| /******************************************************************************* |
| AudioScience HPI driver |
| Common Linux HPI ioctl and module probe/remove functions |
| |
| Copyright (C) 1997-2014 AudioScience Inc. <support@audioscience.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of version 2 of the GNU General Public License as |
| published by the Free Software Foundation; |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| *******************************************************************************/ |
| #define SOURCEFILE_NAME "hpioctl.c" |
| |
| #include "hpi_internal.h" |
| #include "hpi_version.h" |
| #include "hpimsginit.h" |
| #include "hpidebug.h" |
| #include "hpimsgx.h" |
| #include "hpioctl.h" |
| #include "hpicmn.h" |
| |
| #include <linux/fs.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/moduleparam.h> |
| #include <linux/uaccess.h> |
| #include <linux/pci.h> |
| #include <linux/stringify.h> |
| #include <linux/module.h> |
| #include <linux/vmalloc.h> |
| #include <linux/nospec.h> |
| |
| #ifdef MODULE_FIRMWARE |
| MODULE_FIRMWARE("asihpi/dsp5000.bin"); |
| MODULE_FIRMWARE("asihpi/dsp6200.bin"); |
| MODULE_FIRMWARE("asihpi/dsp6205.bin"); |
| MODULE_FIRMWARE("asihpi/dsp6400.bin"); |
| MODULE_FIRMWARE("asihpi/dsp6600.bin"); |
| MODULE_FIRMWARE("asihpi/dsp8700.bin"); |
| MODULE_FIRMWARE("asihpi/dsp8900.bin"); |
| #endif |
| |
| static int prealloc_stream_buf; |
| module_param(prealloc_stream_buf, int, S_IRUGO); |
| MODULE_PARM_DESC(prealloc_stream_buf, |
| "Preallocate size for per-adapter stream buffer"); |
| |
| /* Allow the debug level to be changed after module load. |
| E.g. echo 2 > /sys/module/asihpi/parameters/hpiDebugLevel |
| */ |
| module_param(hpi_debug_level, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(hpi_debug_level, "debug verbosity 0..5"); |
| |
| /* List of adapters found */ |
| static struct hpi_adapter adapters[HPI_MAX_ADAPTERS]; |
| |
| /* Wrapper function to HPI_Message to enable dumping of the |
| message and response types. |
| */ |
| static void hpi_send_recv_f(struct hpi_message *phm, struct hpi_response *phr, |
| struct file *file) |
| { |
| if ((phm->adapter_index >= HPI_MAX_ADAPTERS) |
| && (phm->object != HPI_OBJ_SUBSYSTEM)) |
| phr->error = HPI_ERROR_INVALID_OBJ_INDEX; |
| else |
| hpi_send_recv_ex(phm, phr, file); |
| } |
| |
| /* This is called from hpifunc.c functions, called by ALSA |
| * (or other kernel process) In this case there is no file descriptor |
| * available for the message cache code |
| */ |
| void hpi_send_recv(struct hpi_message *phm, struct hpi_response *phr) |
| { |
| hpi_send_recv_f(phm, phr, HOWNER_KERNEL); |
| } |
| |
| EXPORT_SYMBOL(hpi_send_recv); |
| /* for radio-asihpi */ |
| |
| int asihpi_hpi_release(struct file *file) |
| { |
| struct hpi_message hm; |
| struct hpi_response hr; |
| |
| /* HPI_DEBUG_LOG(INFO,"hpi_release file %p, pid %d\n", file, current->pid); */ |
| /* close the subsystem just in case the application forgot to. */ |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM, |
| HPI_SUBSYS_CLOSE); |
| hpi_send_recv_ex(&hm, &hr, file); |
| return 0; |
| } |
| |
| long asihpi_hpi_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct hpi_ioctl_linux __user *phpi_ioctl_data; |
| void __user *puhm; |
| void __user *puhr; |
| union hpi_message_buffer_v1 *hm; |
| union hpi_response_buffer_v1 *hr; |
| u16 res_max_size; |
| u32 uncopied_bytes; |
| int err = 0; |
| |
| if (cmd != HPI_IOCTL_LINUX) |
| return -EINVAL; |
| |
| hm = kmalloc(sizeof(*hm), GFP_KERNEL); |
| hr = kzalloc(sizeof(*hr), GFP_KERNEL); |
| if (!hm || !hr) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| phpi_ioctl_data = (struct hpi_ioctl_linux __user *)arg; |
| |
| /* Read the message and response pointers from user space. */ |
| if (get_user(puhm, &phpi_ioctl_data->phm) |
| || get_user(puhr, &phpi_ioctl_data->phr)) { |
| err = -EFAULT; |
| goto out; |
| } |
| |
| /* Now read the message size and data from user space. */ |
| if (get_user(hm->h.size, (u16 __user *)puhm)) { |
| err = -EFAULT; |
| goto out; |
| } |
| if (hm->h.size > sizeof(*hm)) |
| hm->h.size = sizeof(*hm); |
| |
| /* printk(KERN_INFO "message size %d\n", hm->h.wSize); */ |
| |
| uncopied_bytes = copy_from_user(hm, puhm, hm->h.size); |
| if (uncopied_bytes) { |
| HPI_DEBUG_LOG(ERROR, "uncopied bytes %d\n", uncopied_bytes); |
| err = -EFAULT; |
| goto out; |
| } |
| |
| if (get_user(res_max_size, (u16 __user *)puhr)) { |
| err = -EFAULT; |
| goto out; |
| } |
| /* printk(KERN_INFO "user response size %d\n", res_max_size); */ |
| if (res_max_size < sizeof(struct hpi_response_header)) { |
| HPI_DEBUG_LOG(WARNING, "small res size %d\n", res_max_size); |
| err = -EFAULT; |
| goto out; |
| } |
| |
| res_max_size = min_t(size_t, res_max_size, sizeof(*hr)); |
| |
| switch (hm->h.function) { |
| case HPI_SUBSYS_CREATE_ADAPTER: |
| case HPI_ADAPTER_DELETE: |
| /* Application must not use these functions! */ |
| hr->h.size = sizeof(hr->h); |
| hr->h.error = HPI_ERROR_INVALID_OPERATION; |
| hr->h.function = hm->h.function; |
| uncopied_bytes = copy_to_user(puhr, hr, hr->h.size); |
| if (uncopied_bytes) |
| err = -EFAULT; |
| else |
| err = 0; |
| goto out; |
| } |
| |
| hr->h.size = res_max_size; |
| if (hm->h.object == HPI_OBJ_SUBSYSTEM) { |
| hpi_send_recv_f(&hm->m0, &hr->r0, file); |
| } else { |
| u16 __user *ptr = NULL; |
| u32 size = 0; |
| /* -1=no data 0=read from user mem, 1=write to user mem */ |
| int wrflag = -1; |
| struct hpi_adapter *pa = NULL; |
| |
| if (hm->h.adapter_index < ARRAY_SIZE(adapters)) |
| pa = &adapters[array_index_nospec(hm->h.adapter_index, |
| ARRAY_SIZE(adapters))]; |
| |
| if (!pa || !pa->adapter || !pa->adapter->type) { |
| hpi_init_response(&hr->r0, hm->h.object, |
| hm->h.function, HPI_ERROR_BAD_ADAPTER_NUMBER); |
| |
| uncopied_bytes = |
| copy_to_user(puhr, hr, sizeof(hr->h)); |
| if (uncopied_bytes) |
| err = -EFAULT; |
| else |
| err = 0; |
| goto out; |
| } |
| |
| if (mutex_lock_interruptible(&pa->mutex)) { |
| err = -EINTR; |
| goto out; |
| } |
| |
| /* Dig out any pointers embedded in the message. */ |
| switch (hm->h.function) { |
| case HPI_OSTREAM_WRITE: |
| case HPI_ISTREAM_READ:{ |
| /* Yes, sparse, this is correct. */ |
| ptr = (u16 __user *)hm->m0.u.d.u.data.pb_data; |
| size = hm->m0.u.d.u.data.data_size; |
| |
| /* Allocate buffer according to application request. |
| ?Is it better to alloc/free for the duration |
| of the transaction? |
| */ |
| if (pa->buffer_size < size) { |
| HPI_DEBUG_LOG(DEBUG, |
| "Realloc adapter %d stream " |
| "buffer from %zd to %d\n", |
| hm->h.adapter_index, |
| pa->buffer_size, size); |
| if (pa->p_buffer) { |
| pa->buffer_size = 0; |
| vfree(pa->p_buffer); |
| } |
| pa->p_buffer = vmalloc(size); |
| if (pa->p_buffer) |
| pa->buffer_size = size; |
| else { |
| HPI_DEBUG_LOG(ERROR, |
| "HPI could not allocate " |
| "stream buffer size %d\n", |
| size); |
| |
| mutex_unlock(&pa->mutex); |
| err = -EINVAL; |
| goto out; |
| } |
| } |
| |
| hm->m0.u.d.u.data.pb_data = pa->p_buffer; |
| if (hm->h.function == HPI_ISTREAM_READ) |
| /* from card, WRITE to user mem */ |
| wrflag = 1; |
| else |
| wrflag = 0; |
| break; |
| } |
| |
| default: |
| size = 0; |
| break; |
| } |
| |
| if (size && (wrflag == 0)) { |
| uncopied_bytes = |
| copy_from_user(pa->p_buffer, ptr, size); |
| if (uncopied_bytes) |
| HPI_DEBUG_LOG(WARNING, |
| "Missed %d of %d " |
| "bytes from user\n", uncopied_bytes, |
| size); |
| } |
| |
| hpi_send_recv_f(&hm->m0, &hr->r0, file); |
| |
| if (size && (wrflag == 1)) { |
| uncopied_bytes = |
| copy_to_user(ptr, pa->p_buffer, size); |
| if (uncopied_bytes) |
| HPI_DEBUG_LOG(WARNING, |
| "Missed %d of %d " "bytes to user\n", |
| uncopied_bytes, size); |
| } |
| |
| mutex_unlock(&pa->mutex); |
| } |
| |
| /* on return response size must be set */ |
| /*printk(KERN_INFO "response size %d\n", hr->h.wSize); */ |
| |
| if (!hr->h.size) { |
| HPI_DEBUG_LOG(ERROR, "response zero size\n"); |
| err = -EFAULT; |
| goto out; |
| } |
| |
| if (hr->h.size > res_max_size) { |
| HPI_DEBUG_LOG(ERROR, "response too big %d %d\n", hr->h.size, |
| res_max_size); |
| hr->h.error = HPI_ERROR_RESPONSE_BUFFER_TOO_SMALL; |
| hr->h.specific_error = hr->h.size; |
| hr->h.size = sizeof(hr->h); |
| } |
| |
| uncopied_bytes = copy_to_user(puhr, hr, hr->h.size); |
| if (uncopied_bytes) { |
| HPI_DEBUG_LOG(ERROR, "uncopied bytes %d\n", uncopied_bytes); |
| err = -EFAULT; |
| goto out; |
| } |
| |
| out: |
| kfree(hm); |
| kfree(hr); |
| return err; |
| } |
| |
| static int asihpi_irq_count; |
| |
| static irqreturn_t asihpi_isr(int irq, void *dev_id) |
| { |
| struct hpi_adapter *a = dev_id; |
| int handled; |
| |
| if (!a->adapter->irq_query_and_clear) { |
| pr_err("asihpi_isr ASI%04X:%d no handler\n", a->adapter->type, |
| a->adapter->index); |
| return IRQ_NONE; |
| } |
| |
| handled = a->adapter->irq_query_and_clear(a->adapter, 0); |
| |
| if (!handled) |
| return IRQ_NONE; |
| |
| asihpi_irq_count++; |
| /* printk(KERN_INFO "asihpi_isr %d ASI%04X:%d irq handled\n", |
| asihpi_irq_count, a->adapter->type, a->adapter->index); */ |
| |
| if (a->interrupt_callback) |
| a->interrupt_callback(a); |
| |
| return IRQ_HANDLED; |
| } |
| |
| int asihpi_adapter_probe(struct pci_dev *pci_dev, |
| const struct pci_device_id *pci_id) |
| { |
| int idx, nm, low_latency_mode = 0, irq_supported = 0; |
| int adapter_index; |
| unsigned int memlen; |
| struct hpi_message hm; |
| struct hpi_response hr; |
| struct hpi_adapter adapter; |
| struct hpi_pci pci; |
| |
| memset(&adapter, 0, sizeof(adapter)); |
| |
| dev_printk(KERN_DEBUG, &pci_dev->dev, |
| "probe %04x:%04x,%04x:%04x,%04x\n", pci_dev->vendor, |
| pci_dev->device, pci_dev->subsystem_vendor, |
| pci_dev->subsystem_device, pci_dev->devfn); |
| |
| if (pci_enable_device(pci_dev) < 0) { |
| dev_err(&pci_dev->dev, |
| "pci_enable_device failed, disabling device\n"); |
| return -EIO; |
| } |
| |
| pci_set_master(pci_dev); /* also sets latency timer if < 16 */ |
| |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM, |
| HPI_SUBSYS_CREATE_ADAPTER); |
| hpi_init_response(&hr, HPI_OBJ_SUBSYSTEM, HPI_SUBSYS_CREATE_ADAPTER, |
| HPI_ERROR_PROCESSING_MESSAGE); |
| |
| hm.adapter_index = HPI_ADAPTER_INDEX_INVALID; |
| |
| nm = HPI_MAX_ADAPTER_MEM_SPACES; |
| |
| for (idx = 0; idx < nm; idx++) { |
| HPI_DEBUG_LOG(INFO, "resource %d %pR\n", idx, |
| &pci_dev->resource[idx]); |
| |
| if (pci_resource_flags(pci_dev, idx) & IORESOURCE_MEM) { |
| memlen = pci_resource_len(pci_dev, idx); |
| pci.ap_mem_base[idx] = |
| ioremap(pci_resource_start(pci_dev, idx), |
| memlen); |
| if (!pci.ap_mem_base[idx]) { |
| HPI_DEBUG_LOG(ERROR, |
| "ioremap failed, aborting\n"); |
| /* unmap previously mapped pci mem space */ |
| goto err; |
| } |
| } |
| } |
| |
| pci.pci_dev = pci_dev; |
| hm.u.s.resource.bus_type = HPI_BUS_PCI; |
| hm.u.s.resource.r.pci = &pci; |
| |
| /* call CreateAdapterObject on the relevant hpi module */ |
| hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); |
| if (hr.error) |
| goto err; |
| |
| adapter_index = hr.u.s.adapter_index; |
| adapter.adapter = hpi_find_adapter(adapter_index); |
| |
| if (prealloc_stream_buf) { |
| adapter.p_buffer = vmalloc(prealloc_stream_buf); |
| if (!adapter.p_buffer) { |
| HPI_DEBUG_LOG(ERROR, |
| "HPI could not allocate " |
| "kernel buffer size %d\n", |
| prealloc_stream_buf); |
| goto err; |
| } |
| } |
| |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, |
| HPI_ADAPTER_OPEN); |
| hm.adapter_index = adapter.adapter->index; |
| hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); |
| |
| if (hr.error) { |
| HPI_DEBUG_LOG(ERROR, "HPI_ADAPTER_OPEN failed, aborting\n"); |
| goto err; |
| } |
| |
| /* Check if current mode == Low Latency mode */ |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, |
| HPI_ADAPTER_GET_MODE); |
| hm.adapter_index = adapter.adapter->index; |
| hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); |
| |
| if (!hr.error |
| && hr.u.ax.mode.adapter_mode == HPI_ADAPTER_MODE_LOW_LATENCY) |
| low_latency_mode = 1; |
| else |
| dev_info(&pci_dev->dev, |
| "Adapter at index %d is not in low latency mode\n", |
| adapter.adapter->index); |
| |
| /* Check if IRQs are supported */ |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, |
| HPI_ADAPTER_GET_PROPERTY); |
| hm.adapter_index = adapter.adapter->index; |
| hm.u.ax.property_set.property = HPI_ADAPTER_PROPERTY_SUPPORTS_IRQ; |
| hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); |
| if (hr.error || !hr.u.ax.property_get.parameter1) { |
| dev_info(&pci_dev->dev, |
| "IRQs not supported by adapter at index %d\n", |
| adapter.adapter->index); |
| } else { |
| irq_supported = 1; |
| } |
| |
| /* WARNING can't init mutex in 'adapter' |
| * and then copy it to adapters[] ?!?! |
| */ |
| adapters[adapter_index] = adapter; |
| mutex_init(&adapters[adapter_index].mutex); |
| pci_set_drvdata(pci_dev, &adapters[adapter_index]); |
| |
| if (low_latency_mode && irq_supported) { |
| if (!adapter.adapter->irq_query_and_clear) { |
| dev_err(&pci_dev->dev, |
| "no IRQ handler for adapter %d, aborting\n", |
| adapter.adapter->index); |
| goto err; |
| } |
| |
| /* Disable IRQ generation on DSP side by setting the rate to 0 */ |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, |
| HPI_ADAPTER_SET_PROPERTY); |
| hm.adapter_index = adapter.adapter->index; |
| hm.u.ax.property_set.property = HPI_ADAPTER_PROPERTY_IRQ_RATE; |
| hm.u.ax.property_set.parameter1 = 0; |
| hm.u.ax.property_set.parameter2 = 0; |
| hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); |
| if (hr.error) { |
| HPI_DEBUG_LOG(ERROR, |
| "HPI_ADAPTER_GET_MODE failed, aborting\n"); |
| goto err; |
| } |
| |
| /* Note: request_irq calls asihpi_isr here */ |
| if (request_irq(pci_dev->irq, asihpi_isr, IRQF_SHARED, |
| "asihpi", &adapters[adapter_index])) { |
| dev_err(&pci_dev->dev, "request_irq(%d) failed\n", |
| pci_dev->irq); |
| goto err; |
| } |
| |
| adapters[adapter_index].interrupt_mode = 1; |
| |
| dev_info(&pci_dev->dev, "using irq %d\n", pci_dev->irq); |
| adapters[adapter_index].irq = pci_dev->irq; |
| } else { |
| dev_info(&pci_dev->dev, "using polled mode\n"); |
| } |
| |
| dev_info(&pci_dev->dev, "probe succeeded for ASI%04X HPI index %d\n", |
| adapter.adapter->type, adapter_index); |
| |
| return 0; |
| |
| err: |
| for (idx = 0; idx < HPI_MAX_ADAPTER_MEM_SPACES; idx++) { |
| if (pci.ap_mem_base[idx]) { |
| iounmap(pci.ap_mem_base[idx]); |
| pci.ap_mem_base[idx] = NULL; |
| } |
| } |
| |
| if (adapter.p_buffer) { |
| adapter.buffer_size = 0; |
| vfree(adapter.p_buffer); |
| } |
| |
| HPI_DEBUG_LOG(ERROR, "adapter_probe failed\n"); |
| return -ENODEV; |
| } |
| |
| void asihpi_adapter_remove(struct pci_dev *pci_dev) |
| { |
| int idx; |
| struct hpi_message hm; |
| struct hpi_response hr; |
| struct hpi_adapter *pa; |
| struct hpi_pci pci; |
| |
| pa = pci_get_drvdata(pci_dev); |
| pci = pa->adapter->pci; |
| |
| /* Disable IRQ generation on DSP side */ |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, |
| HPI_ADAPTER_SET_PROPERTY); |
| hm.adapter_index = pa->adapter->index; |
| hm.u.ax.property_set.property = HPI_ADAPTER_PROPERTY_IRQ_RATE; |
| hm.u.ax.property_set.parameter1 = 0; |
| hm.u.ax.property_set.parameter2 = 0; |
| hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); |
| |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, |
| HPI_ADAPTER_DELETE); |
| hm.adapter_index = pa->adapter->index; |
| hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); |
| |
| /* unmap PCI memory space, mapped during device init. */ |
| for (idx = 0; idx < HPI_MAX_ADAPTER_MEM_SPACES; ++idx) |
| iounmap(pci.ap_mem_base[idx]); |
| |
| if (pa->irq) |
| free_irq(pa->irq, pa); |
| |
| vfree(pa->p_buffer); |
| |
| if (1) |
| dev_info(&pci_dev->dev, |
| "remove %04x:%04x,%04x:%04x,%04x, HPI index %d\n", |
| pci_dev->vendor, pci_dev->device, |
| pci_dev->subsystem_vendor, pci_dev->subsystem_device, |
| pci_dev->devfn, pa->adapter->index); |
| |
| memset(pa, 0, sizeof(*pa)); |
| } |
| |
| void __init asihpi_init(void) |
| { |
| struct hpi_message hm; |
| struct hpi_response hr; |
| |
| memset(adapters, 0, sizeof(adapters)); |
| |
| printk(KERN_INFO "ASIHPI driver " HPI_VER_STRING "\n"); |
| |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM, |
| HPI_SUBSYS_DRIVER_LOAD); |
| hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); |
| } |
| |
| void asihpi_exit(void) |
| { |
| struct hpi_message hm; |
| struct hpi_response hr; |
| |
| hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM, |
| HPI_SUBSYS_DRIVER_UNLOAD); |
| hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); |
| } |