ide: remove SATA_*_REG macros
* siimage.c: use hwif->sata_scr[SATA_{ERROR,STATUS}_OFFSET] instead of
SATA_{ERROR,STATUS}_REG macros.
* Remove no longer needed SATA_*_REG macros.
While at it:
* Remove needless SATA Status register read from sil_sata_reset_poll().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 5c1bd79..ef5b39f 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -331,15 +331,18 @@
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long addr = siimage_selreg(hwif, 0x1);
+ void __iomem *sata_error_addr
+ = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
- if (SATA_ERROR_REG) {
+ if (sata_error_addr) {
unsigned long base = (unsigned long)hwif->hwif_data;
-
u32 ext_stat = readl((void __iomem *)(base + 0x10));
u8 watchdog = 0;
+
if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
- u32 sata_error = readl((void __iomem *)SATA_ERROR_REG);
- writel(sata_error, (void __iomem *)SATA_ERROR_REG);
+ u32 sata_error = readl(sata_error_addr);
+
+ writel(sata_error, sata_error_addr);
watchdog = (sata_error & 0x00680000) ? 1 : 0;
printk(KERN_WARNING "%s: sata_error = 0x%08x, "
"watchdog = %d, %s\n",
@@ -418,13 +421,17 @@
static int sil_sata_reset_poll(ide_drive_t *drive)
{
- if (SATA_STATUS_REG) {
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
+ void __iomem *sata_status_addr
+ = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
- /* SATA_STATUS_REG is valid only when in MMIO mode */
- if ((readl((void __iomem *)SATA_STATUS_REG) & 0x03) != 0x03) {
+ if (sata_status_addr) {
+ /* SATA Status is available only when in MMIO mode */
+ u32 sata_stat = readl(sata_status_addr);
+
+ if ((sata_stat & 0x03) != 0x03) {
printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
- hwif->name, readl((void __iomem *)SATA_STATUS_REG));
+ hwif->name, sata_stat);
HWGROUP(drive)->polling = 0;
return ide_started;
}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 4871437..e2048d2 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -112,18 +112,12 @@
#define SATA_NR_PORTS (3) /* 16 possible ?? */
#define SATA_STATUS_OFFSET (0)
-#define SATA_STATUS_REG (HWIF(drive)->sata_scr[SATA_STATUS_OFFSET])
#define SATA_ERROR_OFFSET (1)
-#define SATA_ERROR_REG (HWIF(drive)->sata_scr[SATA_ERROR_OFFSET])
#define SATA_CONTROL_OFFSET (2)
-#define SATA_CONTROL_REG (HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET])
#define SATA_MISC_OFFSET (0)
-#define SATA_MISC_REG (HWIF(drive)->sata_misc[SATA_MISC_OFFSET])
#define SATA_PHY_OFFSET (1)
-#define SATA_PHY_REG (HWIF(drive)->sata_misc[SATA_PHY_OFFSET])
#define SATA_IEN_OFFSET (2)
-#define SATA_IEN_REG (HWIF(drive)->sata_misc[SATA_IEN_OFFSET])
/*
* Our Physical Region Descriptor (PRD) table should be large enough