Input: wacom - check for bluetooth protocol while setting OLEDs
Bluetooth Intuos 4 use 1-bit definition while the USB ones use a 4-bits
definition. This changes the size of the raw image we receive, and thus
the kernel will only accept 1-bit images for Bluetooth and 4-bits for
USB.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index f5c9c56..a12cd9c 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -20,6 +20,7 @@
#define WAC_CMD_LED_CONTROL 0x20
#define WAC_CMD_ICON_START 0x21
#define WAC_CMD_ICON_XFER 0x23
+#define WAC_CMD_ICON_BT_XFER 0x26
#define WAC_CMD_RETRIES 10
static int wacom_get_report(struct hid_device *hdev, u8 type, u8 id,
@@ -526,12 +527,14 @@
return retval;
}
-static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *img)
+static int wacom_led_putimage(struct wacom *wacom, int button_id, u8 xfer_id,
+ const unsigned len, const void *img)
{
unsigned char *buf;
int i, retval;
+ const unsigned chunk_len = len / 4; /* 4 chunks are needed to be sent */
- buf = kzalloc(259, GFP_KERNEL);
+ buf = kzalloc(chunk_len + 3 , GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -543,15 +546,15 @@
if (retval < 0)
goto out;
- buf[0] = WAC_CMD_ICON_XFER;
+ buf[0] = xfer_id;
buf[1] = button_id & 0x07;
for (i = 0; i < 4; i++) {
buf[2] = i;
- memcpy(buf + 3, img + i * 256, 256);
+ memcpy(buf + 3, img + i * chunk_len, chunk_len);
retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT,
- WAC_CMD_ICON_XFER,
- buf, 259, WAC_CMD_RETRIES);
+ xfer_id, buf, chunk_len + 3,
+ WAC_CMD_RETRIES);
if (retval < 0)
break;
}
@@ -652,13 +655,23 @@
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
struct wacom *wacom = hid_get_drvdata(hdev);
int err;
+ unsigned len;
+ u8 xfer_id;
- if (count != 1024)
+ if (hdev->bus == BUS_BLUETOOTH) {
+ len = 256;
+ xfer_id = WAC_CMD_ICON_BT_XFER;
+ } else {
+ len = 1024;
+ xfer_id = WAC_CMD_ICON_XFER;
+ }
+
+ if (count != len)
return -EINVAL;
mutex_lock(&wacom->lock);
- err = wacom_led_putimage(wacom, button_id, buf);
+ err = wacom_led_putimage(wacom, button_id, xfer_id, len, buf);
mutex_unlock(&wacom->lock);