Merge branch 'asm/dt' into next/dt
* asm/dt:
add Alphascale to vendor-prefixes.txt
ARM: add alphascale,acc.txt bindings documentation
ARM: dts: add DT for Alphascale ASM9260 SoC
diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
new file mode 100644
index 0000000..62e67e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
@@ -0,0 +1,115 @@
+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible of choising proper
+clock source, setting deviders and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM 0
+CLKID_AHB_RAM 1
+CLKID_AHB_GPIO 2
+CLKID_AHB_MAC 3
+CLKID_AHB_EMI 4
+CLKID_AHB_USB0 5
+CLKID_AHB_USB1 6
+CLKID_AHB_DMA0 7
+CLKID_AHB_DMA1 8
+CLKID_AHB_UART0 9
+CLKID_AHB_UART1 10
+CLKID_AHB_UART2 11
+CLKID_AHB_UART3 12
+CLKID_AHB_UART4 13
+CLKID_AHB_UART5 14
+CLKID_AHB_UART6 15
+CLKID_AHB_UART7 16
+CLKID_AHB_UART8 17
+CLKID_AHB_UART9 18
+CLKID_AHB_I2S0 19
+CLKID_AHB_I2C0 20
+CLKID_AHB_I2C1 21
+CLKID_AHB_SSP0 22
+CLKID_AHB_IOCONFIG 23
+CLKID_AHB_WDT 24
+CLKID_AHB_CAN0 25
+CLKID_AHB_CAN1 26
+CLKID_AHB_MPWM 27
+CLKID_AHB_SPI0 28
+CLKID_AHB_SPI1 29
+CLKID_AHB_QEI 30
+CLKID_AHB_QUADSPI0 31
+CLKID_AHB_CAMIF 32
+CLKID_AHB_LCDIF 33
+CLKID_AHB_TIMER0 34
+CLKID_AHB_TIMER1 35
+CLKID_AHB_TIMER2 36
+CLKID_AHB_TIMER3 37
+CLKID_AHB_IRQ 38
+CLKID_AHB_RTC 39
+CLKID_AHB_NAND 40
+CLKID_AHB_ADC0 41
+CLKID_AHB_LED 42
+CLKID_AHB_DAC0 43
+CLKID_AHB_LCD 44
+CLKID_AHB_I2S1 45
+CLKID_AHB_MAC1 46
+
+CLKID_SYS_CPU 47
+CLKID_SYS_AHB 48
+CLKID_SYS_I2S0M 49
+CLKID_SYS_I2S0S 50
+CLKID_SYS_I2S1M 51
+CLKID_SYS_I2S1S 52
+CLKID_SYS_UART0 53
+CLKID_SYS_UART1 54
+CLKID_SYS_UART2 55
+CLKID_SYS_UART3 56
+CLKID_SYS_UART4 56
+CLKID_SYS_UART5 57
+CLKID_SYS_UART6 58
+CLKID_SYS_UART7 59
+CLKID_SYS_UART8 60
+CLKID_SYS_UART9 61
+CLKID_SYS_SPI0 62
+CLKID_SYS_SPI1 63
+CLKID_SYS_QUADSPI 64
+CLKID_SYS_SSP0 65
+CLKID_SYS_NAND 66
+CLKID_SYS_TRACE 67
+CLKID_SYS_CAMM 68
+CLKID_SYS_WDT 69
+CLKID_SYS_CLKOUT 70
+CLKID_SYS_MAC 71
+CLKID_SYS_LCD 72
+CLKID_SYS_ADCANA 73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+ compatible = "alphascale,asm9260-uart";
+ reg = <0x80010000 0x4000>;
+ clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+ interrupts = <19>;
+ status = "disabled";
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+ compatible = "alphascale,asm9260-timer";
+ reg = <0x80088000 0x4000>;
+ clocks = <&acc CLKID_AHB_TIMER0>;
+ interrupts = <29>;
+};
+
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b1df0ad..76a4b3b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -11,6 +11,7 @@
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
allwinner Allwinner Technology Co., Ltd.
+alphascale AlphaScale Integrated Circuits Systems, Inc.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amd Advanced Micro Devices (AMD), Inc.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 311691b..f2fd0a2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -628,7 +628,7 @@
mt6592-evb.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
-
+dtb-$(CONFIG_MACH_ASM9260) += alphascale-asm9260-devkit.dtb
endif
always := $(dtb-y)
diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
new file mode 100644
index 0000000..c77e2c9
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "alphascale-asm9260.dtsi"
+
+/ {
+ model = "Alphascale asm9260 Development Kit";
+ compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
+};
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale-asm9260.dtsi
new file mode 100644
index 0000000..907fc7b
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale-asm9260.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+/ {
+ interrupt-parent = <&icoll>;
+
+ memory {
+ device_type = "memory";
+ reg = <0x20000000 0x2000000>;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ clocks = <&acc CLKID_SYS_CPU>;
+ };
+ };
+
+ osc24m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-accuracy = <30000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ acc: clock-controller@80040000 {
+ compatible = "alphascale,asm9260-clock-controller";
+ #clock-cells = <1>;
+ clocks = <&osc24m>;
+ reg = <0x80040000 0x204>;
+ };
+
+ icoll: interrupt-controller@80054000 {
+ compatible = "alphascale,asm9260-icoll";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x80054000 0x200>;
+ };
+
+ timer0: timer@80088000 {
+ compatible = "alphascale,asm9260-timer";
+ reg = <0x80088000 0x4000>;
+ clocks = <&acc CLKID_AHB_TIMER0>;
+ interrupts = <29>;
+ };
+ };
+};