diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index b66e8544..70073b1 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -10,6 +10,7 @@
 config USB_MUSB_HDRC
 	depends on (USB || USB_GADGET) && HAVE_CLK
 	depends on !SUPERH
+	select NOP_USB_XCEIV if ARCH_DAVINCI
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select USB_OTG_UTILS
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
@@ -55,6 +56,7 @@
 config USB_TUSB6010
 	boolean "TUSB 6010 support"
 	depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+	select NOP_USB_XCEIV
 	default y
 	help
 	  The TUSB 6010 chip, from Texas Instruments, connects a discrete
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 7861348..f2f66eb 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -143,7 +143,7 @@
 	u16 val;
 
 	spin_lock_irqsave(&musb->lock, flags);
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_IDLE:
 	case OTG_STATE_A_WAIT_BCON:
 		/* Start a new session */
@@ -154,7 +154,7 @@
 		val = musb_readw(musb->mregs, MUSB_DEVCTL);
 		if (!(val & MUSB_DEVCTL_BDEVICE)) {
 			gpio_set_value(musb->config->gpio_vrsel, 1);
-			musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 		} else {
 			gpio_set_value(musb->config->gpio_vrsel, 0);
 
@@ -247,6 +247,11 @@
 	}
 	gpio_direction_output(musb->config->gpio_vrsel, 0);
 
+	usb_nop_xceiv_register();
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv)
+		return -ENODEV;
+
 	if (ANOMALY_05000346) {
 		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
 		SSYNC();
@@ -291,7 +296,7 @@
 			musb_conn_timer_handler, (unsigned long) musb);
 	}
 	if (is_peripheral_enabled(musb))
-		musb->xceiv.set_power = bfin_set_power;
+		musb->xceiv->set_power = bfin_set_power;
 
 	musb->isr = blackfin_interrupt;
 
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 6e14e06..180d7da 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -215,7 +215,7 @@
 	DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
 
 	spin_lock_irqsave(&musb->lock, flags);
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_VFALL:
 		/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
 		 * seems to mis-handle session "start" otherwise (or in our
@@ -226,7 +226,7 @@
 			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 			break;
 		}
-		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
 			MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
 		break;
@@ -251,7 +251,7 @@
 		if (devctl & MUSB_DEVCTL_BDEVICE)
 			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 		else
-			musb->xceiv.state = OTG_STATE_A_IDLE;
+			musb->xceiv->state = OTG_STATE_A_IDLE;
 		break;
 	default:
 		break;
@@ -325,21 +325,21 @@
 			 * to stop registering in devctl.
 			 */
 			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
-			musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (is_host_enabled(musb) && drvvbus) {
 			musb->is_active = 1;
 			MUSB_HST_MODE(musb);
-			musb->xceiv.default_a = 1;
-			musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+			musb->xceiv->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
 			del_timer(&otg_workaround);
 		} else {
 			musb->is_active = 0;
 			MUSB_DEV_MODE(musb);
-			musb->xceiv.default_a = 0;
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->default_a = 0;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
 		}
 
@@ -361,7 +361,7 @@
 
 	/* poll for ID change */
 	if (is_otg_enabled(musb)
-			&& musb->xceiv.state == OTG_STATE_B_IDLE)
+			&& musb->xceiv->state == OTG_STATE_B_IDLE)
 		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -380,6 +380,11 @@
 	void __iomem	*tibase = musb->ctrl_base;
 	u32		revision;
 
+	usb_nop_xceiv_register();
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv)
+		return -ENODEV;
+
 	musb->mregs += DAVINCI_BASE_OFFSET;
 
 	clk_enable(musb->clock);
@@ -387,7 +392,7 @@
 	/* returns zero if e.g. not clocked */
 	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
 	if (revision == 0)
-		return -ENODEV;
+		goto fail;
 
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
@@ -421,6 +426,10 @@
 
 	musb->isr = davinci_interrupt;
 	return 0;
+
+fail:
+	usb_nop_xceiv_unregister();
+	return -ENODEV;
 }
 
 int musb_platform_exit(struct musb *musb)
@@ -431,7 +440,7 @@
 	davinci_source_power(musb, 0 /*off*/, 1);
 
 	/* delay, to avoid problems with module reload */
-	if (is_host_enabled(musb) && musb->xceiv.default_a) {
+	if (is_host_enabled(musb) && musb->xceiv->default_a) {
 		int	maxdelay = 30;
 		u8	devctl, warn = 0;
 
@@ -460,5 +469,7 @@
 
 	clk_disable(musb->clock);
 
+	usb_nop_xceiv_unregister();
+
 	return 0;
 }
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 324459b..2460c39 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -267,7 +267,7 @@
 
 const char *otg_state_string(struct musb *musb)
 {
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_IDLE:		return "a_idle";
 	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
 	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
@@ -302,11 +302,11 @@
 	unsigned long	flags;
 
 	spin_lock_irqsave(&musb->lock, flags);
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_B_WAIT_ACON:
 		DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
 		musb_g_disconnect(musb);
-		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		musb->is_active = 0;
 		break;
 	case OTG_STATE_A_WAIT_BCON:
@@ -331,20 +331,20 @@
 	void __iomem	*mbase = musb->mregs;
 	u8	reg;
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_PERIPHERAL:
 	case OTG_STATE_A_WAIT_VFALL:
 	case OTG_STATE_A_WAIT_BCON:
 		DBG(1, "HNP: Switching back to A-host\n");
 		musb_g_disconnect(musb);
-		musb->xceiv.state = OTG_STATE_A_IDLE;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
 		MUSB_HST_MODE(musb);
 		musb->is_active = 0;
 		break;
 	case OTG_STATE_B_HOST:
 		DBG(1, "HNP: Disabling HR\n");
 		hcd->self.is_b_host = 0;
-		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		MUSB_DEV_MODE(musb);
 		reg = musb_readb(mbase, MUSB_POWER);
 		reg |= MUSB_POWER_SUSPENDM;
@@ -402,7 +402,7 @@
 
 		if (devctl & MUSB_DEVCTL_HM) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 			case OTG_STATE_A_SUSPEND:
 				/* remote wakeup?  later, GetPortStatus
 				 * will stop RESUME signaling
@@ -425,12 +425,12 @@
 				musb->rh_timer = jiffies
 						+ msecs_to_jiffies(20);
 
-				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->xceiv->state = OTG_STATE_A_HOST;
 				musb->is_active = 1;
 				usb_hcd_resume_root_hub(musb_to_hcd(musb));
 				break;
 			case OTG_STATE_B_WAIT_ACON:
-				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				musb->is_active = 1;
 				MUSB_DEV_MODE(musb);
 				break;
@@ -441,11 +441,11 @@
 			}
 #endif
 		} else {
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 			case OTG_STATE_A_SUSPEND:
 				/* possibly DISCONNECT is upcoming */
-				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->xceiv->state = OTG_STATE_A_HOST;
 				usb_hcd_resume_root_hub(musb_to_hcd(musb));
 				break;
 #endif
@@ -490,7 +490,7 @@
 		 */
 		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
 		musb->ep0_stage = MUSB_EP0_START;
-		musb->xceiv.state = OTG_STATE_A_IDLE;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
 		MUSB_HST_MODE(musb);
 		musb_set_vbus(musb, 1);
 
@@ -516,7 +516,7 @@
 		 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
 		 * make trouble here, keeping VBUS < 4.4V ?
 		 */
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 		case OTG_STATE_A_HOST:
 			/* recovery is dicey once we've gotten past the
 			 * initial stages of enumeration, but if VBUS
@@ -602,11 +602,11 @@
 		MUSB_HST_MODE(musb);
 
 		/* indicate new connection to OTG machine */
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 		case OTG_STATE_B_PERIPHERAL:
 			if (int_usb & MUSB_INTR_SUSPEND) {
 				DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
-				musb->xceiv.state = OTG_STATE_B_HOST;
+				musb->xceiv->state = OTG_STATE_B_HOST;
 				hcd->self.is_b_host = 1;
 				int_usb &= ~MUSB_INTR_SUSPEND;
 			} else
@@ -614,13 +614,13 @@
 			break;
 		case OTG_STATE_B_WAIT_ACON:
 			DBG(1, "HNP: Waiting to switch to b_host state\n");
-			musb->xceiv.state = OTG_STATE_B_HOST;
+			musb->xceiv->state = OTG_STATE_B_HOST;
 			hcd->self.is_b_host = 1;
 			break;
 		default:
 			if ((devctl & MUSB_DEVCTL_VBUS)
 					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
-				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->xceiv->state = OTG_STATE_A_HOST;
 				hcd->self.is_b_host = 0;
 			}
 			break;
@@ -650,7 +650,7 @@
 			}
 		} else if (is_peripheral_capable()) {
 			DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 #ifdef CONFIG_USB_OTG
 			case OTG_STATE_A_SUSPEND:
 				/* We need to ignore disconnect on suspend
@@ -673,12 +673,12 @@
 			case OTG_STATE_B_WAIT_ACON:
 				DBG(1, "HNP: RESET (%s), to b_peripheral\n",
 					otg_state_string(musb));
-				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				musb_g_reset(musb);
 				break;
 #endif
 			case OTG_STATE_B_IDLE:
-				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				/* FALLTHROUGH */
 			case OTG_STATE_B_PERIPHERAL:
 				musb_g_reset(musb);
@@ -763,7 +763,7 @@
 				MUSB_MODE(musb), devctl);
 		handled = IRQ_HANDLED;
 
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 		case OTG_STATE_A_HOST:
 		case OTG_STATE_A_SUSPEND:
@@ -805,7 +805,7 @@
 				otg_state_string(musb), devctl, power);
 		handled = IRQ_HANDLED;
 
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 #ifdef	CONFIG_USB_MUSB_OTG
 		case OTG_STATE_A_PERIPHERAL:
 			/*
@@ -817,10 +817,10 @@
 		case OTG_STATE_B_PERIPHERAL:
 			musb_g_suspend(musb);
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.gadget->b_hnp_enable;
+					&& musb->xceiv->gadget->b_hnp_enable;
 			if (musb->is_active) {
 #ifdef	CONFIG_USB_MUSB_OTG
-				musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 				DBG(1, "HNP: Setting timer for b_ase0_brst\n");
 				musb_otg_timer.data = (unsigned long)musb;
 				mod_timer(&musb_otg_timer, jiffies
@@ -834,9 +834,9 @@
 					+ msecs_to_jiffies(musb->a_wait_bcon));
 			break;
 		case OTG_STATE_A_HOST:
-			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->xceiv->state = OTG_STATE_A_SUSPEND;
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.host->b_hnp_enable;
+					&& musb->xceiv->host->b_hnp_enable;
 			break;
 		case OTG_STATE_B_HOST:
 			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -1682,7 +1682,7 @@
 
 	spin_lock_irqsave(&musb->lock, flags);
 	musb->a_wait_bcon = val;
-	if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+	if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
 		musb->is_active = 0;
 	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -1743,8 +1743,8 @@
 	struct musb *musb = container_of(data, struct musb, irq_work);
 	static int old_state;
 
-	if (musb->xceiv.state != old_state) {
-		old_state = musb->xceiv.state;
+	if (musb->xceiv->state != old_state) {
+		old_state = musb->xceiv->state;
 		sysfs_notify(&musb->controller->kobj, NULL, "mode");
 	}
 }
@@ -1841,7 +1841,7 @@
 	}
 
 #ifdef CONFIG_USB_MUSB_OTG
-	put_device(musb->xceiv.dev);
+	put_device(musb->xceiv->dev);
 #endif
 
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
@@ -1922,10 +1922,18 @@
 		}
 	}
 
-	/* assume vbus is off */
-
-	/* platform adjusts musb->mregs and musb->isr if needed,
-	 * and activates clocks
+	/* The musb_platform_init() call:
+	 *   - adjusts musb->mregs and musb->isr if needed,
+	 *   - may initialize an integrated tranceiver
+	 *   - initializes musb->xceiv, usually by otg_get_transceiver()
+	 *   - activates clocks.
+	 *   - stops powering VBUS
+	 *   - assigns musb->board_set_vbus if host mode is enabled
+	 *
+	 * There are various transciever configurations.  Blackfin,
+	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
+	 * external/discrete ones in various flavors (twl4030 family,
+	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
 	 */
 	musb->isr = generic_interrupt;
 	status = musb_platform_init(musb);
@@ -1993,17 +2001,17 @@
 				? "DMA" : "PIO",
 			musb->nIrq);
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	/* host side needs more setup, except for no-host modes */
-	if (musb->board_mode != MUSB_PERIPHERAL) {
+	/* host side needs more setup */
+	if (is_host_enabled(musb)) {
 		struct usb_hcd	*hcd = musb_to_hcd(musb);
 
-		if (musb->board_mode == MUSB_OTG)
+		otg_set_host(musb->xceiv, &hcd->self);
+
+		if (is_otg_enabled(musb))
 			hcd->self.otg_port = 1;
-		musb->xceiv.host = &hcd->self;
+		musb->xceiv->host = &hcd->self;
 		hcd->power_budget = 2 * (plat->power ? : 250);
 	}
-#endif				/* CONFIG_USB_MUSB_HDRC_HCD */
 
 	/* For the host-only role, we can activate right away.
 	 * (We expect the ID pin to be forcibly grounded!!)
@@ -2011,8 +2019,8 @@
 	 */
 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
 		MUSB_HST_MODE(musb);
-		musb->xceiv.default_a = 1;
-		musb->xceiv.state = OTG_STATE_A_IDLE;
+		musb->xceiv->default_a = 1;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
 
 		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
 		if (status)
@@ -2027,8 +2035,8 @@
 
 	} else /* peripheral is enabled */ {
 		MUSB_DEV_MODE(musb);
-		musb->xceiv.default_a = 0;
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->default_a = 0;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 
 		status = musb_gadget_setup(musb);
 		if (status)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index c2a776e..2b49c98 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -356,7 +356,7 @@
 	u16			int_rx;
 	u16			int_tx;
 
-	struct otg_transceiver	xceiv;
+	struct otg_transceiver	*xceiv;
 
 	int nIrq;
 	unsigned		irq_wake:1;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index bc197b28..8dfad11 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1406,7 +1406,7 @@
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_B_PERIPHERAL:
 		/* NOTE:  OTG state machine doesn't include B_SUSPENDED;
 		 * that's part of the standard usb 1.1 state machine, and
@@ -1508,9 +1508,9 @@
 {
 	struct musb	*musb = gadget_to_musb(gadget);
 
-	if (!musb->xceiv.set_power)
+	if (!musb->xceiv->set_power)
 		return -EOPNOTSUPP;
-	return otg_set_power(&musb->xceiv, mA);
+	return otg_set_power(musb->xceiv, mA);
 }
 
 static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
@@ -1733,11 +1733,7 @@
 
 		spin_lock_irqsave(&musb->lock, flags);
 
-		/* REVISIT always use otg_set_peripheral(), handling
-		 * issues including the root hub one below ...
-		 */
-		musb->xceiv.gadget = &musb->g;
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		otg_set_peripheral(musb->xceiv, &musb->g);
 		musb->is_active = 1;
 
 		/* FIXME this ignores the softconnect flag.  Drivers are
@@ -1749,6 +1745,8 @@
 		if (!is_otg_enabled(musb))
 			musb_start(musb);
 
+		otg_set_peripheral(musb->xceiv, &musb->g);
+
 		spin_unlock_irqrestore(&musb->lock, flags);
 
 		if (is_otg_enabled(musb)) {
@@ -1762,8 +1760,7 @@
 			if (retval < 0) {
 				DBG(1, "add_hcd failed, %d\n", retval);
 				spin_lock_irqsave(&musb->lock, flags);
-				musb->xceiv.gadget = NULL;
-				musb->xceiv.state = OTG_STATE_UNDEFINED;
+				otg_set_peripheral(musb->xceiv, NULL);
 				musb->gadget_driver = NULL;
 				musb->g.dev.driver = NULL;
 				spin_unlock_irqrestore(&musb->lock, flags);
@@ -1846,8 +1843,9 @@
 
 		(void) musb_gadget_vbus_draw(&musb->g, 0);
 
-		musb->xceiv.state = OTG_STATE_UNDEFINED;
+		musb->xceiv->state = OTG_STATE_UNDEFINED;
 		stop_activity(musb, driver);
+		otg_set_peripheral(musb->xceiv, NULL);
 
 		DBG(3, "unregistering driver %s\n", driver->function);
 		spin_unlock_irqrestore(&musb->lock, flags);
@@ -1883,7 +1881,7 @@
 void musb_g_resume(struct musb *musb)
 {
 	musb->is_suspended = 0;
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_B_IDLE:
 		break;
 	case OTG_STATE_B_WAIT_ACON:
@@ -1909,10 +1907,10 @@
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 	DBG(3, "devctl %02x\n", devctl);
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_B_IDLE:
 		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
-			musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		break;
 	case OTG_STATE_B_PERIPHERAL:
 		musb->is_suspended = 1;
@@ -1958,22 +1956,22 @@
 		spin_lock(&musb->lock);
 	}
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	default:
 #ifdef	CONFIG_USB_MUSB_OTG
 		DBG(2, "Unhandled disconnect %s, setting a_idle\n",
 			otg_state_string(musb));
-		musb->xceiv.state = OTG_STATE_A_IDLE;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
 		break;
 	case OTG_STATE_A_PERIPHERAL:
-		musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 		break;
 	case OTG_STATE_B_WAIT_ACON:
 	case OTG_STATE_B_HOST:
 #endif
 	case OTG_STATE_B_PERIPHERAL:
 	case OTG_STATE_B_IDLE:
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		break;
 	case OTG_STATE_B_SRP_INIT:
 		break;
@@ -2029,10 +2027,10 @@
 	 * or else after HNP, as A-Device
 	 */
 	if (devctl & MUSB_DEVCTL_BDEVICE) {
-		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		musb->g.is_a_peripheral = 0;
 	} else if (is_otg_enabled(musb)) {
-		musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+		musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
 		musb->g.is_a_peripheral = 1;
 	} else
 		WARN_ON(1);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index c1bb192..0d1f153 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2213,7 +2213,7 @@
 {
 	struct musb	*musb = hcd_to_musb(hcd);
 
-	if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+	if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
 		return 0;
 
 	if (is_host_active(musb) && musb->is_active) {
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index bf677ac..d7e1bc4 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -78,18 +78,18 @@
 		DBG(3, "Root port suspended, power %02x\n", power);
 
 		musb->port1_status |= USB_PORT_STAT_SUSPEND;
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 		case OTG_STATE_A_HOST:
-			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->xceiv->state = OTG_STATE_A_SUSPEND;
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.host->b_hnp_enable;
+					&& musb->xceiv->host->b_hnp_enable;
 			musb_platform_try_idle(musb, 0);
 			break;
 #ifdef	CONFIG_USB_MUSB_OTG
 		case OTG_STATE_B_HOST:
-			musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+			musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.host->b_hnp_enable;
+					&& musb->xceiv->host->b_hnp_enable;
 			musb_platform_try_idle(musb, 0);
 			break;
 #endif
@@ -116,7 +116,7 @@
 	void __iomem	*mbase = musb->mregs;
 
 #ifdef CONFIG_USB_MUSB_OTG
-	if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+	if (musb->xceiv->state == OTG_STATE_B_IDLE) {
 		DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
 		musb->port1_status &= ~USB_PORT_STAT_RESET;
 		return;
@@ -186,14 +186,14 @@
 	usb_hcd_poll_rh_status(musb_to_hcd(musb));
 	musb->is_active = 0;
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_HOST:
 	case OTG_STATE_A_SUSPEND:
-		musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+		musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 		musb->is_active = 0;
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		break;
 	default:
 		DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
@@ -332,7 +332,7 @@
 			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
 			usb_hcd_poll_rh_status(musb_to_hcd(musb));
 			/* NOTE: it might really be A_WAIT_BCON ... */
-			musb->xceiv.state = OTG_STATE_A_HOST;
+			musb->xceiv->state = OTG_STATE_A_HOST;
 		}
 
 		put_unaligned(cpu_to_le32(musb->port1_status
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 60924ce..a2f4438 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -61,17 +61,17 @@
 
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
 		devctl &= ~MUSB_DEVCTL_SESSION;
 		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl & MUSB_DEVCTL_BDEVICE) {
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 			MUSB_DEV_MODE(musb);
 		} else {
-			musb->xceiv.state = OTG_STATE_A_IDLE;
+			musb->xceiv->state = OTG_STATE_A_IDLE;
 			MUSB_HST_MODE(musb);
 		}
 		break;
@@ -89,7 +89,7 @@
 			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
 			usb_hcd_poll_rh_status(musb_to_hcd(musb));
 			/* NOTE: it might really be A_WAIT_BCON ... */
-			musb->xceiv.state = OTG_STATE_A_HOST;
+			musb->xceiv->state = OTG_STATE_A_HOST;
 		}
 		break;
 #endif
@@ -97,9 +97,9 @@
 	case OTG_STATE_A_HOST:
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl &  MUSB_DEVCTL_BDEVICE)
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 		else
-			musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 #endif
 	default:
 		break;
@@ -118,7 +118,7 @@
 
 	/* Never idle if active, or when VBUS timeout is not set as host */
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
-			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
@@ -163,8 +163,8 @@
 
 	if (is_on) {
 		musb->is_active = 1;
-		musb->xceiv.default_a = 1;
-		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb->xceiv->default_a = 1;
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 		devctl |= MUSB_DEVCTL_SESSION;
 
 		MUSB_HST_MODE(musb);
@@ -175,8 +175,8 @@
 		 * jumping right to B_IDLE...
 		 */
 
-		musb->xceiv.default_a = 0;
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->default_a = 0;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		devctl &= ~MUSB_DEVCTL_SESSION;
 
 		MUSB_DEV_MODE(musb);
@@ -188,10 +188,6 @@
 		otg_state_string(musb),
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
-static int omap_set_power(struct otg_transceiver *x, unsigned mA)
-{
-	return 0;
-}
 
 static int musb_platform_resume(struct musb *musb);
 
@@ -202,24 +198,6 @@
 	devctl |= MUSB_DEVCTL_SESSION;
 	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
-	switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	case MUSB_HOST:
-		otg_set_host(&musb->xceiv, musb->xceiv.host);
-		break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-	case MUSB_PERIPHERAL:
-		otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
-		break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
-	case MUSB_OTG:
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
 	return 0;
 }
 
@@ -231,6 +209,16 @@
 	omap_cfg_reg(AE5_2430_USB0HS_STP);
 #endif
 
+	/* We require some kind of external transceiver, hooked
+	 * up through ULPI.  TWL4030-family PMICs include one,
+	 * which needs a driver, drivers aren't always needed.
+	 */
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv) {
+		pr_err("HS USB OTG: no transceiver configured\n");
+		return -ENODEV;
+	}
+
 	musb_platform_resume(musb);
 
 	l = omap_readl(OTG_SYSCONFIG);
@@ -257,8 +245,6 @@
 
 	if (is_host_enabled(musb))
 		musb->board_set_vbus = omap_set_vbus;
-	if (is_peripheral_enabled(musb))
-		musb->xceiv.set_power = omap_set_power;
 	musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
@@ -282,8 +268,7 @@
 	l |= ENABLEWAKEUP;	/* enable wakeup */
 	omap_writel(l, OTG_SYSCONFIG);
 
-	if (musb->xceiv.set_suspend)
-		musb->xceiv.set_suspend(&musb->xceiv, 1);
+	otg_set_suspend(musb->xceiv, 1);
 
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 0);
@@ -300,8 +285,7 @@
 	if (!musb->clock)
 		return 0;
 
-	if (musb->xceiv.set_suspend)
-		musb->xceiv.set_suspend(&musb->xceiv, 0);
+	otg_set_suspend(musb->xceiv, 0);
 
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 1);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 4ac1477..88b587c 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -259,6 +259,8 @@
 		tusb_fifo_read_unaligned(fifo, buf, len);
 }
 
+static struct musb *the_musb;
+
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 
 /* This is used by gadget drivers, and OTG transceiver logic, allowing
@@ -269,7 +271,7 @@
  */
 static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
 {
-	struct musb	*musb = container_of(x, struct musb, xceiv);
+	struct musb	*musb = the_musb;
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		reg;
 
@@ -419,7 +421,7 @@
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
 		if ((musb->a_wait_bcon != 0)
 			&& (musb->idle_timeout == 0
@@ -483,7 +485,7 @@
 
 	/* Never idle if active, or when VBUS timeout is not set as host */
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
-			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
@@ -532,8 +534,8 @@
 		if (musb->set_clock)
 			musb->set_clock(musb->clock, 1);
 		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
-		musb->xceiv.default_a = 1;
-		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb->xceiv->default_a = 1;
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 		devctl |= MUSB_DEVCTL_SESSION;
 
 		conf |= TUSB_DEV_CONF_USB_HOST_MODE;
@@ -546,24 +548,24 @@
 		/* If ID pin is grounded, we want to be a_idle */
 		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
 		if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 			case OTG_STATE_A_WAIT_VRISE:
 			case OTG_STATE_A_WAIT_BCON:
-				musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+				musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 				break;
 			case OTG_STATE_A_WAIT_VFALL:
-				musb->xceiv.state = OTG_STATE_A_IDLE;
+				musb->xceiv->state = OTG_STATE_A_IDLE;
 				break;
 			default:
-				musb->xceiv.state = OTG_STATE_A_IDLE;
+				musb->xceiv->state = OTG_STATE_A_IDLE;
 			}
 			musb->is_active = 0;
-			musb->xceiv.default_a = 1;
+			musb->xceiv->default_a = 1;
 			MUSB_HST_MODE(musb);
 		} else {
 			musb->is_active = 0;
-			musb->xceiv.default_a = 0;
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->default_a = 0;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 			MUSB_DEV_MODE(musb);
 		}
 
@@ -674,7 +676,7 @@
 		else
 			default_a = is_host_enabled(musb);
 		DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
-		musb->xceiv.default_a = default_a;
+		musb->xceiv->default_a = default_a;
 		tusb_source_power(musb, default_a);
 
 		/* Don't allow idling immediately */
@@ -686,7 +688,7 @@
 	if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
 
 		/* B-dev state machine:  no vbus ~= disconnect */
-		if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+		if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
 				|| !is_host_enabled(musb)) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 			/* ? musb_root_disconnect(musb); */
@@ -701,9 +703,9 @@
 
 			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
 				DBG(1, "Forcing disconnect (no interrupt)\n");
-				if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+				if (musb->xceiv->state != OTG_STATE_B_IDLE) {
 					/* INTR_DISCONNECT can hide... */
-					musb->xceiv.state = OTG_STATE_B_IDLE;
+					musb->xceiv->state = OTG_STATE_B_IDLE;
 					musb->int_usb |= MUSB_INTR_DISCONNECT;
 				}
 				musb->is_active = 0;
@@ -717,7 +719,7 @@
 			DBG(2, "vbus change, %s, otg %03x\n",
 				otg_state_string(musb), otg_stat);
 
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 			case OTG_STATE_A_IDLE:
 				DBG(2, "Got SRP, turning on VBUS\n");
 				musb_set_vbus(musb, 1);
@@ -765,7 +767,7 @@
 
 		DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
 
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 		case OTG_STATE_A_WAIT_VRISE:
 			/* VBUS has probably been valid for a while now,
 			 * but may well have bounced out of range a bit
@@ -777,7 +779,7 @@
 					DBG(2, "devctl %02x\n", devctl);
 					break;
 				}
-				musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+				musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 				musb->is_active = 0;
 				idle_timeout = jiffies
 					+ msecs_to_jiffies(musb->a_wait_bcon);
@@ -1093,9 +1095,14 @@
 {
 	struct platform_device	*pdev;
 	struct resource		*mem;
-	void __iomem		*sync;
+	void __iomem		*sync = NULL;
 	int			ret;
 
+	usb_nop_xceiv_register();
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv)
+		return -ENODEV;
+
 	pdev = to_platform_device(musb->controller);
 
 	/* dma address for async dma */
@@ -1106,14 +1113,16 @@
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!mem) {
 		pr_debug("no sync dma resource?\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto done;
 	}
 	musb->sync = mem->start;
 
 	sync = ioremap(mem->start, mem->end - mem->start + 1);
 	if (!sync) {
 		pr_debug("ioremap for sync failed\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto done;
 	}
 	musb->sync_va = sync;
 
@@ -1126,28 +1135,37 @@
 	if (ret) {
 		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
 				ret);
-		return -ENODEV;
+		goto done;
 	}
 	musb->isr = tusb_interrupt;
 
 	if (is_host_enabled(musb))
 		musb->board_set_vbus = tusb_source_power;
-	if (is_peripheral_enabled(musb))
-		musb->xceiv.set_power = tusb_draw_power;
+	if (is_peripheral_enabled(musb)) {
+		musb->xceiv->set_power = tusb_draw_power;
+		the_musb = musb;
+	}
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
+done:
+	if (ret < 0) {
+		if (sync)
+			iounmap(sync);
+		usb_nop_xceiv_unregister();
+	}
 	return ret;
 }
 
 int musb_platform_exit(struct musb *musb)
 {
 	del_timer_sync(&musb_idle_timer);
+	the_musb = NULL;
 
 	if (musb->board_set_power)
 		musb->board_set_power(0);
 
 	iounmap(musb->sync_va);
-
+	usb_nop_xceiv_unregister();
 	return 0;
 }