| /* |
| * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * Based on "omap4.dtsi" |
| */ |
| |
| #include "dra7.dtsi" |
| |
| / { |
| compatible = "ti,dra742", "ti,dra74", "ti,dra7"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0>; |
| |
| operating-points = < |
| /* kHz uV */ |
| 1000000 1060000 |
| 1176000 1160000 |
| >; |
| |
| clocks = <&dpll_mpu_ck>; |
| clock-names = "cpu"; |
| |
| clock-latency = <300000>; /* From omap-cpufreq driver */ |
| |
| /* cooling options */ |
| cooling-min-level = <0>; |
| cooling-max-level = <2>; |
| #cooling-cells = <2>; /* min followed by max */ |
| }; |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <1>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a15-pmu"; |
| interrupt-parent = <&wakeupgen>; |
| interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| ocp { |
| dsp2_system: dsp_system@41500000 { |
| compatible = "syscon"; |
| reg = <0x41500000 0x100>; |
| }; |
| |
| omap_dwc3_4: omap_dwc3_4@48940000 { |
| compatible = "ti,dwc3"; |
| ti,hwmods = "usb_otg_ss4"; |
| reg = <0x48940000 0x10000>; |
| interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| utmi-mode = <2>; |
| ranges; |
| status = "disabled"; |
| usb4: usb@48950000 { |
| compatible = "snps,dwc3"; |
| reg = <0x48950000 0x17000>; |
| interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "peripheral", |
| "host", |
| "otg"; |
| maximum-speed = "high-speed"; |
| dr_mode = "otg"; |
| }; |
| }; |
| |
| mmu0_dsp2: mmu@41501000 { |
| compatible = "ti,dra7-dsp-iommu"; |
| reg = <0x41501000 0x100>; |
| interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| ti,hwmods = "mmu0_dsp2"; |
| #iommu-cells = <0>; |
| ti,syscon-mmuconfig = <&dsp2_system 0x0>; |
| status = "disabled"; |
| }; |
| |
| mmu1_dsp2: mmu@41502000 { |
| compatible = "ti,dra7-dsp-iommu"; |
| reg = <0x41502000 0x100>; |
| interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; |
| ti,hwmods = "mmu1_dsp2"; |
| #iommu-cells = <0>; |
| ti,syscon-mmuconfig = <&dsp2_system 0x1>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| &dss { |
| reg = <0x58000000 0x80>, |
| <0x58004054 0x4>, |
| <0x58004300 0x20>, |
| <0x58005054 0x4>, |
| <0x58005300 0x20>; |
| reg-names = "dss", "pll1_clkctrl", "pll1", |
| "pll2_clkctrl", "pll2"; |
| |
| clocks = <&dss_dss_clk>, |
| <&dss_video1_clk>, |
| <&dss_video2_clk>; |
| clock-names = "fck", "video1_clk", "video2_clk"; |
| }; |
| |
| &mailbox5 { |
| mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { |
| ti,mbox-tx = <6 2 2>; |
| ti,mbox-rx = <4 2 2>; |
| status = "disabled"; |
| }; |
| mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { |
| ti,mbox-tx = <5 2 2>; |
| ti,mbox-rx = <1 2 2>; |
| status = "disabled"; |
| }; |
| }; |
| |
| &mailbox6 { |
| mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { |
| ti,mbox-tx = <6 2 2>; |
| ti,mbox-rx = <4 2 2>; |
| status = "disabled"; |
| }; |
| mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { |
| ti,mbox-tx = <5 2 2>; |
| ti,mbox-rx = <1 2 2>; |
| status = "disabled"; |
| }; |
| }; |