
| /* |
| * Reset the transmit and receive units; mask and clear all interrupts. |
| * hw - Struct containing variables accessed by shared code |
| * return : 0 or idle status (if error) |
| */ |
| static int atl1c_reset_mac(struct atl1c_hw *hw) |
| { |
| struct atl1c_adapter *adapter = hw->adapter; |
| struct pci_dev *pdev = adapter->pdev; |
| u32 ctrl_data = 0; |
| |
| atl1c_stop_mac(hw); |
| /* |
| * Issue Soft Reset to the MAC. This will reset the chip's |
| * transmit, receive, DMA. It will not effect |
| * the current PCI configuration. The global reset bit is self- |
| * clearing, and should clear within a microsecond. |
| */ |
| AT_READ_REG(hw, REG_MASTER_CTRL, &ctrl_data); |
| ctrl_data |= MASTER_CTRL_OOB_DIS; |
| AT_WRITE_REG(hw, REG_MASTER_CTRL, ctrl_data | MASTER_CTRL_SOFT_RST); |
| |
| AT_WRITE_FLUSH(hw); |
| msleep(10); |
| /* Wait at least 10ms for All module to be Idle */ |
| |
| if (atl1c_wait_until_idle(hw, IDLE_STATUS_MASK)) { |
| dev_err(&pdev->dev, |
| "MAC state machine can't be idle since" |
| " disabled for 10ms second\n"); |
| return -1; |
| } |
| AT_WRITE_REG(hw, REG_MASTER_CTRL, ctrl_data); |
| |
| /* driver control speed/duplex */ |
| AT_READ_REG(hw, REG_MAC_CTRL, &ctrl_data); |
| AT_WRITE_REG(hw, REG_MAC_CTRL, ctrl_data | MAC_CTRL_SPEED_MODE_SW); |
| |
| /* clk switch setting */ |
| AT_READ_REG(hw, REG_SERDES, &ctrl_data); |
| switch (hw->nic_type) { |
| case athr_l2c_b: |
| ctrl_data &= ~(SERDES_PHY_CLK_SLOWDOWN | |
| SERDES_MAC_CLK_SLOWDOWN); |
| AT_WRITE_REG(hw, REG_SERDES, ctrl_data); |
| break; |
| case athr_l2c_b2: |
| case athr_l1d_2: |
| ctrl_data |= SERDES_PHY_CLK_SLOWDOWN | SERDES_MAC_CLK_SLOWDOWN; |
| AT_WRITE_REG(hw, REG_SERDES, ctrl_data); |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void atl1c_disable_l0s_l1(struct atl1c_hw *hw) |
| { |
| u16 ctrl_flags = hw->ctrl_flags; |
| |
| hw->ctrl_flags &= ~(ATL1C_ASPM_L0S_SUPPORT | ATL1C_ASPM_L1_SUPPORT); |
| atl1c_set_aspm(hw, SPEED_0); |
| hw->ctrl_flags = ctrl_flags; |
| } |
| |
| /* |
| * Set ASPM state. |
| * Enable/disable L0s/L1 depend on link state. |
| */ |
| static void atl1c_set_aspm(struct atl1c_hw *hw, u16 link_speed) |
| { |
| u32 pm_ctrl_data; |
| u32 link_l1_timer; |
| |
| AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data); |
| pm_ctrl_data &= ~(PM_CTRL_ASPM_L1_EN | |
| PM_CTRL_ASPM_L0S_EN | |
| PM_CTRL_MAC_ASPM_CHK); |
| /* L1 timer */ |
| if (hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) { |
| pm_ctrl_data &= ~PMCTRL_TXL1_AFTER_L0S; |
| link_l1_timer = |
| link_speed == SPEED_1000 || link_speed == SPEED_100 ? |
| L1D_PMCTRL_L1_ENTRY_TM_16US : 1; |
| pm_ctrl_data = FIELD_SETX(pm_ctrl_data, |
| L1D_PMCTRL_L1_ENTRY_TM, link_l1_timer); |
| } else { |
| link_l1_timer = hw->nic_type == athr_l2c_b ? |
| L2CB1_PM_CTRL_L1_ENTRY_TM : L1C_PM_CTRL_L1_ENTRY_TM; |
| if (link_speed != SPEED_1000 && link_speed != SPEED_100) |
| link_l1_timer = 1; |
| pm_ctrl_data = FIELD_SETX(pm_ctrl_data, |
| PM_CTRL_L1_ENTRY_TIMER, link_l1_timer); |
| } |
| |
| /* L0S/L1 enable */ |
| if ((hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT) && link_speed != SPEED_0) |
| pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN | PM_CTRL_MAC_ASPM_CHK; |
| if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) |
| pm_ctrl_data |= PM_CTRL_ASPM_L1_EN | PM_CTRL_MAC_ASPM_CHK; |
| |
| /* l2cb & l1d & l2cb2 & l1d2 */ |
| if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l1d || |
| hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) { |
| pm_ctrl_data = FIELD_SETX(pm_ctrl_data, |
| PM_CTRL_PM_REQ_TIMER, PM_CTRL_PM_REQ_TO_DEF); |
| pm_ctrl_data |= PM_CTRL_RCVR_WT_TIMER | |
| PM_CTRL_SERDES_PD_EX_L1 | |
| PM_CTRL_CLK_SWH_L1; |
| pm_ctrl_data &= ~(PM_CTRL_SERDES_L1_EN | |
| PM_CTRL_SERDES_PLL_L1_EN | |
| PM_CTRL_SERDES_BUFS_RX_L1_EN | |
| PM_CTRL_SA_DLY_EN | |
| PM_CTRL_HOTRST); |
| /* disable l0s if link down or l2cb */ |
| if (link_speed == SPEED_0 || hw->nic_type == athr_l2c_b) |
| pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; |
| } else { /* l1c */ |
| pm_ctrl_data = |
| FIELD_SETX(pm_ctrl_data, PM_CTRL_L1_ENTRY_TIMER, 0); |
| if (link_speed != SPEED_0) { |
| pm_ctrl_data |= PM_CTRL_SERDES_L1_EN | |
| PM_CTRL_SERDES_PLL_L1_EN | |
| PM_CTRL_SERDES_BUFS_RX_L1_EN; |
| pm_ctrl_data &= ~(PM_CTRL_SERDES_PD_EX_L1 | |
| PM_CTRL_CLK_SWH_L1 | |
| PM_CTRL_ASPM_L0S_EN | |
| PM_CTRL_ASPM_L1_EN); |
| } else { /* link down */ |
| pm_ctrl_data |= PM_CTRL_CLK_SWH_L1; |
| pm_ctrl_data &= ~(PM_CTRL_SERDES_L1_EN | |
| PM_CTRL_SERDES_PLL_L1_EN | |
| PM_CTRL_SERDES_BUFS_RX_L1_EN | |
| PM_CTRL_ASPM_L0S_EN); |
| } |
| } |
| AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data); |
| |
| return; |
| } |
| |
| /** |
| * atl1c_configure - Configure Transmit&Receive Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Tx /Rx unit of the MAC after a reset. |
| */ |
| static int atl1c_configure_mac(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_hw *hw = &adapter->hw; |
| u32 master_ctrl_data = 0; |
| u32 intr_modrt_data; |
| u32 data; |
| |
| AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data); |
| master_ctrl_data &= ~(MASTER_CTRL_TX_ITIMER_EN | |
| MASTER_CTRL_RX_ITIMER_EN | |
| MASTER_CTRL_INT_RDCLR); |
| /* clear interrupt status */ |
| AT_WRITE_REG(hw, REG_ISR, 0xFFFFFFFF); |
| /* Clear any WOL status */ |
| AT_WRITE_REG(hw, REG_WOL_CTRL, 0); |
| /* set Interrupt Clear Timer |
| * HW will enable self to assert interrupt event to system after |
| * waiting x-time for software to notify it accept interrupt. |
| */ |
| |
| data = CLK_GATING_EN_ALL; |
| if (hw->ctrl_flags & ATL1C_CLK_GATING_EN) { |
| if (hw->nic_type == athr_l2c_b) |
| data &= ~CLK_GATING_RXMAC_EN; |
| } else |
| data = 0; |
| AT_WRITE_REG(hw, REG_CLK_GATING_CTRL, data); |
| |
| AT_WRITE_REG(hw, REG_INT_RETRIG_TIMER, |
| hw->ict & INT_RETRIG_TIMER_MASK); |
| |
| atl1c_configure_des_ring(adapter); |
| |
| if (hw->ctrl_flags & ATL1C_INTR_MODRT_ENABLE) { |
| intr_modrt_data = (hw->tx_imt & IRQ_MODRT_TIMER_MASK) << |
| IRQ_MODRT_TX_TIMER_SHIFT; |
| intr_modrt_data |= (hw->rx_imt & IRQ_MODRT_TIMER_MASK) << |
| IRQ_MODRT_RX_TIMER_SHIFT; |
| AT_WRITE_REG(hw, REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data); |
| master_ctrl_data |= |
| MASTER_CTRL_TX_ITIMER_EN | MASTER_CTRL_RX_ITIMER_EN; |
| } |
| |
| if (hw->ctrl_flags & ATL1C_INTR_CLEAR_ON_READ) |
| master_ctrl_data |= MASTER_CTRL_INT_RDCLR; |
| |
| master_ctrl_data |= MASTER_CTRL_SA_TIMER_EN; |
| AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); |
| |
| AT_WRITE_REG(hw, REG_SMB_STAT_TIMER, |
| hw->smb_timer & SMB_STAT_TIMER_MASK); |
| |
| /* set MTU */ |
| AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN + |
| VLAN_HLEN + ETH_FCS_LEN); |
| |
| atl1c_configure_tx(adapter); |
| atl1c_configure_rx(adapter); |
| atl1c_configure_dma(adapter); |
| |
| return 0; |
| } |
| |
| static int atl1c_configure(struct atl1c_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int num; |
| |
| atl1c_init_ring_ptrs(adapter); |
| atl1c_set_multi(netdev); |
| atl1c_restore_vlan(adapter); |
| |
| num = atl1c_alloc_rx_buffer(adapter); |
| if (unlikely(num == 0)) |
| return -ENOMEM; |
| |
| if (atl1c_configure_mac(adapter)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static void atl1c_update_hw_stats(struct atl1c_adapter *adapter) |
| { |
| u16 hw_reg_addr = 0; |
| unsigned long *stats_item = NULL; |
| u32 data; |
| |
| /* update rx status */ |
| hw_reg_addr = REG_MAC_RX_STATUS_BIN; |
| stats_item = &adapter->hw_stats.rx_ok; |
| while (hw_reg_addr <= REG_MAC_RX_STATUS_END) { |
| AT_READ_REG(&adapter->hw, hw_reg_addr, &data); |
| *stats_item += data; |
| stats_item++; |
| hw_reg_addr += 4; |
| } |
| /* update tx status */ |
| hw_reg_addr = REG_MAC_TX_STATUS_BIN; |
| stats_item = &adapter->hw_stats.tx_ok; |
| while (hw_reg_addr <= REG_MAC_TX_STATUS_END) { |
| AT_READ_REG(&adapter->hw, hw_reg_addr, &data); |
| *stats_item += data; |
| stats_item++; |
| hw_reg_addr += 4; |
| } |
| } |
| |
| /** |
| * atl1c_get_stats - Get System Network Statistics |
| * @netdev: network interface device structure |
| * |
| * Returns the address of the device statistics structure. |
| * The statistics are actually updated from the timer callback. |
| */ |
| static struct net_device_stats *atl1c_get_stats(struct net_device *netdev) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| struct atl1c_hw_stats *hw_stats = &adapter->hw_stats; |
| struct net_device_stats *net_stats = &netdev->stats; |
| |
| atl1c_update_hw_stats(adapter); |
| net_stats->rx_packets = hw_stats->rx_ok; |
| net_stats->tx_packets = hw_stats->tx_ok; |
| net_stats->rx_bytes = hw_stats->rx_byte_cnt; |
| net_stats->tx_bytes = hw_stats->tx_byte_cnt; |
| net_stats->multicast = hw_stats->rx_mcast; |
| net_stats->collisions = hw_stats->tx_1_col + |
| hw_stats->tx_2_col * 2 + |
| hw_stats->tx_late_col + hw_stats->tx_abort_col; |
| net_stats->rx_errors = hw_stats->rx_frag + hw_stats->rx_fcs_err + |
| hw_stats->rx_len_err + hw_stats->rx_sz_ov + |
| hw_stats->rx_rrd_ov + hw_stats->rx_align_err; |
| net_stats->rx_fifo_errors = hw_stats->rx_rxf_ov; |
| net_stats->rx_length_errors = hw_stats->rx_len_err; |
| net_stats->rx_crc_errors = hw_stats->rx_fcs_err; |
| net_stats->rx_frame_errors = hw_stats->rx_align_err; |
| net_stats->rx_over_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; |
| |
| net_stats->rx_missed_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; |
| |
| net_stats->tx_errors = hw_stats->tx_late_col + hw_stats->tx_abort_col + |
| hw_stats->tx_underrun + hw_stats->tx_trunc; |
| net_stats->tx_fifo_errors = hw_stats->tx_underrun; |
| net_stats->tx_aborted_errors = hw_stats->tx_abort_col; |
| net_stats->tx_window_errors = hw_stats->tx_late_col; |
| |
| return net_stats; |
| } |
| |
| static inline void atl1c_clear_phy_int(struct atl1c_adapter *adapter) |
| { |
| u16 phy_data; |
| |
| spin_lock(&adapter->mdio_lock); |
| atl1c_read_phy_reg(&adapter->hw, MII_ISR, &phy_data); |
| spin_unlock(&adapter->mdio_lock); |
| } |
| |
| static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter, |
| enum atl1c_trans_queue type) |
| { |
| struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; |
| struct atl1c_buffer *buffer_info; |
| struct pci_dev *pdev = adapter->pdev; |
| u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); |
| u16 hw_next_to_clean; |
| u16 reg; |
| |
| reg = type == atl1c_trans_high ? REG_TPD_PRI1_CIDX : REG_TPD_PRI0_CIDX; |
| |
| AT_READ_REGW(&adapter->hw, reg, &hw_next_to_clean); |
| |
| while (next_to_clean != hw_next_to_clean) { |
| buffer_info = &tpd_ring->buffer_info[next_to_clean]; |
| atl1c_clean_buffer(pdev, buffer_info, 1); |
| if (++next_to_clean == tpd_ring->count) |
| next_to_clean = 0; |
| atomic_set(&tpd_ring->next_to_clean, next_to_clean); |
| } |
| |
| if (netif_queue_stopped(adapter->netdev) && |
| netif_carrier_ok(adapter->netdev)) { |
| netif_wake_queue(adapter->netdev); |
| } |
| |
| return true; |
| } |
| |
| /** |
| * atl1c_intr - Interrupt Handler |
| * @irq: interrupt number |
| * @data: pointer to a network interface device structure |
| */ |
| static irqreturn_t atl1c_intr(int irq, void *data) |
| { |
| struct net_device *netdev = data; |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| struct pci_dev *pdev = adapter->pdev; |
| struct atl1c_hw *hw = &adapter->hw; |
| int max_ints = AT_MAX_INT_WORK; |
| int handled = IRQ_NONE; |
| u32 status; |
| u32 reg_data; |
| |
| do { |
| AT_READ_REG(hw, REG_ISR, ®_data); |
| status = reg_data & hw->intr_mask; |
| |
| if (status == 0 || (status & ISR_DIS_INT) != 0) { |
| if (max_ints != AT_MAX_INT_WORK) |
| handled = IRQ_HANDLED; |
| break; |
| } |
| /* link event */ |
| if (status & ISR_GPHY) |
| atl1c_clear_phy_int(adapter); |
| /* Ack ISR */ |
| AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT); |
| if (status & ISR_RX_PKT) { |
| if (likely(napi_schedule_prep(&adapter->napi))) { |
| hw->intr_mask &= ~ISR_RX_PKT; |
| AT_WRITE_REG(hw, REG_IMR, hw->intr_mask); |
| __napi_schedule(&adapter->napi); |
| } |
| } |
| if (status & ISR_TX_PKT) |
| atl1c_clean_tx_irq(adapter, atl1c_trans_normal); |
| |
| handled = IRQ_HANDLED; |
| /* check if PCIE PHY Link down */ |
| if (status & ISR_ERROR) { |
| if (netif_msg_hw(adapter)) |
| dev_err(&pdev->dev, |
| "atl1c hardware error (status = 0x%x)\n", |
| status & ISR_ERROR); |
| /* reset MAC */ |
| set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event); |
| schedule_work(&adapter->common_task); |
| return IRQ_HANDLED; |
| } |
| |
| if (status & ISR_OVER) |
| if (netif_msg_intr(adapter)) |
| dev_warn(&pdev->dev, |
| "TX/RX overflow (status = 0x%x)\n", |
| status & ISR_OVER); |
| |
| /* link event */ |
| if (status & (ISR_GPHY | ISR_MANUAL)) { |
| netdev->stats.tx_carrier_errors++; |
| atl1c_link_chg_event(adapter); |
| break; |
| } |
| |
| } while (--max_ints > 0); |
| /* re-enable Interrupt*/ |
| AT_WRITE_REG(&adapter->hw, REG_ISR, 0); |
| return handled; |
| } |
| |
| static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter, |
| struct sk_buff *skb, struct atl1c_recv_ret_status *prrs) |
| { |
| /* |
| * The pid field in RRS in not correct sometimes, so we |
| * cannot figure out if the packet is fragmented or not, |
| * so we tell the KERNEL CHECKSUM_NONE |
| */ |
| skb_checksum_none_assert(skb); |
| } |
| |
| static struct sk_buff *atl1c_alloc_skb(struct atl1c_adapter *adapter) |
| { |
| struct sk_buff *skb; |
| struct page *page; |
| |
| if (adapter->rx_frag_size > PAGE_SIZE) |
| return netdev_alloc_skb(adapter->netdev, |
| adapter->rx_buffer_len); |
| |
| page = adapter->rx_page; |
| if (!page) { |
| adapter->rx_page = page = alloc_page(GFP_ATOMIC); |
| if (unlikely(!page)) |
| return NULL; |
| adapter->rx_page_offset = 0; |
| } |
| |
| skb = build_skb(page_address(page) + adapter->rx_page_offset, |
| adapter->rx_frag_size); |
| if (likely(skb)) { |
| adapter->rx_page_offset += adapter->rx_frag_size; |
| if (adapter->rx_page_offset >= PAGE_SIZE) |
| adapter->rx_page = NULL; |
| else |
| get_page(page); |
| } |
| return skb; |
| } |
| |
| static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter) |
| { |
| struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct pci_dev *pdev = adapter->pdev; |
| struct atl1c_buffer *buffer_info, *next_info; |
| struct sk_buff *skb; |
| void *vir_addr = NULL; |
| u16 num_alloc = 0; |
| u16 rfd_next_to_use, next_next; |
| struct atl1c_rx_free_desc *rfd_desc; |
| dma_addr_t mapping; |
| |
| next_next = rfd_next_to_use = rfd_ring->next_to_use; |
| if (++next_next == rfd_ring->count) |
| next_next = 0; |
| buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; |
| next_info = &rfd_ring->buffer_info[next_next]; |
| |
| while (next_info->flags & ATL1C_BUFFER_FREE) { |
| rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use); |
| |
| skb = atl1c_alloc_skb(adapter); |
| if (unlikely(!skb)) { |
| if (netif_msg_rx_err(adapter)) |
| dev_warn(&pdev->dev, "alloc rx buffer failed\n"); |
| break; |
| } |
| |
| /* |
| * Make buffer alignment 2 beyond a 16 byte boundary |
| * this will result in a 16 byte aligned IP header after |
| * the 14 byte MAC header is removed |
| */ |
| vir_addr = skb->data; |
| ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY); |
| buffer_info->skb = skb; |
| buffer_info->length = adapter->rx_buffer_len; |
| mapping = pci_map_single(pdev, vir_addr, |
| buffer_info->length, |
| PCI_DMA_FROMDEVICE); |
| if (unlikely(pci_dma_mapping_error(pdev, mapping))) { |
| dev_kfree_skb(skb); |
| buffer_info->skb = NULL; |
| buffer_info->length = 0; |
| ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE); |
| netif_warn(adapter, rx_err, adapter->netdev, "RX pci_map_single failed"); |
| break; |
| } |
| buffer_info->dma = mapping; |
| ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE, |
| ATL1C_PCIMAP_FROMDEVICE); |
| rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); |
| rfd_next_to_use = next_next; |
| if (++next_next == rfd_ring->count) |
| next_next = 0; |
| buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; |
| next_info = &rfd_ring->buffer_info[next_next]; |
| num_alloc++; |
| } |
| |
| if (num_alloc) { |
| /* TODO: update mailbox here */ |
| wmb(); |
| rfd_ring->next_to_use = rfd_next_to_use; |
| AT_WRITE_REG(&adapter->hw, REG_MB_RFD0_PROD_IDX, |
| rfd_ring->next_to_use & MB_RFDX_PROD_IDX_MASK); |
| } |
| |
| return num_alloc; |
| } |
| |
| static void atl1c_clean_rrd(struct atl1c_rrd_ring *rrd_ring, |
| struct atl1c_recv_ret_status *rrs, u16 num) |
| { |
| u16 i; |
| /* the relationship between rrd and rfd is one map one */ |
| for (i = 0; i < num; i++, rrs = ATL1C_RRD_DESC(rrd_ring, |
| rrd_ring->next_to_clean)) { |
| rrs->word3 &= ~RRS_RXD_UPDATED; |
| if (++rrd_ring->next_to_clean == rrd_ring->count) |
| rrd_ring->next_to_clean = 0; |
| } |
| } |
| |
| static void atl1c_clean_rfd(struct atl1c_rfd_ring *rfd_ring, |
| struct atl1c_recv_ret_status *rrs, u16 num) |
| { |
| u16 i; |
| u16 rfd_index; |
| struct atl1c_buffer *buffer_info = rfd_ring->buffer_info; |
| |
| rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) & |
| RRS_RX_RFD_INDEX_MASK; |
| for (i = 0; i < num; i++) { |
| buffer_info[rfd_index].skb = NULL; |
| ATL1C_SET_BUFFER_STATE(&buffer_info[rfd_index], |
| ATL1C_BUFFER_FREE); |
| if (++rfd_index == rfd_ring->count) |
| rfd_index = 0; |
| } |
| rfd_ring->next_to_clean = rfd_index; |
| } |
| |
| static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, |
| int *work_done, int work_to_do) |
| { |
| u16 rfd_num, rfd_index; |
| u16 count = 0; |
| u16 length; |
| struct pci_dev *pdev = adapter->pdev; |
| struct net_device *netdev = adapter->netdev; |
| struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct sk_buff *skb; |
| struct atl1c_recv_ret_status *rrs; |
| struct atl1c_buffer *buffer_info; |
| |
| while (1) { |
| if (*work_done >= work_to_do) |
| break; |
| rrs = ATL1C_RRD_DESC(rrd_ring, rrd_ring->next_to_clean); |
| if (likely(RRS_RXD_IS_VALID(rrs->word3))) { |
| rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) & |
| RRS_RX_RFD_CNT_MASK; |
| if (unlikely(rfd_num != 1)) |
| /* TODO support mul rfd*/ |
| if (netif_msg_rx_err(adapter)) |
| dev_warn(&pdev->dev, |
| "Multi rfd not support yet!\n"); |
| goto rrs_checked; |
| } else { |
| break; |
| } |
| rrs_checked: |
| atl1c_clean_rrd(rrd_ring, rrs, rfd_num); |
| if (rrs->word3 & (RRS_RX_ERR_SUM | RRS_802_3_LEN_ERR)) { |
| atl1c_clean_rfd(rfd_ring, rrs, rfd_num); |
| if (netif_msg_rx_err(adapter)) |
| dev_warn(&pdev->dev, |
| "wrong packet! rrs word3 is %x\n", |
| rrs->word3); |
| continue; |
| } |
| |
| length = le16_to_cpu((rrs->word3 >> RRS_PKT_SIZE_SHIFT) & |
| RRS_PKT_SIZE_MASK); |
| /* Good Receive */ |
| if (likely(rfd_num == 1)) { |
| rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) & |
| RRS_RX_RFD_INDEX_MASK; |
| buffer_info = &rfd_ring->buffer_info[rfd_index]; |
| pci_unmap_single(pdev, buffer_info->dma, |
| buffer_info->length, PCI_DMA_FROMDEVICE); |
| skb = buffer_info->skb; |
| } else { |
| /* TODO */ |
| if (netif_msg_rx_err(adapter)) |
| dev_warn(&pdev->dev, |
| "Multi rfd not support yet!\n"); |
| break; |
| } |
| atl1c_clean_rfd(rfd_ring, rrs, rfd_num); |
| skb_put(skb, length - ETH_FCS_LEN); |
| skb->protocol = eth_type_trans(skb, netdev); |
| atl1c_rx_checksum(adapter, skb, rrs); |
| if (rrs->word3 & RRS_VLAN_INS) { |
| u16 vlan; |
| |
| AT_TAG_TO_VLAN(rrs->vlan_tag, vlan); |
| vlan = le16_to_cpu(vlan); |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan); |
| } |
| netif_receive_skb(skb); |
| |
| (*work_done)++; |
| count++; |
| } |
| if (count) |
| atl1c_alloc_rx_buffer(adapter); |
| } |
| |
| /** |
| * atl1c_clean - NAPI Rx polling callback |
| */ |
| static int atl1c_clean(struct napi_struct *napi, int budget) |
| { |
| struct atl1c_adapter *adapter = |
| container_of(napi, struct atl1c_adapter, napi); |
| int work_done = 0; |
| |
| /* Keep link state information with original netdev */ |
| if (!netif_carrier_ok(adapter->netdev)) |
| goto quit_polling; |
| /* just enable one RXQ */ |
| atl1c_clean_rx_irq(adapter, &work_done, budget); |
| |
| if (work_done < budget) { |
| quit_polling: |
| napi_complete(napi); |
| adapter->hw.intr_mask |= ISR_RX_PKT; |
| AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask); |
| } |
| return work_done; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| |
| /* |
| * Polling 'interrupt' - used by things like netconsole to send skbs |
| * without having to re-enable interrupts. It's not called while |
| * the interrupt routine is executing. |
| */ |
| static void atl1c_netpoll(struct net_device *netdev) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| disable_irq(adapter->pdev->irq); |
| atl1c_intr(adapter->pdev->irq, netdev); |
| enable_irq(adapter->pdev->irq); |
| } |
| #endif |
| |
| static inline u16 atl1c_tpd_avail(struct atl1c_adapter *adapter, enum atl1c_trans_queue type) |
| { |
| struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; |
| u16 next_to_use = 0; |
| u16 next_to_clean = 0; |
| |
| next_to_clean = atomic_read(&tpd_ring->next_to_clean); |
| next_to_use = tpd_ring->next_to_use; |
| |
| return (u16)(next_to_clean > next_to_use) ? |
| (next_to_clean - next_to_use - 1) : |
| (tpd_ring->count + next_to_clean - next_to_use - 1); |
| } |
| |
| /* |
| * get next usable tpd |
| * Note: should call atl1c_tdp_avail to make sure |
| * there is enough tpd to use |
| */ |
| static struct atl1c_tpd_desc *atl1c_get_tpd(struct atl1c_adapter *adapter, |
| enum atl1c_trans_queue type) |
| { |
| struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; |
| struct atl1c_tpd_desc *tpd_desc; |
| u16 next_to_use = 0; |
| |
| next_to_use = tpd_ring->next_to_use; |
| if (++tpd_ring->next_to_use == tpd_ring->count) |
| tpd_ring->next_to_use = 0; |
| tpd_desc = ATL1C_TPD_DESC(tpd_ring, next_to_use); |
| memset(tpd_desc, 0, sizeof(struct atl1c_tpd_desc)); |
| return tpd_desc; |
| } |
| |
| static struct atl1c_buffer * |
| atl1c_get_tx_buffer(struct atl1c_adapter *adapter, struct atl1c_tpd_desc *tpd) |
| { |
| struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; |
| |
| return &tpd_ring->buffer_info[tpd - |
| (struct atl1c_tpd_desc *)tpd_ring->desc]; |
| } |
| |
| /* Calculate the transmit packet descript needed*/ |
| static u16 atl1c_cal_tpd_req(const struct sk_buff *skb) |
| { |
| u16 tpd_req; |
| u16 proto_hdr_len = 0; |
| |
| tpd_req = skb_shinfo(skb)->nr_frags + 1; |
| |
| if (skb_is_gso(skb)) { |
| proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
| if (proto_hdr_len < skb_headlen(skb)) |
| tpd_req++; |
| if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) |
| tpd_req++; |
| } |
| return tpd_req; |
| } |
| |
| static int atl1c_tso_csum(struct atl1c_adapter *adapter, |
| struct sk_buff *skb, |
| struct atl1c_tpd_desc **tpd, |
| enum atl1c_trans_queue type) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| u8 hdr_len; |
| u32 real_len; |
| unsigned short offload_type; |
| int err; |
| |
| if (skb_is_gso(skb)) { |
| if (skb_header_cloned(skb)) { |
| err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); |
| if (unlikely(err)) |
| return -1; |
| } |
| offload_type = skb_shinfo(skb)->gso_type; |
| |
| if (offload_type & SKB_GSO_TCPV4) { |
| real_len = (((unsigned char *)ip_hdr(skb) - skb->data) |
| + ntohs(ip_hdr(skb)->tot_len)); |
| |
| if (real_len < skb->len) |
| pskb_trim(skb, real_len); |
| |
| hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); |
| if (unlikely(skb->len == hdr_len)) { |
| /* only xsum need */ |
| if (netif_msg_tx_queued(adapter)) |
| dev_warn(&pdev->dev, |
| "IPV4 tso with zero data??\n"); |
| goto check_sum; |
| } else { |
| ip_hdr(skb)->check = 0; |
| tcp_hdr(skb)->check = ~csum_tcpudp_magic( |
| ip_hdr(skb)->saddr, |
| ip_hdr(skb)->daddr, |
| 0, IPPROTO_TCP, 0); |
| (*tpd)->word1 |= 1 << TPD_IPV4_PACKET_SHIFT; |
| } |
| } |
| |
| if (offload_type & SKB_GSO_TCPV6) { |
| struct atl1c_tpd_ext_desc *etpd = |
| *(struct atl1c_tpd_ext_desc **)(tpd); |
| |
| memset(etpd, 0, sizeof(struct atl1c_tpd_ext_desc)); |
| *tpd = atl1c_get_tpd(adapter, type); |
| ipv6_hdr(skb)->payload_len = 0; |
| /* check payload == 0 byte ? */ |
| hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); |
| if (unlikely(skb->len == hdr_len)) { |
| /* only xsum need */ |
| if (netif_msg_tx_queued(adapter)) |
| dev_warn(&pdev->dev, |
| "IPV6 tso with zero data??\n"); |
| goto check_sum; |
| } else |
| tcp_hdr(skb)->check = ~csum_ipv6_magic( |
| &ipv6_hdr(skb)->saddr, |
| &ipv6_hdr(skb)->daddr, |
| 0, IPPROTO_TCP, 0); |
| etpd->word1 |= 1 << TPD_LSO_EN_SHIFT; |
| etpd->word1 |= 1 << TPD_LSO_VER_SHIFT; |
| etpd->pkt_len = cpu_to_le32(skb->len); |
| (*tpd)->word1 |= 1 << TPD_LSO_VER_SHIFT; |
| } |
| |
| (*tpd)->word1 |= 1 << TPD_LSO_EN_SHIFT; |
| (*tpd)->word1 |= (skb_transport_offset(skb) & TPD_TCPHDR_OFFSET_MASK) << |
| TPD_TCPHDR_OFFSET_SHIFT; |
| (*tpd)->word1 |= (skb_shinfo(skb)->gso_size & TPD_MSS_MASK) << |
| TPD_MSS_SHIFT; |
| return 0; |
| } |
| |
| check_sum: |
| if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { |
| u8 css, cso; |
| cso = skb_checksum_start_offset(skb); |
| |
| if (unlikely(cso & 0x1)) { |
| if (netif_msg_tx_err(adapter)) |
| dev_err(&adapter->pdev->dev, |
| "payload offset should not an event number\n"); |
| return -1; |
| } else { |
| css = cso + skb->csum_offset; |
| |
| (*tpd)->word1 |= ((cso >> 1) & TPD_PLOADOFFSET_MASK) << |
| TPD_PLOADOFFSET_SHIFT; |
| (*tpd)->word1 |= ((css >> 1) & TPD_CCSUM_OFFSET_MASK) << |
| TPD_CCSUM_OFFSET_SHIFT; |
| (*tpd)->word1 |= 1 << TPD_CCSUM_EN_SHIFT; |
| } |
| } |
| return 0; |
| } |
| |
| static void atl1c_tx_rollback(struct atl1c_adapter *adpt, |
| struct atl1c_tpd_desc *first_tpd, |
| enum atl1c_trans_queue type) |
| { |
| struct atl1c_tpd_ring *tpd_ring = &adpt->tpd_ring[type]; |
| struct atl1c_buffer *buffer_info; |
| struct atl1c_tpd_desc *tpd; |
| u16 first_index, index; |
| |
| first_index = first_tpd - (struct atl1c_tpd_desc *)tpd_ring->desc; |
| index = first_index; |
| while (index != tpd_ring->next_to_use) { |
| tpd = ATL1C_TPD_DESC(tpd_ring, index); |
| buffer_info = &tpd_ring->buffer_info[index]; |
| atl1c_clean_buffer(adpt->pdev, buffer_info, 0); |
| memset(tpd, 0, sizeof(struct atl1c_tpd_desc)); |
| if (++index == tpd_ring->count) |
| index = 0; |
| } |
| tpd_ring->next_to_use = first_index; |
| } |
| |
| static int atl1c_tx_map(struct atl1c_adapter *adapter, |
| struct sk_buff *skb, struct atl1c_tpd_desc *tpd, |
| enum atl1c_trans_queue type) |
| { |
| struct atl1c_tpd_desc *use_tpd = NULL; |
| struct atl1c_buffer *buffer_info = NULL; |
| u16 buf_len = skb_headlen(skb); |
| u16 map_len = 0; |
| u16 mapped_len = 0; |
| u16 hdr_len = 0; |
| u16 nr_frags; |
| u16 f; |
| int tso; |
| |
| nr_frags = skb_shinfo(skb)->nr_frags; |
| tso = (tpd->word1 >> TPD_LSO_EN_SHIFT) & TPD_LSO_EN_MASK; |
| if (tso) { |
| /* TSO */ |
| map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
| use_tpd = tpd; |
| |
| buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); |
| buffer_info->length = map_len; |
| buffer_info->dma = pci_map_single(adapter->pdev, |
| skb->data, hdr_len, PCI_DMA_TODEVICE); |
| if (unlikely(pci_dma_mapping_error(adapter->pdev, |
| buffer_info->dma))) |
| goto err_dma; |
| ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY); |
| ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE, |
| ATL1C_PCIMAP_TODEVICE); |
| mapped_len += map_len; |
| use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); |
| use_tpd->buffer_len = cpu_to_le16(buffer_info->length); |
| } |
| |
| if (mapped_len < buf_len) { |
| /* mapped_len == 0, means we should use the first tpd, |
| which is given by caller */ |
| if (mapped_len == 0) |
| use_tpd = tpd; |
| else { |
| use_tpd = atl1c_get_tpd(adapter, type); |
| memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); |
| } |
| buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); |
| buffer_info->length = buf_len - mapped_len; |
| buffer_info->dma = |
| pci_map_single(adapter->pdev, skb->data + mapped_len, |
| buffer_info->length, PCI_DMA_TODEVICE); |
| if (unlikely(pci_dma_mapping_error(adapter->pdev, |
| buffer_info->dma))) |
| goto err_dma; |
| |
| ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY); |
| ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE, |
| ATL1C_PCIMAP_TODEVICE); |
| use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); |
| use_tpd->buffer_len = cpu_to_le16(buffer_info->length); |
| } |
| |
| for (f = 0; f < nr_frags; f++) { |
| struct skb_frag_struct *frag; |
| |
| frag = &skb_shinfo(skb)->frags[f]; |
| |
| use_tpd = atl1c_get_tpd(adapter, type); |
| memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); |
| |
| buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); |
| buffer_info->length = skb_frag_size(frag); |
| buffer_info->dma = skb_frag_dma_map(&adapter->pdev->dev, |
| frag, 0, |
| buffer_info->length, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) |
| goto err_dma; |
| |
| ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY); |
| ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_PAGE, |
| ATL1C_PCIMAP_TODEVICE); |
| use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); |
| use_tpd->buffer_len = cpu_to_le16(buffer_info->length); |
| } |
| |
| /* The last tpd */ |
| use_tpd->word1 |= 1 << TPD_EOP_SHIFT; |
| /* The last buffer info contain the skb address, |
| so it will be free after unmap */ |
| buffer_info->skb = skb; |
| |
| return 0; |
| |
| err_dma: |
| buffer_info->dma = 0; |
| buffer_info->length = 0; |
| return -1; |
| } |
| |
| static void atl1c_tx_queue(struct atl1c_adapter *adapter, struct sk_buff *skb, |
| struct atl1c_tpd_desc *tpd, enum atl1c_trans_queue type) |
| { |
| struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; |
| u16 reg; |
| |
| reg = type == atl1c_trans_high ? REG_TPD_PRI1_PIDX : REG_TPD_PRI0_PIDX; |
| AT_WRITE_REGW(&adapter->hw, reg, tpd_ring->next_to_use); |
| } |
| |
| static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| unsigned long flags; |
| u16 tpd_req = 1; |
| struct atl1c_tpd_desc *tpd; |
| enum atl1c_trans_queue type = atl1c_trans_normal; |
| |
| if (test_bit(__AT_DOWN, &adapter->flags)) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| tpd_req = atl1c_cal_tpd_req(skb); |
| if (!spin_trylock_irqsave(&adapter->tx_lock, flags)) { |
| if (netif_msg_pktdata(adapter)) |
| dev_info(&adapter->pdev->dev, "tx locked\n"); |
| return NETDEV_TX_LOCKED; |
| } |
| |
| if (atl1c_tpd_avail(adapter, type) < tpd_req) { |
| /* no enough descriptor, just stop queue */ |
| netif_stop_queue(netdev); |
| spin_unlock_irqrestore(&adapter->tx_lock, flags); |
| return NETDEV_TX_BUSY; |
| } |
| |
| tpd = atl1c_get_tpd(adapter, type); |
| |
| /* do TSO and check sum */ |
| if (atl1c_tso_csum(adapter, skb, &tpd, type) != 0) { |
| spin_unlock_irqrestore(&adapter->tx_lock, flags); |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| if (unlikely(vlan_tx_tag_present(skb))) { |
| u16 vlan = vlan_tx_tag_get(skb); |
| __le16 tag; |
| |
| vlan = cpu_to_le16(vlan); |
| AT_VLAN_TO_TAG(vlan, tag); |
| tpd->word1 |= 1 << TPD_INS_VTAG_SHIFT; |
| tpd->vlan_tag = tag; |
| } |
| |
| if (skb_network_offset(skb) != ETH_HLEN) |
| tpd->word1 |= 1 << TPD_ETH_TYPE_SHIFT; /* Ethernet frame */ |
| |
| if (atl1c_tx_map(adapter, skb, tpd, type) < 0) { |
| netif_info(adapter, tx_done, adapter->netdev, |
| "tx-skb droppted due to dma error\n"); |
| /* roll back tpd/buffer */ |
| atl1c_tx_rollback(adapter, tpd, type); |
| spin_unlock_irqrestore(&adapter->tx_lock, flags); |
| dev_kfree_skb(skb); |
| } else { |
| atl1c_tx_queue(adapter, skb, tpd, type); |
| spin_unlock_irqrestore(&adapter->tx_lock, flags); |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static void atl1c_free_irq(struct atl1c_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| free_irq(adapter->pdev->irq, netdev); |
| |
| if (adapter->have_msi) |
| pci_disable_msi(adapter->pdev); |
| } |
| |
| static int atl1c_request_irq(struct atl1c_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| struct net_device *netdev = adapter->netdev; |
| int flags = 0; |
| int err = 0; |
| |
| adapter->have_msi = true; |
| err = pci_enable_msi(adapter->pdev); |
| if (err) { |
| if (netif_msg_ifup(adapter)) |
| dev_err(&pdev->dev, |
| "Unable to allocate MSI interrupt Error: %d\n", |
| err); |
| adapter->have_msi = false; |
| } |
| |
| if (!adapter->have_msi) |
| flags |= IRQF_SHARED; |
| err = request_irq(adapter->pdev->irq, atl1c_intr, flags, |
| netdev->name, netdev); |
| if (err) { |
| if (netif_msg_ifup(adapter)) |
| dev_err(&pdev->dev, |
| "Unable to allocate interrupt Error: %d\n", |
| err); |
| if (adapter->have_msi) |
| pci_disable_msi(adapter->pdev); |
| return err; |
| } |
| if (netif_msg_ifup(adapter)) |
| dev_dbg(&pdev->dev, "atl1c_request_irq OK\n"); |
| return err; |
| } |
| |
| |
| static void atl1c_reset_dma_ring(struct atl1c_adapter *adapter) |
| { |
| /* release tx-pending skbs and reset tx/rx ring index */ |
| atl1c_clean_tx_ring(adapter, atl1c_trans_normal); |
| atl1c_clean_tx_ring(adapter, atl1c_trans_high); |
| atl1c_clean_rx_ring(adapter); |
| } |
| |
| static int atl1c_up(struct atl1c_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int err; |
| |
| netif_carrier_off(netdev); |
| |
| err = atl1c_configure(adapter); |
| if (unlikely(err)) |
| goto err_up; |
| |
| err = atl1c_request_irq(adapter); |
| if (unlikely(err)) |
| goto err_up; |
| |
| atl1c_check_link_status(adapter); |
| clear_bit(__AT_DOWN, &adapter->flags); |
| napi_enable(&adapter->napi); |
| atl1c_irq_enable(adapter); |
| netif_start_queue(netdev); |
| return err; |
| |
| err_up: |
| atl1c_clean_rx_ring(adapter); |
| return err; |
| } |
| |
| static void atl1c_down(struct atl1c_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| atl1c_del_timer(adapter); |
| adapter->work_event = 0; /* clear all event */ |
| /* signal that we're down so the interrupt handler does not |
| * reschedule our watchdog timer */ |
| set_bit(__AT_DOWN, &adapter->flags); |
| netif_carrier_off(netdev); |
| napi_disable(&adapter->napi); |
| atl1c_irq_disable(adapter); |
| atl1c_free_irq(adapter); |
| /* disable ASPM if device inactive */ |
| atl1c_disable_l0s_l1(&adapter->hw); |
| /* reset MAC to disable all RX/TX */ |
| atl1c_reset_mac(&adapter->hw); |
| msleep(1); |
| |
| adapter->link_speed = SPEED_0; |
| adapter->link_duplex = -1; |
| atl1c_reset_dma_ring(adapter); |
| } |
| |
| /** |
| * atl1c_open - Called when a network interface is made active |
| * @netdev: network interface device structure |
| * |
| * Returns 0 on success, negative value on failure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the watchdog timer is started, |
| * and the stack is notified that the interface is ready. |
| */ |
| static int atl1c_open(struct net_device *netdev) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| int err; |
| |
| /* disallow open during test */ |
| if (test_bit(__AT_TESTING, &adapter->flags)) |
| return -EBUSY; |
| |
| /* allocate rx/tx dma buffer & descriptors */ |
| err = atl1c_setup_ring_resources(adapter); |
| if (unlikely(err)) |
| return err; |
| |
| err = atl1c_up(adapter); |
| if (unlikely(err)) |
| goto err_up; |
| |
| return 0; |
| |
| err_up: |
| atl1c_free_irq(adapter); |
| atl1c_free_ring_resources(adapter); |
| atl1c_reset_mac(&adapter->hw); |
| return err; |
| } |
| |
| /** |
| * atl1c_close - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * Returns 0, this is not allowed to fail |
| * |
| * The close entry point is called when an interface is de-activated |
| * by the OS. The hardware is still under the drivers control, but |
| * needs to be disabled. A global MAC reset is issued to stop the |
| * hardware, and all transmit and receive resources are freed. |
| */ |
| static int atl1c_close(struct net_device *netdev) |
| { |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); |
| set_bit(__AT_DOWN, &adapter->flags); |
| cancel_work_sync(&adapter->common_task); |
| atl1c_down(adapter); |
| atl1c_free_ring_resources(adapter); |
| return 0; |
| } |
| |
| static int atl1c_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| struct atl1c_hw *hw = &adapter->hw; |
| u32 wufc = adapter->wol; |
| |
| atl1c_disable_l0s_l1(hw); |
| if (netif_running(netdev)) { |
| WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); |
| atl1c_down(adapter); |
| } |
| netif_device_detach(netdev); |
| |
| if (wufc) |
| if (atl1c_phy_to_ps_link(hw) != 0) |
| dev_dbg(&pdev->dev, "phy power saving failed"); |
| |
| atl1c_power_saving(hw, wufc); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int atl1c_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); |
| atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE); |
| |
| atl1c_phy_reset(&adapter->hw); |
| atl1c_reset_mac(&adapter->hw); |
| atl1c_phy_init(&adapter->hw); |
| |
| #if 0 |
| AT_READ_REG(&adapter->hw, REG_PM_CTRLSTAT, &pm_data); |
| pm_data &= ~PM_CTRLSTAT_PME_EN; |
| AT_WRITE_REG(&adapter->hw, REG_PM_CTRLSTAT, pm_data); |
| #endif |
| |
| netif_device_attach(netdev); |
| if (netif_running(netdev)) |
| atl1c_up(adapter); |
| |
| return 0; |
| } |
| #endif |
| |
| static void atl1c_shutdown(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| atl1c_suspend(&pdev->dev); |
| pci_wake_from_d3(pdev, adapter->wol); |
| pci_set_power_state(pdev, PCI_D3hot); |
| } |
| |
| static const struct net_device_ops atl1c_netdev_ops = { |
| .ndo_open = atl1c_open, |
| .ndo_stop = atl1c_close, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_start_xmit = atl1c_xmit_frame, |
| .ndo_set_mac_address = atl1c_set_mac_addr, |
| .ndo_set_rx_mode = atl1c_set_multi, |
| .ndo_change_mtu = atl1c_change_mtu, |
| .ndo_fix_features = atl1c_fix_features, |
| .ndo_set_features = atl1c_set_features, |
| .ndo_do_ioctl = atl1c_ioctl, |
| .ndo_tx_timeout = atl1c_tx_timeout, |
| .ndo_get_stats = atl1c_get_stats, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = atl1c_netpoll, |
| #endif |
| }; |
| |
| static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev) |
| { |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| pci_set_drvdata(pdev, netdev); |
| |
| netdev->netdev_ops = &atl1c_netdev_ops; |
| netdev->watchdog_timeo = AT_TX_WATCHDOG; |
| atl1c_set_ethtool_ops(netdev); |
| |
| /* TODO: add when ready */ |
| netdev->hw_features = NETIF_F_SG | |
| NETIF_F_HW_CSUM | |
| NETIF_F_HW_VLAN_CTAG_RX | |
| NETIF_F_TSO | |
| NETIF_F_TSO6; |
| netdev->features = netdev->hw_features | |
| NETIF_F_HW_VLAN_CTAG_TX; |
| return 0; |
| } |
| |
| /** |
| * atl1c_probe - Device Initialization Routine |
| * @pdev: PCI device information struct |
| * @ent: entry in atl1c_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| * |
| * atl1c_probe initializes an adapter identified by a pci_dev structure. |
| * The OS initialization, configuring of the adapter private structure, |
| * and a hardware reset occur. |
| */ |
| static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct net_device *netdev; |
| struct atl1c_adapter *adapter; |
| static int cards_found; |
| |
| int err = 0; |
| |
| /* enable device (incl. PCI PM wakeup and hotplug setup) */ |
| err = pci_enable_device_mem(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "cannot enable PCI device\n"); |
| return err; |
| } |
| |
| /* |
| * The atl1c chip can DMA to 64-bit addresses, but it uses a single |
| * shared register for the high 32 bits, so only a single, aligned, |
| * 4 GB physical address range can be used at a time. |
| * |
| * Supporting 64-bit DMA on this hardware is more trouble than it's |
| * worth. It is far easier to limit to 32-bit DMA than update |
| * various kernel subsystems to support the mechanics required by a |
| * fixed-high-32-bit system. |
| */ |
| if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) || |
| (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) { |
| dev_err(&pdev->dev, "No usable DMA configuration,aborting\n"); |
| goto err_dma; |
| } |
| |
| err = pci_request_regions(pdev, atl1c_driver_name); |
| if (err) { |
| dev_err(&pdev->dev, "cannot obtain PCI resources\n"); |
| goto err_pci_reg; |
| } |
| |
| pci_set_master(pdev); |
| |
| netdev = alloc_etherdev(sizeof(struct atl1c_adapter)); |
| if (netdev == NULL) { |
| err = -ENOMEM; |
| goto err_alloc_etherdev; |
| } |
| |
| err = atl1c_init_netdev(netdev, pdev); |
| if (err) { |
| dev_err(&pdev->dev, "init netdevice failed\n"); |
| goto err_init_netdev; |
| } |
| adapter = netdev_priv(netdev); |
| adapter->bd_number = cards_found; |
| adapter->netdev = netdev; |
| adapter->pdev = pdev; |
| adapter->hw.adapter = adapter; |
| adapter->msg_enable = netif_msg_init(-1, atl1c_default_msg); |
| adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); |
| if (!adapter->hw.hw_addr) { |
| err = -EIO; |
| dev_err(&pdev->dev, "cannot map device registers\n"); |
| goto err_ioremap; |
| } |
| |
| /* init mii data */ |
| adapter->mii.dev = netdev; |
| adapter->mii.mdio_read = atl1c_mdio_read; |
| adapter->mii.mdio_write = atl1c_mdio_write; |
| adapter->mii.phy_id_mask = 0x1f; |
| adapter->mii.reg_num_mask = MDIO_CTRL_REG_MASK; |
| netif_napi_add(netdev, &adapter->napi, atl1c_clean, 64); |
| setup_timer(&adapter->phy_config_timer, atl1c_phy_config, |
| (unsigned long)adapter); |
| /* setup the private structure */ |
| err = atl1c_sw_init(adapter); |
| if (err) { |
| dev_err(&pdev->dev, "net device private data init failed\n"); |
| goto err_sw_init; |
| } |
| atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE); |
| |
| /* Init GPHY as early as possible due to power saving issue */ |
| atl1c_phy_reset(&adapter->hw); |
| |
| err = atl1c_reset_mac(&adapter->hw); |
| if (err) { |
| err = -EIO; |
| goto err_reset; |
| } |
| |
| /* reset the controller to |
| * put the device in a known good starting state */ |
| err = atl1c_phy_init(&adapter->hw); |
| if (err) { |
| err = -EIO; |
| goto err_reset; |
| } |
| if (atl1c_read_mac_addr(&adapter->hw)) { |
| /* got a random MAC address, set NET_ADDR_RANDOM to netdev */ |
| netdev->addr_assign_type = NET_ADDR_RANDOM; |
| } |
| memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); |
| if (netif_msg_probe(adapter)) |
| dev_dbg(&pdev->dev, "mac address : %pM\n", |
| adapter->hw.mac_addr); |
| |
| atl1c_hw_set_mac_addr(&adapter->hw, adapter->hw.mac_addr); |
| INIT_WORK(&adapter->common_task, atl1c_common_task); |
| adapter->work_event = 0; |
| err = register_netdev(netdev); |
| if (err) { |
| dev_err(&pdev->dev, "register netdevice failed\n"); |
| goto err_register; |
| } |
| |
| if (netif_msg_probe(adapter)) |
| dev_info(&pdev->dev, "version %s\n", ATL1C_DRV_VERSION); |
| cards_found++; |
| return 0; |
| |
| err_reset: |
| err_register: |
| err_sw_init: |
| iounmap(adapter->hw.hw_addr); |
| err_init_netdev: |
| err_ioremap: |
| free_netdev(netdev); |
| err_alloc_etherdev: |
| pci_release_regions(pdev); |
| err_pci_reg: |
| err_dma: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * atl1c_remove - Device Removal Routine |
| * @pdev: PCI device information struct |
| * |
| * atl1c_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. The could be caused by a |
| * Hot-Plug event, or because the driver is going to be removed from |
| * memory. |
| */ |
| static void atl1c_remove(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| unregister_netdev(netdev); |
| /* restore permanent address */ |
| atl1c_hw_set_mac_addr(&adapter->hw, adapter->hw.perm_mac_addr); |
| atl1c_phy_disable(&adapter->hw); |
| |
| iounmap(adapter->hw.hw_addr); |
| |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| free_netdev(netdev); |
| } |
| |
| /** |
| * atl1c_io_error_detected - called when PCI error is detected |
| * @pdev: Pointer to PCI device |
| * @state: The current pci connection state |
| * |
| * This function is called after a PCI bus error affecting |
| * this device has been detected. |
| */ |
| static pci_ers_result_t atl1c_io_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| netif_device_detach(netdev); |
| |
| if (state == pci_channel_io_perm_failure) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| if (netif_running(netdev)) |
| atl1c_down(adapter); |
| |
| pci_disable_device(pdev); |
| |
| /* Request a slot slot reset. */ |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| /** |
| * atl1c_io_slot_reset - called after the pci bus has been reset. |
| * @pdev: Pointer to PCI device |
| * |
| * Restart the card from scratch, as if from a cold-boot. Implementation |
| * resembles the first-half of the e1000_resume routine. |
| */ |
| static pci_ers_result_t atl1c_io_slot_reset(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| if (pci_enable_device(pdev)) { |
| if (netif_msg_hw(adapter)) |
| dev_err(&pdev->dev, |
| "Cannot re-enable PCI device after reset\n"); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| pci_set_master(pdev); |
| |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_enable_wake(pdev, PCI_D3cold, 0); |
| |
| atl1c_reset_mac(&adapter->hw); |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| /** |
| * atl1c_io_resume - called when traffic can start flowing again. |
| * @pdev: Pointer to PCI device |
| * |
| * This callback is called when the error recovery driver tells us that |
| * its OK to resume normal operation. Implementation resembles the |
| * second-half of the atl1c_resume routine. |
| */ |
| static void atl1c_io_resume(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1c_adapter *adapter = netdev_priv(netdev); |
| |
| if (netif_running(netdev)) { |
| if (atl1c_up(adapter)) { |
| if (netif_msg_hw(adapter)) |
| dev_err(&pdev->dev, |
| "Cannot bring device back up after reset\n"); |
| return; |
| } |
| } |
| |
| netif_device_attach(netdev); |
| } |
| |
| static const struct pci_error_handlers atl1c_err_handler = { |
| .error_detected = atl1c_io_error_detected, |
| .slot_reset = atl1c_io_slot_reset, |
| .resume = atl1c_io_resume, |
| }; |
| |
| static SIMPLE_DEV_PM_OPS(atl1c_pm_ops, atl1c_suspend, atl1c_resume); |
| |
| static struct pci_driver atl1c_driver = { |
| .name = atl1c_driver_name, |
| .id_table = atl1c_pci_tbl, |
| .probe = atl1c_probe, |
| .remove = atl1c_remove, |
| .shutdown = atl1c_shutdown, |
| .err_handler = &atl1c_err_handler, |
| .driver.pm = &atl1c_pm_ops, |
| }; |
| |
| module_pci_driver(atl1c_driver); |