| /* |
| * Xen PCI - handle PCI (INTx) and MSI infrastructure calls for PV, HVM and |
| * initial domain support. We also handle the DSDT _PRT callbacks for GSI's |
| * used in HVM and initial domain mode (PV does not parse ACPI, so it has no |
| * concept of GSIs). Under PV we hook under the pnbbios API for IRQs and |
| * 0xcf8 PCI configuration read/write. |
| * |
| * Author: Ryan Wilson <hap9@epoch.ncsc.mil> |
| * Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
| * Stefano Stabellini <stefano.stabellini@eu.citrix.com> |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/acpi.h> |
| |
| #include <linux/io.h> |
| #include <asm/io_apic.h> |
| #include <asm/pci_x86.h> |
| |
| #include <asm/xen/hypervisor.h> |
| |
| #include <xen/features.h> |
| #include <xen/events.h> |
| #include <asm/xen/pci.h> |
| |
| static int xen_pcifront_enable_irq(struct pci_dev *dev) |
| { |
| int rc; |
| int share = 1; |
| int pirq; |
| u8 gsi; |
| |
| rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi); |
| if (rc < 0) { |
| dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n", |
| rc); |
| return rc; |
| } |
| /* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/ |
| pirq = gsi; |
| |
| if (gsi < NR_IRQS_LEGACY) |
| share = 0; |
| |
| rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront"); |
| if (rc < 0) { |
| dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n", |
| gsi, pirq, rc); |
| return rc; |
| } |
| |
| dev->irq = rc; |
| dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq); |
| return 0; |
| } |
| |
| #ifdef CONFIG_ACPI |
| static int xen_register_pirq(u32 gsi, int gsi_override, int triggering, |
| bool set_pirq) |
| { |
| int rc, pirq = -1, irq = -1; |
| struct physdev_map_pirq map_irq; |
| int shareable = 0; |
| char *name; |
| |
| irq = xen_irq_from_gsi(gsi); |
| if (irq > 0) |
| return irq; |
| |
| if (set_pirq) |
| pirq = gsi; |
| |
| map_irq.domid = DOMID_SELF; |
| map_irq.type = MAP_PIRQ_TYPE_GSI; |
| map_irq.index = gsi; |
| map_irq.pirq = pirq; |
| |
| rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq); |
| if (rc) { |
| printk(KERN_WARNING "xen map irq failed %d\n", rc); |
| return -1; |
| } |
| |
| if (triggering == ACPI_EDGE_SENSITIVE) { |
| shareable = 0; |
| name = "ioapic-edge"; |
| } else { |
| shareable = 1; |
| name = "ioapic-level"; |
| } |
| |
| if (gsi_override >= 0) |
| gsi = gsi_override; |
| |
| irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name); |
| if (irq < 0) |
| goto out; |
| |
| printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi); |
| out: |
| return irq; |
| } |
| |
| static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, |
| int trigger, int polarity) |
| { |
| if (!xen_hvm_domain()) |
| return -1; |
| |
| return xen_register_pirq(gsi, -1 /* no GSI override */, trigger, |
| false /* no mapping of GSI to PIRQ */); |
| } |
| |
| #ifdef CONFIG_XEN_DOM0 |
| static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity) |
| { |
| int rc, irq; |
| struct physdev_setup_gsi setup_gsi; |
| |
| if (!xen_pv_domain()) |
| return -1; |
| |
| printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n", |
| gsi, triggering, polarity); |
| |
| irq = xen_register_pirq(gsi, gsi_override, triggering, true); |
| |
| setup_gsi.gsi = gsi; |
| setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1); |
| setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1); |
| |
| rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi); |
| if (rc == -EEXIST) |
| printk(KERN_INFO "Already setup the GSI :%d\n", gsi); |
| else if (rc) { |
| printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n", |
| gsi, rc); |
| } |
| |
| return irq; |
| } |
| |
| static int acpi_register_gsi_xen(struct device *dev, u32 gsi, |
| int trigger, int polarity) |
| { |
| return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity); |
| } |
| #endif |
| #endif |
| |
| #if defined(CONFIG_PCI_MSI) |
| #include <linux/msi.h> |
| #include <asm/msidef.h> |
| |
| struct xen_pci_frontend_ops *xen_pci_frontend; |
| EXPORT_SYMBOL_GPL(xen_pci_frontend); |
| |
| static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) |
| { |
| int irq, ret, i; |
| struct msi_desc *msidesc; |
| int *v; |
| |
| if (type == PCI_CAP_ID_MSI && nvec > 1) |
| return 1; |
| |
| v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL); |
| if (!v) |
| return -ENOMEM; |
| |
| if (type == PCI_CAP_ID_MSIX) |
| ret = xen_pci_frontend_enable_msix(dev, v, nvec); |
| else |
| ret = xen_pci_frontend_enable_msi(dev, v); |
| if (ret) |
| goto error; |
| i = 0; |
| list_for_each_entry(msidesc, &dev->msi_list, list) { |
| irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0, |
| (type == PCI_CAP_ID_MSIX) ? |
| "pcifront-msi-x" : |
| "pcifront-msi", |
| DOMID_SELF); |
| if (irq < 0) { |
| ret = irq; |
| goto free; |
| } |
| i++; |
| } |
| kfree(v); |
| return 0; |
| |
| error: |
| dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n"); |
| free: |
| kfree(v); |
| return ret; |
| } |
| |
| #define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \ |
| MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0)) |
| |
| static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq, |
| struct msi_msg *msg) |
| { |
| /* We set vector == 0 to tell the hypervisor we don't care about it, |
| * but we want a pirq setup instead. |
| * We use the dest_id field to pass the pirq that we want. */ |
| msg->address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(pirq); |
| msg->address_lo = |
| MSI_ADDR_BASE_LO | |
| MSI_ADDR_DEST_MODE_PHYSICAL | |
| MSI_ADDR_REDIRECTION_CPU | |
| MSI_ADDR_DEST_ID(pirq); |
| |
| msg->data = XEN_PIRQ_MSI_DATA; |
| } |
| |
| static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) |
| { |
| int irq, pirq; |
| struct msi_desc *msidesc; |
| struct msi_msg msg; |
| |
| if (type == PCI_CAP_ID_MSI && nvec > 1) |
| return 1; |
| |
| list_for_each_entry(msidesc, &dev->msi_list, list) { |
| __read_msi_msg(msidesc, &msg); |
| pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) | |
| ((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff); |
| if (msg.data != XEN_PIRQ_MSI_DATA || |
| xen_irq_from_pirq(pirq) < 0) { |
| pirq = xen_allocate_pirq_msi(dev, msidesc); |
| if (pirq < 0) { |
| irq = -ENODEV; |
| goto error; |
| } |
| xen_msi_compose_msg(dev, pirq, &msg); |
| __write_msi_msg(msidesc, &msg); |
| dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq); |
| } else { |
| dev_dbg(&dev->dev, |
| "xen: msi already bound to pirq=%d\n", pirq); |
| } |
| irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq, 0, |
| (type == PCI_CAP_ID_MSIX) ? |
| "msi-x" : "msi", |
| DOMID_SELF); |
| if (irq < 0) |
| goto error; |
| dev_dbg(&dev->dev, |
| "xen: msi --> pirq=%d --> irq=%d\n", pirq, irq); |
| } |
| return 0; |
| |
| error: |
| dev_err(&dev->dev, |
| "Xen PCI frontend has not registered MSI/MSI-X support!\n"); |
| return irq; |
| } |
| |
| #ifdef CONFIG_XEN_DOM0 |
| static bool __read_mostly pci_seg_supported = true; |
| |
| static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) |
| { |
| int ret = 0; |
| struct msi_desc *msidesc; |
| |
| if (type == PCI_CAP_ID_MSI && nvec > 1) |
| return 1; |
| |
| list_for_each_entry(msidesc, &dev->msi_list, list) { |
| struct physdev_map_pirq map_irq; |
| domid_t domid; |
| |
| domid = ret = xen_find_device_domain_owner(dev); |
| /* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED, |
| * hence check ret value for < 0. */ |
| if (ret < 0) |
| domid = DOMID_SELF; |
| |
| memset(&map_irq, 0, sizeof(map_irq)); |
| map_irq.domid = domid; |
| map_irq.type = MAP_PIRQ_TYPE_MSI_SEG; |
| map_irq.index = -1; |
| map_irq.pirq = -1; |
| map_irq.bus = dev->bus->number | |
| (pci_domain_nr(dev->bus) << 16); |
| map_irq.devfn = dev->devfn; |
| |
| if (type == PCI_CAP_ID_MSIX) { |
| int pos; |
| u32 table_offset, bir; |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); |
| |
| pci_read_config_dword(dev, pos + PCI_MSIX_TABLE, |
| &table_offset); |
| bir = (u8)(table_offset & PCI_MSIX_FLAGS_BIRMASK); |
| |
| map_irq.table_base = pci_resource_start(dev, bir); |
| map_irq.entry_nr = msidesc->msi_attrib.entry_nr; |
| } |
| |
| ret = -EINVAL; |
| if (pci_seg_supported) |
| ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, |
| &map_irq); |
| if (ret == -EINVAL && !pci_domain_nr(dev->bus)) { |
| map_irq.type = MAP_PIRQ_TYPE_MSI; |
| map_irq.index = -1; |
| map_irq.pirq = -1; |
| map_irq.bus = dev->bus->number; |
| ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, |
| &map_irq); |
| if (ret != -EINVAL) |
| pci_seg_supported = false; |
| } |
| if (ret) { |
| dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n", |
| ret, domid); |
| goto out; |
| } |
| |
| ret = xen_bind_pirq_msi_to_irq(dev, msidesc, |
| map_irq.pirq, map_irq.index, |
| (type == PCI_CAP_ID_MSIX) ? |
| "msi-x" : "msi", |
| domid); |
| if (ret < 0) |
| goto out; |
| } |
| ret = 0; |
| out: |
| return ret; |
| } |
| |
| static void xen_initdom_restore_msi_irqs(struct pci_dev *dev, int irq) |
| { |
| int ret = 0; |
| |
| if (pci_seg_supported) { |
| struct physdev_pci_device restore_ext; |
| |
| restore_ext.seg = pci_domain_nr(dev->bus); |
| restore_ext.bus = dev->bus->number; |
| restore_ext.devfn = dev->devfn; |
| ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi_ext, |
| &restore_ext); |
| if (ret == -ENOSYS) |
| pci_seg_supported = false; |
| WARN(ret && ret != -ENOSYS, "restore_msi_ext -> %d\n", ret); |
| } |
| if (!pci_seg_supported) { |
| struct physdev_restore_msi restore; |
| |
| restore.bus = dev->bus->number; |
| restore.devfn = dev->devfn; |
| ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi, &restore); |
| WARN(ret && ret != -ENOSYS, "restore_msi -> %d\n", ret); |
| } |
| } |
| #endif |
| |
| static void xen_teardown_msi_irqs(struct pci_dev *dev) |
| { |
| struct msi_desc *msidesc; |
| |
| msidesc = list_entry(dev->msi_list.next, struct msi_desc, list); |
| if (msidesc->msi_attrib.is_msix) |
| xen_pci_frontend_disable_msix(dev); |
| else |
| xen_pci_frontend_disable_msi(dev); |
| |
| /* Free the IRQ's and the msidesc using the generic code. */ |
| default_teardown_msi_irqs(dev); |
| } |
| |
| static void xen_teardown_msi_irq(unsigned int irq) |
| { |
| xen_destroy_irq(irq); |
| } |
| |
| #endif |
| |
| int __init pci_xen_init(void) |
| { |
| if (!xen_pv_domain() || xen_initial_domain()) |
| return -ENODEV; |
| |
| printk(KERN_INFO "PCI: setting up Xen PCI frontend stub\n"); |
| |
| pcibios_set_cache_line_size(); |
| |
| pcibios_enable_irq = xen_pcifront_enable_irq; |
| pcibios_disable_irq = NULL; |
| |
| #ifdef CONFIG_ACPI |
| /* Keep ACPI out of the picture */ |
| acpi_noirq = 1; |
| #endif |
| |
| #ifdef CONFIG_PCI_MSI |
| x86_msi.setup_msi_irqs = xen_setup_msi_irqs; |
| x86_msi.teardown_msi_irq = xen_teardown_msi_irq; |
| x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs; |
| #endif |
| return 0; |
| } |
| |
| int __init pci_xen_hvm_init(void) |
| { |
| if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs)) |
| return 0; |
| |
| #ifdef CONFIG_ACPI |
| /* |
| * We don't want to change the actual ACPI delivery model, |
| * just how GSIs get registered. |
| */ |
| __acpi_register_gsi = acpi_register_gsi_xen_hvm; |
| #endif |
| |
| #ifdef CONFIG_PCI_MSI |
| x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs; |
| x86_msi.teardown_msi_irq = xen_teardown_msi_irq; |
| #endif |
| return 0; |
| } |
| |
| #ifdef CONFIG_XEN_DOM0 |
| static __init void xen_setup_acpi_sci(void) |
| { |
| int rc; |
| int trigger, polarity; |
| int gsi = acpi_sci_override_gsi; |
| int irq = -1; |
| int gsi_override = -1; |
| |
| if (!gsi) |
| return; |
| |
| rc = acpi_get_override_irq(gsi, &trigger, &polarity); |
| if (rc) { |
| printk(KERN_WARNING "xen: acpi_get_override_irq failed for acpi" |
| " sci, rc=%d\n", rc); |
| return; |
| } |
| trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; |
| polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; |
| |
| printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d " |
| "polarity=%d\n", gsi, trigger, polarity); |
| |
| /* Before we bind the GSI to a Linux IRQ, check whether |
| * we need to override it with bus_irq (IRQ) value. Usually for |
| * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so: |
| * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| * but there are oddballs where the IRQ != GSI: |
| * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) |
| * which ends up being: gsi_to_irq[9] == 20 |
| * (which is what acpi_gsi_to_irq ends up calling when starting the |
| * the ACPI interpreter and keels over since IRQ 9 has not been |
| * setup as we had setup IRQ 20 for it). |
| */ |
| if (acpi_gsi_to_irq(gsi, &irq) == 0) { |
| /* Use the provided value if it's valid. */ |
| if (irq >= 0) |
| gsi_override = irq; |
| } |
| |
| gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity); |
| printk(KERN_INFO "xen: acpi sci %d\n", gsi); |
| |
| return; |
| } |
| |
| int __init pci_xen_initial_domain(void) |
| { |
| int irq; |
| |
| #ifdef CONFIG_PCI_MSI |
| x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs; |
| x86_msi.teardown_msi_irq = xen_teardown_msi_irq; |
| x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs; |
| #endif |
| xen_setup_acpi_sci(); |
| __acpi_register_gsi = acpi_register_gsi_xen; |
| /* Pre-allocate legacy irqs */ |
| for (irq = 0; irq < NR_IRQS_LEGACY; irq++) { |
| int trigger, polarity; |
| |
| if (acpi_get_override_irq(irq, &trigger, &polarity) == -1) |
| continue; |
| |
| xen_register_pirq(irq, -1 /* no GSI override */, |
| trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE, |
| true /* Map GSI to PIRQ */); |
| } |
| if (0 == nr_ioapics) { |
| for (irq = 0; irq < NR_IRQS_LEGACY; irq++) |
| xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic"); |
| } |
| return 0; |
| } |
| |
| struct xen_device_domain_owner { |
| domid_t domain; |
| struct pci_dev *dev; |
| struct list_head list; |
| }; |
| |
| static DEFINE_SPINLOCK(dev_domain_list_spinlock); |
| static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list); |
| |
| static struct xen_device_domain_owner *find_device(struct pci_dev *dev) |
| { |
| struct xen_device_domain_owner *owner; |
| |
| list_for_each_entry(owner, &dev_domain_list, list) { |
| if (owner->dev == dev) |
| return owner; |
| } |
| return NULL; |
| } |
| |
| int xen_find_device_domain_owner(struct pci_dev *dev) |
| { |
| struct xen_device_domain_owner *owner; |
| int domain = -ENODEV; |
| |
| spin_lock(&dev_domain_list_spinlock); |
| owner = find_device(dev); |
| if (owner) |
| domain = owner->domain; |
| spin_unlock(&dev_domain_list_spinlock); |
| return domain; |
| } |
| EXPORT_SYMBOL_GPL(xen_find_device_domain_owner); |
| |
| int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain) |
| { |
| struct xen_device_domain_owner *owner; |
| |
| owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL); |
| if (!owner) |
| return -ENODEV; |
| |
| spin_lock(&dev_domain_list_spinlock); |
| if (find_device(dev)) { |
| spin_unlock(&dev_domain_list_spinlock); |
| kfree(owner); |
| return -EEXIST; |
| } |
| owner->domain = domain; |
| owner->dev = dev; |
| list_add_tail(&owner->list, &dev_domain_list); |
| spin_unlock(&dev_domain_list_spinlock); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(xen_register_device_domain_owner); |
| |
| int xen_unregister_device_domain_owner(struct pci_dev *dev) |
| { |
| struct xen_device_domain_owner *owner; |
| |
| spin_lock(&dev_domain_list_spinlock); |
| owner = find_device(dev); |
| if (!owner) { |
| spin_unlock(&dev_domain_list_spinlock); |
| return -ENODEV; |
| } |
| list_del(&owner->list); |
| spin_unlock(&dev_domain_list_spinlock); |
| kfree(owner); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner); |
| #endif |