serial: imx: drop members from driver data that are only used during probe

There is no benefit in keeping this information in RAM when it's not
used any more, so better use function local variables instead.

These members are unused since c0d1c6b0f0dc ("serial: imx: Fix the
reporting of interrupts")

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 9e3a8ff..6525198 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -206,7 +206,6 @@
 	struct uart_port	port;
 	struct timer_list	timer;
 	unsigned int		old_status;
-	int			txirq, rxirq, rtsirq;
 	unsigned int		have_rtscts:1;
 	unsigned int		dte_mode:1;
 	unsigned int		use_irda:1;
@@ -1956,6 +1955,7 @@
 	void __iomem *base;
 	int ret = 0;
 	struct resource *res;
+	int txirq, rxirq, rtsirq;
 
 	sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
 	if (!sport)
@@ -1972,15 +1972,16 @@
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
+	rxirq = platform_get_irq(pdev, 0);
+	txirq = platform_get_irq(pdev, 1);
+	rtsirq = platform_get_irq(pdev, 2);
+
 	sport->port.dev = &pdev->dev;
 	sport->port.mapbase = res->start;
 	sport->port.membase = base;
 	sport->port.type = PORT_IMX,
 	sport->port.iotype = UPIO_MEM;
-	sport->port.irq = platform_get_irq(pdev, 0);
-	sport->rxirq = platform_get_irq(pdev, 0);
-	sport->txirq = platform_get_irq(pdev, 1);
-	sport->rtsirq = platform_get_irq(pdev, 2);
+	sport->port.irq = rxirq;
 	sport->port.fifosize = 32;
 	sport->port.ops = &imx_pops;
 	sport->port.flags = UPF_BOOT_AUTOCONF;
@@ -2008,27 +2009,27 @@
 	 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
 	 * chips only have one interrupt.
 	 */
-	if (sport->txirq > 0) {
-		ret = devm_request_irq(&pdev->dev, sport->rxirq, imx_rxint, 0,
+	if (txirq > 0) {
+		ret = devm_request_irq(&pdev->dev, rxirq, imx_rxint, 0,
 				       dev_name(&pdev->dev), sport);
 		if (ret)
 			return ret;
 
-		ret = devm_request_irq(&pdev->dev, sport->txirq, imx_txint, 0,
+		ret = devm_request_irq(&pdev->dev, txirq, imx_txint, 0,
 				       dev_name(&pdev->dev), sport);
 		if (ret)
 			return ret;
 
 		/* do not use RTS IRQ on IrDA */
 		if (!USE_IRDA(sport)) {
-			ret = devm_request_irq(&pdev->dev, sport->rtsirq,
+			ret = devm_request_irq(&pdev->dev, rtsirq,
 					       imx_rtsint, 0,
 					       dev_name(&pdev->dev), sport);
 			if (ret)
 				return ret;
 		}
 	} else {
-		ret = devm_request_irq(&pdev->dev, sport->port.irq, imx_int, 0,
+		ret = devm_request_irq(&pdev->dev, rxirq, imx_int, 0,
 				       dev_name(&pdev->dev), sport);
 		if (ret)
 			return ret;