tools/firewire: nosy-dump: use linux/firewire-constants.h

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
diff --git a/tools/firewire/decode-fcp.c b/tools/firewire/decode-fcp.c
index 9cd1550..e41223b 100644
--- a/tools/firewire/decode-fcp.c
+++ b/tools/firewire/decode-fcp.c
@@ -1,5 +1,7 @@
-#include <stdlib.h>
+#include <linux/firewire-constants.h>
 #include <stdio.h>
+#include <stdlib.h>
+
 #include "list.h"
 #include "nosy-dump.h"
 
@@ -176,7 +178,7 @@
 	    ((unsigned long long) t->request->packet.common.offset_high << 32) |
 	    t->request->packet.common.offset_low;
 
-	if (t->request->packet.common.tcode != TCODE_WRITE_BLOCK)
+	if (t->request->packet.common.tcode != TCODE_WRITE_BLOCK_REQUEST)
 		return 0;
 
 	if (offset == CSR_FCP_COMMAND || offset == CSR_FCP_RESPONSE) {
diff --git a/tools/firewire/nosy-dump.c b/tools/firewire/nosy-dump.c
index 32c4855..5241cb4 100644
--- a/tools/firewire/nosy-dump.c
+++ b/tools/firewire/nosy-dump.c
@@ -20,6 +20,7 @@
 #include <byteswap.h>
 #include <endian.h>
 #include <fcntl.h>
+#include <linux/firewire-constants.h>
 #include <poll.h>
 #include <popt.h>
 #include <signal.h>
@@ -522,8 +523,8 @@
 
 	switch (sa->ack) {
 	case ACK_COMPLETE:
-		if (p->common.tcode != TCODE_WRITE_QUADLET &&
-		    p->common.tcode != TCODE_WRITE_BLOCK)
+		if (p->common.tcode != TCODE_WRITE_QUADLET_REQUEST &&
+		    p->common.tcode != TCODE_WRITE_BLOCK_REQUEST)
 			/* error, unified transactions only allowed for write */;
 		list_remove(&t->link);
 		handle_transaction(t);
@@ -967,7 +968,7 @@
 
 		filter = ~0;
 		if (!option_iso)
-			filter &= ~(1 << TCODE_ISO_DATA);
+			filter &= ~(1 << TCODE_STREAM_DATA);
 		if (!option_cycle_start)
 			filter &= ~(1 << TCODE_CYCLE_START);
 		if (view == VIEW_STATS)
diff --git a/tools/firewire/nosy-dump.h b/tools/firewire/nosy-dump.h
index fe8be63..3a4b5b33 100644
--- a/tools/firewire/nosy-dump.h
+++ b/tools/firewire/nosy-dump.h
@@ -3,36 +3,11 @@
 
 #define array_length(array) (sizeof(array) / sizeof(array[0]))
 
-#define TCODE_WRITE_QUADLET         0x0
-#define TCODE_WRITE_BLOCK           0x1
-#define TCODE_WRITE_RESPONSE        0x2
-#define TCODE_READ_QUADLET          0x4
-#define TCODE_READ_BLOCK            0x5
-#define TCODE_READ_QUADLET_RESPONSE 0x6
-#define TCODE_READ_BLOCK_RESPONSE   0x7
-#define TCODE_CYCLE_START           0x8
-#define TCODE_LOCK_REQUEST          0x9
-#define TCODE_ISO_DATA              0xa
-#define TCODE_LOCK_RESPONSE         0xb
-#define TCODE_PHY_PACKET            0x10
-
-#define ACK_NO_ACK               0x0
-#define ACK_COMPLETE             0x1
-#define ACK_PENDING              0x2
-#define ACK_BUSY_X               0x4
-#define ACK_BUSY_A               0x5
-#define ACK_BUSY_B               0x6
-#define ACK_DATA_ERROR           0xd
-#define ACK_TYPE_ERROR           0xe 
-
+#define ACK_NO_ACK   0x0
 #define ACK_DONE(a)  ((a >> 2) == 0)
 #define ACK_BUSY(a)  ((a >> 2) == 1)
 #define ACK_ERROR(a) ((a >> 2) == 3)
 
-#define SPEED_100                0x0
-#define SPEED_200                0x1
-#define SPEED_400                0x2
-
 #include <stdint.h>
 
 struct phy_packet {
@@ -92,6 +67,8 @@
 	uint32_t ack;
 };
 
+#define TCODE_PHY_PACKET 0x10
+
 #define PHY_PACKET_CONFIGURATION 0x00
 #define PHY_PACKET_LINK_ON 0x01
 #define PHY_PACKET_SELF_ID 0x02