sdhci: support JMicron JMB38x chips
The JMicron JMB38x chip doesn't support transfers that aren't 32-bit
aligned (both size and start address). It also doesn't like switching
between PIO and DMA mode, so it needs to be reset after each request.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a5300f2..785bbdc 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -7,6 +7,10 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
+ *
+ * Thanks to the following companies for their support:
+ *
+ * - JMicron (hardware and technical support)
*/
#include <linux/delay.h>
@@ -47,6 +51,8 @@
#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6)
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7)
+/* Controller needs to be reset after each request to stay stable */
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8)
static const struct pci_device_id pci_ids[] __devinitdata = {
{
@@ -111,6 +117,16 @@
SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
},
+ {
+ .vendor = PCI_VENDOR_ID_JMICRON,
+ .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_32BIT_DMA_SIZE |
+ SDHCI_QUIRK_RESET_AFTER_REQUEST,
+ },
+
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
@@ -922,7 +938,8 @@
*/
if (mrq->cmd->error ||
(mrq->data && (mrq->data->error ||
- (mrq->data->stop && mrq->data->stop->error)))) {
+ (mrq->data->stop && mrq->data->stop->error))) ||
+ (host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) {
/* Some controllers need this kick or reset won't work here */
if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {