md/raid5: Remove use of sh->lock in sync_request
This is the start of a series of patches to remove sh->lock.
sync_request takes sh->lock before setting STRIPE_SYNCING to ensure
there is no race with testing it in handle_stripe[56].
Instead, use a new flag STRIPE_SYNC_REQUESTED and test it early
in handle_stripe[56] (after getting the same lock) and perform the
same set/clear operations if it was set.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 3ca77a2..a330011 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -289,21 +289,24 @@
/*
* Stripe state
*/
-#define STRIPE_HANDLE 2
-#define STRIPE_SYNCING 3
-#define STRIPE_INSYNC 4
-#define STRIPE_PREREAD_ACTIVE 5
-#define STRIPE_DELAYED 6
-#define STRIPE_DEGRADED 7
-#define STRIPE_BIT_DELAY 8
-#define STRIPE_EXPANDING 9
-#define STRIPE_EXPAND_SOURCE 10
-#define STRIPE_EXPAND_READY 11
-#define STRIPE_IO_STARTED 12 /* do not count towards 'bypass_count' */
-#define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */
-#define STRIPE_BIOFILL_RUN 14
-#define STRIPE_COMPUTE_RUN 15
-#define STRIPE_OPS_REQ_PENDING 16
+enum {
+ STRIPE_HANDLE,
+ STRIPE_SYNC_REQUESTED,
+ STRIPE_SYNCING,
+ STRIPE_INSYNC,
+ STRIPE_PREREAD_ACTIVE,
+ STRIPE_DELAYED,
+ STRIPE_DEGRADED,
+ STRIPE_BIT_DELAY,
+ STRIPE_EXPANDING,
+ STRIPE_EXPAND_SOURCE,
+ STRIPE_EXPAND_READY,
+ STRIPE_IO_STARTED, /* do not count towards 'bypass_count' */
+ STRIPE_FULL_WRITE, /* all blocks are set to be overwritten */
+ STRIPE_BIOFILL_RUN,
+ STRIPE_COMPUTE_RUN,
+ STRIPE_OPS_REQ_PENDING,
+};
/*
* Operation request flags