[SCSI] lpfc 8.2.8 : Add new FCOE hardware support
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 9f94dab..ee4e501 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1107,6 +1107,8 @@
/* Start FireFly Register definitions */
#define PCI_VENDOR_ID_EMULEX 0x10df
#define PCI_DEVICE_ID_FIREFLY 0x1ae5
+#define PCI_DEVICE_ID_PROTEUS_VF 0xe100
+#define PCI_DEVICE_ID_PROTEUS_PF 0xe180
#define PCI_DEVICE_ID_SAT_SMB 0xf011
#define PCI_DEVICE_ID_SAT_MID 0xf015
#define PCI_DEVICE_ID_RFLY 0xf095
@@ -1133,10 +1135,12 @@
#define PCI_DEVICE_ID_LP11000S 0xfc10
#define PCI_DEVICE_ID_LPE11000S 0xfc20
#define PCI_DEVICE_ID_SAT_S 0xfc40
+#define PCI_DEVICE_ID_PROTEUS_S 0xfc50
#define PCI_DEVICE_ID_HELIOS 0xfd00
#define PCI_DEVICE_ID_HELIOS_SCSP 0xfd11
#define PCI_DEVICE_ID_HELIOS_DCSP 0xfd12
#define PCI_DEVICE_ID_ZEPHYR 0xfe00
+#define PCI_DEVICE_ID_HORNET 0xfe05
#define PCI_DEVICE_ID_ZEPHYR_SCSP 0xfe11
#define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12
@@ -1154,6 +1158,7 @@
#define ZEPHYR_JEDEC_ID 0x0577
#define VIPER_JEDEC_ID 0x4838
#define SATURN_JEDEC_ID 0x1004
+#define HORNET_JDEC_ID 0x2057706D
#define JEDEC_ID_MASK 0x0FFFF000
#define JEDEC_ID_SHIFT 12
@@ -1289,6 +1294,9 @@
#define MBX_WRITE_VPARMS 0x32
#define MBX_ASYNCEVT_ENABLE 0x33
+#define MBX_PORT_CAPABILITIES 0x3B
+#define MBX_PORT_IOV_CONTROL 0x3C
+
#define MBX_CONFIG_HBQ 0x7C
#define MBX_LOAD_AREA 0x81
#define MBX_RUN_BIU_DIAG64 0x84
@@ -2195,7 +2203,10 @@
typedef struct {
uint32_t eventTag; /* Event tag */
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd1:22;
+ uint32_t rsvd1:19;
+ uint32_t fa:1;
+ uint32_t mm:1; /* Menlo Maintenance mode enabled */
+ uint32_t rx:1;
uint32_t pb:1;
uint32_t il:1;
uint32_t attType:8;
@@ -2203,7 +2214,10 @@
uint32_t attType:8;
uint32_t il:1;
uint32_t pb:1;
- uint32_t rsvd1:22;
+ uint32_t rx:1;
+ uint32_t mm:1;
+ uint32_t fa:1;
+ uint32_t rsvd1:19;
#endif
#define AT_RESERVED 0x00 /* Reserved - attType */
@@ -2224,6 +2238,7 @@
#define TOPOLOGY_PT_PT 0x01 /* Topology is pt-pt / pt-fabric */
#define TOPOLOGY_LOOP 0x02 /* Topology is FC-AL */
+#define TOPOLOGY_LNK_MENLO_MAINTENANCE 0x05 /* maint mode zephtr to menlo */
union {
struct ulp_bde lilpBde; /* This BDE points to a 128 byte buffer
@@ -3346,3 +3361,10 @@
iocbp->un.ulpWord[4] == IOERR_LINK_DOWN ||
iocbp->un.ulpWord[4] == IOERR_SLI_DOWN));
}
+
+#define MENLO_TRANSPORT_TYPE 0xfe
+#define MENLO_CONTEXT 0
+#define MENLO_PU 3
+#define MENLO_TIMEOUT 30
+#define SETVAR_MLOMNT 0x103107
+#define SETVAR_MLORST 0x103007