| /****************************************************************************** |
| * |
| * Module Name: nsarguments - Validation of args for ACPI predefined methods |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2013, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acnamesp.h" |
| #include "acpredef.h" |
| |
| #define _COMPONENT ACPI_NAMESPACE |
| ACPI_MODULE_NAME("nsarguments") |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ns_check_argument_types |
| * |
| * PARAMETERS: info - Method execution information block |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Check the incoming argument count and all argument types |
| * against the argument type list for a predefined name. |
| * |
| ******************************************************************************/ |
| void acpi_ns_check_argument_types(struct acpi_evaluate_info *info) |
| { |
| u16 arg_type_list; |
| u8 arg_count; |
| u8 arg_type; |
| u8 user_arg_type; |
| u32 i; |
| |
| /* If not a predefined name, cannot typecheck args */ |
| |
| if (!info->predefined) { |
| return; |
| } |
| |
| arg_type_list = info->predefined->info.argument_list; |
| arg_count = METHOD_GET_ARG_COUNT(arg_type_list); |
| |
| /* Typecheck all arguments */ |
| |
| for (i = 0; ((i < arg_count) && (i < info->param_count)); i++) { |
| arg_type = METHOD_GET_NEXT_TYPE(arg_type_list); |
| user_arg_type = info->parameters[i]->common.type; |
| |
| if (user_arg_type != arg_type) { |
| ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, |
| ACPI_WARN_ALWAYS, |
| "Argument #%u type mismatch - " |
| "Found [%s], ACPI requires [%s]", |
| (i + 1), |
| acpi_ut_get_type_name |
| (user_arg_type), |
| acpi_ut_get_type_name(arg_type))); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ns_check_acpi_compliance |
| * |
| * PARAMETERS: pathname - Full pathname to the node (for error msgs) |
| * node - Namespace node for the method/object |
| * predefined - Pointer to entry in predefined name table |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Check that the declared parameter count (in ASL/AML) for a |
| * predefined name is what is expected (matches what is defined in |
| * the ACPI specification for this predefined name.) |
| * |
| ******************************************************************************/ |
| |
| void |
| acpi_ns_check_acpi_compliance(char *pathname, |
| struct acpi_namespace_node *node, |
| const union acpi_predefined_info *predefined) |
| { |
| u32 aml_param_count; |
| u32 required_param_count; |
| |
| if (!predefined) { |
| return; |
| } |
| |
| /* Get the ACPI-required arg count from the predefined info table */ |
| |
| required_param_count = |
| METHOD_GET_ARG_COUNT(predefined->info.argument_list); |
| |
| /* |
| * If this object is not a control method, we can check if the ACPI |
| * spec requires that it be a method. |
| */ |
| if (node->type != ACPI_TYPE_METHOD) { |
| if (required_param_count > 0) { |
| |
| /* Object requires args, must be implemented as a method */ |
| |
| ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, |
| ACPI_WARN_ALWAYS, |
| "Object (%s) must be a control method with %u arguments", |
| acpi_ut_get_type_name(node-> |
| type), |
| required_param_count)); |
| } else if (!required_param_count |
| && !predefined->info.expected_btypes) { |
| |
| /* Object requires no args and no return value, must be a method */ |
| |
| ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, |
| ACPI_WARN_ALWAYS, |
| "Object (%s) must be a control method " |
| "with no arguments and no return value", |
| acpi_ut_get_type_name(node-> |
| type))); |
| } |
| |
| return; |
| } |
| |
| /* |
| * This is a control method. |
| * Check that the ASL/AML-defined parameter count for this method |
| * matches the ACPI-required parameter count |
| * |
| * Some methods are allowed to have a "minimum" number of args (_SCP) |
| * because their definition in ACPI has changed over time. |
| * |
| * Note: These are BIOS errors in the declaration of the object |
| */ |
| aml_param_count = node->object->method.param_count; |
| |
| if (aml_param_count < required_param_count) { |
| ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, |
| "Insufficient arguments - " |
| "ASL declared %u, ACPI requires %u", |
| aml_param_count, |
| required_param_count)); |
| } else if ((aml_param_count > required_param_count) |
| && !(predefined->info. |
| argument_list & ARG_COUNT_IS_MINIMUM)) { |
| ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, |
| "Excess arguments - " |
| "ASL declared %u, ACPI requires %u", |
| aml_param_count, |
| required_param_count)); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ns_check_argument_count |
| * |
| * PARAMETERS: pathname - Full pathname to the node (for error msgs) |
| * node - Namespace node for the method/object |
| * user_param_count - Number of args passed in by the caller |
| * predefined - Pointer to entry in predefined name table |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Check that incoming argument count matches the declared |
| * parameter count (in the ASL/AML) for an object. |
| * |
| ******************************************************************************/ |
| |
| void |
| acpi_ns_check_argument_count(char *pathname, |
| struct acpi_namespace_node *node, |
| u32 user_param_count, |
| const union acpi_predefined_info *predefined) |
| { |
| u32 aml_param_count; |
| u32 required_param_count; |
| |
| if (!predefined) { |
| /* |
| * Not a predefined name. Check the incoming user argument count |
| * against the count that is specified in the method/object. |
| */ |
| if (node->type != ACPI_TYPE_METHOD) { |
| if (user_param_count) { |
| ACPI_INFO_PREDEFINED((AE_INFO, pathname, |
| ACPI_WARN_ALWAYS, |
| "%u arguments were passed to a non-method ACPI object (%s)", |
| user_param_count, |
| acpi_ut_get_type_name |
| (node->type))); |
| } |
| |
| return; |
| } |
| |
| /* |
| * This is a control method. Check the parameter count. |
| * We can only check the incoming argument count against the |
| * argument count declared for the method in the ASL/AML. |
| * |
| * Emit a message if too few or too many arguments have been passed |
| * by the caller. |
| * |
| * Note: Too many arguments will not cause the method to |
| * fail. However, the method will fail if there are too few |
| * arguments and the method attempts to use one of the missing ones. |
| */ |
| aml_param_count = node->object->method.param_count; |
| |
| if (user_param_count < aml_param_count) { |
| ACPI_WARN_PREDEFINED((AE_INFO, pathname, |
| ACPI_WARN_ALWAYS, |
| "Insufficient arguments - " |
| "Caller passed %u, method requires %u", |
| user_param_count, |
| aml_param_count)); |
| } else if (user_param_count > aml_param_count) { |
| ACPI_INFO_PREDEFINED((AE_INFO, pathname, |
| ACPI_WARN_ALWAYS, |
| "Excess arguments - " |
| "Caller passed %u, method requires %u", |
| user_param_count, |
| aml_param_count)); |
| } |
| |
| return; |
| } |
| |
| /* |
| * This is a predefined name. Validate the user-supplied parameter |
| * count against the ACPI specification. We don't validate against |
| * the method itself because what is important here is that the |
| * caller is in conformance with the spec. (The arg count for the |
| * method was checked against the ACPI spec earlier.) |
| * |
| * Some methods are allowed to have a "minimum" number of args (_SCP) |
| * because their definition in ACPI has changed over time. |
| */ |
| required_param_count = |
| METHOD_GET_ARG_COUNT(predefined->info.argument_list); |
| |
| if (user_param_count < required_param_count) { |
| ACPI_WARN_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, |
| "Insufficient arguments - " |
| "Caller passed %u, ACPI requires %u", |
| user_param_count, required_param_count)); |
| } else if ((user_param_count > required_param_count) && |
| !(predefined->info.argument_list & ARG_COUNT_IS_MINIMUM)) { |
| ACPI_INFO_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, |
| "Excess arguments - " |
| "Caller passed %u, ACPI requires %u", |
| user_param_count, required_param_count)); |
| } |
| } |