pinctrl/abx500: beautify the ABX500 pin control driver
This patch provides some superficial changes to the driver to
aid with readability and maintainability. We're mostly fixing
things like white-space errors, spreading out code which as
been clumped together impeding readability and comment layout,
such as using the new "/**" comment start for function headers
etc. No code semantics were harmed in the making of this patch.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index 305a9cb..426b47c 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -127,7 +127,7 @@
}
static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg,
- unsigned offset, bool *bit)
+ unsigned offset, bool *bit)
{
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
u8 pos = offset % 8;
@@ -149,7 +149,7 @@
}
static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
- unsigned offset, int val)
+ unsigned offset, int val)
{
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
u8 pos = offset % 8;
@@ -160,12 +160,14 @@
AB8500_MISC, reg, BIT(pos), val << pos);
if (ret < 0)
dev_err(pct->dev, "%s write failed\n", __func__);
+
return ret;
}
+
/**
* abx500_gpio_get() - Get the particular GPIO value
- * @chip: Gpio device
- * @offset: GPIO number to read
+ * @chip: Gpio device
+ * @offset: GPIO number to read
*/
static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset)
{
@@ -179,6 +181,7 @@
dev_err(pct->dev, "%s failed\n", __func__);
return ret;
}
+
return bit;
}
@@ -193,7 +196,7 @@
}
static int abx500_config_pull_updown(struct abx500_pinctrl *pct,
- int offset, enum abx500_gpio_pull_updown val)
+ int offset, enum abx500_gpio_pull_updown val)
{
u8 pos;
int ret;
@@ -223,6 +226,7 @@
out:
if (ret < 0)
dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
+
return ret;
}
@@ -234,6 +238,7 @@
struct pullud *pullud = pct->soc->pullud;
unsigned gpio;
int ret;
+
/* set direction as output */
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1);
if (ret < 0)
@@ -253,6 +258,7 @@
if (ret < 0)
return ret;
}
+
/* set the output as 1 or 0 */
return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
}
@@ -284,13 +290,14 @@
}
static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
- unsigned gpio, int alt_setting)
+ unsigned gpio, int alt_setting)
{
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
struct alternate_functions af = pct->soc->alternate_functions[gpio];
int ret;
int val;
unsigned offset;
+
const char *modes[] = {
[ABX500_DEFAULT] = "default",
[ABX500_ALT_A] = "altA",
@@ -309,6 +316,7 @@
/* on ABx5xx, there is no GPIO0, so adjust the offset */
offset = gpio - 1;
+
switch (alt_setting) {
case ABX500_DEFAULT:
/*
@@ -324,6 +332,7 @@
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
offset, val);
break;
+
case ABX500_ALT_A:
/*
* for ABx5xx family, alt_a mode is always selected by
@@ -348,6 +357,7 @@
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
offset, 1);
break;
+
case ABX500_ALT_B:
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
offset, 0);
@@ -359,6 +369,7 @@
af.alt_bit2,
!!(af.altb_val && BIT(1)));
break;
+
case ABX500_ALT_C:
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
offset, 0);
@@ -370,13 +381,15 @@
default:
dev_dbg(pct->dev, "unknow alt_setting %d\n", alt_setting);
+
return -EINVAL;
}
+
return ret;
}
static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
- unsigned gpio)
+ unsigned gpio)
{
u8 mode;
bool bit_mode;
@@ -404,6 +417,7 @@
"alt_bitX value not in correct range (-1 to 7)\n");
return -EINVAL;
}
+
/* if alt_bit2 is used, alt_bit1 must be used too */
if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) {
dev_err(pct->dev,
@@ -420,6 +434,7 @@
*/
if (mode)
return ABX500_DEFAULT;
+
/*
* pin use the AlternatFunction register
* read alt_bit1 value
@@ -448,8 +463,9 @@
#include <linux/seq_file.h>
static void abx500_gpio_dbg_show_one(struct seq_file *s,
- struct pinctrl_dev *pctldev, struct gpio_chip *chip,
- unsigned offset, unsigned gpio)
+ struct pinctrl_dev *pctldev,
+ struct gpio_chip *chip,
+ unsigned offset, unsigned gpio)
{
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
const char *label = gpiochip_is_requested(chip, offset - 1);
@@ -457,6 +473,7 @@
int mode = -1;
bool is_out;
bool pull;
+
const char *modes[] = {
[ABX500_DEFAULT] = "default",
[ABX500_ALT_A] = "altA",
@@ -516,9 +533,9 @@
#else
static inline void abx500_gpio_dbg_show_one(struct seq_file *s,
- struct pinctrl_dev *pctldev,
- struct gpio_chip *chip,
- unsigned offset, unsigned gpio)
+ struct pinctrl_dev *pctldev,
+ struct gpio_chip *chip,
+ unsigned offset, unsigned gpio)
{
}
#define abx500_gpio_dbg_show NULL
@@ -780,9 +797,9 @@
}
static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev,
- unsigned function,
- const char * const **groups,
- unsigned * const num_groups)
+ unsigned function,
+ const char * const **groups,
+ unsigned * const num_groups)
{
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
@@ -830,7 +847,7 @@
}
static int abx500_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
- unsigned group)
+ unsigned group)
{
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
struct gpio_chip *chip = &pct->chip;
@@ -851,11 +868,12 @@
abx500_disable_lazy_irq(chip, g->pins[i]);
ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting);
}
+
return ret;
}
static void abx500_pmx_disable(struct pinctrl_dev *pctldev,
- unsigned function, unsigned group)
+ unsigned function, unsigned group)
{
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
const struct abx500_pingroup *g;
@@ -869,8 +887,8 @@
}
int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range,
- unsigned offset)
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
{
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
const struct abx500_pinrange *p;
@@ -908,8 +926,8 @@
}
static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range,
- unsigned offset)
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
{
}
@@ -931,7 +949,7 @@
}
static const char *abx500_get_group_name(struct pinctrl_dev *pctldev,
- unsigned selector)
+ unsigned selector)
{
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
@@ -939,19 +957,20 @@
}
static int abx500_get_group_pins(struct pinctrl_dev *pctldev,
- unsigned selector,
- const unsigned **pins,
- unsigned *num_pins)
+ unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
{
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
*pins = pct->soc->groups[selector].pins;
*num_pins = pct->soc->groups[selector].npins;
+
return 0;
}
static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev,
- struct seq_file *s, unsigned offset)
+ struct seq_file *s, unsigned offset)
{
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
struct gpio_chip *chip = &pct->chip;
@@ -968,15 +987,15 @@
};
int abx500_pin_config_get(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *config)
+ unsigned pin,
+ unsigned long *config)
{
return -ENOSYS;
}
int abx500_pin_config_set(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long config)
+ unsigned pin,
+ unsigned long config)
{
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
struct pullud *pullud = pct->soc->pullud;
@@ -990,6 +1009,7 @@
pin, config, (param == PIN_CONFIG_OUTPUT) ? "output " : "input",
(param == PIN_CONFIG_OUTPUT) ? (argument ? "high" : "low") :
(argument ? "pull up" : "pull down"));
+
/* on ABx500, there is no GPIO0, so adjust the offset */
offset = pin - 1;
@@ -1018,13 +1038,18 @@
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG,
offset, argument ? 0 : 1);
break;
+
case PIN_CONFIG_OUTPUT:
ret = abx500_gpio_direction_output(chip, offset, argument);
+
break;
+
default:
dev_err(chip->dev, "illegal configuration requested\n");
+
return -EINVAL;
}
+
return ret;
}
@@ -1090,7 +1115,7 @@
int i;
pdata = abx500_pdata->gpio;
- if (!pdata) {
+ if (!pdata) {
dev_err(&pdev->dev, "gpio platform data missing\n");
return -ENODEV;
}
@@ -1150,8 +1175,7 @@
goto out_free;
ret = gpiochip_add(&pct->chip);
if (ret) {
- dev_err(&pdev->dev, "unable to add gpiochip: %d\n",
- ret);
+ dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
goto out_rem_irq;
}
dev_info(&pdev->dev, "added gpiochip\n");
@@ -1193,9 +1217,9 @@
return ret;
}
-/*
+/**
* abx500_gpio_remove() - remove Ab8500-gpio driver
- * @pdev : Platform device registered
+ * @pdev: Platform device registered
*/
static int abx500_gpio_remove(struct platform_device *pdev)
{