| /* |
| * linux/arch/arm/mach-mmp/mmp2.c |
| * |
| * code name MMP2 |
| * |
| * Copyright (C) 2009 Marvell International Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/hardware/cache-tauros2.h> |
| |
| #include <asm/mach/time.h> |
| #include <mach/addr-map.h> |
| #include <mach/regs-apbc.h> |
| #include <mach/cputype.h> |
| #include <mach/irqs.h> |
| #include <mach/dma.h> |
| #include <mach/mfp.h> |
| #include <mach/devices.h> |
| #include <mach/mmp2.h> |
| |
| #include "common.h" |
| |
| #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) |
| |
| static struct mfp_addr_map mmp2_addr_map[] __initdata = { |
| |
| MFP_ADDR_X(GPIO0, GPIO58, 0x54), |
| MFP_ADDR_X(GPIO59, GPIO73, 0x280), |
| MFP_ADDR_X(GPIO74, GPIO101, 0x170), |
| |
| MFP_ADDR(GPIO102, 0x0), |
| MFP_ADDR(GPIO103, 0x4), |
| MFP_ADDR(GPIO104, 0x1fc), |
| MFP_ADDR(GPIO105, 0x1f8), |
| MFP_ADDR(GPIO106, 0x1f4), |
| MFP_ADDR(GPIO107, 0x1f0), |
| MFP_ADDR(GPIO108, 0x21c), |
| MFP_ADDR(GPIO109, 0x218), |
| MFP_ADDR(GPIO110, 0x214), |
| MFP_ADDR(GPIO111, 0x200), |
| MFP_ADDR(GPIO112, 0x244), |
| MFP_ADDR(GPIO113, 0x25c), |
| MFP_ADDR(GPIO114, 0x164), |
| MFP_ADDR_X(GPIO115, GPIO122, 0x260), |
| |
| MFP_ADDR(GPIO123, 0x148), |
| MFP_ADDR_X(GPIO124, GPIO141, 0xc), |
| |
| MFP_ADDR(GPIO142, 0x8), |
| MFP_ADDR_X(GPIO143, GPIO151, 0x220), |
| MFP_ADDR_X(GPIO152, GPIO153, 0x248), |
| MFP_ADDR_X(GPIO154, GPIO155, 0x254), |
| MFP_ADDR_X(GPIO156, GPIO159, 0x14c), |
| |
| MFP_ADDR(GPIO160, 0x250), |
| MFP_ADDR(GPIO161, 0x210), |
| MFP_ADDR(GPIO162, 0x20c), |
| MFP_ADDR(GPIO163, 0x208), |
| MFP_ADDR(GPIO164, 0x204), |
| MFP_ADDR(GPIO165, 0x1ec), |
| MFP_ADDR(GPIO166, 0x1e8), |
| MFP_ADDR(GPIO167, 0x1e4), |
| MFP_ADDR(GPIO168, 0x1e0), |
| |
| MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140), |
| MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc), |
| |
| MFP_ADDR(PMIC_INT, 0x2c4), |
| MFP_ADDR(CLK_REQ, 0x160), |
| |
| MFP_ADDR_END, |
| }; |
| |
| void mmp2_clear_pmic_int(void) |
| { |
| void __iomem *mfpr_pmic; |
| unsigned long data; |
| |
| mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4; |
| data = __raw_readl(mfpr_pmic); |
| __raw_writel(data | (1 << 6), mfpr_pmic); |
| __raw_writel(data, mfpr_pmic); |
| } |
| |
| void __init mmp2_init_irq(void) |
| { |
| mmp2_init_icu(); |
| } |
| |
| static int __init mmp2_init(void) |
| { |
| if (cpu_is_mmp2()) { |
| #ifdef CONFIG_CACHE_TAUROS2 |
| tauros2_init(); |
| #endif |
| mfp_init_base(MFPR_VIRT_BASE); |
| mfp_init_addr(mmp2_addr_map); |
| pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16); |
| mmp2_clk_init(); |
| } |
| |
| return 0; |
| } |
| postcore_initcall(mmp2_init); |
| |
| #define APBC_TIMERS APBC_REG(0x024) |
| |
| static void __init mmp2_timer_init(void) |
| { |
| unsigned long clk_rst; |
| |
| __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); |
| |
| /* |
| * enable bus/functional clock, enable 6.5MHz (divider 4), |
| * release reset |
| */ |
| clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1); |
| __raw_writel(clk_rst, APBC_TIMERS); |
| |
| timer_init(IRQ_MMP2_TIMER1); |
| } |
| |
| struct sys_timer mmp2_timer = { |
| .init = mmp2_timer_init, |
| }; |
| |
| /* on-chip devices */ |
| MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5); |
| MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21); |
| MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23); |
| MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19); |
| MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70); |
| MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70); |
| MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70); |
| MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70); |
| MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70); |
| MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70); |
| MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29); |
| MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120); |
| MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120); |
| MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120); |
| MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120); |
| MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000); |
| /* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */ |
| MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000); |
| |
| struct resource mmp2_resource_gpio[] = { |
| { |
| .start = 0xd4019000, |
| .end = 0xd4019fff, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = IRQ_MMP2_GPIO, |
| .end = IRQ_MMP2_GPIO, |
| .name = "gpio_mux", |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| struct platform_device mmp2_device_gpio = { |
| .name = "pxa-gpio", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(mmp2_resource_gpio), |
| .resource = mmp2_resource_gpio, |
| }; |