usb: xhci: bInterval quirk for TI TUSB73x0
commit 69307ccb9ad7ccb653e332de68effdeaaab6907d upstream.
As per [1] issue #4,
"The periodic EP scheduler always tries to schedule the EPs
that have large intervals (interval equal to or greater than
128 microframes) into different microframes. So it maintains
an internal counter and increments for each large interval
EP added. When the counter is greater than 128, the scheduler
rejects the new EP. So when the hub re-enumerated 128 times,
it triggers this condition."
This results in Bandwidth error when devices with periodic
endpoints (ISO/INT) having bInterval > 7 are plugged and
unplugged several times on a TUSB73x0 XHCI host.
Workaround this issue by limiting the bInterval to 7
(i.e. interval to 6) for High-speed or faster periodic endpoints.
[1] - http://www.ti.com/lit/er/sllz076/sllz076.pdf
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 7064892..87848ce 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1494,6 +1494,17 @@
*/
max_esit_payload = xhci_get_max_esit_payload(udev, ep);
interval = xhci_get_endpoint_interval(udev, ep);
+
+ /* Periodic endpoint bInterval limit quirk */
+ if (usb_endpoint_xfer_int(&ep->desc) ||
+ usb_endpoint_xfer_isoc(&ep->desc)) {
+ if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) &&
+ udev->speed >= USB_SPEED_HIGH &&
+ interval >= 7) {
+ interval = 6;
+ }
+ }
+
mult = xhci_get_endpoint_mult(udev, ep);
max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
max_burst = xhci_get_endpoint_max_burst(udev, ep);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 954abfd..93f566c 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -199,6 +199,9 @@
pdev->device == 0x1042)
xhci->quirks |= XHCI_BROKEN_STREAMS;
+ if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
+ xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
+
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index f97b009..328fe06 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1659,6 +1659,7 @@
#define XHCI_MISSING_CAS (1 << 24)
/* For controller with a broken Port Disable implementation */
#define XHCI_BROKEN_PORT_PED (1 << 25)
+#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
unsigned int num_active_eps;
unsigned int limit_active_eps;