* Qualcomm Technologies, Inc. MSM Camera ICP

The MSM camera ICP devices are implemented multiple device nodes.
The root icp device node has properties defined to hint the driver
about the number of A5,IPE and BPS nodes available during the
probe sequence. Each node has multiple properties defined
for interrupts, clocks and regulators.

=======================
Required Node Structure
=======================
ICP root interface node takes care of the handling account for number
of A5, IPE and BPS devices present on the hardware.

- compatible
  Usage: required
  Value type: <string>
  Definition: Should be "qcom,cam-icp".

- compat-hw-name
  Usage: required
  Value type: <string>
  Definition: Should be "qcom,a5" or "qcom,ipe0" or "qcom,ipe1" or "qcom,bps".

- num-a5
  Usage: required
  Value type: <u32>
  Definition: Number of supported A5 processors.

- num-ipe
  Usage: required
  Value type: <u32>
  Definition: Number of supported IPE HW blocks.

- num-bps
  Usage: required
  Value type: <u32>
  Definition: Number of supported BPS HW blocks.

Example:
	qcom,cam-icp {
		compatible = "qcom,cam-icp";
		compat-hw-name = "qcom,a5", "qcom,ipe0", "qcom,ipe1", "qcom,bps";
		num-a5 = <1>;
		num-ipe = <2>;
		num-bps = <1>;
		status = "ok";
	};

=======================
Required Node Structure
=======================
A5/IPE/BPS Node's provides interface for Image Control Processor driver
about the A5 register map, interrupt map, clocks, regulators
and name of firmware image.

- cell-index
  Usage: required
  Value type: <u32>
  Definition: Node instance number.

- compatible
  Usage: required
  Value type: <string>
  Definition: Should be "qcom,cam-a5" or "qcom,cam-ipe" or "qcom,cam-bps".

- reg-names
  Usage: optional
  Value type: <string>
  Definition: Name of the register resources.

- reg
  Usage: optional
  Value type: <u32>
  Definition: Register values.

- reg-cam-base
  Usage: optional
  Value type: <u32>
  Definition: Register values.

- interrupt-names
  Usage: optional
  Value type: <string>
  Definition: Name of the interrupt.

- interrupts
  Usage: optional
  Value type: <u32>
  Definition: Interrupt associated with CDM HW.

- regulator-names
  Usage: required
  Value type: <string>
  Definition: Name of the regulator resources for CDM HW.

- camss-supply
  Usage: required
  Value type: <phandle>
  Definition: Regulator reference corresponding to the names listed
              in "regulator-names".

- clock-names
  Usage: required
  Value type: <string>
  Definition: List of clock names required for CDM HW.

- src-clock-name
  Usage: required
  Value type: <string>
  Definition: Source clock name.

- clocks
  Usage: required
  Value type: <phandle>
  Definition: List of clocks used for CDM HW.

- clock-cntl-level
  Usage: required
  Value type: <string>
  Definition: List of strings corresponds clock-rates levels.
  Supported strings: lowsvs, svs, svs_l1, nominal, turbo.

- clock-rates
  Usage: required
  Value type: <u32>
  Definition: List of clocks rates.

- fw_name
  Usage: optional
  Value type: <string>
  Definition: Name of firmware image.

Examples:
a5: qcom,a5@ac00000 {
	cell-index = <0>;
	compatible = "qcom,cam-a5";
	reg = <0xac00000 0x6000>,
		<0xac10000 0x8000>,
		<0xac18000 0x3000>;
	reg-names = "a5_qgic", "a5_sierra", "a5_csr";
	interrupts = <0 463 0>;
	interrupt-names = "a5";
	regulator-names = "camss-vdd";
	camss-vdd-supply = <&titan_top_gdsc>;
	clock-names = "gcc_cam_ahb_clk",
		"gcc_cam_axi_clk",
		"soc_ahb_clk",
		"cpas_ahb_clk",
		"camnoc_axi_clk",
		"icp_apb_clk",
		"icp_atb_clk",
		"icp_clk",
		"icp_clk_src",
		"icp_cti_clk",
		"icp_ts_clk";
	clocks = <&clock_gcc GCC_CAMERA_AHB_CLK>,
			<&clock_gcc GCC_CAMERA_AXI_CLK>,
			<&clock_camcc CAM_CC_SOC_AHB_CLK>,
			<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
			<&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
			<&clock_camcc CAM_CC_ICP_APB_CLK>,
			<&clock_camcc CAM_CC_ICP_ATB_CLK>,
			<&clock_camcc CAM_CC_ICP_CLK>,
			<&clock_camcc CAM_CC_ICP_CLK_SRC>,
			<&clock_camcc CAM_CC_ICP_CTI_CLK>,
			<&clock_camcc CAM_CC_ICP_TS_CLK>;

	clock-rates = <0 0 0 80000000 0 0 0 0 600000000 0 0>;
	clock-cntl-level = "turbo";
	fw_name = "CAMERA_ICP.elf";
};

qcom,ipe0 {
	cell-index = <0>;
	compatible = "qcom,cam-ipe";
	regulator-names = "ipe0-vdd";
	ipe0-vdd-supply = <&ipe_0_gdsc>;
	clock-names = "ipe_0_ahb_clk",
		"ipe_0_areg_clk",
		"ipe_0_axi_clk",
		"ipe_0_clk",
		"ipe_0_clk_src";
	src-clock-name = "ipe_0_clk_src";
	clocks = <&clock_camcc CAM_CC_IPE_0_AHB_CLK>,
			<&clock_camcc CAM_CC_IPE_0_AREG_CLK>,
			<&clock_camcc CAM_CC_IPE_0_AXI_CLK>,
			<&clock_camcc CAM_CC_IPE_0_CLK>,
			<&clock_camcc CAM_CC_IPE_0_CLK_SRC>;

	clock-rates = <0 0 0 0 240000000>,
		<0 0 0 0 404000000>,
		<0 0 0 0 480000000>,
		<0 0 0 0 538000000>,
		<0 0 0 0 600000000>;
	clock-cntl-level = "lowsvs", "svs",
		"svs_l1", "nominal", "turbo";
};

qcom,ipe1 {
	cell-index = <1>;
	compatible = "qcom,cam-ipe";
	regulator-names = "ipe1-vdd";
	ipe1-vdd-supply = <&ipe_1_gdsc>;
	clock-names = "ipe_1_ahb_clk",
		"ipe_1_areg_clk",
		"ipe_1_axi_clk",
		"ipe_1_clk",
		"ipe_1_clk_src";
	src-clock-name = "ipe_1_clk_src";
	clocks = <&clock_camcc CAM_CC_IPE_1_AHB_CLK>,
			<&clock_camcc CAM_CC_IPE_1_AREG_CLK>,
			<&clock_camcc CAM_CC_IPE_1_AXI_CLK>,
			<&clock_camcc CAM_CC_IPE_1_CLK>,
			<&clock_camcc CAM_CC_IPE_1_CLK_SRC>;

	clock-rates = <0 0 0 0 240000000>,
		<0 0 0 0 404000000>,
		<0 0 0 0 480000000>,
		<0 0 0 0 538000000>,
		<0 0 0 0 600000000>;
	clock-cntl-level = "lowsvs", "svs",
		"svs_l1", "nominal", "turbo";
};

bps: qcom,bps {
	cell-index = <0>;
	compatible = "qcom,cam-bps";
	regulator-names = "bps-vdd";
	bps-vdd-supply = <&bps_gdsc>;
	clock-names = "bps_ahb_clk",
		"bps_areg_clk",
		"bps_axi_clk",
		"bps_clk",
		"bps_clk_src";
	src-clock-name = "bps_clk_src";
	clocks = <&clock_camcc CAM_CC_BPS_AHB_CLK>,
			<&clock_camcc CAM_CC_BPS_AREG_CLK>,
			<&clock_camcc CAM_CC_BPS_AXI_CLK>,
			<&clock_camcc CAM_CC_BPS_CLK>,
			<&clock_camcc CAM_CC_BPS_CLK_SRC>;

	clock-rates = <0 0 0 0 200000000>,
		<0 0 0 0 404000000>,
		<0 0 0 0 480000000>,
		<0 0 0 0 600000000>,
		<0 0 0 0 600000000>;
	clock-cntl-level = "lowsvs", "svs",
		"svs_l1", "nominal", "turbo";
};