| /* |
| * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02 |
| * |
| * Copyright 2008-2009 Analog Devices Inc. |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #define DRIVER_NAME "bfin-lq035q1" |
| #define pr_fmt(fmt) DRIVER_NAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| #include <linux/backlight.h> |
| #include <linux/lcd.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/spi/spi.h> |
| |
| #include <asm/blackfin.h> |
| #include <asm/irq.h> |
| #include <asm/dma.h> |
| #include <asm/portmux.h> |
| #include <asm/gptimers.h> |
| |
| #include <asm/bfin-lq035q1.h> |
| |
| #if defined(BF533_FAMILY) || defined(BF538_FAMILY) |
| #define TIMER_HSYNC_id TIMER1_id |
| #define TIMER_HSYNCbit TIMER1bit |
| #define TIMER_HSYNC_STATUS_TRUN TIMER_STATUS_TRUN1 |
| #define TIMER_HSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL1 |
| #define TIMER_HSYNC_STATUS_TOVF TIMER_STATUS_TOVF1 |
| |
| #define TIMER_VSYNC_id TIMER2_id |
| #define TIMER_VSYNCbit TIMER2bit |
| #define TIMER_VSYNC_STATUS_TRUN TIMER_STATUS_TRUN2 |
| #define TIMER_VSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL2 |
| #define TIMER_VSYNC_STATUS_TOVF TIMER_STATUS_TOVF2 |
| #else |
| #define TIMER_HSYNC_id TIMER0_id |
| #define TIMER_HSYNCbit TIMER0bit |
| #define TIMER_HSYNC_STATUS_TRUN TIMER_STATUS_TRUN0 |
| #define TIMER_HSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL0 |
| #define TIMER_HSYNC_STATUS_TOVF TIMER_STATUS_TOVF0 |
| |
| #define TIMER_VSYNC_id TIMER1_id |
| #define TIMER_VSYNCbit TIMER1bit |
| #define TIMER_VSYNC_STATUS_TRUN TIMER_STATUS_TRUN1 |
| #define TIMER_VSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL1 |
| #define TIMER_VSYNC_STATUS_TOVF TIMER_STATUS_TOVF1 |
| #endif |
| |
| #define LCD_X_RES 320 /* Horizontal Resolution */ |
| #define LCD_Y_RES 240 /* Vertical Resolution */ |
| #define DMA_BUS_SIZE 16 |
| |
| #define USE_RGB565_16_BIT_PPI |
| |
| #ifdef USE_RGB565_16_BIT_PPI |
| #define LCD_BPP 16 /* Bit Per Pixel */ |
| #define CLOCKS_PER_PIX 1 |
| #define CPLD_PIPELINE_DELAY_COR 0 /* NO CPLB */ |
| #endif |
| |
| /* Interface 16/18-bit TFT over an 8-bit wide PPI using a small Programmable Logic Device (CPLD) |
| * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165 |
| */ |
| |
| #ifdef USE_RGB565_8_BIT_PPI |
| #define LCD_BPP 16 /* Bit Per Pixel */ |
| #define CLOCKS_PER_PIX 2 |
| #define CPLD_PIPELINE_DELAY_COR 3 /* RGB565 */ |
| #endif |
| |
| #ifdef USE_RGB888_8_BIT_PPI |
| #define LCD_BPP 24 /* Bit Per Pixel */ |
| #define CLOCKS_PER_PIX 3 |
| #define CPLD_PIPELINE_DELAY_COR 5 /* RGB888 */ |
| #endif |
| |
| /* |
| * HS and VS timing parameters (all in number of PPI clk ticks) |
| */ |
| |
| #define U_LINE 4 /* Blanking Lines */ |
| |
| #define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */ |
| #define H_PERIOD (336 * CLOCKS_PER_PIX) /* HS period */ |
| #define H_PULSE (2 * CLOCKS_PER_PIX) /* HS pulse width */ |
| #define H_START (7 * CLOCKS_PER_PIX + CPLD_PIPELINE_DELAY_COR) /* first valid pixel */ |
| |
| #define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */ |
| #define V_PULSE (2 * CLOCKS_PER_PIX) /* VS pulse width (1-5 H_PERIODs) */ |
| #define V_PERIOD (H_PERIOD * V_LINES) /* VS period */ |
| |
| #define ACTIVE_VIDEO_MEM_OFFSET ((U_LINE / 2) * LCD_X_RES * (LCD_BPP / 8)) |
| |
| #define BFIN_LCD_NBR_PALETTE_ENTRIES 256 |
| |
| #define PPI_TX_MODE 0x2 |
| #define PPI_XFER_TYPE_11 0xC |
| #define PPI_PORT_CFG_01 0x10 |
| #define PPI_POLS_1 0x8000 |
| |
| #if (CLOCKS_PER_PIX > 1) |
| #define PPI_PMODE (DLEN_8 | PACK_EN) |
| #else |
| #define PPI_PMODE (DLEN_16) |
| #endif |
| |
| #define LQ035_INDEX 0x74 |
| #define LQ035_DATA 0x76 |
| |
| #define LQ035_DRIVER_OUTPUT_CTL 0x1 |
| #define LQ035_SHUT_CTL 0x11 |
| |
| #define LQ035_DRIVER_OUTPUT_MASK (LQ035_LR | LQ035_TB | LQ035_BGR | LQ035_REV) |
| #define LQ035_DRIVER_OUTPUT_DEFAULT (0x2AEF & ~LQ035_DRIVER_OUTPUT_MASK) |
| |
| #define LQ035_SHUT (1 << 0) /* Shutdown */ |
| #define LQ035_ON (0 << 0) /* Shutdown */ |
| |
| struct bfin_lq035q1fb_info { |
| struct fb_info *fb; |
| struct device *dev; |
| struct spi_driver spidrv; |
| struct bfin_lq035q1fb_disp_info *disp_info; |
| unsigned char *fb_buffer; /* RGB Buffer */ |
| dma_addr_t dma_handle; |
| int lq035_open_cnt; |
| int irq; |
| spinlock_t lock; /* lock */ |
| u32 pseudo_pal[16]; |
| }; |
| |
| static int nocursor; |
| module_param(nocursor, int, 0644); |
| MODULE_PARM_DESC(nocursor, "cursor enable/disable"); |
| |
| struct spi_control { |
| unsigned short mode; |
| }; |
| |
| static int lq035q1_control(struct spi_device *spi, unsigned char reg, unsigned short value) |
| { |
| int ret; |
| u8 regs[3] = { LQ035_INDEX, 0, 0 }; |
| u8 dat[3] = { LQ035_DATA, 0, 0 }; |
| |
| if (!spi) |
| return -ENODEV; |
| |
| regs[2] = reg; |
| dat[1] = value >> 8; |
| dat[2] = value & 0xFF; |
| |
| ret = spi_write(spi, regs, ARRAY_SIZE(regs)); |
| ret |= spi_write(spi, dat, ARRAY_SIZE(dat)); |
| return ret; |
| } |
| |
| static int __devinit lq035q1_spidev_probe(struct spi_device *spi) |
| { |
| int ret; |
| struct spi_control *ctl; |
| struct bfin_lq035q1fb_info *info = container_of(spi->dev.driver, |
| struct bfin_lq035q1fb_info, |
| spidrv.driver); |
| |
| ctl = kzalloc(sizeof(*ctl), GFP_KERNEL); |
| |
| if (!ctl) |
| return -ENOMEM; |
| |
| ctl->mode = (info->disp_info->mode & |
| LQ035_DRIVER_OUTPUT_MASK) | LQ035_DRIVER_OUTPUT_DEFAULT; |
| |
| ret = lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON); |
| ret |= lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode); |
| if (ret) |
| return ret; |
| |
| spi_set_drvdata(spi, ctl); |
| |
| return 0; |
| } |
| |
| static int lq035q1_spidev_remove(struct spi_device *spi) |
| { |
| return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT); |
| } |
| |
| #ifdef CONFIG_PM |
| static int lq035q1_spidev_suspend(struct spi_device *spi, pm_message_t state) |
| { |
| return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT); |
| } |
| |
| static int lq035q1_spidev_resume(struct spi_device *spi) |
| { |
| int ret; |
| struct spi_control *ctl = spi_get_drvdata(spi); |
| |
| ret = lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode); |
| if (ret) |
| return ret; |
| |
| return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON); |
| } |
| #else |
| # define lq035q1_spidev_suspend NULL |
| # define lq035q1_spidev_resume NULL |
| #endif |
| |
| /* Power down all displays on reboot, poweroff or halt */ |
| static void lq035q1_spidev_shutdown(struct spi_device *spi) |
| { |
| lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT); |
| } |
| |
| static int lq035q1_backlight(struct bfin_lq035q1fb_info *info, unsigned arg) |
| { |
| if (info->disp_info->use_bl) |
| gpio_set_value(info->disp_info->gpio_bl, arg); |
| |
| return 0; |
| } |
| |
| static void bfin_lq035q1_config_ppi(struct bfin_lq035q1fb_info *fbi) |
| { |
| bfin_write_PPI_DELAY(H_START); |
| bfin_write_PPI_COUNT(H_ACTPIX - 1); |
| bfin_write_PPI_FRAME(V_LINES); |
| |
| bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */ |
| PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */ |
| PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */ |
| PPI_PMODE | /* 8/16 bit data length / PACK_EN? */ |
| PPI_POLS_1); /* faling edge syncs POLS */ |
| } |
| |
| static inline void bfin_lq035q1_disable_ppi(void) |
| { |
| bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN); |
| } |
| |
| static inline void bfin_lq035q1_enable_ppi(void) |
| { |
| bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN); |
| } |
| |
| static void bfin_lq035q1_start_timers(void) |
| { |
| enable_gptimers(TIMER_VSYNCbit | TIMER_HSYNCbit); |
| } |
| |
| static void bfin_lq035q1_stop_timers(void) |
| { |
| disable_gptimers(TIMER_HSYNCbit | TIMER_VSYNCbit); |
| |
| set_gptimer_status(0, TIMER_HSYNC_STATUS_TRUN | TIMER_VSYNC_STATUS_TRUN | |
| TIMER_HSYNC_STATUS_TIMIL | TIMER_VSYNC_STATUS_TIMIL | |
| TIMER_HSYNC_STATUS_TOVF | TIMER_VSYNC_STATUS_TOVF); |
| |
| } |
| |
| static void bfin_lq035q1_init_timers(void) |
| { |
| |
| bfin_lq035q1_stop_timers(); |
| |
| set_gptimer_period(TIMER_HSYNC_id, H_PERIOD); |
| set_gptimer_pwidth(TIMER_HSYNC_id, H_PULSE); |
| set_gptimer_config(TIMER_HSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | |
| TIMER_TIN_SEL | TIMER_CLK_SEL| |
| TIMER_EMU_RUN); |
| |
| set_gptimer_period(TIMER_VSYNC_id, V_PERIOD); |
| set_gptimer_pwidth(TIMER_VSYNC_id, V_PULSE); |
| set_gptimer_config(TIMER_VSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | |
| TIMER_TIN_SEL | TIMER_CLK_SEL | |
| TIMER_EMU_RUN); |
| |
| } |
| |
| static void bfin_lq035q1_config_dma(struct bfin_lq035q1fb_info *fbi) |
| { |
| |
| set_dma_config(CH_PPI, |
| set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO, |
| INTR_DISABLE, DIMENSION_2D, |
| DATA_SIZE_16, |
| DMA_NOSYNC_KEEP_DMA_BUF)); |
| set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE); |
| set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8); |
| set_dma_y_count(CH_PPI, V_LINES); |
| |
| set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8); |
| set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer); |
| |
| } |
| |
| #if (CLOCKS_PER_PIX == 1) |
| static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, |
| P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, |
| P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, |
| P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, |
| P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, |
| P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, |
| P_PPI0_D15, 0}; |
| #else |
| static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, |
| P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, |
| P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, |
| P_PPI0_D6, P_PPI0_D7, 0}; |
| #endif |
| |
| static inline void bfin_lq035q1_free_ports(void) |
| { |
| peripheral_free_list(ppi0_req_16); |
| if (ANOMALY_05000400) |
| gpio_free(P_IDENT(P_PPI0_FS3)); |
| } |
| |
| static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev) |
| { |
| /* ANOMALY_05000400 - PPI Does Not Start Properly In Specific Mode: |
| * Drive PPI_FS3 Low |
| */ |
| if (ANOMALY_05000400) { |
| int ret = gpio_request(P_IDENT(P_PPI0_FS3), "PPI_FS3"); |
| if (ret) |
| return ret; |
| gpio_direction_output(P_IDENT(P_PPI0_FS3), 0); |
| } |
| |
| if (peripheral_request_list(ppi0_req_16, DRIVER_NAME)) { |
| dev_err(&pdev->dev, "requesting peripherals failed\n"); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static int bfin_lq035q1_fb_open(struct fb_info *info, int user) |
| { |
| struct bfin_lq035q1fb_info *fbi = info->par; |
| |
| spin_lock(&fbi->lock); |
| fbi->lq035_open_cnt++; |
| |
| if (fbi->lq035_open_cnt <= 1) { |
| |
| bfin_lq035q1_disable_ppi(); |
| SSYNC(); |
| |
| bfin_lq035q1_config_dma(fbi); |
| bfin_lq035q1_config_ppi(fbi); |
| bfin_lq035q1_init_timers(); |
| |
| /* start dma */ |
| enable_dma(CH_PPI); |
| bfin_lq035q1_enable_ppi(); |
| bfin_lq035q1_start_timers(); |
| lq035q1_backlight(fbi, 1); |
| } |
| |
| spin_unlock(&fbi->lock); |
| |
| return 0; |
| } |
| |
| static int bfin_lq035q1_fb_release(struct fb_info *info, int user) |
| { |
| struct bfin_lq035q1fb_info *fbi = info->par; |
| |
| spin_lock(&fbi->lock); |
| |
| fbi->lq035_open_cnt--; |
| |
| if (fbi->lq035_open_cnt <= 0) { |
| lq035q1_backlight(fbi, 0); |
| bfin_lq035q1_disable_ppi(); |
| SSYNC(); |
| disable_dma(CH_PPI); |
| bfin_lq035q1_stop_timers(); |
| } |
| |
| spin_unlock(&fbi->lock); |
| |
| return 0; |
| } |
| |
| static int bfin_lq035q1_fb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| switch (var->bits_per_pixel) { |
| #if (LCD_BPP == 24) |
| case 24:/* TRUECOLOUR, 16m */ |
| #else |
| case 16:/* DIRECTCOLOUR, 64k */ |
| #endif |
| var->red.offset = info->var.red.offset; |
| var->green.offset = info->var.green.offset; |
| var->blue.offset = info->var.blue.offset; |
| var->red.length = info->var.red.length; |
| var->green.length = info->var.green.length; |
| var->blue.length = info->var.blue.length; |
| var->transp.offset = 0; |
| var->transp.length = 0; |
| var->transp.msb_right = 0; |
| var->red.msb_right = 0; |
| var->green.msb_right = 0; |
| var->blue.msb_right = 0; |
| break; |
| default: |
| pr_debug("%s: depth not supported: %u BPP\n", __func__, |
| var->bits_per_pixel); |
| return -EINVAL; |
| } |
| |
| if (info->var.xres != var->xres || info->var.yres != var->yres || |
| info->var.xres_virtual != var->xres_virtual || |
| info->var.yres_virtual != var->yres_virtual) { |
| pr_debug("%s: Resolution not supported: X%u x Y%u \n", |
| __func__, var->xres, var->yres); |
| return -EINVAL; |
| } |
| |
| /* |
| * Memory limit |
| */ |
| |
| if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) { |
| pr_debug("%s: Memory Limit requested yres_virtual = %u\n", |
| __func__, var->yres_virtual); |
| return -ENOMEM; |
| } |
| |
| |
| return 0; |
| } |
| |
| int bfin_lq035q1_fb_cursor(struct fb_info *info, struct fb_cursor *cursor) |
| { |
| if (nocursor) |
| return 0; |
| else |
| return -EINVAL; /* just to force soft_cursor() call */ |
| } |
| |
| static int bfin_lq035q1_fb_setcolreg(u_int regno, u_int red, u_int green, |
| u_int blue, u_int transp, |
| struct fb_info *info) |
| { |
| if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES) |
| return -EINVAL; |
| |
| if (info->var.grayscale) { |
| /* grayscale = 0.30*R + 0.59*G + 0.11*B */ |
| red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; |
| } |
| |
| if (info->fix.visual == FB_VISUAL_TRUECOLOR) { |
| |
| u32 value; |
| /* Place color in the pseudopalette */ |
| if (regno > 16) |
| return -EINVAL; |
| |
| red >>= (16 - info->var.red.length); |
| green >>= (16 - info->var.green.length); |
| blue >>= (16 - info->var.blue.length); |
| |
| value = (red << info->var.red.offset) | |
| (green << info->var.green.offset) | |
| (blue << info->var.blue.offset); |
| value &= 0xFFFFFF; |
| |
| ((u32 *) (info->pseudo_palette))[regno] = value; |
| |
| } |
| |
| return 0; |
| } |
| |
| static struct fb_ops bfin_lq035q1_fb_ops = { |
| .owner = THIS_MODULE, |
| .fb_open = bfin_lq035q1_fb_open, |
| .fb_release = bfin_lq035q1_fb_release, |
| .fb_check_var = bfin_lq035q1_fb_check_var, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| .fb_cursor = bfin_lq035q1_fb_cursor, |
| .fb_setcolreg = bfin_lq035q1_fb_setcolreg, |
| }; |
| |
| static irqreturn_t bfin_lq035q1_irq_error(int irq, void *dev_id) |
| { |
| /*struct bfin_lq035q1fb_info *info = (struct bfin_lq035q1fb_info *)dev_id;*/ |
| |
| u16 status = bfin_read_PPI_STATUS(); |
| bfin_write_PPI_STATUS(-1); |
| |
| if (status) { |
| bfin_lq035q1_disable_ppi(); |
| disable_dma(CH_PPI); |
| |
| /* start dma */ |
| enable_dma(CH_PPI); |
| bfin_lq035q1_enable_ppi(); |
| bfin_write_PPI_STATUS(-1); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit bfin_lq035q1_probe(struct platform_device *pdev) |
| { |
| struct bfin_lq035q1fb_info *info; |
| struct fb_info *fbinfo; |
| int ret; |
| |
| ret = request_dma(CH_PPI, DRIVER_NAME"_CH_PPI"); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "PPI DMA unavailable\n"); |
| goto out1; |
| } |
| |
| fbinfo = framebuffer_alloc(sizeof(*info), &pdev->dev); |
| if (!fbinfo) { |
| ret = -ENOMEM; |
| goto out2; |
| } |
| |
| info = fbinfo->par; |
| info->fb = fbinfo; |
| info->dev = &pdev->dev; |
| |
| info->disp_info = pdev->dev.platform_data; |
| |
| platform_set_drvdata(pdev, fbinfo); |
| |
| strcpy(fbinfo->fix.id, DRIVER_NAME); |
| |
| fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; |
| fbinfo->fix.type_aux = 0; |
| fbinfo->fix.xpanstep = 0; |
| fbinfo->fix.ypanstep = 0; |
| fbinfo->fix.ywrapstep = 0; |
| fbinfo->fix.accel = FB_ACCEL_NONE; |
| fbinfo->fix.visual = FB_VISUAL_TRUECOLOR; |
| |
| fbinfo->var.nonstd = 0; |
| fbinfo->var.activate = FB_ACTIVATE_NOW; |
| fbinfo->var.height = -1; |
| fbinfo->var.width = -1; |
| fbinfo->var.accel_flags = 0; |
| fbinfo->var.vmode = FB_VMODE_NONINTERLACED; |
| |
| fbinfo->var.xres = LCD_X_RES; |
| fbinfo->var.xres_virtual = LCD_X_RES; |
| fbinfo->var.yres = LCD_Y_RES; |
| fbinfo->var.yres_virtual = LCD_Y_RES; |
| fbinfo->var.bits_per_pixel = LCD_BPP; |
| |
| if (info->disp_info->mode & LQ035_BGR) { |
| #if (LCD_BPP == 24) |
| fbinfo->var.red.offset = 0; |
| fbinfo->var.green.offset = 8; |
| fbinfo->var.blue.offset = 16; |
| #else |
| fbinfo->var.red.offset = 0; |
| fbinfo->var.green.offset = 5; |
| fbinfo->var.blue.offset = 11; |
| #endif |
| } else { |
| #if (LCD_BPP == 24) |
| fbinfo->var.red.offset = 16; |
| fbinfo->var.green.offset = 8; |
| fbinfo->var.blue.offset = 0; |
| #else |
| fbinfo->var.red.offset = 11; |
| fbinfo->var.green.offset = 5; |
| fbinfo->var.blue.offset = 0; |
| #endif |
| } |
| |
| fbinfo->var.transp.offset = 0; |
| |
| #if (LCD_BPP == 24) |
| fbinfo->var.red.length = 8; |
| fbinfo->var.green.length = 8; |
| fbinfo->var.blue.length = 8; |
| #else |
| fbinfo->var.red.length = 5; |
| fbinfo->var.green.length = 6; |
| fbinfo->var.blue.length = 5; |
| #endif |
| |
| fbinfo->var.transp.length = 0; |
| |
| fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8 |
| + ACTIVE_VIDEO_MEM_OFFSET; |
| |
| fbinfo->fix.line_length = fbinfo->var.xres_virtual * |
| fbinfo->var.bits_per_pixel / 8; |
| |
| |
| fbinfo->fbops = &bfin_lq035q1_fb_ops; |
| fbinfo->flags = FBINFO_FLAG_DEFAULT; |
| |
| info->fb_buffer = |
| dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle, |
| GFP_KERNEL); |
| |
| if (NULL == info->fb_buffer) { |
| dev_err(&pdev->dev, "couldn't allocate dma buffer\n"); |
| ret = -ENOMEM; |
| goto out3; |
| } |
| |
| fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; |
| fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; |
| |
| fbinfo->fbops = &bfin_lq035q1_fb_ops; |
| |
| fbinfo->pseudo_palette = &info->pseudo_pal; |
| |
| ret = fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to allocate colormap (%d entries)\n", |
| BFIN_LCD_NBR_PALETTE_ENTRIES); |
| goto out4; |
| } |
| |
| ret = bfin_lq035q1_request_ports(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "couldn't request gpio port\n"); |
| goto out6; |
| } |
| |
| info->irq = platform_get_irq(pdev, 0); |
| if (info->irq < 0) { |
| ret = -EINVAL; |
| goto out7; |
| } |
| |
| ret = request_irq(info->irq, bfin_lq035q1_irq_error, IRQF_DISABLED, |
| DRIVER_NAME" PPI ERROR", info); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "unable to request PPI ERROR IRQ\n"); |
| goto out7; |
| } |
| |
| info->spidrv.driver.name = DRIVER_NAME"-spi"; |
| info->spidrv.probe = lq035q1_spidev_probe; |
| info->spidrv.remove = __devexit_p(lq035q1_spidev_remove); |
| info->spidrv.shutdown = lq035q1_spidev_shutdown; |
| info->spidrv.suspend = lq035q1_spidev_suspend; |
| info->spidrv.resume = lq035q1_spidev_resume; |
| |
| ret = spi_register_driver(&info->spidrv); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "couldn't register SPI Interface\n"); |
| goto out8; |
| } |
| |
| if (info->disp_info->use_bl) { |
| ret = gpio_request(info->disp_info->gpio_bl, "LQ035 Backlight"); |
| |
| if (ret) { |
| dev_err(&pdev->dev, "failed to request GPIO %d\n", |
| info->disp_info->gpio_bl); |
| goto out9; |
| } |
| gpio_direction_output(info->disp_info->gpio_bl, 0); |
| } |
| |
| ret = register_framebuffer(fbinfo); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "unable to register framebuffer\n"); |
| goto out10; |
| } |
| |
| dev_info(&pdev->dev, "%dx%d %d-bit RGB FrameBuffer initialized\n", |
| LCD_X_RES, LCD_Y_RES, LCD_BPP); |
| |
| return 0; |
| |
| out10: |
| if (info->disp_info->use_bl) |
| gpio_free(info->disp_info->gpio_bl); |
| out9: |
| spi_unregister_driver(&info->spidrv); |
| out8: |
| free_irq(info->irq, info); |
| out7: |
| bfin_lq035q1_free_ports(); |
| out6: |
| fb_dealloc_cmap(&fbinfo->cmap); |
| out4: |
| dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer, |
| info->dma_handle); |
| out3: |
| framebuffer_release(fbinfo); |
| out2: |
| free_dma(CH_PPI); |
| out1: |
| platform_set_drvdata(pdev, NULL); |
| |
| return ret; |
| } |
| |
| static int __devexit bfin_lq035q1_remove(struct platform_device *pdev) |
| { |
| struct fb_info *fbinfo = platform_get_drvdata(pdev); |
| struct bfin_lq035q1fb_info *info = fbinfo->par; |
| |
| if (info->disp_info->use_bl) |
| gpio_free(info->disp_info->gpio_bl); |
| |
| spi_unregister_driver(&info->spidrv); |
| |
| unregister_framebuffer(fbinfo); |
| |
| free_dma(CH_PPI); |
| free_irq(info->irq, info); |
| |
| if (info->fb_buffer != NULL) |
| dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer, |
| info->dma_handle); |
| |
| fb_dealloc_cmap(&fbinfo->cmap); |
| |
| bfin_lq035q1_free_ports(); |
| |
| platform_set_drvdata(pdev, NULL); |
| framebuffer_release(fbinfo); |
| |
| dev_info(&pdev->dev, "unregistered LCD driver\n"); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int bfin_lq035q1_suspend(struct device *dev) |
| { |
| struct fb_info *fbinfo = dev_get_drvdata(dev); |
| struct bfin_lq035q1fb_info *info = fbinfo->par; |
| |
| if (info->lq035_open_cnt) { |
| lq035q1_backlight(info, 0); |
| bfin_lq035q1_disable_ppi(); |
| SSYNC(); |
| disable_dma(CH_PPI); |
| bfin_lq035q1_stop_timers(); |
| bfin_write_PPI_STATUS(-1); |
| } |
| |
| return 0; |
| } |
| |
| static int bfin_lq035q1_resume(struct device *dev) |
| { |
| struct fb_info *fbinfo = dev_get_drvdata(dev); |
| struct bfin_lq035q1fb_info *info = fbinfo->par; |
| |
| if (info->lq035_open_cnt) { |
| bfin_lq035q1_disable_ppi(); |
| SSYNC(); |
| |
| bfin_lq035q1_config_dma(info); |
| bfin_lq035q1_config_ppi(info); |
| bfin_lq035q1_init_timers(); |
| |
| /* start dma */ |
| enable_dma(CH_PPI); |
| bfin_lq035q1_enable_ppi(); |
| bfin_lq035q1_start_timers(); |
| lq035q1_backlight(info, 1); |
| } |
| |
| return 0; |
| } |
| |
| static struct dev_pm_ops bfin_lq035q1_dev_pm_ops = { |
| .suspend = bfin_lq035q1_suspend, |
| .resume = bfin_lq035q1_resume, |
| }; |
| #endif |
| |
| static struct platform_driver bfin_lq035q1_driver = { |
| .probe = bfin_lq035q1_probe, |
| .remove = __devexit_p(bfin_lq035q1_remove), |
| .driver = { |
| .name = DRIVER_NAME, |
| #ifdef CONFIG_PM |
| .pm = &bfin_lq035q1_dev_pm_ops, |
| #endif |
| }, |
| }; |
| |
| static int __init bfin_lq035q1_driver_init(void) |
| { |
| return platform_driver_register(&bfin_lq035q1_driver); |
| } |
| module_init(bfin_lq035q1_driver_init); |
| |
| static void __exit bfin_lq035q1_driver_cleanup(void) |
| { |
| platform_driver_unregister(&bfin_lq035q1_driver); |
| } |
| module_exit(bfin_lq035q1_driver_cleanup); |
| |
| MODULE_DESCRIPTION("Blackfin TFT LCD Driver"); |
| MODULE_LICENSE("GPL"); |