diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 60924ce..a2f4438 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -61,17 +61,17 @@
 
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
 		devctl &= ~MUSB_DEVCTL_SESSION;
 		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl & MUSB_DEVCTL_BDEVICE) {
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 			MUSB_DEV_MODE(musb);
 		} else {
-			musb->xceiv.state = OTG_STATE_A_IDLE;
+			musb->xceiv->state = OTG_STATE_A_IDLE;
 			MUSB_HST_MODE(musb);
 		}
 		break;
@@ -89,7 +89,7 @@
 			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
 			usb_hcd_poll_rh_status(musb_to_hcd(musb));
 			/* NOTE: it might really be A_WAIT_BCON ... */
-			musb->xceiv.state = OTG_STATE_A_HOST;
+			musb->xceiv->state = OTG_STATE_A_HOST;
 		}
 		break;
 #endif
@@ -97,9 +97,9 @@
 	case OTG_STATE_A_HOST:
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl &  MUSB_DEVCTL_BDEVICE)
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 		else
-			musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 #endif
 	default:
 		break;
@@ -118,7 +118,7 @@
 
 	/* Never idle if active, or when VBUS timeout is not set as host */
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
-			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
@@ -163,8 +163,8 @@
 
 	if (is_on) {
 		musb->is_active = 1;
-		musb->xceiv.default_a = 1;
-		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb->xceiv->default_a = 1;
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 		devctl |= MUSB_DEVCTL_SESSION;
 
 		MUSB_HST_MODE(musb);
@@ -175,8 +175,8 @@
 		 * jumping right to B_IDLE...
 		 */
 
-		musb->xceiv.default_a = 0;
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->default_a = 0;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		devctl &= ~MUSB_DEVCTL_SESSION;
 
 		MUSB_DEV_MODE(musb);
@@ -188,10 +188,6 @@
 		otg_state_string(musb),
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
-static int omap_set_power(struct otg_transceiver *x, unsigned mA)
-{
-	return 0;
-}
 
 static int musb_platform_resume(struct musb *musb);
 
@@ -202,24 +198,6 @@
 	devctl |= MUSB_DEVCTL_SESSION;
 	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
-	switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	case MUSB_HOST:
-		otg_set_host(&musb->xceiv, musb->xceiv.host);
-		break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-	case MUSB_PERIPHERAL:
-		otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
-		break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
-	case MUSB_OTG:
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
 	return 0;
 }
 
@@ -231,6 +209,16 @@
 	omap_cfg_reg(AE5_2430_USB0HS_STP);
 #endif
 
+	/* We require some kind of external transceiver, hooked
+	 * up through ULPI.  TWL4030-family PMICs include one,
+	 * which needs a driver, drivers aren't always needed.
+	 */
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv) {
+		pr_err("HS USB OTG: no transceiver configured\n");
+		return -ENODEV;
+	}
+
 	musb_platform_resume(musb);
 
 	l = omap_readl(OTG_SYSCONFIG);
@@ -257,8 +245,6 @@
 
 	if (is_host_enabled(musb))
 		musb->board_set_vbus = omap_set_vbus;
-	if (is_peripheral_enabled(musb))
-		musb->xceiv.set_power = omap_set_power;
 	musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
@@ -282,8 +268,7 @@
 	l |= ENABLEWAKEUP;	/* enable wakeup */
 	omap_writel(l, OTG_SYSCONFIG);
 
-	if (musb->xceiv.set_suspend)
-		musb->xceiv.set_suspend(&musb->xceiv, 1);
+	otg_set_suspend(musb->xceiv, 1);
 
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 0);
@@ -300,8 +285,7 @@
 	if (!musb->clock)
 		return 0;
 
-	if (musb->xceiv.set_suspend)
-		musb->xceiv.set_suspend(&musb->xceiv, 0);
+	otg_set_suspend(musb->xceiv, 0);
 
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 1);