ide: add ide_device_add()
* Add ide_device_add() helper and convert host drivers to use it
instead of open-coded variants.
* Make ide_pci_setup_ports() and do_ide_setup_pci_device()
take 'u8 *idx' argument instead of 'ata_index_t *index'.
* Remove no longer needed ata_index_t.
* Unexport probe_hwif_init() and make it static.
* Unexport ide_proc_register_port().
There should be no functionality changes caused by this patch
(sgiioc4.c: ide_proc_register_port() requires hwif->present
to be set and it won't be set if probe_hwif_init() fails).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 4e9de20..252cb8c 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -512,7 +512,7 @@
* @dev: PCI device
* @d: IDE pci device info
* @pciirq: IRQ line
- * @index: ata index to update
+ * @idx: ATA index table to update
*
* Scan the interfaces attached to this device and do any
* necessary per port setup. Attach the devices and ask the
@@ -522,15 +522,13 @@
* but is also used directly as a helper function by some controllers
* where the chipset setup is not the default PCI IDE one.
*/
-
-void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, ata_index_t *index)
+
+void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, u8 *idx)
{
int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
ide_hwif_t *hwif, *mate = NULL;
u8 tmp;
- index->all = 0xf0f0;
-
/*
* Set up the IDE ports
*/
@@ -550,11 +548,7 @@
/* setup proper ancestral information */
hwif->gendev.parent = &dev->dev;
- if (hwif->channel) {
- index->b.high = hwif->index;
- } else {
- index->b.low = hwif->index;
- }
+ *(idx + port) = hwif->index;
if (d->init_iops)
@@ -620,9 +614,8 @@
* for all other chipsets, we just assume both interfaces are enabled.
*/
static int do_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d,
- ata_index_t *index, u8 noisy)
+ u8 *idx, u8 noisy)
{
- static ata_index_t ata_index = { .b = { .low = 0xff, .high = 0xff } };
int tried_config = 0;
int pciirq, ret;
@@ -672,37 +665,21 @@
/* FIXME: silent failure can happen */
- *index = ata_index;
- ide_pci_setup_ports(dev, d, pciirq, index);
+ ide_pci_setup_ports(dev, d, pciirq, idx);
out:
return ret;
}
int ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d)
{
- ide_hwif_t *hwif = NULL, *mate = NULL;
- ata_index_t index_list;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
int ret;
- ret = do_ide_setup_pci_device(dev, d, &index_list, 1);
- if (ret < 0)
- goto out;
+ ret = do_ide_setup_pci_device(dev, d, &idx[0], 1);
- if ((index_list.b.low & 0xf0) != 0xf0)
- hwif = &ide_hwifs[index_list.b.low];
- if ((index_list.b.high & 0xf0) != 0xf0)
- mate = &ide_hwifs[index_list.b.high];
+ if (ret >= 0)
+ ide_device_add(idx);
- if (hwif)
- probe_hwif_init(hwif);
- if (mate)
- probe_hwif_init(mate);
-
- if (hwif)
- ide_proc_register_port(hwif);
- if (mate)
- ide_proc_register_port(mate);
-out:
return ret;
}
@@ -712,11 +689,11 @@
ide_pci_device_t *d)
{
struct pci_dev *pdev[] = { dev1, dev2 };
- ata_index_t index_list[2];
int ret, i;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
for (i = 0; i < 2; i++) {
- ret = do_ide_setup_pci_device(pdev[i], d, index_list + i, !i);
+ ret = do_ide_setup_pci_device(pdev[i], d, &idx[i*2], !i);
/*
* FIXME: Mom, mom, they stole me the helper function to undo
* do_ide_setup_pci_device() on the first device!
@@ -725,25 +702,7 @@
goto out;
}
- for (i = 0; i < 2; i++) {
- u8 idx[2] = { index_list[i].b.low, index_list[i].b.high };
- int j;
-
- for (j = 0; j < 2; j++) {
- if ((idx[j] & 0xf0) != 0xf0)
- probe_hwif_init(ide_hwifs + idx[j]);
- }
- }
-
- for (i = 0; i < 2; i++) {
- u8 idx[2] = { index_list[i].b.low, index_list[i].b.high };
- int j;
-
- for (j = 0; j < 2; j++) {
- if ((idx[j] & 0xf0) != 0xf0)
- ide_proc_register_port(ide_hwifs + idx[j]);
- }
- }
+ ide_device_add(idx);
out:
return ret;
}