| # |
| # Watchdog device configuration |
| # |
| |
| menuconfig WATCHDOG |
| bool "Watchdog Timer Support" |
| ---help--- |
| If you say Y here (and to one of the following options) and create a |
| character special file /dev/watchdog with major number 10 and minor |
| number 130 using mknod ("man mknod"), you will get a watchdog, i.e.: |
| subsequently opening the file and then failing to write to it for |
| longer than 1 minute will result in rebooting the machine. This |
| could be useful for a networked machine that needs to come back |
| on-line as fast as possible after a lock-up. There's both a watchdog |
| implementation entirely in software (which can sometimes fail to |
| reboot the machine) and a driver for hardware watchdog boards, which |
| are more robust and can also keep track of the temperature inside |
| your computer. For details, read |
| <file:Documentation/watchdog/watchdog-api.txt> in the kernel source. |
| |
| The watchdog is usually used together with the watchdog daemon |
| which is available from |
| <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can |
| also monitor NFS connections and can reboot the machine when the process |
| table is full. |
| |
| If unsure, say N. |
| |
| if WATCHDOG |
| |
| config WATCHDOG_CORE |
| bool "WatchDog Timer Driver Core" |
| ---help--- |
| Say Y here if you want to use the new watchdog timer driver core. |
| This driver provides a framework for all watchdog timer drivers |
| and gives them the /dev/watchdog interface (and later also the |
| sysfs interface). |
| |
| config WATCHDOG_NOWAYOUT |
| bool "Disable watchdog shutdown on close" |
| help |
| The default watchdog behaviour (which you get if you say N here) is |
| to stop the timer if the process managing it closes the file |
| /dev/watchdog. It's always remotely possible that this process might |
| get killed. If you say Y here, the watchdog cannot be stopped once |
| it has been started. |
| |
| # |
| # General Watchdog drivers |
| # |
| |
| comment "Watchdog Device Drivers" |
| |
| # Architecture Independent |
| |
| config SOFT_WATCHDOG |
| tristate "Software watchdog" |
| help |
| A software monitoring watchdog. This will fail to reboot your system |
| from some situations that the hardware watchdog will recover |
| from. Equally it's a lot cheaper to install. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called softdog. |
| |
| config WM831X_WATCHDOG |
| tristate "WM831x watchdog" |
| depends on MFD_WM831X |
| select WATCHDOG_CORE |
| help |
| Support for the watchdog in the WM831x AudioPlus PMICs. When |
| the watchdog triggers the system will be reset. |
| |
| config WM8350_WATCHDOG |
| tristate "WM8350 watchdog" |
| depends on MFD_WM8350 |
| help |
| Support for the watchdog in the WM8350 AudioPlus PMIC. When |
| the watchdog triggers the system will be reset. |
| |
| # ALPHA Architecture |
| |
| # ARM Architecture |
| |
| config ARM_SP805_WATCHDOG |
| tristate "ARM SP805 Watchdog" |
| depends on ARM_AMBA |
| help |
| ARM Primecell SP805 Watchdog timer. This will reboot your system when |
| the timeout is reached. |
| |
| config AT91RM9200_WATCHDOG |
| tristate "AT91RM9200 watchdog" |
| depends on ARCH_AT91RM9200 |
| help |
| Watchdog timer embedded into AT91RM9200 chips. This will reboot your |
| system when the timeout is reached. |
| |
| config AT91SAM9X_WATCHDOG |
| tristate "AT91SAM9X / AT91CAP9 watchdog" |
| depends on ARCH_AT91 && !ARCH_AT91RM9200 |
| help |
| Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will |
| reboot your system when the timeout is reached. |
| |
| config 21285_WATCHDOG |
| tristate "DC21285 watchdog" |
| depends on FOOTBRIDGE |
| help |
| The Intel Footbridge chip contains a built-in watchdog circuit. Say Y |
| here if you wish to use this. Alternatively say M to compile the |
| driver as a module, which will be called wdt285. |
| |
| This driver does not work on all machines. In particular, early CATS |
| boards have hardware problems that will cause the machine to simply |
| lock up if the watchdog fires. |
| |
| "If in doubt, leave it out" - say N. |
| |
| config 977_WATCHDOG |
| tristate "NetWinder WB83C977 watchdog" |
| depends on FOOTBRIDGE && ARCH_NETWINDER |
| help |
| Say Y here to include support for the WB977 watchdog included in |
| NetWinder machines. Alternatively say M to compile the driver as |
| a module, which will be called wdt977. |
| |
| Not sure? It's safe to say N. |
| |
| config IXP2000_WATCHDOG |
| tristate "IXP2000 Watchdog" |
| depends on ARCH_IXP2000 |
| help |
| Say Y here if to include support for the watchdog timer |
| in the Intel IXP2000(2400, 2800, 2850) network processors. |
| This driver can be built as a module by choosing M. The module |
| will be called ixp2000_wdt. |
| |
| Say N if you are unsure. |
| |
| config IXP4XX_WATCHDOG |
| tristate "IXP4xx Watchdog" |
| depends on ARCH_IXP4XX |
| help |
| Say Y here if to include support for the watchdog timer |
| in the Intel IXP4xx network processors. This driver can |
| be built as a module by choosing M. The module will |
| be called ixp4xx_wdt. |
| |
| Note: The internal IXP4xx watchdog does a soft CPU reset |
| which doesn't reset any peripherals. There are circumstances |
| where the watchdog will fail to reset the board correctly |
| (e.g., if the boot ROM is in an unreadable state). |
| |
| Say N if you are unsure. |
| |
| config KS8695_WATCHDOG |
| tristate "KS8695 watchdog" |
| depends on ARCH_KS8695 |
| help |
| Watchdog timer embedded into KS8695 processor. This will reboot your |
| system when the timeout is reached. |
| |
| config HAVE_S3C2410_WATCHDOG |
| bool |
| help |
| This will include watchdog timer support for Samsung SoCs. If |
| you want to include watchdog support for any machine, kindly |
| select this in the respective mach-XXXX/Kconfig file. |
| |
| config S3C2410_WATCHDOG |
| tristate "S3C2410 Watchdog" |
| depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG |
| select WATCHDOG_CORE |
| help |
| Watchdog timer block in the Samsung SoCs. This will reboot |
| the system when the timer expires with the watchdog enabled. |
| |
| The driver is limited by the speed of the system's PCLK |
| signal, so with reasonably fast systems (PCLK around 50-66MHz) |
| then watchdog intervals of over approximately 20seconds are |
| unavailable. |
| |
| The driver can be built as a module by choosing M, and will |
| be called s3c2410_wdt |
| |
| config SA1100_WATCHDOG |
| tristate "SA1100/PXA2xx watchdog" |
| depends on ARCH_SA1100 || ARCH_PXA |
| help |
| Watchdog timer embedded into SA11x0 and PXA2xx chips. This will |
| reboot your system when timeout is reached. |
| |
| NOTE: once enabled, this timer cannot be disabled. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sa1100_wdt. |
| |
| config DW_WATCHDOG |
| tristate "Synopsys DesignWare watchdog" |
| depends on ARM && HAVE_CLK |
| help |
| Say Y here if to include support for the Synopsys DesignWare |
| watchdog timer found in many ARM chips. |
| To compile this driver as a module, choose M here: the |
| module will be called dw_wdt. |
| |
| config MPCORE_WATCHDOG |
| tristate "MPcore watchdog" |
| depends on HAVE_ARM_TWD |
| help |
| Watchdog timer embedded into the MPcore system. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mpcore_wdt. |
| |
| config EP93XX_WATCHDOG |
| tristate "EP93xx Watchdog" |
| depends on ARCH_EP93XX |
| help |
| Say Y here if to include support for the watchdog timer |
| embedded in the Cirrus Logic EP93xx family of devices. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ep93xx_wdt. |
| |
| config OMAP_WATCHDOG |
| tristate "OMAP Watchdog" |
| depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS |
| help |
| Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog. Say 'Y' |
| here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer. |
| |
| config PNX4008_WATCHDOG |
| tristate "PNX4008 and LPC32XX Watchdog" |
| depends on ARCH_PNX4008 || ARCH_LPC32XX |
| help |
| Say Y here if to include support for the watchdog timer |
| in the PNX4008 or LPC32XX processor. |
| This driver can be built as a module by choosing M. The module |
| will be called pnx4008_wdt. |
| |
| Say N if you are unsure. |
| |
| config IOP_WATCHDOG |
| tristate "IOP Watchdog" |
| depends on PLAT_IOP |
| select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X) |
| help |
| Say Y here if to include support for the watchdog timer |
| in the Intel IOP3XX & IOP13XX I/O Processors. This driver can |
| be built as a module by choosing M. The module will |
| be called iop_wdt. |
| |
| Note: The IOP13XX watchdog does an Internal Bus Reset which will |
| affect both cores and the peripherals of the IOP. The ATU-X |
| and/or ATUe configuration registers will remain intact, but if |
| operating as an Root Complex and/or Central Resource, the PCI-X |
| and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER. |
| |
| config DAVINCI_WATCHDOG |
| tristate "DaVinci watchdog" |
| depends on ARCH_DAVINCI |
| help |
| Say Y here if to include support for the watchdog timer |
| in the DaVinci DM644x/DM646x processors. |
| To compile this driver as a module, choose M here: the |
| module will be called davinci_wdt. |
| |
| NOTE: once enabled, this timer cannot be disabled. |
| Say N if you are unsure. |
| |
| config ORION_WATCHDOG |
| tristate "Orion watchdog" |
| depends on ARCH_ORION5X || ARCH_KIRKWOOD |
| help |
| Say Y here if to include support for the watchdog timer |
| in the Marvell Orion5x and Kirkwood ARM SoCs. |
| To compile this driver as a module, choose M here: the |
| module will be called orion_wdt. |
| |
| config COH901327_WATCHDOG |
| bool "ST-Ericsson COH 901 327 watchdog" |
| depends on ARCH_U300 |
| default y if MACH_U300 |
| help |
| Say Y here to include Watchdog timer support for the |
| watchdog embedded into the ST-Ericsson U300 series platforms. |
| This watchdog is used to reset the system and thus cannot be |
| compiled as a module. |
| |
| config TWL4030_WATCHDOG |
| tristate "TWL4030 Watchdog" |
| depends on TWL4030_CORE |
| help |
| Support for TI TWL4030 watchdog. Say 'Y' here to enable the |
| watchdog timer support for TWL4030 chips. |
| |
| config STMP3XXX_WATCHDOG |
| tristate "Freescale STMP3XXX watchdog" |
| depends on ARCH_STMP3XXX |
| help |
| Say Y here if to include support for the watchdog timer |
| for the Sigmatel STMP37XX/378X SoC. |
| To compile this driver as a module, choose M here: the |
| module will be called stmp3xxx_wdt. |
| |
| config NUC900_WATCHDOG |
| tristate "Nuvoton NUC900 watchdog" |
| depends on ARCH_W90X900 |
| help |
| Say Y here if to include support for the watchdog timer |
| for the Nuvoton NUC900 series SoCs. |
| To compile this driver as a module, choose M here: the |
| module will be called nuc900_wdt. |
| |
| config TS72XX_WATCHDOG |
| tristate "TS-72XX SBC Watchdog" |
| depends on MACH_TS72XX |
| help |
| Technologic Systems TS-7200, TS-7250 and TS-7260 boards have |
| watchdog timer implemented in a external CPLD chip. Say Y here |
| if you want to support for the watchdog timer on TS-72XX boards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ts72xx_wdt. |
| |
| config MAX63XX_WATCHDOG |
| tristate "Max63xx watchdog" |
| depends on ARM && HAS_IOMEM |
| help |
| Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. |
| |
| config IMX2_WDT |
| tristate "IMX2+ Watchdog" |
| depends on IMX_HAVE_PLATFORM_IMX2_WDT |
| help |
| This is the driver for the hardware watchdog |
| on the Freescale IMX2 and later processors. |
| If you have one of these processors and wish to have |
| watchdog support enabled, say Y, otherwise say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called imx2_wdt. |
| |
| # AVR32 Architecture |
| |
| config AT32AP700X_WDT |
| tristate "AT32AP700x watchdog" |
| depends on CPU_AT32AP700X |
| help |
| Watchdog timer embedded into AT32AP700x devices. This will reboot |
| your system when the timeout is reached. |
| |
| # BLACKFIN Architecture |
| |
| config BFIN_WDT |
| tristate "Blackfin On-Chip Watchdog Timer" |
| depends on BLACKFIN |
| ---help--- |
| If you say yes here you will get support for the Blackfin On-Chip |
| Watchdog Timer. If you have one of these processors and wish to |
| have watchdog support enabled, say Y, otherwise say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bfin_wdt. |
| |
| # CRIS Architecture |
| |
| # FRV Architecture |
| |
| # H8300 Architecture |
| |
| # X86 (i386 + ia64 + x86_64) Architecture |
| |
| config ACQUIRE_WDT |
| tristate "Acquire SBC Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog on Single Board |
| Computers produced by Acquire Inc (and others). This watchdog |
| simply watches your kernel to make sure it doesn't freeze, and if |
| it does, it reboots your computer after a certain amount of time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called acquirewdt. |
| |
| Most people will say N. |
| |
| config ADVANTECH_WDT |
| tristate "Advantech SBC Watchdog Timer" |
| depends on X86 |
| help |
| If you are configuring a Linux kernel for the Advantech single-board |
| computer, say `Y' here to support its built-in watchdog timer |
| feature. More information can be found at |
| <http://www.advantech.com.tw/products/> |
| |
| config ALIM1535_WDT |
| tristate "ALi M1535 PMU Watchdog Timer" |
| depends on X86 && PCI |
| ---help--- |
| This is the driver for the hardware watchdog on the ALi M1535 PMU. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called alim1535_wdt. |
| |
| Most people will say N. |
| |
| config ALIM7101_WDT |
| tristate "ALi M7101 PMU Computer Watchdog" |
| depends on PCI |
| help |
| This is the driver for the hardware watchdog on the ALi M7101 PMU |
| as used in the x86 Cobalt servers and also found in some |
| SPARC Netra servers too. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called alim7101_wdt. |
| |
| Most people will say N. |
| |
| config F71808E_WDT |
| tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog" |
| depends on X86 && EXPERIMENTAL |
| help |
| This is the driver for the hardware watchdog on the Fintek |
| F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers. |
| |
| You can compile this driver directly into the kernel, or use |
| it as a module. The module will be called f71808e_wdt. |
| |
| config SP5100_TCO |
| tristate "AMD/ATI SP5100 TCO Timer/Watchdog" |
| depends on X86 && PCI |
| ---help--- |
| Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO |
| (Total Cost of Ownership) timer is a watchdog timer that will reboot |
| the machine after its expiration. The expiration time can be |
| configured with the "heartbeat" parameter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sp5100_tco. |
| |
| config GEODE_WDT |
| tristate "AMD Geode CS5535/CS5536 Watchdog" |
| depends on CS5535_MFGPT |
| help |
| This driver enables a watchdog capability built into the |
| CS5535/CS5536 companion chips for the AMD Geode GX and LX |
| processors. This watchdog watches your kernel to make sure |
| it doesn't freeze, and if it does, it reboots your computer after |
| a certain amount of time. |
| |
| You can compile this driver directly into the kernel, or use |
| it as a module. The module will be called geodewdt. |
| |
| config SC520_WDT |
| tristate "AMD Elan SC520 processor Watchdog" |
| depends on X86 |
| help |
| This is the driver for the hardware watchdog built in to the |
| AMD "Elan" SC520 microcomputer commonly used in embedded systems. |
| This watchdog simply watches your kernel to make sure it doesn't |
| freeze, and if it does, it reboots your computer after a certain |
| amount of time. |
| |
| You can compile this driver directly into the kernel, or use |
| it as a module. The module will be called sc520_wdt. |
| |
| config SBC_FITPC2_WATCHDOG |
| tristate "Compulab SBC-FITPC2 watchdog" |
| depends on X86 |
| ---help--- |
| This is the driver for the built-in watchdog timer on the fit-PC2, |
| fit-PC2i, CM-iAM single-board computers made by Compulab. |
| |
| It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux. |
| When "Watchdog Timer Value" enabled one can set 31-255 s operational range. |
| |
| Entering BIOS setup temporary disables watchdog operation regardless to current state, |
| so system will not be restarted while user in BIOS setup. |
| |
| Once watchdog was enabled the system will be restarted every |
| "Watchdog Timer Value" period, so to prevent it user can restart or |
| disable the watchdog. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sbc_fitpc2_wdt. |
| |
| Most people will say N. |
| |
| config EUROTECH_WDT |
| tristate "Eurotech CPU-1220/1410 Watchdog Timer" |
| depends on X86 |
| help |
| Enable support for the watchdog timer on the Eurotech CPU-1220 and |
| CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product |
| information are at <http://www.eurotech.it/>. |
| |
| config IB700_WDT |
| tristate "IB700 SBC Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog on the IB700 Single |
| Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog |
| simply watches your kernel to make sure it doesn't freeze, and if |
| it does, it reboots your computer after a certain amount of time. |
| |
| This driver is like the WDT501 driver but for slightly different hardware. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ib700wdt. |
| |
| Most people will say N. |
| |
| config IBMASR |
| tristate "IBM Automatic Server Restart" |
| depends on X86 |
| help |
| This is the driver for the IBM Automatic Server Restart watchdog |
| timer built-in into some eServer xSeries machines. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ibmasr. |
| |
| config WAFER_WDT |
| tristate "ICP Single Board Computer Watchdog Timer" |
| depends on X86 |
| help |
| This is a driver for the hardware watchdog on the ICP Single |
| Board Computer. This driver is working on (at least) the following |
| IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wafer5823wdt. |
| |
| config I6300ESB_WDT |
| tristate "Intel 6300ESB Timer/Watchdog" |
| depends on X86 && PCI |
| ---help--- |
| Hardware driver for the watchdog timer built into the Intel |
| 6300ESB controller hub. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called i6300esb. |
| |
| config INTEL_SCU_WATCHDOG |
| bool "Intel SCU Watchdog for Mobile Platforms" |
| depends on X86_MRST |
| ---help--- |
| Hardware driver for the watchdog time built into the Intel SCU |
| for Intel Mobile Platforms. |
| |
| To compile this driver as a module, choose M here. |
| |
| config ITCO_WDT |
| tristate "Intel TCO Timer/Watchdog" |
| depends on (X86 || IA64) && PCI |
| ---help--- |
| Hardware driver for the intel TCO timer based watchdog devices. |
| These drivers are included in the Intel 82801 I/O Controller |
| Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB |
| controller hub. |
| |
| The TCO (Total Cost of Ownership) timer is a watchdog timer |
| that will reboot the machine after its second expiration. The |
| expiration time can be configured with the "heartbeat" parameter. |
| |
| On some motherboards the driver may fail to reset the chipset's |
| NO_REBOOT flag which prevents the watchdog from rebooting the |
| machine. If this is the case you will get a kernel message like |
| "failed to reset NO_REBOOT flag, reboot disabled by hardware". |
| |
| To compile this driver as a module, choose M here: the |
| module will be called iTCO_wdt. |
| |
| config ITCO_VENDOR_SUPPORT |
| bool "Intel TCO Timer/Watchdog Specific Vendor Support" |
| depends on ITCO_WDT |
| ---help--- |
| Add vendor specific support to the intel TCO timer based watchdog |
| devices. At this moment we only have additional support for some |
| SuperMicro Inc. motherboards. |
| |
| config IT8712F_WDT |
| tristate "IT8712F (Smart Guardian) Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the built-in watchdog timer on the IT8712F |
| Super I/0 chipset used on many motherboards. |
| |
| If the driver does not work, then make sure that the game port in |
| the BIOS is enabled. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called it8712f_wdt. |
| |
| config IT87_WDT |
| tristate "IT87 Watchdog Timer" |
| depends on X86 && EXPERIMENTAL |
| ---help--- |
| This is the driver for the hardware watchdog on the ITE IT8702, |
| IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 Super I/O chips. |
| This watchdog simply watches your kernel to make sure it doesn't |
| freeze, and if it does, it reboots your computer after a certain |
| amount of time. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called it87_wdt. |
| |
| config HP_WATCHDOG |
| tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" |
| depends on X86 && PCI |
| help |
| A software monitoring watchdog and NMI sourcing driver. This driver |
| will detect lockups and provide a stack trace. This is a driver that |
| will only load on an HP ProLiant system with a minimum of iLO2 support. |
| To compile this driver as a module, choose M here: the module will be |
| called hpwdt. |
| |
| config HPWDT_NMI_DECODING |
| bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer" |
| depends on HP_WATCHDOG |
| default y |
| help |
| When an NMI occurs this feature will make the necessary BIOS calls to |
| log the cause of the NMI. |
| |
| config SC1200_WDT |
| tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" |
| depends on X86 |
| help |
| This is a driver for National Semiconductor PC87307/PC97307 hardware |
| watchdog cards as found on the SC1200. This watchdog is mainly used |
| for power management purposes and can be used to power down the device |
| during inactivity periods (includes interrupt activity monitoring). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sc1200wdt. |
| |
| Most people will say N. |
| |
| config SCx200_WDT |
| tristate "National Semiconductor SCx200 Watchdog" |
| depends on SCx200 && PCI |
| help |
| Enable the built-in watchdog timer support on the National |
| Semiconductor SCx200 processors. |
| |
| If compiled as a module, it will be called scx200_wdt. |
| |
| config PC87413_WDT |
| tristate "NS PC87413 watchdog" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog on the PC87413 chipset |
| This watchdog simply watches your kernel to make sure it doesn't |
| freeze, and if it does, it reboots your computer after a certain |
| amount of time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pc87413_wdt. |
| |
| Most people will say N. |
| |
| config NV_TCO |
| tristate "nVidia TCO Timer/Watchdog" |
| depends on X86 && PCI |
| ---help--- |
| Hardware driver for the TCO timer built into the nVidia Hub family |
| (such as the MCP51). The TCO (Total Cost of Ownership) timer is a |
| watchdog timer that will reboot the machine after its second |
| expiration. The expiration time can be configured with the |
| "heartbeat" parameter. |
| |
| On some motherboards the driver may fail to reset the chipset's |
| NO_REBOOT flag which prevents the watchdog from rebooting the |
| machine. If this is the case you will get a kernel message like |
| "failed to reset NO_REBOOT flag, reboot disabled by hardware". |
| |
| To compile this driver as a module, choose M here: the |
| module will be called nv_tco. |
| |
| config RDC321X_WDT |
| tristate "RDC R-321x SoC watchdog" |
| depends on X86_RDC321X |
| help |
| This is the driver for the built in hardware watchdog |
| in the RDC R-321x SoC. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rdc321x_wdt. |
| |
| config 60XX_WDT |
| tristate "SBC-60XX Watchdog Timer" |
| depends on X86 |
| help |
| This driver can be used with the watchdog timer found on some |
| single board computers, namely the 6010 PII based computer. |
| It may well work with other cards. It reads port 0x443 to enable |
| and re-set the watchdog timer, and reads port 0x45 to disable |
| the watchdog. If you have a card that behave in similar ways, |
| you can probably make this driver work with your card as well. |
| |
| You can compile this driver directly into the kernel, or use |
| it as a module. The module will be called sbc60xxwdt. |
| |
| config SBC8360_WDT |
| tristate "SBC8360 Watchdog Timer" |
| depends on X86 |
| ---help--- |
| |
| This is the driver for the hardware watchdog on the SBC8360 Single |
| Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sbc8360. |
| |
| Most people will say N. |
| |
| config SBC7240_WDT |
| tristate "SBC Nano 7240 Watchdog Timer" |
| depends on X86_32 && !UML |
| ---help--- |
| This is the driver for the hardware watchdog found on the IEI |
| single board computers EPIC Nano 7240 (and likely others). This |
| watchdog simply watches your kernel to make sure it doesn't freeze, |
| and if it does, it reboots your computer after a certain amount of |
| time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sbc7240_wdt. |
| |
| config CPU5_WDT |
| tristate "SMA CPU5 Watchdog" |
| depends on X86 |
| ---help--- |
| TBD. |
| To compile this driver as a module, choose M here: the |
| module will be called cpu5wdt. |
| |
| config SMSC_SCH311X_WDT |
| tristate "SMSC SCH311X Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog timer on the |
| SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset |
| (LPC IO with 8042 KBC, Reset Generation, HWM and multiple |
| serial ports). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sch311x_wdt. |
| |
| config SMSC37B787_WDT |
| tristate "Winbond SMsC37B787 Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog component on the |
| Winbond SMsC37B787 chipset as used on the NetRunner Mainboard |
| from Vision Systems and maybe others. |
| |
| This watchdog simply watches your kernel to make sure it doesn't |
| freeze, and if it does, it reboots your computer after a certain |
| amount of time. |
| |
| Usually a userspace daemon will notify the kernel WDT driver that |
| userspace is still alive, at regular intervals. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called smsc37b787_wdt. |
| |
| Most people will say N. |
| |
| config VIA_WDT |
| tristate "VIA Watchdog Timer" |
| depends on X86 |
| select WATCHDOG_CORE |
| ---help--- |
| This is the driver for the hardware watchdog timer on VIA |
| southbridge chipset CX700, VX800/VX820 or VX855/VX875. |
| |
| To compile this driver as a module, choose M here; the module |
| will be called via_wdt. |
| |
| Most people will say N. |
| |
| config W83627HF_WDT |
| tristate "W83627HF/W83627DHG Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog on the W83627HF chipset |
| as used in Advantech PC-9578 and Tyan S2721-533 motherboards |
| (and likely others). The driver also supports the W83627DHG chip. |
| This watchdog simply watches your kernel to make sure it doesn't |
| freeze, and if it does, it reboots your computer after a certain |
| amount of time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called w83627hf_wdt. |
| |
| Most people will say N. |
| |
| config W83697HF_WDT |
| tristate "W83697HF/W83697HG Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog on the W83697HF/HG |
| chipset as used in Dedibox/VIA motherboards (and likely others). |
| This watchdog simply watches your kernel to make sure it doesn't |
| freeze, and if it does, it reboots your computer after a certain |
| amount of time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called w83697hf_wdt. |
| |
| Most people will say N. |
| |
| config W83697UG_WDT |
| tristate "W83697UG/W83697UF Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog on the W83697UG/UF |
| chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others). |
| This watchdog simply watches your kernel to make sure it doesn't |
| freeze, and if it does, it reboots your computer after a certain |
| amount of time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called w83697ug_wdt. |
| |
| Most people will say N. |
| |
| config W83877F_WDT |
| tristate "W83877F (EMACS) Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog on the W83877F chipset |
| as used in EMACS PC-104 motherboards (and likely others). This |
| watchdog simply watches your kernel to make sure it doesn't freeze, |
| and if it does, it reboots your computer after a certain amount of |
| time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called w83877f_wdt. |
| |
| Most people will say N. |
| |
| config W83977F_WDT |
| tristate "W83977F (PCM-5335) Watchdog Timer" |
| depends on X86 |
| ---help--- |
| This is the driver for the hardware watchdog on the W83977F I/O chip |
| as used in AAEON's PCM-5335 SBC (and likely others). This |
| watchdog simply watches your kernel to make sure it doesn't freeze, |
| and if it does, it reboots your computer after a certain amount of |
| time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called w83977f_wdt. |
| |
| config MACHZ_WDT |
| tristate "ZF MachZ Watchdog" |
| depends on X86 |
| ---help--- |
| If you are using a ZF Micro MachZ processor, say Y here, otherwise |
| N. This is the driver for the watchdog timer built-in on that |
| processor using ZF-Logic interface. This watchdog simply watches |
| your kernel to make sure it doesn't freeze, and if it does, it |
| reboots your computer after a certain amount of time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called machzwd. |
| |
| config SBC_EPX_C3_WATCHDOG |
| tristate "Winsystems SBC EPX-C3 watchdog" |
| depends on X86 |
| ---help--- |
| This is the driver for the built-in watchdog timer on the EPX-C3 |
| Single-board computer made by Winsystems, Inc. |
| |
| *Note*: This hardware watchdog is not probeable and thus there |
| is no way to know if writing to its IO address will corrupt |
| your system or have any real effect. The only way to be sure |
| that this driver does what you want is to make sure you |
| are running it on an EPX-C3 from Winsystems with the watchdog |
| timer at IO address 0x1ee and 0x1ef. It will write to both those |
| IO ports. Basically, the assumption is made that if you compile |
| this driver into your kernel and/or load it as a module, that you |
| know what you are doing and that you are in fact running on an |
| EPX-C3 board! |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sbc_epx_c3. |
| |
| # M32R Architecture |
| |
| # M68K Architecture |
| |
| config M54xx_WATCHDOG |
| tristate "MCF54xx watchdog support" |
| depends on M548x |
| help |
| To compile this driver as a module, choose M here: the |
| module will be called m54xx_wdt. |
| |
| # MicroBlaze Architecture |
| |
| config XILINX_WATCHDOG |
| tristate "Xilinx Watchdog timer" |
| depends on MICROBLAZE |
| ---help--- |
| Watchdog driver for the xps_timebase_wdt ip core. |
| |
| IMPORTANT: The xps_timebase_wdt parent must have the property |
| "clock-frequency" at device tree. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called of_xilinx_wdt. |
| |
| # MIPS Architecture |
| |
| config ATH79_WDT |
| tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog" |
| depends on ATH79 |
| help |
| Hardware driver for the built-in watchdog timer on the Atheros |
| AR71XX/AR724X/AR913X SoCs. |
| |
| config BCM47XX_WDT |
| tristate "Broadcom BCM47xx Watchdog Timer" |
| depends on BCM47XX |
| help |
| Hardware driver for the Broadcom BCM47xx Watchog Timer. |
| |
| config RC32434_WDT |
| tristate "IDT RC32434 SoC Watchdog Timer" |
| depends on MIKROTIK_RB532 |
| help |
| Hardware driver for the IDT RC32434 SoC built-in |
| watchdog timer. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rc32434_wdt. |
| |
| config INDYDOG |
| tristate "Indy/I2 Hardware Watchdog" |
| depends on SGI_HAS_INDYDOG |
| help |
| Hardware driver for the Indy's/I2's watchdog. This is a |
| watchdog timer that will reboot the machine after a 60 second |
| timer expired and no process has written to /dev/watchdog during |
| that time. |
| |
| config JZ4740_WDT |
| tristate "Ingenic jz4740 SoC hardware watchdog" |
| depends on MACH_JZ4740 |
| help |
| Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs. |
| |
| config WDT_MTX1 |
| tristate "MTX-1 Hardware Watchdog" |
| depends on MIPS_MTX1 |
| help |
| Hardware driver for the MTX-1 boards. This is a watchdog timer that |
| will reboot the machine after a 100 seconds timer expired. |
| |
| config PNX833X_WDT |
| tristate "PNX833x Hardware Watchdog" |
| depends on SOC_PNX8335 |
| help |
| Hardware driver for the PNX833x's watchdog. This is a |
| watchdog timer that will reboot the machine after a programmable |
| timer has expired and no process has written to /dev/watchdog during |
| that time. |
| |
| config SIBYTE_WDOG |
| tristate "Sibyte SoC hardware watchdog" |
| depends on CPU_SB1 |
| help |
| Watchdog driver for the built in watchdog hardware in Sibyte |
| SoC processors. There are apparently two watchdog timers |
| on such processors; this driver supports only the first one, |
| because currently Linux only supports exporting one watchdog |
| to userspace. |
| |
| To compile this driver as a loadable module, choose M here. |
| The module will be called sb_wdog. |
| |
| config AR7_WDT |
| tristate "TI AR7 Watchdog Timer" |
| depends on AR7 |
| help |
| Hardware driver for the TI AR7 Watchdog Timer. |
| |
| config TXX9_WDT |
| tristate "Toshiba TXx9 Watchdog Timer" |
| depends on CPU_TX39XX || CPU_TX49XX |
| help |
| Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. |
| |
| config OCTEON_WDT |
| tristate "Cavium OCTEON SOC family Watchdog Timer" |
| depends on CPU_CAVIUM_OCTEON |
| default y |
| select EXPORT_UASM if OCTEON_WDT = m |
| help |
| Hardware driver for OCTEON's on chip watchdog timer. |
| Enables the watchdog for all cores running Linux. It |
| installs a NMI handler and pokes the watchdog based on an |
| interrupt. On first expiration of the watchdog, the |
| interrupt handler pokes it. The second expiration causes an |
| NMI that prints a message. The third expiration causes a |
| global soft reset. |
| |
| When userspace has /dev/watchdog open, no poking is done |
| from the first interrupt, it is then only poked when the |
| device is written. |
| |
| config BCM63XX_WDT |
| tristate "Broadcom BCM63xx hardware watchdog" |
| depends on BCM63XX |
| help |
| Watchdog driver for the built in watchdog hardware in Broadcom |
| BCM63xx SoC. |
| |
| To compile this driver as a loadable module, choose M here. |
| The module will be called bcm63xx_wdt. |
| |
| config LANTIQ_WDT |
| tristate "Lantiq SoC watchdog" |
| depends on LANTIQ |
| help |
| Hardware driver for the Lantiq SoC Watchdog Timer. |
| |
| # PARISC Architecture |
| |
| # POWERPC Architecture |
| |
| config GEF_WDT |
| tristate "GE Watchdog Timer" |
| depends on GE_FPGA |
| ---help--- |
| Watchdog timer found in a number of GE single board computers. |
| |
| config MPC5200_WDT |
| bool "MPC52xx Watchdog Timer" |
| depends on PPC_MPC52xx |
| help |
| Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog. |
| |
| config 8xxx_WDT |
| tristate "MPC8xxx Platform Watchdog Timer" |
| depends on PPC_8xx || PPC_83xx || PPC_86xx |
| help |
| This driver is for a SoC level watchdog that exists on some |
| Freescale PowerPC processors. So far this driver supports: |
| - MPC8xx watchdogs |
| - MPC83xx watchdogs |
| - MPC86xx watchdogs |
| |
| For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. |
| |
| config MV64X60_WDT |
| tristate "MV64X60 (Marvell Discovery) Watchdog Timer" |
| depends on MV64X60 |
| |
| config PIKA_WDT |
| tristate "PIKA FPGA Watchdog" |
| depends on WARP |
| default y |
| help |
| This enables the watchdog in the PIKA FPGA. Currently used on |
| the Warp platform. |
| |
| config BOOKE_WDT |
| tristate "PowerPC Book-E Watchdog Timer" |
| depends on BOOKE || 4xx |
| ---help--- |
| Watchdog driver for PowerPC Book-E chips, such as the Freescale |
| MPC85xx SOCs and the IBM PowerPC 440. |
| |
| Please see Documentation/watchdog/watchdog-api.txt for |
| more information. |
| |
| config BOOKE_WDT_DEFAULT_TIMEOUT |
| int "PowerPC Book-E Watchdog Timer Default Timeout" |
| depends on BOOKE_WDT |
| default 38 if FSL_BOOKE |
| range 0 63 if FSL_BOOKE |
| default 3 if !FSL_BOOKE |
| range 0 3 if !FSL_BOOKE |
| help |
| Select the default watchdog timer period to be used by the PowerPC |
| Book-E watchdog driver. A watchdog "event" occurs when the bit |
| position represented by this number transitions from zero to one. |
| |
| For Freescale Book-E processors, this is a number between 0 and 63. |
| For other Book-E processors, this is a number between 0 and 3. |
| |
| The value can be overridden by the wdt_period command-line parameter. |
| |
| # PPC64 Architecture |
| |
| config WATCHDOG_RTAS |
| tristate "RTAS watchdog" |
| depends on PPC_RTAS |
| help |
| This driver adds watchdog support for the RTAS watchdog. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called wdrtas. |
| |
| # S390 Architecture |
| |
| config ZVM_WATCHDOG |
| tristate "z/VM Watchdog Timer" |
| depends on S390 |
| help |
| IBM s/390 and zSeries machines running under z/VM 5.1 or later |
| provide a virtual watchdog timer to their guest that cause a |
| user define Control Program command to be executed after a |
| timeout. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called vmwatchdog. |
| |
| # SUPERH (sh + sh64) Architecture |
| |
| config SH_WDT |
| tristate "SuperH Watchdog" |
| depends on SUPERH && (CPU_SH3 || CPU_SH4) |
| help |
| This driver adds watchdog support for the integrated watchdog in the |
| SuperH processors. If you have one of these processors and wish |
| to have watchdog support enabled, say Y, otherwise say N. |
| |
| As a side note, saying Y here will automatically boost HZ to 1000 |
| so that the timer has a chance to clear the overflow counter. On |
| slower systems (such as the SH-2 and SH-3) this will likely yield |
| some performance issues. As such, the WDT should be avoided here |
| unless it is absolutely necessary. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called shwdt. |
| |
| # SPARC Architecture |
| |
| # SPARC64 Architecture |
| |
| config WATCHDOG_CP1XXX |
| tristate "CP1XXX Hardware Watchdog support" |
| depends on SPARC64 && PCI |
| ---help--- |
| This is the driver for the hardware watchdog timers present on |
| Sun Microsystems CompactPCI models CP1400 and CP1500. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cpwatchdog. |
| |
| If you do not have a CompactPCI model CP1400 or CP1500, or |
| another UltraSPARC-IIi-cEngine boardset with hardware watchdog, |
| you should say N to this option. |
| |
| config WATCHDOG_RIO |
| tristate "RIO Hardware Watchdog support" |
| depends on SPARC64 && PCI |
| help |
| Say Y here to support the hardware watchdog capability on Sun RIO |
| machines. The watchdog timeout period is normally one minute but |
| can be changed with a boot-time parameter. |
| |
| # XTENSA Architecture |
| |
| # Xen Architecture |
| |
| config XEN_WDT |
| tristate "Xen Watchdog support" |
| depends on XEN |
| help |
| Say Y here to support the hypervisor watchdog capability provided |
| by Xen 4.0 and newer. The watchdog timeout period is normally one |
| minute but can be changed with a boot-time parameter. |
| |
| config UML_WATCHDOG |
| tristate "UML watchdog" |
| depends on UML |
| |
| # |
| # ISA-based Watchdog Cards |
| # |
| |
| comment "ISA-based Watchdog Cards" |
| depends on ISA |
| |
| config PCWATCHDOG |
| tristate "Berkshire Products ISA-PC Watchdog" |
| depends on ISA |
| ---help--- |
| This is the driver for the Berkshire Products ISA-PC Watchdog card. |
| This card simply watches your kernel to make sure it doesn't freeze, |
| and if it does, it reboots your computer after a certain amount of |
| time. This driver is like the WDT501 driver but for different |
| hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC |
| watchdog cards can be ordered from <http://www.berkprod.com/>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pcwd. |
| |
| Most people will say N. |
| |
| config MIXCOMWD |
| tristate "Mixcom Watchdog" |
| depends on ISA |
| ---help--- |
| This is a driver for the Mixcom hardware watchdog cards. This |
| watchdog simply watches your kernel to make sure it doesn't freeze, |
| and if it does, it reboots your computer after a certain amount of |
| time. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mixcomwd. |
| |
| Most people will say N. |
| |
| config WDT |
| tristate "WDT Watchdog timer" |
| depends on ISA |
| ---help--- |
| If you have a WDT500P or WDT501P watchdog board, say Y here, |
| otherwise N. It is not possible to probe for this board, which means |
| that you have to inform the kernel about the IO port and IRQ that |
| is needed (you can do this via the io and irq parameters) |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wdt. |
| |
| # |
| # PCI-based Watchdog Cards |
| # |
| |
| comment "PCI-based Watchdog Cards" |
| depends on PCI |
| |
| config PCIPCWATCHDOG |
| tristate "Berkshire Products PCI-PC Watchdog" |
| depends on PCI |
| ---help--- |
| This is the driver for the Berkshire Products PCI-PC Watchdog card. |
| This card simply watches your kernel to make sure it doesn't freeze, |
| and if it does, it reboots your computer after a certain amount of |
| time. The card can also monitor the internal temperature of the PC. |
| More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pcwd_pci. |
| |
| Most people will say N. |
| |
| config WDTPCI |
| tristate "PCI-WDT500/501 Watchdog timer" |
| depends on PCI |
| ---help--- |
| If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. |
| |
| If you have a PCI-WDT501 watchdog board then you can enable the |
| temperature sensor by setting the type parameter to 501. |
| |
| If you want to enable the Fan Tachometer on the PCI-WDT501, then you |
| can do this via the tachometer parameter. Only do this if you have a |
| fan tachometer actually set up. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wdt_pci. |
| |
| # |
| # USB-based Watchdog Cards |
| # |
| |
| comment "USB-based Watchdog Cards" |
| depends on USB |
| |
| config USBPCWATCHDOG |
| tristate "Berkshire Products USB-PC Watchdog" |
| depends on USB |
| ---help--- |
| This is the driver for the Berkshire Products USB-PC Watchdog card. |
| This card simply watches your kernel to make sure it doesn't freeze, |
| and if it does, it reboots your computer after a certain amount of |
| time. The card can also monitor the internal temperature of the PC. |
| More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pcwd_usb. |
| |
| Most people will say N. |
| |
| endif # WATCHDOG |