Merge branch 'dt' of git://github.com/hzhuang1/linux into next/dt
* 'dt' of git://github.com/hzhuang1/linux:
Documentation: update docs for mmp dt
ARM: dts: refresh dts file for arch mmp
ARM: mmp: support pxa910 with device tree
ARM: mmp: support mmp2 with device tree
gpio: pxa: parse gpio from DTS file
ARM: mmp: support DT in timer
ARM: mmp: support DT in irq
ARM: mmp: append CONFIG_MACH_MMP2_DT
ARM: mmp: fix build issue on mmp with device tree
Includes an update to v3-4-rc5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 253a35c..28a9af9 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -17,14 +17,14 @@
SPEAr (Platform)
- SPEAr3XX (3XX SOC series, based on ARM9)
- SPEAr300 (SOC)
- - SPEAr300_EVB (Evaluation Board)
+ - SPEAr300 Evaluation Board
- SPEAr310 (SOC)
- - SPEAr310_EVB (Evaluation Board)
+ - SPEAr310 Evaluation Board
- SPEAr320 (SOC)
- - SPEAr320_EVB (Evaluation Board)
+ - SPEAr320 Evaluation Board
- SPEAr6XX (6XX SOC series, based on ARM9)
- SPEAr600 (SOC)
- - SPEAr600_EVB (Evaluation Board)
+ - SPEAr600 Evaluation Board
- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
- SPEAr1300 (SOC)
@@ -51,10 +51,11 @@
Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
- mach-spear* also contains board specific files for each machine type.
+ mach-spear* doesn't contains board specific files as they fully support
+ Flattened Device Tree.
Document Author
---------------
- Viresh Kumar, (c) 2010 ST Microelectronics
+ Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt
new file mode 100644
index 0000000..539adca
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt
@@ -0,0 +1,38 @@
+* NXP LPC32xx Main Interrupt Controller
+ (MIC, including SIC1 and SIC2 secondary controllers)
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-mic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- interrupt-parent: Empty for the interrupt controller itself
+- #interrupt-cells: The number of cells to define the interrupts. Should be 2.
+ The first cell is the IRQ number
+ The second cell is used to specify mode:
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+ Default for internal sources should be set to 4 (active high).
+- reg: Should contain MIC registers location and length
+
+Examples:
+ /*
+ * MIC
+ */
+ mic: interrupt-controller@40008000 {
+ compatible = "nxp,lpc3220-mic";
+ interrupt-controller;
+ interrupt-parent;
+ #interrupt-cells = <2>;
+ reg = <0x40008000 0xC000>;
+ };
+
+ /*
+ * ADC
+ */
+ adc@40048000 {
+ compatible = "nxp,lpc3220-adc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <39 4>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/lpc32xx.txt b/Documentation/devicetree/bindings/arm/lpc32xx.txt
new file mode 100644
index 0000000..56ec8dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/lpc32xx.txt
@@ -0,0 +1,8 @@
+NXP LPC32xx Platforms Device Tree Bindings
+------------------------------------------
+
+Boards with the NXP LPC32xx SoC shall have the following properties:
+
+Required root node property:
+
+compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250"
diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt
index f8e54f0..aa5f355 100644
--- a/Documentation/devicetree/bindings/arm/spear.txt
+++ b/Documentation/devicetree/bindings/arm/spear.txt
@@ -6,3 +6,21 @@
Required root node property:
compatible = "st,spear600";
+
+Boards with the ST SPEAr300 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear300";
+
+Boards with the ST SPEAr310 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear310";
+
+Boards with the ST SPEAr320 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear320";
diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
new file mode 100644
index 0000000..ee87467
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
@@ -0,0 +1,31 @@
+Nomadik GPIO controller
+
+Required properties:
+- compatible : Should be "st,nomadik-gpio".
+- reg : Physical base address and length of the controller's registers.
+- interrupts : The interrupt outputs from the controller.
+- #gpio-cells : Should be two:
+ The first cell is the pin number.
+ The second cell is used to specify optional parameters:
+ - bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupt-controller : Marks the device node as an interrupt controller.
+- gpio-bank : Specifies which bank a controller owns.
+- st,supports-sleepmode : Specifies whether controller can sleep or not
+
+Example:
+
+ gpio1: gpio@8012e080 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x8012e080 0x80>;
+ interrupts = <0 120 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ supports-sleepmode;
+ gpio-bank = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/pnx.txt b/Documentation/devicetree/bindings/i2c/pnx.txt
new file mode 100644
index 0000000..fe98ada
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/pnx.txt
@@ -0,0 +1,36 @@
+* NXP PNX I2C Controller
+
+Required properties:
+
+ - reg: Offset and length of the register set for the device
+ - compatible: should be "nxp,pnx-i2c"
+ - interrupts: configure one interrupt line
+ - #address-cells: always 1 (for i2c addresses)
+ - #size-cells: always 0
+ - interrupt-parent: the phandle for the interrupt controller that
+ services interrupts for this device.
+
+Optional properties:
+
+ - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
+
+Examples:
+
+ i2c1: i2c@400a0000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a0000 0x100>;
+ interrupt-parent = <&mic>;
+ interrupts = <51 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@400a8000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a8000 0x100>;
+ interrupt-parent = <&mic>;
+ interrupts = <50 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/net/lpc-eth.txt b/Documentation/devicetree/bindings/net/lpc-eth.txt
new file mode 100644
index 0000000..585021a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lpc-eth.txt
@@ -0,0 +1,24 @@
+* NXP LPC32xx SoC Ethernet Controller
+
+Required properties:
+- compatible: Should be "nxp,lpc-eth"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain ethernet controller interrupt
+
+Optional properties:
+- phy-mode: String, operation mode of the PHY interface.
+ Supported values are: "mii", "rmii" (default)
+- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
+- local-mac-address : 6 bytes, mac address
+
+Example:
+
+ mac: ethernet@31060000 {
+ compatible = "nxp,lpc-eth";
+ reg = <0x31060000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <29 0>;
+
+ phy-mode = "rmii";
+ use-iram;
+ };
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4cf9d42..f10b8649 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -340,8 +340,8 @@
select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
help
- This enables support for systems based on the Atmel AT91RM9200,
- AT91SAM9 processors.
+ This enables support for systems based on Atmel
+ AT91RM9200 and AT91SAM9* processors.
config ARCH_BCMRING
bool "Broadcom BCMRING"
@@ -597,6 +597,7 @@
select USB_ARCH_HAS_OHCI
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
+ select USE_OF
help
Support for the NXP LPC32XX family of processors
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
new file mode 100644
index 0000000..f4605ff
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -0,0 +1,238 @@
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9260 family SoC";
+ compatible = "atmel,at91sam9260";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ serial5 = &usart4;
+ serial6 = &usart5;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x04000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <2>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ };
+
+ ramc0: ramc@ffffea00 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffea00 0x200>;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ };
+
+ pit: timer@fffffd30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffd30 0xf>;
+ interrupts = <1 4>;
+ };
+
+ tcb0: timer@fffa0000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa0000 0x100>;
+ interrupts = <17 4 18 4 19 4>;
+ };
+
+ tcb1: timer@fffdc000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffdc000 0x100>;
+ interrupts = <26 4 27 4 28 4>;
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <2 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <3 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <4 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 4>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffb0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fffb4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fffb8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fffd0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd0000 0x200>;
+ interrupts = <23 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart4: serial@fffd4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd4000 0x200>;
+ interrupts = <24 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart5: serial@fffd8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd8000 0x200>;
+ interrupts = <25 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ macb0: ethernet@fffc4000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xfffc4000 0x100>;
+ interrupts = <21 4>;
+ status = "disabled";
+ };
+
+ usb1: gadget@fffa4000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffa4000 0x4000>;
+ interrupts = <10 4>;
+ status = "disabled";
+ };
+ };
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000
+ 0xffffe800 0x200
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ gpios = <&pioC 13 0
+ &pioC 14 0
+ 0
+ >;
+ status = "disabled";
+ };
+
+ usb0: ohci@00500000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00500000 0x100000>;
+ interrupts = <20 4>;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 23 0 /* sda */
+ &pioA 24 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
new file mode 100644
index 0000000..0209913
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -0,0 +1,220 @@
+/*
+ * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9263 family SoC";
+ compatible = "atmel,at91sam9263";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ gpio4 = &pioE;
+ tcb0 = &tcb0;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <2>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ ramc: ramc@ffffe200 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffe200 0x200
+ 0xffffe800 0x200>;
+ };
+
+ pit: timer@fffffd30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffd30 0xf>;
+ interrupts = <1 4>;
+ };
+
+ tcb0: timer@fff7c000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfff7c000 0x100>;
+ interrupts = <19 4>;
+ };
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x100>;
+ interrupts = <2 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <3 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <4 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <4 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x100>;
+ interrupts = <4 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ dbgu: serial@ffffee00 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xffffee00 0x200>;
+ interrupts = <1 4>;
+ status = "disabled";
+ };
+
+ usart0: serial@fff8c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff8c000 0x200>;
+ interrupts = <7 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fff90000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff90000 0x200>;
+ interrupts = <8 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fff94000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff94000 0x200>;
+ interrupts = <9 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ macb0: ethernet@fffbc000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xfffbc000 0x100>;
+ interrupts = <21 4>;
+ status = "disabled";
+ };
+
+ usb1: gadget@fff78000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfff78000 0x4000>;
+ interrupts = <24 4>;
+ status = "disabled";
+ };
+ };
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000
+ 0xffffe000 0x200
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ gpios = <&pioA 22 0
+ &pioD 15 0
+ 0
+ >;
+ status = "disabled";
+ };
+
+ usb0: ohci@00a00000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00a00000 0x100000>;
+ interrupts = <29 4>;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioB 4 0 /* sda */
+ &pioB 5 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
new file mode 100644
index 0000000..f86ac4b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -0,0 +1,156 @@
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+ model = "Atmel at91sam9263ek";
+ compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <16367660>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ usart0: serial@fff8c000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffbc000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fff78000 {
+ atmel,vbus-gpio = <&pioA 25 0>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt = <1>;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+
+ usb0: ohci@00a00000 {
+ num-ports = <2>;
+ status = "okay";
+ atmel,vbus-gpio = <&pioA 24 0
+ &pioA 21 0
+ >;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d3 {
+ label = "d3";
+ gpios = <&pioB 7 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ d2 {
+ label = "d2";
+ gpios = <&pioC 29 1>;
+ linux,default-trigger = "nand-disk";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ left_click {
+ label = "left_click";
+ gpios = <&pioC 5 1>;
+ linux,code = <272>;
+ gpio-key,wakeup;
+ };
+
+ right_click {
+ label = "right_click";
+ gpios = <&pioC 4 1>;
+ linux,code = <273>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ 24c512@50 {
+ compatible = "24c512";
+ reg = <0x50>;
+ pagesize = <128>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 773ef48..0eb1a753 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -1,238 +1,18 @@
/*
* at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
*
- * Copyright (C) 2011 Atmel,
- * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
- * Licensed under GPLv2 or later.
+ * Licensed under GPLv2.
*/
-/include/ "skeleton.dtsi"
+/include/ "at91sam9260.dtsi"
/ {
model = "Atmel AT91SAM9G20 family SoC";
compatible = "atmel,at91sam9g20";
- interrupt-parent = <&aic>;
-
- aliases {
- serial0 = &dbgu;
- serial1 = &usart0;
- serial2 = &usart1;
- serial3 = &usart2;
- serial4 = &usart3;
- serial5 = &usart4;
- serial6 = &usart5;
- gpio0 = &pioA;
- gpio1 = &pioB;
- gpio2 = &pioC;
- tcb0 = &tcb0;
- tcb1 = &tcb1;
- };
- cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
- };
- };
memory {
reg = <0x20000000 0x08000000>;
};
-
- ahb {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- apb {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- aic: interrupt-controller@fffff000 {
- #interrupt-cells = <2>;
- compatible = "atmel,at91rm9200-aic";
- interrupt-controller;
- reg = <0xfffff000 0x200>;
- };
-
- ramc0: ramc@ffffea00 {
- compatible = "atmel,at91sam9260-sdramc";
- reg = <0xffffea00 0x200>;
- };
-
- pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
- reg = <0xfffffc00 0x100>;
- };
-
- rstc@fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
- };
-
- shdwc@fffffd10 {
- compatible = "atmel,at91sam9260-shdwc";
- reg = <0xfffffd10 0x10>;
- };
-
- pit: timer@fffffd30 {
- compatible = "atmel,at91sam9260-pit";
- reg = <0xfffffd30 0xf>;
- interrupts = <1 4>;
- };
-
- tcb0: timer@fffa0000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfffa0000 0x100>;
- interrupts = <17 4 18 4 19 4>;
- };
-
- tcb1: timer@fffdc000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfffdc000 0x100>;
- interrupts = <26 4 27 4 28 4>;
- };
-
- pioA: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- pioB: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <3 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- pioC: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- dbgu: serial@fffff200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffff200 0x200>;
- interrupts = <1 4>;
- status = "disabled";
- };
-
- usart0: serial@fffb0000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb0000 0x200>;
- interrupts = <6 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart1: serial@fffb4000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb4000 0x200>;
- interrupts = <7 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart2: serial@fffb8000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb8000 0x200>;
- interrupts = <8 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart3: serial@fffd0000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd0000 0x200>;
- interrupts = <23 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart4: serial@fffd4000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd4000 0x200>;
- interrupts = <24 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart5: serial@fffd8000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd8000 0x200>;
- interrupts = <25 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- macb0: ethernet@fffc4000 {
- compatible = "cdns,at32ap7000-macb", "cdns,macb";
- reg = <0xfffc4000 0x100>;
- interrupts = <21 4>;
- status = "disabled";
- };
-
- usb1: gadget@fffa4000 {
- compatible = "atmel,at91rm9200-udc";
- reg = <0xfffa4000 0x4000>;
- interrupts = <10 4>;
- status = "disabled";
- };
- };
-
- nand0: nand@40000000 {
- compatible = "atmel,at91rm9200-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x40000000 0x10000000
- 0xffffe800 0x200
- >;
- atmel,nand-addr-offset = <21>;
- atmel,nand-cmd-offset = <22>;
- gpios = <&pioC 13 0
- &pioC 14 0
- 0
- >;
- status = "disabled";
- };
-
- usb0: ohci@00500000 {
- compatible = "atmel,at91rm9200-ohci", "usb-ohci";
- reg = <0x00500000 0x100000>;
- interrupts = <20 4>;
- status = "disabled";
- };
- };
-
- i2c@0 {
- compatible = "i2c-gpio";
- gpios = <&pioA 23 0 /* sda */
- &pioA 24 0 /* scl */
- >;
- i2c-gpio,sda-open-drain;
- i2c-gpio,scl-open-drain;
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
};
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts
new file mode 100644
index 0000000..e5324bf
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20ek_common.dtsi"
+
+/ {
+ model = "Atmel at91sam9g20ek";
+ compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioA 9 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&pioA 6 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
new file mode 100644
index 0000000..f1b2e14
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20ek_common.dtsi"
+
+/ {
+ model = "Atmel at91sam9g20ek 2 mmc";
+ compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioB 9 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&pioB 8 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
new file mode 100644
index 0000000..b06c0db
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -0,0 +1,142 @@
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/include/ "at91sam9g20.dtsi"
+
+/ {
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 0>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ 24c512@50 {
+ compatible = "24c512";
+ reg = <0x50>;
+ };
+
+ wm8731@1b {
+ compatible = "wm8731";
+ reg = <0x1b>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ btn3 {
+ label = "Buttin 3";
+ gpios = <&pioA 30 1>;
+ linux,code = <0x103>;
+ gpio-key,wakeup;
+ };
+
+ btn4 {
+ label = "Buttin 4";
+ gpios = <&pioA 31 1>;
+ linux,code = <0x104>;
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index 14bc307..881bc39 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -55,83 +55,101 @@
gpio0: gpio@8012e000 {
compatible = "stericsson,db8500-gpio",
- "stmicroelectronics,nomadik-gpio";
+ "st,nomadik-gpio";
reg = <0x8012e000 0x80>;
interrupts = <0 119 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <0>;
};
gpio1: gpio@8012e080 {
compatible = "stericsson,db8500-gpio",
- "stmicroelectronics,nomadik-gpio";
+ "st,nomadik-gpio";
reg = <0x8012e080 0x80>;
interrupts = <0 120 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <1>;
};
gpio2: gpio@8000e000 {
compatible = "stericsson,db8500-gpio",
- "stmicroelectronics,nomadik-gpio";
+ "st,nomadik-gpio";
reg = <0x8000e000 0x80>;
interrupts = <0 121 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <2>;
};
gpio3: gpio@8000e080 {
compatible = "stericsson,db8500-gpio",
- "stmicroelectronics,nomadik-gpio";
+ "st,nomadik-gpio";
reg = <0x8000e080 0x80>;
interrupts = <0 122 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <3>;
};
gpio4: gpio@8000e100 {
compatible = "stericsson,db8500-gpio",
- "stmicroelectronics,nomadik-gpio";
+ "st,nomadik-gpio";
reg = <0x8000e100 0x80>;
interrupts = <0 123 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <4>;
};
gpio5: gpio@8000e180 {
compatible = "stericsson,db8500-gpio",
- "stmicroelectronics,nomadik-gpio";
+ "st,nomadik-gpio";
reg = <0x8000e180 0x80>;
interrupts = <0 124 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <5>;
};
gpio6: gpio@8011e000 {
compatible = "stericsson,db8500-gpio",
- "stmicroelectronics,nomadik-gpio";
+ "st,nomadik-gpio";
reg = <0x8011e000 0x80>;
interrupts = <0 125 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <6>;
};
gpio7: gpio@8011e080 {
compatible = "stericsson,db8500-gpio",
- "stmicroelectronics,nomadik-gpio";
+ "st,nomadik-gpio";
reg = <0x8011e080 0x80>;
interrupts = <0 126 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <7>;
};
gpio8: gpio@a03fe000 {
compatible = "stericsson,db8500-gpio",
- "stmicroelectronics,nomadik-gpio";
+ "st,nomadik-gpio";
reg = <0xa03fe000 0x80>;
interrupts = <0 127 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <8>;
};
usb@a03e0000 {
@@ -153,7 +171,13 @@
reg = <0x80157000 0x1000>;
interrupts = <46 47>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges;
+
+ prcmu-timer-4@80157450 {
+ compatible = "stericsson,db8500-prcmu-timer-4";
+ reg = <0x80157450 0xC>;
+ };
ab8500@5 {
compatible = "stericsson,ab8500";
@@ -163,7 +187,7 @@
};
i2c@80004000 {
- compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
reg = <0x80004000 0x1000>;
interrupts = <0 21 0x4>;
#address-cells = <1>;
@@ -171,7 +195,7 @@
};
i2c@80122000 {
- compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
reg = <0x80122000 0x1000>;
interrupts = <0 22 0x4>;
#address-cells = <1>;
@@ -179,7 +203,7 @@
};
i2c@80128000 {
- compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
reg = <0x80128000 0x1000>;
interrupts = <0 55 0x4>;
#address-cells = <1>;
@@ -187,7 +211,7 @@
};
i2c@80110000 {
- compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
reg = <0x80110000 0x1000>;
interrupts = <0 12 0x4>;
#address-cells = <1>;
@@ -195,7 +219,7 @@
};
i2c@8012a000 {
- compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
reg = <0x8012a000 0x1000>;
interrupts = <0 51 0x4>;
#address-cells = <1>;
@@ -270,5 +294,14 @@
interrupts = <0 100 0x4>;
status = "disabled";
};
+
+ external-bus@50000000 {
+ compatible = "simple-bus";
+ reg = <0x50000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50000000 0x4000000>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
new file mode 100644
index 0000000..1ea9d34
--- /dev/null
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -0,0 +1,84 @@
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+ model = "Ethernut 5";
+ compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+ };
+
+ memory {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 0>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ gpios = <0
+ &pioC 14 0
+ 0
+ >;
+
+ root@0 {
+ label = "root";
+ reg = <0x0 0x08000000>;
+ };
+
+ data@20000 {
+ label = "data";
+ reg = <0x08000000 0x38000000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ pcf8563@50 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
new file mode 100644
index 0000000..e8814fe
--- /dev/null
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -0,0 +1,138 @@
+/*
+ * kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+
+/ {
+
+ model = "Overkiz kizbox";
+ compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
+ };
+
+ memory {
+ reg = <0x20000000 0x2000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "mii";
+ status = "okay";
+ };
+
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ status = "okay";
+
+ bootloaderkernel@0 {
+ label = "bootloader-kernel";
+ reg = <0x0 0xc0000>;
+ };
+
+ ubi@c0000 {
+ label = "ubi";
+ reg = <0xc0000 0x7f40000>;
+ };
+
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <1>;
+ status = "okay";
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ pcf8563@51 {
+ /* nxp pcf8563 rtc */
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1g {
+ label = "led1:green";
+ gpios = <&pioB 0 1>;
+ linux,default-trigger = "none";
+ };
+
+ led1r {
+ label = "led1:red";
+ gpios = <&pioB 1 1>;
+ linux,default-trigger = "none";
+ };
+
+ led2g {
+ label = "led2:green";
+ gpios = <&pioB 2 1>;
+ linux,default-trigger = "none";
+ default-state = "on";
+ };
+
+ led2r {
+ label = "led2:red";
+ gpios = <&pioB 3 1>;
+ linux,default-trigger = "none";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "reset";
+ gpios = <&pioB 30 1>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&pioB 31 1>;
+ linux,code = <0x101>;
+ gpio-key,wakeup;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
new file mode 100644
index 0000000..2d69686
--- /dev/null
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -0,0 +1,292 @@
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "nxp,lpc3220";
+ interrupt-parent = <&mic>;
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x20000000 0x20000000 0x30000000>;
+
+ /*
+ * Enable either SLC or MLC
+ */
+ slc: flash@20020000 {
+ compatible = "nxp,lpc3220-slc";
+ reg = <0x20020000 0x1000>;
+ status = "disable";
+ };
+
+ mlc: flash@200B0000 {
+ compatible = "nxp,lpc3220-mlc";
+ reg = <0x200B0000 0x1000>;
+ status = "disable";
+ };
+
+ dma@31000000 {
+ compatible = "arm,pl080", "arm,primecell";
+ reg = <0x31000000 0x1000>;
+ interrupts = <0x1c 0>;
+ };
+
+ /*
+ * Enable either ohci or usbd (gadget)!
+ */
+ ohci@31020000 {
+ compatible = "nxp,ohci-nxp", "usb-ohci";
+ reg = <0x31020000 0x300>;
+ interrupts = <0x3b 0>;
+ status = "disable";
+ };
+
+ usbd@31020000 {
+ compatible = "nxp,lpc3220-udc";
+ reg = <0x31020000 0x300>;
+ interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+ status = "disable";
+ };
+
+ clcd@31040000 {
+ compatible = "arm,pl110", "arm,primecell";
+ reg = <0x31040000 0x1000>;
+ interrupts = <0x0e 0>;
+ status = "disable";
+ };
+
+ mac: ethernet@31060000 {
+ compatible = "nxp,lpc-eth";
+ reg = <0x31060000 0x1000>;
+ interrupts = <0x1d 0>;
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x20000000 0x20000000 0x30000000>;
+
+ ssp0: ssp@20084000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x20084000 0x1000>;
+ interrupts = <0x14 0>;
+ };
+
+ spi1: spi@20088000 {
+ compatible = "nxp,lpc3220-spi";
+ reg = <0x20088000 0x1000>;
+ };
+
+ ssp1: ssp@2008c000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x2008c000 0x1000>;
+ interrupts = <0x15 0>;
+ };
+
+ spi2: spi@20090000 {
+ compatible = "nxp,lpc3220-spi";
+ reg = <0x20090000 0x1000>;
+ };
+
+ i2s0: i2s@20094000 {
+ compatible = "nxp,lpc3220-i2s";
+ reg = <0x20094000 0x1000>;
+ };
+
+ sd@20098000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x20098000 0x1000>;
+ interrupts = <0x0f 0>, <0x0d 0>;
+ };
+
+ i2s1: i2s@2009C000 {
+ compatible = "nxp,lpc3220-i2s";
+ reg = <0x2009C000 0x1000>;
+ };
+
+ uart3: serial@40080000 {
+ compatible = "nxp,serial";
+ reg = <0x40080000 0x1000>;
+ };
+
+ uart4: serial@40088000 {
+ compatible = "nxp,serial";
+ reg = <0x40088000 0x1000>;
+ };
+
+ uart5: serial@40090000 {
+ compatible = "nxp,serial";
+ reg = <0x40090000 0x1000>;
+ };
+
+ uart6: serial@40098000 {
+ compatible = "nxp,serial";
+ reg = <0x40098000 0x1000>;
+ };
+
+ i2c1: i2c@400A0000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400A0000 0x100>;
+ interrupts = <0x33 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pnx,timeout = <0x64>;
+ };
+
+ i2c2: i2c@400A8000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400A8000 0x100>;
+ interrupts = <0x32 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pnx,timeout = <0x64>;
+ };
+
+ i2cusb: i2c@31020300 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x31020300 0x100>;
+ interrupts = <0x3f 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pnx,timeout = <0x64>;
+ };
+ };
+
+ fab {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x20000000 0x20000000 0x30000000>;
+
+ /*
+ * MIC Interrupt controller includes:
+ * MIC @40008000
+ * SIC1 @4000C000
+ * SIC2 @40010000
+ */
+ mic: interrupt-controller@40008000 {
+ compatible = "nxp,lpc3220-mic";
+ interrupt-controller;
+ reg = <0x40008000 0xC000>;
+ #interrupt-cells = <2>;
+ };
+
+ uart1: serial@40014000 {
+ compatible = "nxp,serial";
+ reg = <0x40014000 0x1000>;
+ };
+
+ uart2: serial@40018000 {
+ compatible = "nxp,serial";
+ reg = <0x40018000 0x1000>;
+ };
+
+ uart7: serial@4001C000 {
+ compatible = "nxp,serial";
+ reg = <0x4001C000 0x1000>;
+ };
+
+ rtc@40024000 {
+ compatible = "nxp,lpc3220-rtc";
+ reg = <0x40024000 0x1000>;
+ interrupts = <0x34 0>;
+ };
+
+ gpio: gpio@40028000 {
+ compatible = "nxp,lpc3220-gpio";
+ reg = <0x40028000 0x1000>;
+ /* create a private address space for enumeration */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio_p0: gpio-bank@0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ };
+
+ gpio_p1: gpio-bank@1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <1>;
+ };
+
+ gpio_p2: gpio-bank@2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <2>;
+ };
+
+ gpio_p3: gpio-bank@3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <3>;
+ };
+
+ gpi_p3: gpio-bank@4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <4>;
+ };
+
+ gpo_p3: gpio-bank@5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <5>;
+ };
+ };
+
+ watchdog@4003C000 {
+ compatible = "nxp,pnx4008-wdt";
+ reg = <0x4003C000 0x1000>;
+ };
+
+ /*
+ * TSC vs. ADC: Since those two share the same
+ * hardware, you need to choose from one of the
+ * following two and do 'status = "okay";' for one of
+ * them
+ */
+
+ adc@40048000 {
+ compatible = "nxp,lpc3220-adc";
+ reg = <0x40048000 0x1000>;
+ interrupts = <0x27 0>;
+ status = "disable";
+ };
+
+ tsc@40048000 {
+ compatible = "nxp,lpc3220-tsc";
+ reg = <0x40048000 0x1000>;
+ interrupts = <0x27 0>;
+ status = "disable";
+ };
+
+ key@40050000 {
+ compatible = "nxp,lpc3220-key";
+ reg = <0x40050000 0x1000>;
+ };
+
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 9f72cd4..8c756be 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -18,3 +18,52 @@
reg = <0x80000000 0x20000000>; /* 512 MB */
};
};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ vsim: regulator@10 {
+ compatible = "ti,twl4030-vsim";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in the EEPROM
+ * as EDID data.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ ti,bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disable";
+};
+
+&mmc3 {
+ status = "disable";
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index c612135..99474fa 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -69,6 +69,60 @@
reg = <0x48200000 0x1000>;
};
+ gpio1: gpio@48310000 {
+ compatible = "ti,omap3-gpio";
+ ti,hwmods = "gpio1";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@49050000 {
+ compatible = "ti,omap3-gpio";
+ ti,hwmods = "gpio2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@49052000 {
+ compatible = "ti,omap3-gpio";
+ ti,hwmods = "gpio3";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio@49054000 {
+ compatible = "ti,omap3-gpio";
+ ti,hwmods = "gpio4";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@49056000 {
+ compatible = "ti,omap3-gpio";
+ ti,hwmods = "gpio5";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@49058000 {
+ compatible = "ti,omap3-gpio";
+ ti,hwmods = "gpio6";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
@@ -113,5 +167,53 @@
#size-cells = <0>;
ti,hwmods = "i2c3";
};
+
+ mcspi1: spi@48098000 {
+ compatible = "ti,omap2-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi1";
+ ti,spi-num-cs = <4>;
+ };
+
+ mcspi2: spi@4809a000 {
+ compatible = "ti,omap2-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi2";
+ ti,spi-num-cs = <2>;
+ };
+
+ mcspi3: spi@480b8000 {
+ compatible = "ti,omap2-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi3";
+ ti,spi-num-cs = <2>;
+ };
+
+ mcspi4: spi@480ba000 {
+ compatible = "ti,omap2-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi4";
+ ti,spi-num-cs = <1>;
+ };
+
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap3-hsmmc";
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap3-hsmmc";
+ ti,hwmods = "mmc2";
+ };
+
+ mmc3: mmc@480ad000 {
+ compatible = "ti,omap3-hsmmc";
+ ti,hwmods = "mmc3";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9755ad5..e671361 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -17,4 +17,75 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "pandaboard::status1";
+ gpios = <&gpio1 7 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "pandaboard::status2";
+ gpios = <&gpio1 8 0>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in their EEPROM as EDID data.
+ * The EEPROM is connected as I2C slave device.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ ti,bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disable";
+};
+
+&mmc3 {
+ status = "disable";
+};
+
+&mmc4 {
+ status = "disable";
+};
+
+&mmc5 {
+ ti,non-removable;
+ ti,bus-width = <4>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 63c6b2b..e5eeb6f 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -17,4 +17,144 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ vdd_eth: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_ETH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 16 0>; /* gpio line 48 */
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ debug0 {
+ label = "omap4:green:debug0";
+ gpios = <&gpio2 29 0>; /* 61 */
+ };
+
+ debug1 {
+ label = "omap4:green:debug1";
+ gpios = <&gpio1 30 0>; /* 30 */
+ };
+
+ debug2 {
+ label = "omap4:green:debug2";
+ gpios = <&gpio1 7 0>; /* 7 */
+ };
+
+ debug3 {
+ label = "omap4:green:debug3";
+ gpios = <&gpio1 8 0>; /* 8 */
+ };
+
+ debug4 {
+ label = "omap4:green:debug4";
+ gpios = <&gpio2 18 0>; /* 50 */
+ };
+
+ user1 {
+ label = "omap4:blue:user";
+ gpios = <&gpio6 9 0>; /* 169 */
+ };
+
+ user2 {
+ label = "omap4:red:user";
+ gpios = <&gpio6 10 0>; /* 170 */
+ };
+
+ user3 {
+ label = "omap4:green:user";
+ gpios = <&gpio5 11 0>; /* 139 */
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * Temperature Sensor
+ * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+ */
+ tmp105@48 {
+ compatible = "ti,tmp105";
+ reg = <0x48>;
+ };
+
+ /*
+ * Ambient Light Sensor
+ * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+ */
+ bh1780@29 {
+ compatible = "rohm,bh1780";
+ reg = <0x29>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ /*
+ * 3-Axis Digital Compass
+ * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+ */
+ hmc5843@1e {
+ compatible = "honeywell,hmc5843";
+ reg = <0x1e>;
+ };
+};
+
+&mcspi1 {
+ eth@0 {
+ compatible = "ks8851";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2>; /* gpio line 34 */
+ vdd-supply = <&vdd_eth>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ ti,bus-width = <8>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vaux1>;
+ ti,bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ status = "disable";
+};
+
+&mmc4 {
+ status = "disable";
+};
+
+&mmc5 {
+ ti,bus-width = <4>;
+ ti,non-removable;
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3d35559..359c497 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -104,6 +104,60 @@
<0x48240100 0x0100>;
};
+ gpio1: gpio@4a310000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio1";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@48055000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@48057000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio3";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio@48059000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio4";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@4805b000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio5";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@4805d000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio6";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart1";
@@ -155,5 +209,68 @@
#size-cells = <0>;
ti,hwmods = "i2c4";
};
+
+ mcspi1: spi@48098000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi1";
+ ti,spi-num-cs = <4>;
+ };
+
+ mcspi2: spi@4809a000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi2";
+ ti,spi-num-cs = <2>;
+ };
+
+ mcspi3: spi@480b8000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi3";
+ ti,spi-num-cs = <2>;
+ };
+
+ mcspi4: spi@480ba000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi4";
+ ti,spi-num-cs = <1>;
+ };
+
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ ti,needs-special-reset;
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc2";
+ ti,needs-special-reset;
+ };
+
+ mmc3: mmc@480ad000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc3";
+ ti,needs-special-reset;
+ };
+
+ mmc4: mmc@480d1000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc4";
+ ti,needs-special-reset;
+ };
+
+ mmc5: mmc@480d5000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc5";
+ ti,needs-special-reset;
+ };
};
};
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
new file mode 100644
index 0000000..0167e86
--- /dev/null
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -0,0 +1,145 @@
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "lpc32xx.dtsi"
+
+/ {
+ model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+ compatible = "phytec,phy3250", "nxp,lpc3250";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x4000000>;
+ };
+
+ ahb {
+ mac: ethernet@31060000 {
+ phy-mode = "rmii";
+ use-iram;
+ };
+
+ /* Here, choose exactly one from: ohci, usbd */
+ ohci@31020000 {
+ transceiver = <&isp1301>;
+ status = "okay";
+ };
+
+/*
+ usbd@31020000 {
+ transceiver = <&isp1301>;
+ status = "okay";
+ };
+*/
+
+ clcd@31040000 {
+ status = "okay";
+ };
+
+ /* 64MB Flash via SLC NAND controller */
+ slc: flash@20020000 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mtd0@00000000 {
+ label = "phy3250-boot";
+ reg = <0x00000000 0x00064000>;
+ read-only;
+ };
+
+ mtd1@00064000 {
+ label = "phy3250-uboot";
+ reg = <0x00064000 0x00190000>;
+ read-only;
+ };
+
+ mtd2@001f4000 {
+ label = "phy3250-ubt-prms";
+ reg = <0x001f4000 0x00010000>;
+ };
+
+ mtd3@00204000 {
+ label = "phy3250-kernel";
+ reg = <0x00204000 0x00400000>;
+ };
+
+ mtd4@00604000 {
+ label = "phy3250-rootfs";
+ reg = <0x00604000 0x039fc000>;
+ };
+ };
+
+ apb {
+ i2c1: i2c@400A0000 {
+ clock-frequency = <100000>;
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ uda1380: uda1380@18 {
+ compatible = "nxp,uda1380";
+ reg = <0x18>;
+ power-gpio = <&gpio 0x59 0>;
+ reset-gpio = <&gpio 0x51 0>;
+ dac-clk = "wspll";
+ };
+ };
+
+ i2c2: i2c@400A8000 {
+ clock-frequency = <100000>;
+ };
+
+ i2cusb: i2c@31020300 {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2c {
+ compatible = "nxp,isp1301";
+ reg = <0x2c>;
+ };
+ };
+
+ ssp0: ssp@20084000 {
+ eeprom: at25@0 {
+ compatible = "atmel,at25";
+ };
+ };
+ };
+
+ fab {
+ tsc@40048000 {
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ gpios = <&gpo_p3 1 1>; /* GPO_P3 1, GPIO 80, active low */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led1 {
+ gpios = <&gpo_p3 14 1>; /* GPO_P3 14, GPIO 93, active low */
+ linux,default-trigger = "timer";
+ default-state = "off";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
new file mode 100644
index 0000000..677fc60
--- /dev/null
+++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -0,0 +1,21 @@
+/*
+ * Device Tree Source for the sh7372 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "renesas,sh7372";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 359c6d6..d99dc04 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -30,35 +30,35 @@
wakeup = <1>;
linux,code = <2>;
label = "userpb";
- gpios = <&gpio1 0>;
+ gpios = <&gpio1 0 0>;
};
button@2 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <3>;
- label = "userpb";
- gpios = <&gpio4 23>;
+ label = "extkb1";
+ gpios = <&gpio4 23 0>;
};
button@3 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <4>;
- label = "userpb";
- gpios = <&gpio4 23>;
+ label = "extkb2";
+ gpios = <&gpio4 24 0>;
};
button@4 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <5>;
- label = "userpb";
- gpios = <&gpio5 1>;
+ label = "extkb3";
+ gpios = <&gpio5 1 0>;
};
button@5 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <6>;
- label = "userpb";
- gpios = <&gpio5 2>;
+ label = "extkb4";
+ gpios = <&gpio5 2 0>;
};
};
@@ -73,17 +73,19 @@
soc-u9500 {
external-bus@50000000 {
- compatible = "simple-bus";
- reg = <0x50000000 0x10000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ status = "okay";
- ethernet@50000000 {
- compatible = "smsc,9111";
- reg = <0x50000000 0x10000>;
- interrupts = <12>;
+ ethernet@0 {
+ compatible = "smsc,lan9115";
+ reg = <0 0x10000>;
+ interrupts = <12 0x1>;
interrupt-parent = <&gpio4>;
+
+ reg-shift = <1>;
+ reg-io-width = <2>;
+ smsc,force-internal-phy;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
};
};
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
new file mode 100644
index 0000000..6a79d69
--- /dev/null
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -0,0 +1,183 @@
+/*
+ * DTS file for SPEAr300 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear300.dtsi"
+
+/ {
+ model = "ST SPEAr300 Evaluation Board";
+ compatible = "st,spear300-evb", "st,spear300";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ clcd@60000000 {
+ status = "okay";
+ };
+
+ dma@fc400000 {
+ status = "okay";
+ };
+
+ fsmc: flash@94000000 {
+ status = "okay";
+ };
+
+ gmac: eth@e0800000 {
+ status = "okay";
+ };
+
+ sdhci@70000000 {
+ int-gpio = <&gpio1 0 0>;
+ power-gpio = <&gpio1 2 1>;
+ status = "okay";
+ };
+
+ smi: flash@fc000000 {
+ status = "okay";
+ };
+
+ spi0: spi@d0100000 {
+ status = "okay";
+ };
+
+ ehci@e1800000 {
+ status = "okay";
+ };
+
+ ohci@e1900000 {
+ status = "okay";
+ };
+
+ ohci@e2100000 {
+ status = "okay";
+ };
+
+ apb {
+ gpio0: gpio@fc980000 {
+ status = "okay";
+ };
+
+ gpio1: gpio@a9000000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@d0180000 {
+ status = "okay";
+ };
+
+ kbd@a0000000 {
+ linux,keymap = < 0x00000001
+ 0x00010002
+ 0x00020003
+ 0x00030004
+ 0x00040005
+ 0x00050006
+ 0x00060007
+ 0x00070008
+ 0x00080009
+ 0x0100000a
+ 0x0101000c
+ 0x0102000d
+ 0x0103000e
+ 0x0104000f
+ 0x01050010
+ 0x01060011
+ 0x01070012
+ 0x01080013
+ 0x02000014
+ 0x02010015
+ 0x02020016
+ 0x02030017
+ 0x02040018
+ 0x02050019
+ 0x0206001a
+ 0x0207001b
+ 0x0208001c
+ 0x0300001d
+ 0x0301001e
+ 0x0302001f
+ 0x03030020
+ 0x03040021
+ 0x03050022
+ 0x03060023
+ 0x03070024
+ 0x03080025
+ 0x04000026
+ 0x04010027
+ 0x04020028
+ 0x04030029
+ 0x0404002a
+ 0x0405002b
+ 0x0406002c
+ 0x0407002d
+ 0x0408002e
+ 0x0500002f
+ 0x05010030
+ 0x05020031
+ 0x05030032
+ 0x05040033
+ 0x05050034
+ 0x05060035
+ 0x05070036
+ 0x05080037
+ 0x06000038
+ 0x06010039
+ 0x0602003a
+ 0x0603003b
+ 0x0604003c
+ 0x0605003d
+ 0x0606003e
+ 0x0607003f
+ 0x06080040
+ 0x07000041
+ 0x07010042
+ 0x07020043
+ 0x07030044
+ 0x07040045
+ 0x07050046
+ 0x07060047
+ 0x07070048
+ 0x07080049
+ 0x0800004a
+ 0x0801004b
+ 0x0802004c
+ 0x0803004d
+ 0x0804004e
+ 0x0805004f
+ 0x08060050
+ 0x08070051
+ 0x08080052 >;
+ autorepeat;
+ st,mode = <0>;
+ status = "okay";
+ };
+
+ rtc@fc900000 {
+ status = "okay";
+ };
+
+ serial@d0000000 {
+ status = "okay";
+ };
+
+ wdt@fc880000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
new file mode 100644
index 0000000..f9fcbf4
--- /dev/null
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -0,0 +1,72 @@
+/*
+ * DTS file for SPEAr300 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x60000000 0x60000000 0x50000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ clcd@60000000 {
+ compatible = "arm,clcd-pl110", "arm,primecell";
+ reg = <0x60000000 0x1000>;
+ interrupts = <30>;
+ status = "disabled";
+ };
+
+ fsmc: flash@94000000 {
+ compatible = "st,spear600-fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x94000000 0x1000 /* FSMC Register */
+ 0x80000000 0x0010>; /* NAND Base */
+ reg-names = "fsmc_regs", "nand_data";
+ st,ale-off = <0x20000>;
+ st,cle-off = <0x10000>;
+ status = "disabled";
+ };
+
+ sdhci@70000000 {
+ compatible = "st,sdhci-spear";
+ reg = <0x70000000 0x100>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xa0000000 0xa0000000 0x10000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ gpio1: gpio@a9000000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xa9000000 0x1000>;
+ status = "disabled";
+ };
+
+ kbd@a0000000 {
+ compatible = "st,spear300-kbd";
+ reg = <0xa0000000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
new file mode 100644
index 0000000..c86af33
--- /dev/null
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -0,0 +1,111 @@
+/*
+ * DTS file for SPEAr310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear310.dtsi"
+
+/ {
+ model = "ST SPEAr310 Evaluation Board";
+ compatible = "st,spear310-evb", "st,spear310";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ dma@fc400000 {
+ status = "okay";
+ };
+
+ fsmc: flash@44000000 {
+ status = "okay";
+ };
+
+ gmac: eth@e0800000 {
+ status = "okay";
+ };
+
+ smi: flash@fc000000 {
+ status = "okay";
+ clock-rate=<50000000>;
+
+ flash@f8000000 {
+ label = "m25p64";
+ reg = <0xf8000000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ st,smi-fast-mode;
+ };
+ };
+
+ spi0: spi@d0100000 {
+ status = "okay";
+ };
+
+ ehci@e1800000 {
+ status = "okay";
+ };
+
+ ohci@e1900000 {
+ status = "okay";
+ };
+
+ ohci@e2100000 {
+ status = "okay";
+ };
+
+ apb {
+ gpio0: gpio@fc980000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@d0180000 {
+ status = "okay";
+ };
+
+ rtc@fc900000 {
+ status = "okay";
+ };
+
+ serial@d0000000 {
+ status = "okay";
+ };
+
+ serial@b2000000 {
+ status = "okay";
+ };
+
+ serial@b2080000 {
+ status = "okay";
+ };
+
+ serial@b2100000 {
+ status = "okay";
+ };
+
+ serial@b2180000 {
+ status = "okay";
+ };
+
+ serial@b2200000 {
+ status = "okay";
+ };
+
+ wdt@fc880000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
new file mode 100644
index 0000000..dc7fa14
--- /dev/null
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -0,0 +1,75 @@
+/*
+ * DTS file for SPEAr310 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x40000000 0x40000000 0x10000000
+ 0xb0000000 0xb0000000 0x10000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ fsmc: flash@44000000 {
+ compatible = "st,spear600-fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x44000000 0x1000 /* FSMC Register */
+ 0x40000000 0x0010>; /* NAND Base */
+ reg-names = "fsmc_regs", "nand_data";
+ st,ale-off = <0x10000>;
+ st,cle-off = <0x20000>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xb0000000 0xb0000000 0x10000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ serial@b2000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2000000 0x1000>;
+ status = "disabled";
+ };
+
+ serial@b2080000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2080000 0x1000>;
+ status = "disabled";
+ };
+
+ serial@b2100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2100000 0x1000>;
+ status = "disabled";
+ };
+
+ serial@b2180000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2180000 0x1000>;
+ status = "disabled";
+ };
+
+ serial@b2200000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2200000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
new file mode 100644
index 0000000..d43de71
--- /dev/null
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -0,0 +1,112 @@
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+ model = "ST SPEAr300 Evaluation Board";
+ compatible = "st,spear300-evb", "st,spear300";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ clcd@90000000 {
+ status = "okay";
+ };
+
+ dma@fc400000 {
+ status = "okay";
+ };
+
+ fsmc: flash@4c000000 {
+ status = "okay";
+ };
+
+ gmac: eth@e0800000 {
+ status = "okay";
+ };
+
+ sdhci@70000000 {
+ power-gpio = <&gpio0 2 1>;
+ power_always_enb;
+ status = "okay";
+ };
+
+ smi: flash@fc000000 {
+ status = "okay";
+ };
+
+ spi0: spi@d0100000 {
+ status = "okay";
+ };
+
+ spi1: spi@a5000000 {
+ status = "okay";
+ };
+
+ spi2: spi@a6000000 {
+ status = "okay";
+ };
+
+ ehci@e1800000 {
+ status = "okay";
+ };
+
+ ohci@e1900000 {
+ status = "okay";
+ };
+
+ ohci@e2100000 {
+ status = "okay";
+ };
+
+ apb {
+ gpio0: gpio@fc980000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@d0180000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@a7000000 {
+ status = "okay";
+ };
+
+ rtc@fc900000 {
+ status = "okay";
+ };
+
+ serial@d0000000 {
+ status = "okay";
+ };
+
+ serial@a3000000 {
+ status = "okay";
+ };
+
+ serial@a4000000 {
+ status = "okay";
+ };
+
+ wdt@fc880000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
new file mode 100644
index 0000000..9a0267a
--- /dev/null
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -0,0 +1,90 @@
+/*
+ * DTS file for SPEAr320 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x40000000 0x40000000 0x70000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ clcd@90000000 {
+ compatible = "arm,clcd-pl110", "arm,primecell";
+ reg = <0x90000000 0x1000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ fsmc: flash@4c000000 {
+ compatible = "st,spear600-fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x4c000000 0x1000 /* FSMC Register */
+ 0x50000000 0x0010>; /* NAND Base */
+ reg-names = "fsmc_regs", "nand_data";
+ st,ale-off = <0x20000>;
+ st,cle-off = <0x10000>;
+ status = "disabled";
+ };
+
+ sdhci@70000000 {
+ compatible = "st,sdhci-spear";
+ reg = <0x70000000 0x100>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ spi1: spi@a5000000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xa5000000 0x1000>;
+ status = "disabled";
+ };
+
+ spi2: spi@a6000000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xa6000000 0x1000>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xa0000000 0xa0000000 0x10000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ i2c1: i2c@a7000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xa7000000 0x1000>;
+ status = "disabled";
+ };
+
+ serial@a3000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xa3000000 0x1000>;
+ status = "disabled";
+ };
+
+ serial@a4000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xa4000000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
new file mode 100644
index 0000000..0ae7c8e
--- /dev/null
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -0,0 +1,144 @@
+/*
+ * DTS file for all SPEAr3xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&vic>;
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+ vic: interrupt-controller@f1100000 {
+ compatible = "arm,pl190-vic";
+ interrupt-controller;
+ reg = <0xf1100000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ dma@fc400000 {
+ compatible = "arm,pl080", "arm,primecell";
+ reg = <0xfc400000 0x1000>;
+ interrupt-parent = <&vic>;
+ interrupts = <8>;
+ status = "disabled";
+ };
+
+ gmac: eth@e0800000 {
+ compatible = "st,spear600-gmac";
+ reg = <0xe0800000 0x8000>;
+ interrupts = <23 22>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ status = "disabled";
+ };
+
+ smi: flash@fc000000 {
+ compatible = "st,spear600-smi";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xfc000000 0x1000>;
+ interrupts = <9>;
+ status = "disabled";
+ };
+
+ spi0: spi@d0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xd0100000 0x1000>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ ehci@e1800000 {
+ compatible = "st,spear600-ehci", "usb-ehci";
+ reg = <0xe1800000 0x1000>;
+ interrupts = <26>;
+ status = "disabled";
+ };
+
+ ohci@e1900000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe1900000 0x1000>;
+ interrupts = <25>;
+ status = "disabled";
+ };
+
+ ohci@e2100000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe2100000 0x1000>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+ gpio0: gpio@fc980000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc980000 0x1000>;
+ interrupts = <11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@d0180000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xd0180000 0x1000>;
+ interrupts = <21>;
+ status = "disabled";
+ };
+
+ rtc@fc900000 {
+ compatible = "st,spear-rtc";
+ reg = <0xfc900000 0x1000>;
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ serial@d0000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xd0000000 0x1000>;
+ interrupts = <19>;
+ status = "disabled";
+ };
+
+ wdt@fc880000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0xfc880000 0x1000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
index 636292e..790a7a8 100644
--- a/arch/arm/boot/dts/spear600-evb.dts
+++ b/arch/arm/boot/dts/spear600-evb.dts
@@ -24,6 +24,10 @@
};
ahb {
+ dma@fc400000 {
+ status = "okay";
+ };
+
gmac: ethernet@e0800000 {
phy-mode = "gmii";
status = "okay";
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index ebe0885..d777e3a 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -45,6 +45,14 @@
#interrupt-cells = <1>;
};
+ dma@fc400000 {
+ compatible = "arm,pl080", "arm,primecell";
+ reg = <0xfc400000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ status = "disabled";
+ };
+
gmac: ethernet@e0800000 {
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts
new file mode 100644
index 0000000..367a16d
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260.dts
@@ -0,0 +1,15 @@
+/*
+ * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+/include/ "tny_a9260_common.dtsi"
+
+/ {
+ model = "Calao TNY A9260";
+ compatible = "calao,tny-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
new file mode 100644
index 0000000..0e6d3de
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -0,0 +1,83 @@
+/*
+ * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/ {
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
new file mode 100644
index 0000000..dee9c57
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -0,0 +1,97 @@
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+ model = "Calao TNY A9263";
+ compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ usb1: gadget@fff78000 {
+ atmel,vbus-gpio = <&pioB 11 0>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts
new file mode 100644
index 0000000..e1ab64c
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9g20.dts
@@ -0,0 +1,15 @@
+/*
+ * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+/include/ "tny_a9260_common.dtsi"
+
+/ {
+ model = "Calao TNY A9G20";
+ compatible = "calao,tny-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
new file mode 100644
index 0000000..22f4d13
--- /dev/null
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ */
+&twl {
+ compatible = "ti,twl4030";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+
+ vdac: regulator@0 {
+ compatible = "ti,twl4030-vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vpll2: regulator@1 {
+ compatible = "ti,twl4030-vpll2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vmmc1: regulator@2 {
+ compatible = "ti,twl4030-vmmc1";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ twl_gpio: gpio {
+ compatible = "ti,twl4030-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
new file mode 100644
index 0000000..3b2f351
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+&twl {
+ compatible = "ti,twl6030";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+
+ vaux1: regulator@0 {
+ compatible = "ti,twl6030-vaux1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vaux2: regulator@1 {
+ compatible = "ti,twl6030-vaux2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vaux3: regulator@2 {
+ compatible = "ti,twl6030-vaux3";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vmmc: regulator@3 {
+ compatible = "ti,twl6030-vmmc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vpp: regulator@4 {
+ compatible = "ti,twl6030-vpp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ vusim: regulator@5 {
+ compatible = "ti,twl6030-vusim";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ vdac: regulator@6 {
+ compatible = "ti,twl6030-vdac";
+ };
+
+ vana: regulator@7 {
+ compatible = "ti,twl6030-vana";
+ };
+
+ vcxio: regulator@8 {
+ compatible = "ti,twl6030-vcxio";
+ };
+
+ vusb: regulator@9 {
+ compatible = "ti,twl6030-vusb";
+ };
+
+ v1v8: regulator@10 {
+ compatible = "ti,twl6030-v1v8";
+ };
+
+ v2v1: regulator@11 {
+ compatible = "ti,twl6030-v2v1";
+ };
+
+ clk32kg: regulator@12 {
+ compatible = "ti,twl6030-clk32kg";
+ };
+};
diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts
new file mode 100644
index 0000000..2962160
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9260.dts
@@ -0,0 +1,23 @@
+/*
+ * usb_a9260.dts - Device Tree file for Caloa USB A9260 board
+ *
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+/include/ "usb_a9260_common.dtsi"
+
+/ {
+ model = "Calao USB A9260";
+ compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
new file mode 100644
index 0000000..e70d229
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -0,0 +1,117 @@
+/*
+ * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ *
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 0>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_led {
+ label = "user_led";
+ gpios = <&pioB 21 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&pioB 10 1>;
+ linux,code = <28>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
new file mode 100644
index 0000000..6fe05cc
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -0,0 +1,131 @@
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+ model = "Calao USB A9263";
+ compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffbc000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fff78000 {
+ atmel,vbus-gpio = <&pioB 11 0>;
+ status = "okay";
+ };
+
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree@80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+
+ usb0: ohci@00a00000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_led {
+ label = "user_led";
+ gpios = <&pioB 21 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&pioB 10 1>;
+ linux,code = <28>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index 7c2399c..2dacb16 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -7,6 +7,7 @@
*/
/dts-v1/;
/include/ "at91sam9g20.dtsi"
+/include/ "usb_a9260_common.dtsi"
/ {
model = "Calao USB A9G20";
@@ -20,108 +21,7 @@
reg = <0x20000000 0x4000000>;
};
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
- };
-
- ahb {
- apb {
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
- usb1: gadget@fffa4000 {
- atmel,vbus-gpio = <&pioC 5 0>;
- status = "okay";
- };
- };
-
- nand0: nand@40000000 {
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- nand-on-flash-bbt;
- status = "okay";
-
- at91bootstrap@0 {
- label = "at91bootstrap";
- reg = <0x0 0x20000>;
- };
-
- barebox@20000 {
- label = "barebox";
- reg = <0x20000 0x40000>;
- };
-
- bareboxenv@60000 {
- label = "bareboxenv";
- reg = <0x60000 0x20000>;
- };
-
- bareboxenv2@80000 {
- label = "bareboxenv2";
- reg = <0x80000 0x20000>;
- };
-
- kernel@a0000 {
- label = "kernel";
- reg = <0xa0000 0x400000>;
- };
-
- rootfs@4a0000 {
- label = "rootfs";
- reg = <0x4a0000 0x7800000>;
- };
-
- data@7ca0000 {
- label = "data";
- reg = <0x7ca0000 0x8360000>;
- };
- };
-
- usb0: ohci@00500000 {
- num-ports = <2>;
- status = "okay";
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- user_led {
- label = "user_led";
- gpios = <&pioB 21 1>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- user_pb {
- label = "user_pb";
- gpios = <&pioB 10 1>;
- linux,code = <28>;
- gpio-key,wakeup;
- };
- };
-
i2c@0 {
- status = "okay";
-
rv3029c2@56 {
compatible = "rv3029c2";
reg = <0x56>;
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
new file mode 100644
index 0000000..67bc571
--- /dev/null
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -0,0 +1,196 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9263=y
+CONFIG_SOC_AT91SAM9G45=y
+CONFIG_SOC_AT91SAM9X5=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m
+CONFIG_AVERAGE=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index bbe4e1a..d54e2ac 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -14,6 +14,7 @@
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91RM9200=y
CONFIG_MACH_ONEARM=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_AT91RM9200EK=y
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index fb20881..4fa6054 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -2,7 +2,7 @@
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
@@ -10,6 +10,7 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
+CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
@@ -21,6 +22,8 @@
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
CONFIG_CPU_IDLE=y
CONFIG_FPE_NWFPE=y
@@ -40,7 +43,8 @@
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
@@ -55,13 +59,24 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT25=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
-CONFIG_PHYLIB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_LPC_ENET=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -97,16 +112,22 @@
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_SOC=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_LPC32XX=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
@@ -114,10 +135,21 @@
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1374=y
+CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_LPC32XX=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_STAGING=y
+CONFIG_IIO=y
+CONFIG_LPC32XX_ADC=y
CONFIG_EXT2_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index fea7e1f..7ed4291 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -2,33 +2,67 @@
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_PLAT_SPEAR=y
-CONFIG_BOARD_SPEAR300_EVB=y
-CONFIG_BOARD_SPEAR310_EVB=y
-CONFIG_BOARD_SPEAR320_EVB=y
+CONFIG_MACH_SPEAR300=y
+CONFIG_MACH_SPEAR310=y
+CONFIG_MACH_SPEAR320=y
CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PL061=y
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_SECURITY=y
@@ -39,8 +73,6 @@
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
@@ -48,6 +80,4 @@
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index cef2e83..cf94bc7 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -2,29 +2,58 @@
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR6XX=y
-CONFIG_BOARD_SPEAR600_EVB=y
+CONFIG_BOARD_SPEAR600_DT=y
CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PL061=y
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_SECURITY=y
@@ -35,8 +64,6 @@
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
@@ -44,6 +71,4 @@
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45db05d..98a42f3 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,15 +9,6 @@
config HAVE_AT91_DBGU1
bool
-config HAVE_AT91_USART3
- bool
-
-config HAVE_AT91_USART4
- bool
-
-config HAVE_AT91_USART5
- bool
-
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
@@ -26,87 +17,121 @@
bool
default !ARCH_AT91X40
+config SOC_AT91SAM9
+ bool
+ select GENERIC_CLOCKEVENTS
+ select CPU_ARM926T
+
menu "Atmel AT91 System-on-Chip"
-choice
- prompt "Atmel AT91 Processor"
+comment "Atmel AT91 Processor"
-config ARCH_AT91RM9200
+config SOC_AT91SAM9
+ bool
+ select CPU_ARM926T
+ select AT91_SAM9_TIME
+ select AT91_SAM9_SMC
+
+config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
- select HAVE_AT91_USART3
+
+config SOC_AT91SAM9260
+ bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU0
+ select HAVE_NET_MACB
+ help
+ Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
+ or AT91SAM9G20 SoC.
+
+config SOC_AT91SAM9261
+ bool "AT91SAM9261 or AT91SAM9G10"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU0
+ select HAVE_FB_ATMEL
+ help
+ Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
+
+config SOC_AT91SAM9263
+ bool "AT91SAM9263"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU1
+ select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
+
+config SOC_AT91SAM9RL
+ bool "AT91SAM9RL"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU0
+ select HAVE_FB_ATMEL
+
+config SOC_AT91SAM9G45
+ bool "AT91SAM9G45 or AT91SAM9M10 families"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU1
+ select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
+ help
+ Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
+ This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+
+config SOC_AT91SAM9X5
+ bool "AT91SAM9x5 family"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU0
+ select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
+ help
+ Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
+ This means that your SAM9 name finishes with a '5' (except if it is
+ AT91SAM9G45!).
+ This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
+ and AT91SAM9X35.
+
+choice
+ prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+ bool "None"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
+ select SOC_AT91RM9200
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_DBGU0
- select HAVE_AT91_USART3
- select HAVE_AT91_USART4
- select HAVE_AT91_USART5
- select HAVE_NET_MACB
+ select SOC_AT91SAM9260
config ARCH_AT91SAM9261
bool "AT91SAM9261"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_FB_ATMEL
- select HAVE_AT91_DBGU0
+ select SOC_AT91SAM9261
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_DBGU0
- select HAVE_FB_ATMEL
+ select SOC_AT91SAM9261
config ARCH_AT91SAM9263
bool "AT91SAM9263"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU1
+ select SOC_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_USART3
- select HAVE_FB_ATMEL
- select HAVE_AT91_DBGU0
+ select SOC_AT91SAM9RL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_DBGU0
- select HAVE_AT91_USART3
- select HAVE_AT91_USART4
- select HAVE_AT91_USART5
- select HAVE_NET_MACB
+ select SOC_AT91SAM9260
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_USART3
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU1
-
-config ARCH_AT91SAM9X5
- bool "AT91SAM9x5 family"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU0
+ select SOC_AT91SAM9G45
config ARCH_AT91X40
bool "AT91x40"
+ depends on !MMU
select ARCH_USES_GETTIMEOFFSET
endchoice
@@ -364,6 +389,7 @@
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
+ <http://www.atmel.com/tools/SAM9G20-EK.aspx>
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
@@ -433,9 +459,10 @@
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
help
- Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
- "ES" at the end of the name means that this board is an
- Engineering Sample.
+ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+ Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+ families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+ <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
endif
@@ -515,41 +542,6 @@
system clock (of at least several MHz), rounding is less of a
problem so it can be safer to use a decimal values like 100.
-choice
- prompt "Select a UART for early kernel messages"
-
-config AT91_EARLY_DBGU0
- bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
- depends on HAVE_AT91_DBGU0
-
-config AT91_EARLY_DBGU1
- bool "DBGU on 9263 and 9g45"
- depends on HAVE_AT91_DBGU1
-
-config AT91_EARLY_USART0
- bool "USART0"
-
-config AT91_EARLY_USART1
- bool "USART1"
-
-config AT91_EARLY_USART2
- bool "USART2"
- depends on ! ARCH_AT91X40
-
-config AT91_EARLY_USART3
- bool "USART3"
- depends on HAVE_AT91_USART3
-
-config AT91_EARLY_USART4
- bool "USART4"
- depends on HAVE_AT91_USART4
-
-config AT91_EARLY_USART5
- bool "USART5"
- depends on HAVE_AT91_USART5
-
-endchoice
-
endmenu
endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8512e53..79d0f60 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -10,17 +10,25 @@
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam926x_time.o sam9_smc.o
# CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o sam9_smc.o
+obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91SAM9260) += at91sam9260.o
+obj-$(CONFIG_SOC_AT91SAM9261) += at91sam9261.o
+obj-$(CONFIG_SOC_AT91SAM9263) += at91sam9263.o
+obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o
+obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o
+obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o
+
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 0da66ca..c03417d 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -14,7 +14,19 @@
endif
# Keep dtb files sorted alphabetically for each SoC
+# sam9260
+dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
+# sam9263
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
# sam9g20
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
# sam9g45
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 364c193..d50da1a 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -258,18 +258,6 @@
clk_register(&pck3);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91rm9200_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 05774e5..99affb5 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1152,14 +1152,6 @@
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91rm9200_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1168,13 +1160,9 @@
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 46f7742..a27bbec 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -268,18 +268,6 @@
clk_register(&pck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9260_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 5652dde..d556de1 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -702,25 +702,8 @@
.num_resources = ARRAY_SIZE(tcb1_resources),
};
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
- { .compatible = "atmel,at91rm9200-tcb" },
- { /*sentinel*/ }
-};
-#endif
-
static void __init at91_add_device_tc(void)
{
-#if defined(CONFIG_OF)
- struct device_node *np;
-
- np = of_find_matching_node(NULL, tcb_ids);
- if (np) {
- of_node_put(np);
- return;
- }
-#endif
-
platform_device_register(&at91sam9260_tcb0_device);
platform_device_register(&at91sam9260_tcb1_device);
}
@@ -1229,14 +1212,6 @@
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9260_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1245,13 +1220,9 @@
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -1376,6 +1347,9 @@
*/
static int __init at91_add_standard_devices(void)
{
+ if (of_have_populated_dt())
+ return 0;
+
at91_add_device_rtt();
at91_add_device_watchdog();
at91_add_device_tc();
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 7de81e6..c77d503 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -239,18 +239,6 @@
clk_register(&hck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9261_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 4db961a..9295e90 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -1051,14 +1051,6 @@
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9261_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1067,13 +1059,9 @@
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index ef301be..ed91c7e 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -199,6 +199,16 @@
CLKDEV_CON_ID("pioC", &pioCDE_clk),
CLKDEV_CON_ID("pioD", &pioCDE_clk),
CLKDEV_CON_ID("pioE", &pioCDE_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+ /* more tc lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk),
+ CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -255,18 +265,6 @@
clk_register(&pck3);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9263_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index fe99206..175e000 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -953,8 +953,25 @@
.num_resources = ARRAY_SIZE(tcb_resources),
};
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+ { .compatible = "atmel,at91rm9200-tcb" },
+ { /*sentinel*/ }
+};
+#endif
+
static void __init at91_add_device_tc(void)
{
+#if defined(CONFIG_OF)
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, tcb_ids);
+ if (np) {
+ of_node_put(np);
+ return;
+ }
+#endif
+
platform_device_register(&at91sam9263_tcb_device);
}
#else
@@ -1461,14 +1478,6 @@
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9263_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1477,13 +1486,9 @@
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -1495,6 +1500,9 @@
*/
static int __init at91_add_standard_devices(void)
{
+ if (of_have_populated_dt())
+ return 0;
+
at91_add_device_rtt();
at91_add_device_watchdog();
at91_add_device_tc();
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index d222f83..f205449 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -288,18 +288,6 @@
clk_register(&pck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9g45_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 6b008ae..35bd42d 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -69,15 +69,7 @@
void __init at91_add_device_hdmac(void)
{
-#if defined(CONFIG_OF)
- struct device_node *of_node =
- of_find_node_by_name(NULL, "dma-controller");
-
- if (of_node)
- of_node_put(of_node);
- else
-#endif
- platform_device_register(&at_hdmac_device);
+ platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}
@@ -1094,25 +1086,8 @@
.num_resources = ARRAY_SIZE(tcb1_resources),
};
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
- { .compatible = "atmel,at91rm9200-tcb" },
- { /*sentinel*/ }
-};
-#endif
-
static void __init at91_add_device_tc(void)
{
-#if defined(CONFIG_OF)
- struct device_node *np;
-
- np = of_find_matching_node(NULL, tcb_ids);
- if (np) {
- of_node_put(np);
- return;
- }
-#endif
-
platform_device_register(&at91sam9g45_tcb0_device);
platform_device_register(&at91sam9g45_tcb1_device);
}
@@ -1741,14 +1716,6 @@
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1757,13 +1724,9 @@
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -1775,6 +1738,9 @@
*/
static int __init at91_add_standard_devices(void)
{
+ if (of_have_populated_dt())
+ return 0;
+
at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d9f2774..e420085 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -232,18 +232,6 @@
clk_register(&pck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9rl_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index fe4ae22..9c0b148 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -1192,14 +1192,6 @@
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1208,13 +1200,9 @@
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 2628384..271f994 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -47,20 +47,6 @@
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata onearm_eth_data = {
@@ -82,6 +68,16 @@
static void __init onearm_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&onearm_eth_data);
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 161efba..b7d8aa7 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -52,22 +52,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -183,6 +167,18 @@
static void __init afeb9260_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&afeb9260_usbh_data);
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index c6d44ee..29d3ef0 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -49,12 +49,6 @@
{
/* Initialize processor: 10 MHz crystal */
at91_initialize(10000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -175,6 +169,8 @@
static void __init cam60_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* SPI */
at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 59d9cf9..44328a6 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -44,17 +44,6 @@
{
/* Initialize processor: 20.000 MHz crystal */
at91_initialize(20000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata carmeva_eth_data = {
@@ -139,6 +128,13 @@
static void __init carmeva_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&carmeva_eth_data);
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 5f3680e..69951ec 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -52,34 +52,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART3 on ttyS4. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
-
- /* USART4 on ttyS5. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -352,6 +324,30 @@
/* NOR */
cpu9krea_add_device_nor();
/* Serial */
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART3 on ttyS4. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+ /* USART4 on ttyS5. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&cpu9krea_usbh_data);
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index e094cc8..895cf2d 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -59,28 +59,6 @@
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART2 on ttyS3 (Rx, Tx) */
- at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-
- /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata cpuat91_eth_data = {
@@ -161,6 +139,24 @@
static void __init cpuat91_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART2 on ttyS3 (Rx, Tx) */
+ at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+ /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
at91_add_device_serial();
/* LEDs. */
at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 1a1547b..cd81336 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -47,15 +47,6 @@
{
/* Initialize processor: 3.6864 MHz crystal */
at91_initialize(3686400);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
- /* DBGU on ttyS0 */
- at91_register_uart(0, 0, 0);
-
- /* make console=ttyS0 the default */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata csb337_eth_data = {
@@ -228,7 +219,11 @@
static void __init csb337_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Serial */
+ /* DBGU on ttyS0 */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&csb337_eth_data);
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index f650bf3..7c8b05a 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -44,12 +44,6 @@
{
/* Initialize processor: 3.6864 MHz crystal */
at91_initialize(3686400);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* make console=ttyS0 (ie, DBGU) the default */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata csb637_eth_data = {
@@ -118,6 +112,8 @@
/* LED(s) */
at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&csb637_eth_data);
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index c18d4d3..a1fce05 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -1,10 +1,6 @@
/*
* Setup code for AT91SAM Evaluation Kits with Device Tree support
*
- * Covers: * AT91SAM9G45-EKES board
- * * AT91SAM9M10-EKES board
- * * AT91SAM9M10G45-EK board
- *
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
*
@@ -49,9 +45,7 @@
}
static const char *at91_dt_board_compat[] __initdata = {
- "atmel,at91sam9m10g45ek",
- "atmel,at91sam9x5ek",
- "calao,usb-a9g20",
+ "atmel,at91sam9",
NULL
};
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index d302ca3..bd10172 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -44,20 +44,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART2 on ttyS2. (Rx, Tx) - IRDA */
- at91_register_uart(AT91RM9200_ID_US2, 2, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata eb9200_eth_data = {
@@ -101,6 +87,16 @@
static void __init eb9200_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART2 on ttyS2. (Rx, Tx) - IRDA */
+ at91_register_uart(AT91RM9200_ID_US2, 2, 0);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&eb9200_eth_data);
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 69966ce..89cc372 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -50,18 +50,6 @@
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata ecb_at91eth_data = {
@@ -151,7 +139,15 @@
static void __init ecb_at91board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx & Tx only) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
at91_add_device_serial();
/* Ethernet */
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index f23aabe..558546c 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -37,15 +37,6 @@
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
- /* DBGU on ttyS0. (Rx & Tx only */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata eco920_eth_data = {
@@ -103,6 +94,10 @@
static void __init eco920_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+ /* DBGU on ttyS0. (Rx & Tx only */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
at91_add_device_eth(&eco920_eth_data);
at91_add_device_usbh(&eco920_usbh_data);
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 1815152..47658f7 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -41,12 +41,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/* USB Host port */
@@ -143,6 +137,8 @@
static void __init flexibity_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&flexibity_usbh_data);
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index caf017f..33411e6 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -61,44 +61,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS
- | ATMEL_UART_RTS
- | ATMEL_UART_DTR
- | ATMEL_UART_DSR
- | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
-
- /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US3, 4,
- ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART4 on ttyS5. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-
- /* Set the internal pull-up resistor on DRXD */
- at91_set_A_periph(AT91_PIN_PB14, 1);
-
}
/*
@@ -241,6 +203,39 @@
static void __init foxg20_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS
+ | ATMEL_UART_RTS
+ | ATMEL_UART_DTR
+ | ATMEL_UART_DSR
+ | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx & Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4,
+ ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART4 on ttyS5. (Rx & Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx & Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+ /* Set the internal pull-up resistor on DRXD */
+ at91_set_A_periph(AT91_PIN_PB14, 1);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&foxg20_usbh_data);
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 230e719..3e0dfa6 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -41,38 +41,6 @@
static void __init gsia18s_init_early(void)
{
stamp9g20_init_early();
-
- /*
- * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
- * Used for Internal Analog Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS |
- ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
- /*
- * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
- * Used for GPS or WiFi or Data stream.
- */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
- * Used for External Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US2, 3,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART3 on ttyS4 (Rx, Tx, RTS).
- * Used for RS-485.
- */
- at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
-
- /*
- * USART4 on ttyS5 (Rx, Tx).
- * Used for TRX433 Radio Module.
- */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
}
/*
@@ -558,6 +526,37 @@
static void __init gsia18s_board_init(void)
{
+ /*
+ * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
+ * Used for Internal Analog Modem.
+ */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS |
+ ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+ /*
+ * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
+ * Used for GPS or WiFi or Data stream.
+ */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ /*
+ * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
+ * Used for External Modem.
+ */
+ at91_register_uart(AT91SAM9260_ID_US2, 3,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ /*
+ * USART3 on ttyS4 (Rx, Tx, RTS).
+ * Used for RS-485.
+ */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
+
+ /*
+ * USART4 on ttyS5 (Rx, Tx).
+ * Used for TRX433 Radio Module.
+ */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_udc(&udc_data);
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index efde1b2..f260657 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -47,18 +47,6 @@
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata kafa_eth_data = {
@@ -79,7 +67,15 @@
static void __init kafa_board_init(void)
{
+ /* Set up the LEDs */
+ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&kafa_eth_data);
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 59b92aa..ba39db5 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -50,24 +50,6 @@
/* Initialize processor: 10 MHz crystal */
at91_initialize(10000000);
-
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
- /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
- at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
- /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata kb9202_eth_data = {
@@ -115,7 +97,21 @@
static void __init kb9202_board_init(void)
{
+ /* Set up the LEDs */
+ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx & Tx only) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+ /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+ /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&kb9202_eth_data);
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 57d5f6a..d2f4cc1 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -55,15 +55,6 @@
{
/* Initialize processor: 20 MHz crystal */
at91_initialize(20000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -341,6 +332,11 @@
static void __init neocore926_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index b4a12fc..7fe6383 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -40,17 +40,6 @@
static void __init pcontrol_g20_init_early(void)
{
stamp9g20_init_early();
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
- at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
}
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
@@ -199,6 +188,16 @@
static void __init pcontrol_g20_board_init(void)
{
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
+ at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_eth(&macb_data);
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 59e35dd..b45c0a5 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -48,17 +48,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata picotux200_eth_data = {
@@ -106,6 +95,13 @@
static void __init picotux200_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&picotux200_eth_data);
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index b6ed5ed..0c61bf0 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -52,24 +52,6 @@
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS1 (ie, USART0) */
- at91_set_serial_console(1);
-
}
/*
@@ -235,6 +217,19 @@
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 01332aa..afd7a47 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -50,20 +50,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata dk_eth_data = {
@@ -190,7 +176,17 @@
static void __init dk_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&dk_eth_data);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index b2e4fe2..2b15b8a 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -50,20 +50,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata ek_eth_data = {
@@ -161,7 +147,17 @@
static void __init ek_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&ek_eth_data);
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index af0750f..24ab9be 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -35,26 +35,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- /* This one is for debugging */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- /* Dialin/-out modem interface */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART3 on ttyS4. (Rx, Tx, RTS) */
- /* RS485 communication */
- at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -204,7 +184,23 @@
*/
static void __init rsi_ews_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ /* This one is for debugging */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ /* Dialin/-out modem interface */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS) */
+ /* RS485 communication */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
at91_add_device_serial();
at91_set_gpio_output(AT91_PIN_PA21, 0);
/* Ethernet */
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index e8b116b..cdd21f2 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -48,23 +48,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -184,7 +167,20 @@
static void __init ek_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index d5aec55..7b3c391 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -54,20 +54,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -320,6 +306,16 @@
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 065fed3..2736453 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -58,15 +58,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -577,7 +568,12 @@
static void __init ek_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2ffe50f..983cb98 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -57,15 +57,6 @@
{
/* Initialize processor: 16.367 MHz crystal */
at91_initialize(16367660);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -412,6 +403,11 @@
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 8923ec9..3d61553 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -65,20 +65,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -372,6 +358,16 @@
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index c88e908..9a87f0b0 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -53,16 +53,6 @@
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 not connected on the -EK board */
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -457,6 +447,12 @@
static void __init ek_board_init(void)
{
/* Serial */
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 not connected on the -EK board */
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b109ce2..be3239f 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -42,15 +42,6 @@
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -296,6 +287,11 @@
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS */
at91_add_device_usba(&ek_usba_udc_data);
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index ebc9d01..9d446f1b 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -43,16 +43,6 @@
static void __init snapper9260_init_early(void)
{
at91_initialize(18432000);
-
- /* Debug on ttyS0 */
- at91_register_uart(0, 0, 0);
- at91_set_serial_console(0);
-
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
}
static struct at91_usbh_data __initdata snapper9260_usbh_data = {
@@ -168,6 +158,14 @@
snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
+ /* Debug on ttyS0 */
+ at91_register_uart(0, 0, 0);
+
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
at91_add_device_serial();
at91_add_device_usbh(&snapper9260_usbh_data);
at91_add_device_udc(&snapper9260_udc_data);
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 7640049..ee86f9d 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -36,44 +36,6 @@
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init stamp9g20evb_init_early(void)
-{
- stamp9g20_init_early();
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-}
-
-static void __init portuxg20_init_early(void)
-{
- stamp9g20_init_early();
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART4 on ttyS5. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
}
/*
@@ -254,6 +216,8 @@
void __init stamp9g20_board_init(void)
{
/* Serial */
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* NAND */
add_device_nand();
@@ -269,6 +233,22 @@
static void __init portuxg20_board_init(void)
{
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART4 on ttyS5. (Rx, Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx, Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
stamp9g20_board_init();
/* USB Host */
at91_add_device_usbh(&usbh_data);
@@ -286,6 +266,10 @@
static void __init stamp9g20evb_board_init(void)
{
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
stamp9g20_board_init();
/* USB Host */
at91_add_device_usbh(&usbh_data);
@@ -303,7 +287,7 @@
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
- .init_early = portuxg20_init_early,
+ .init_early = stamp9g20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = portuxg20_board_init,
MACHINE_END
@@ -312,7 +296,7 @@
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
- .init_early = stamp9g20evb_init_early,
+ .init_early = stamp9g20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = stamp9g20evb_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index b7483a3..95393fc 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -53,12 +53,6 @@
{
/* Initialize processor: 12.00 MHz crystal */
at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -178,6 +172,10 @@
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_128K,
}, {
+ .name = "oftree",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K,
+ }, {
.name = "kernel",
.offset = MTDPART_OFS_NXTBLK,
.size = 4 * SZ_1M,
@@ -325,6 +323,8 @@
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 38dd279..d56665e 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -58,26 +58,6 @@
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
- at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART0 on ttyS2. (Rx & Tx only to JP3) */
- at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
- /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -560,7 +540,23 @@
static void __init yl9200_board_init(void)
{
+ /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART0 on ttyS2. (Rx & Tx only to JP3) */
+ at91_register_uart(AT91RM9200_ID_US0, 2, 0);
+
+ /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&yl9200_eth_data);
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index ece1f9a..0c63815 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -21,6 +21,7 @@
#include <linux/export.h>
#include <asm/proc-fns.h>
#include <asm/cpuidle.h>
+#include <mach/cpu.h>
#include "pm.h"
@@ -33,7 +34,12 @@
struct cpuidle_driver *drv,
int index)
{
- at91_standby();
+ if (cpu_is_at91rm9200())
+ at91rm9200_standby();
+ else if (cpu_is_at91sam9g45())
+ at91sam9g45_standby();
+ else
+ at91sam9_standby();
return index;
}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index dd9b346..0a60bf8 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -40,17 +40,6 @@
extern struct sys_timer at91x40_timer;
/* Clocks */
-/*
- * function to specify the clock of the default console. As we do not
- * use the device/driver bus, the dev_name is not intialize. So we need
- * to link the clock to a specific con_id only "usart"
- */
-extern void __init at91rm9200_set_console_clock(int id);
-extern void __init at91sam9260_set_console_clock(int id);
-extern void __init at91sam9261_set_console_clock(int id);
-extern void __init at91sam9263_set_console_clock(int id);
-extern void __init at91sam9rl_set_console_clock(int id);
-extern void __init at91sam9g45_set_console_clock(int id);
#ifdef CONFIG_AT91_PMC_UNIT
extern int __init at91_clock_init(unsigned long main_clock);
extern int __init at91_dt_clock_init(void);
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 603e6aa..e67317c 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -88,11 +88,6 @@
#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */
#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */
-#define AT91_USART0 AT91RM9200_BASE_US0
-#define AT91_USART1 AT91RM9200_BASE_US1
-#define AT91_USART2 AT91RM9200_BASE_US2
-#define AT91_USART3 AT91RM9200_BASE_US3
-
/*
* Internal Memory.
*/
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 08ae9af..416c7b6 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -95,13 +95,6 @@
#define AT91SAM9260_BASE_WDT 0xfffffd40
#define AT91SAM9260_BASE_GPBR 0xfffffd50
-#define AT91_USART0 AT91SAM9260_BASE_US0
-#define AT91_USART1 AT91SAM9260_BASE_US1
-#define AT91_USART2 AT91SAM9260_BASE_US2
-#define AT91_USART3 AT91SAM9260_BASE_US3
-#define AT91_USART4 AT91SAM9260_BASE_US4
-#define AT91_USART5 AT91SAM9260_BASE_US5
-
/*
* Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 44fbdc1..a041406 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -79,10 +79,6 @@
#define AT91SAM9261_BASE_WDT 0xfffffd40
#define AT91SAM9261_BASE_GPBR 0xfffffd50
-#define AT91_USART0 AT91SAM9261_BASE_US0
-#define AT91_USART1 AT91SAM9261_BASE_US1
-#define AT91_USART2 AT91SAM9261_BASE_US2
-
/*
* Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index d96cbb2..d201029 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -95,10 +95,6 @@
#define AT91SAM9263_BASE_RTT1 0xfffffd50
#define AT91SAM9263_BASE_GPBR 0xfffffd60
-#define AT91_USART0 AT91SAM9263_BASE_US0
-#define AT91_USART1 AT91SAM9263_BASE_US1
-#define AT91_USART2 AT91SAM9263_BASE_US2
-
#define AT91_SMC AT91_SMC0
/*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index d052abc..3a4da24 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -106,11 +106,6 @@
#define AT91SAM9G45_BASE_RTC 0xfffffdb0
#define AT91SAM9G45_BASE_GPBR 0xfffffd60
-#define AT91_USART0 AT91SAM9G45_BASE_US0
-#define AT91_USART1 AT91SAM9G45_BASE_US1
-#define AT91_USART2 AT91SAM9G45_BASE_US2
-#define AT91_USART3 AT91SAM9G45_BASE_US3
-
/*
* Internal Memory.
*/
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index e0073eb..a15db56 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -89,11 +89,6 @@
#define AT91SAM9RL_BASE_GPBR 0xfffffd60
#define AT91SAM9RL_BASE_RTC 0xfffffe00
-#define AT91_USART0 AT91SAM9RL_BASE_US0
-#define AT91_USART1 AT91SAM9RL_BASE_US1
-#define AT91_USART2 AT91SAM9RL_BASE_US2
-#define AT91_USART3 AT91SAM9RL_BASE_US3
-
/*
* Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index 88e43d5..c75ee19 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,14 +55,6 @@
#define AT91SAM9X5_BASE_USART2 0xf8024000
/*
- * Base addresses for early serial code (uncompress.h)
- */
-#define AT91_DBGU AT91_BASE_DBGU0
-#define AT91_USART0 AT91SAM9X5_BASE_USART0
-#define AT91_USART1 AT91SAM9X5_BASE_USART1
-#define AT91_USART2 AT91SAM9X5_BASE_USART2
-
-/*
* Internal Memory.
*/
#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 49a8211..369afc2 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -121,7 +121,6 @@
#define ATMEL_UART_RI 0x20
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
extern struct platform_device *atmel_default_console_device;
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 0118c33..73d2fd2 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -54,6 +54,7 @@
#define ARCH_REVISON_9200_BGA (0 << 0)
#define ARCH_REVISON_9200_PQFP (1 << 0)
+#ifndef __ASSEMBLY__
enum at91_soc_type {
/* 920T */
AT91_SOC_RM9200,
@@ -106,7 +107,7 @@
return at91_soc_initdata.type != AT91_SOC_NONE;
}
-#ifdef CONFIG_ARCH_AT91RM9200
+#ifdef CONFIG_SOC_AT91RM9200
#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200)
#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
@@ -116,45 +117,37 @@
#define cpu_is_at91rm9200_pqfp() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9260
+#ifdef CONFIG_SOC_AT91SAM9260
#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260)
+#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20)
#else
#define cpu_is_at91sam9xe() (0)
#define cpu_is_at91sam9260() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20)
-#else
#define cpu_is_at91sam9g20() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9261
+#ifdef CONFIG_SOC_AT91SAM9261
#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261)
-#else
-#define cpu_is_at91sam9261() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G10
#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10)
#else
+#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9g10() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263)
#else
#define cpu_is_at91sam9263() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9RL
+#ifdef CONFIG_SOC_AT91SAM9RL
#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL)
#else
#define cpu_is_at91sam9rl() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9G45
+#ifdef CONFIG_SOC_AT91SAM9G45
#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45)
#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
@@ -168,7 +161,7 @@
#define cpu_is_at91sam9m11() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9X5
+#ifdef CONFIG_SOC_AT91SAM9X5
#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5)
#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
@@ -189,5 +182,6 @@
* definitions may reduce clutter in common drivers.
*/
#define cpu_is_at32ap7000() (0)
+#endif /* __ASSEMBLY__ */
#endif /* __MACH_CPU_H__ */
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index e9e29a6..3a01f8f 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -22,27 +22,17 @@
/* 9263, 9g45 */
#define AT91_BASE_DBGU1 0xffffee00
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <mach/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-#include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
-#include <mach/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-#include <mach/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-#include <mach/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-#include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91SAM9X5)
-#include <mach/at91sam9x5.h>
-#elif defined(CONFIG_ARCH_AT91X40)
+#if defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
#else
-#error "Unsupported AT91 processor"
-#endif
+#include <mach/at91rm9200.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91sam9x5.h>
-#if !defined(CONFIG_ARCH_AT91X40)
/*
* On all at91 except rm9200 and x40 have the System Controller starts
* at address 0xffffc000 and has a size of 16KiB.
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 4218647..6f6118d 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -1,7 +1,8 @@
/*
* arch/arm/mach-at91/include/mach/uncompress.h
*
- * Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,22 +26,147 @@
#include <linux/atmel_serial.h>
#include <mach/hardware.h>
-#if defined(CONFIG_AT91_EARLY_DBGU0)
-#define UART_OFFSET AT91_BASE_DBGU0
-#elif defined(CONFIG_AT91_EARLY_DBGU1)
-#define UART_OFFSET AT91_BASE_DBGU1
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
+#include <mach/at91_dbgu.h>
+#include <mach/cpu.h>
+
+void __iomem *at91_uart;
+
+#if !defined(CONFIG_ARCH_AT91X40)
+static const u32 uarts_rm9200[] = {
+ AT91_BASE_DBGU0,
+ AT91RM9200_BASE_US0,
+ AT91RM9200_BASE_US1,
+ AT91RM9200_BASE_US2,
+ AT91RM9200_BASE_US3,
+ 0,
+};
+
+static const u32 uarts_sam9260[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9260_BASE_US0,
+ AT91SAM9260_BASE_US1,
+ AT91SAM9260_BASE_US2,
+ AT91SAM9260_BASE_US3,
+ AT91SAM9260_BASE_US4,
+ AT91SAM9260_BASE_US5,
+ 0,
+};
+
+static const u32 uarts_sam9261[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9261_BASE_US0,
+ AT91SAM9261_BASE_US1,
+ AT91SAM9261_BASE_US2,
+ 0,
+};
+
+static const u32 uarts_sam9263[] = {
+ AT91_BASE_DBGU1,
+ AT91SAM9263_BASE_US0,
+ AT91SAM9263_BASE_US1,
+ AT91SAM9263_BASE_US2,
+ 0,
+};
+
+static const u32 uarts_sam9g45[] = {
+ AT91_BASE_DBGU1,
+ AT91SAM9G45_BASE_US0,
+ AT91SAM9G45_BASE_US1,
+ AT91SAM9G45_BASE_US2,
+ AT91SAM9G45_BASE_US3,
+ 0,
+};
+
+static const u32 uarts_sam9rl[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9RL_BASE_US0,
+ AT91SAM9RL_BASE_US1,
+ AT91SAM9RL_BASE_US2,
+ AT91SAM9RL_BASE_US3,
+ 0,
+};
+
+static const u32 uarts_sam9x5[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9X5_BASE_USART0,
+ AT91SAM9X5_BASE_USART1,
+ AT91SAM9X5_BASE_USART2,
+ 0,
+};
+
+static inline const u32* decomp_soc_detect(u32 dbgu_base)
+{
+ u32 cidr, socid;
+
+ cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
+ socid = cidr & ~AT91_CIDR_VERSION;
+
+ switch (socid) {
+ case ARCH_ID_AT91RM9200:
+ return uarts_rm9200;
+
+ case ARCH_ID_AT91SAM9G20:
+ case ARCH_ID_AT91SAM9260:
+ return uarts_sam9260;
+
+ case ARCH_ID_AT91SAM9261:
+ return uarts_sam9261;
+
+ case ARCH_ID_AT91SAM9263:
+ return uarts_sam9263;
+
+ case ARCH_ID_AT91SAM9G45:
+ return uarts_sam9g45;
+
+ case ARCH_ID_AT91SAM9RL64:
+ return uarts_sam9rl;
+
+ case ARCH_ID_AT91SAM9X5:
+ return uarts_sam9x5;
+ }
+
+ /* at91sam9g10 */
+ if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+ return uarts_sam9261;
+ }
+ /* at91sam9xe */
+ else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
+ return uarts_sam9260;
+ }
+
+ return NULL;
+}
+
+static inline void arch_decomp_setup(void)
+{
+ int i = 0;
+ const u32* usarts;
+
+ usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+
+ if (!usarts)
+ usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+ if (!usarts) {
+ at91_uart = NULL;
+ return;
+ }
+
+ do {
+ /* physical address */
+ at91_uart = (void __iomem *)usarts[i];
+
+ if (__raw_readl(at91_uart + ATMEL_US_BRGR))
+ return;
+ i++;
+ } while (usarts[i]);
+
+ at91_uart = NULL;
+}
+#else
+static inline void arch_decomp_setup(void)
+{
+ at91_uart = NULL;
+}
#endif
/*
@@ -52,28 +178,24 @@
*/
static void putc(int c)
{
-#ifdef UART_OFFSET
- void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+ if (!at91_uart)
+ return;
- while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+ while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY))
barrier();
- __raw_writel(c, sys + ATMEL_US_THR);
-#endif
+ __raw_writel(c, at91_uart + ATMEL_US_THR);
}
static inline void flush(void)
{
-#ifdef UART_OFFSET
- void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+ if (!at91_uart)
+ return;
/* wait for transmission to complete */
- while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+ while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
barrier();
-#endif
}
-#define arch_decomp_setup()
-
#define arch_decomp_wdog()
#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index f630250..1bfaad6 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -261,7 +261,12 @@
* For ARM 926 based chips, this requirement is weaker
* as at91sam9 can access a RAM in self-refresh mode.
*/
- at91_standby();
+ if (cpu_is_at91rm9200())
+ at91rm9200_standby();
+ else if (cpu_is_at91sam9g45())
+ at91sam9g45_standby();
+ else
+ at91sam9_standby();
break;
case PM_SUSPEND_ON:
@@ -307,10 +312,9 @@
pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
-#ifdef CONFIG_ARCH_AT91RM9200
/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
- at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
-#endif
+ if (cpu_is_at91rm9200())
+ at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
suspend_set_ops(&at91_pm_ops);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 89f56f3..38f467c 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
#define __ARCH_ARM_MACH_AT91_PM
#include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91RM9200
#include <mach/at91rm9200_sdramc.h>
/*
@@ -43,10 +42,6 @@
"r" (lpr));
}
-#define at91_standby at91rm9200_standby
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
* remember.
*/
@@ -75,11 +70,7 @@
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
-#define at91_standby at91sam9g45_standby
-
-#else
-
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
/*
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
@@ -102,8 +93,4 @@
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
}
-#define at91_standby at91sam9_standby
-
-#endif
-
#endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index db54521..098c28d 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -18,7 +18,7 @@
#include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
/*
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 5db4aa4..683dddf 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -26,30 +26,30 @@
return at91_boot_soc.init != NULL;
}
-#if !defined(CONFIG_ARCH_AT91RM9200)
+#if !defined(CONFIG_SOC_AT91RM9200)
#define at91rm9200_soc at91_boot_soc
#endif
-#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20))
+#if !defined(CONFIG_SOC_AT91SAM9260)
#define at91sam9260_soc at91_boot_soc
#endif
-#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10))
+#if !defined(CONFIG_SOC_AT91SAM9261)
#define at91sam9261_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9263)
+#if !defined(CONFIG_SOC_AT91SAM9263)
#define at91sam9263_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9G45)
+#if !defined(CONFIG_SOC_AT91SAM9G45)
#define at91sam9g45_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9RL)
+#if !defined(CONFIG_SOC_AT91SAM9RL)
#define at91sam9rl_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9X5)
+#if !defined(CONFIG_SOC_AT91SAM9X5)
#define at91sam9x5_soc at91_boot_soc
#endif
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
index 75946ac..e0b3eee 100644
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -29,30 +29,4 @@
endmenu
-menu "LPC32XX chip components"
-
-config ARCH_LPC32XX_IRAM_FOR_NET
- bool "Use IRAM for network buffers"
- default y
- help
- Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as
- network buffer. If the total combined required buffer sizes is
- larger than the size of IRAM, then SDRAM will be used instead.
-
- This can be enabled safely if the IRAM is not intended for other
- uses.
-
-config ARCH_LPC32XX_MII_SUPPORT
- bool "Check to enable MII support or leave disabled for RMII support"
- help
- Say Y here to enable MII support, or N for RMII support. Regardless of
- which support is selected, the ethernet interface driver needs to be
- selected in the device driver networking section.
-
- The PHY3250 reference board uses RMII, so users of this board should
- say N.
-
-endmenu
-
endif
-
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index 2fc24ca..f6a3ffe 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -1095,49 +1095,42 @@
}
EXPORT_SYMBOL(clk_get_parent);
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = (d), \
- .con_id = (n), \
- .clk = &(c), \
- },
-
static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
- _REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
- _REGISTER_CLOCK(NULL, "osc_main", osc_main)
- _REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
- _REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
- _REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
- _REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
- _REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
- _REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
- _REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
- _REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
- _REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
- _REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
- _REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
- _REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
- _REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
- _REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
- _REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
- _REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
- _REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
- _REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
- _REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
- _REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
- _REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
- _REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
- _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
- _REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
- _REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
- _REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
- _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
- _REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc)
- _REGISTER_CLOCK("lpc-eth.0", NULL, clk_net)
- _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
- _REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
- _REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
+ CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz),
+ CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397),
+ CLKDEV_INIT(NULL, "osc_main", &osc_main),
+ CLKDEV_INIT(NULL, "sys_ck", &clk_sys),
+ CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll),
+ CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll),
+ CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk),
+ CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk),
+ CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0),
+ CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1),
+ CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2),
+ CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3),
+ CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9),
+ CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
+ CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
+ CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
+ CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
+ CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),
+ CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6),
+ CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0),
+ CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1),
+ CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
+ CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
+ CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
+ CLKDEV_INIT("lpc32xx_keys.0", NULL, &clk_kscan),
+ CLKDEV_INIT("lpc32xx-nand.0", "nand_ck", &clk_nand),
+ CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
+ CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
+ CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
+ CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc),
+ CLKDEV_INIT("20098000.sd", NULL, &clk_mmc),
+ CLKDEV_INIT("31060000.ethernet", NULL, &clk_net),
+ CLKDEV_INIT("dev:clcd", NULL, &clk_lcd),
+ CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd),
+ CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc),
};
static int __init clk_init(void)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index bbbf063..5c96057 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -27,186 +27,11 @@
#include <asm/mach/map.h>
-#include <mach/i2c.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include "common.h"
/*
- * Watchdog timer
- */
-static struct resource watchdog_resources[] = {
- [0] = {
- .start = LPC32XX_WDTIM_BASE,
- .end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device lpc32xx_watchdog_device = {
- .name = "pnx4008-watchdog",
- .id = -1,
- .num_resources = ARRAY_SIZE(watchdog_resources),
- .resource = watchdog_resources,
-};
-
-/*
- * I2C busses
- */
-static struct i2c_pnx_data i2c0_data = {
- .name = I2C_CHIP_NAME "1",
- .base = LPC32XX_I2C1_BASE,
- .irq = IRQ_LPC32XX_I2C_1,
-};
-
-static struct i2c_pnx_data i2c1_data = {
- .name = I2C_CHIP_NAME "2",
- .base = LPC32XX_I2C2_BASE,
- .irq = IRQ_LPC32XX_I2C_2,
-};
-
-static struct i2c_pnx_data i2c2_data = {
- .name = "USB-I2C",
- .base = LPC32XX_OTG_I2C_BASE,
- .irq = IRQ_LPC32XX_USB_I2C,
-};
-
-struct platform_device lpc32xx_i2c0_device = {
- .name = "pnx-i2c",
- .id = 0,
- .dev = {
- .platform_data = &i2c0_data,
- },
-};
-
-struct platform_device lpc32xx_i2c1_device = {
- .name = "pnx-i2c",
- .id = 1,
- .dev = {
- .platform_data = &i2c1_data,
- },
-};
-
-struct platform_device lpc32xx_i2c2_device = {
- .name = "pnx-i2c",
- .id = 2,
- .dev = {
- .platform_data = &i2c2_data,
- },
-};
-
-/* TSC (Touch Screen Controller) */
-
-static struct resource lpc32xx_tsc_resources[] = {
- {
- .start = LPC32XX_ADC_BASE,
- .end = LPC32XX_ADC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_LPC32XX_TS_IRQ,
- .end = IRQ_LPC32XX_TS_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device lpc32xx_tsc_device = {
- .name = "ts-lpc32xx",
- .id = -1,
- .num_resources = ARRAY_SIZE(lpc32xx_tsc_resources),
- .resource = lpc32xx_tsc_resources,
-};
-
-/* RTC */
-
-static struct resource lpc32xx_rtc_resources[] = {
- {
- .start = LPC32XX_RTC_BASE,
- .end = LPC32XX_RTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },{
- .start = IRQ_LPC32XX_RTC,
- .end = IRQ_LPC32XX_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device lpc32xx_rtc_device = {
- .name = "rtc-lpc32xx",
- .id = -1,
- .num_resources = ARRAY_SIZE(lpc32xx_rtc_resources),
- .resource = lpc32xx_rtc_resources,
-};
-
-/*
- * ADC support
- */
-static struct resource adc_resources[] = {
- {
- .start = LPC32XX_ADC_BASE,
- .end = LPC32XX_ADC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_LPC32XX_TS_IRQ,
- .end = IRQ_LPC32XX_TS_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device lpc32xx_adc_device = {
- .name = "lpc32xx-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(adc_resources),
- .resource = adc_resources,
-};
-
-/*
- * USB support
- */
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-static struct resource ohci_resources[] = {
- {
- .start = IO_ADDRESS(LPC32XX_USB_BASE),
- .end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_LPC32XX_USB_HOST,
- .flags = IORESOURCE_IRQ,
- },
-};
-struct platform_device lpc32xx_ohci_device = {
- .name = "usb-ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xFFFFFFFF,
- },
- .num_resources = ARRAY_SIZE(ohci_resources),
- .resource = ohci_resources,
-};
-
-/*
- * Network Support
- */
-static struct resource net_resources[] = {
- [0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
- [1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
- [2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
-};
-
-static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
-struct platform_device lpc32xx_net_device = {
- .name = "lpc-eth",
- .id = 0,
- .dev = {
- .dma_mask = &lpc32xx_mac_dma_mask,
- .coherent_dma_mask = 0xffffffffUL,
- },
- .num_resources = ARRAY_SIZE(net_resources),
- .resource = net_resources,
-};
-
-/*
* Returns the unique ID for the device
*/
void lpc32xx_get_uid(u32 devid[4])
@@ -398,3 +223,16 @@
while (1)
;
}
+
+static int __init lpc32xx_display_uid(void)
+{
+ u32 uid[4];
+
+ lpc32xx_get_uid(uid);
+
+ printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
+ uid[3], uid[2], uid[1], uid[0]);
+
+ return 1;
+}
+arch_initcall(lpc32xx_display_uid);
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 68e45e8..afeac3b 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -23,26 +23,12 @@
#include <linux/platform_device.h>
/*
- * Arch specific platform device structures
- */
-extern struct platform_device lpc32xx_watchdog_device;
-extern struct platform_device lpc32xx_i2c0_device;
-extern struct platform_device lpc32xx_i2c1_device;
-extern struct platform_device lpc32xx_i2c2_device;
-extern struct platform_device lpc32xx_tsc_device;
-extern struct platform_device lpc32xx_adc_device;
-extern struct platform_device lpc32xx_rtc_device;
-extern struct platform_device lpc32xx_ohci_device;
-extern struct platform_device lpc32xx_net_device;
-
-/*
* Other arch specific structures and functions
*/
extern struct sys_timer lpc32xx_timer;
extern void __init lpc32xx_init_irq(void);
extern void __init lpc32xx_map_io(void);
extern void __init lpc32xx_serial_init(void);
-extern void __init lpc32xx_gpio_init(void);
extern void lpc23xx_restart(char, const char *);
diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h
deleted file mode 100644
index 034dc92..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/i2c.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-enum {
- mstatus_tdi = 0x00000001,
- mstatus_afi = 0x00000002,
- mstatus_nai = 0x00000004,
- mstatus_drmi = 0x00000008,
- mstatus_active = 0x00000020,
- mstatus_scl = 0x00000040,
- mstatus_sda = 0x00000080,
- mstatus_rff = 0x00000100,
- mstatus_rfe = 0x00000200,
- mstatus_tff = 0x00000400,
- mstatus_tfe = 0x00000800,
-};
-
-enum {
- mcntrl_tdie = 0x00000001,
- mcntrl_afie = 0x00000002,
- mcntrl_naie = 0x00000004,
- mcntrl_drmie = 0x00000008,
- mcntrl_daie = 0x00000020,
- mcntrl_rffie = 0x00000040,
- mcntrl_tffie = 0x00000080,
- mcntrl_reset = 0x00000100,
- mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
- rw_bit = 1 << 0,
- start_bit = 1 << 8,
- stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
-#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
-#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
-#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
-#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
-#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
-
-#define I2C_CHIP_NAME "PNX4008-I2C"
-
-#endif /* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index d080cb1..5b1cc35 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -22,6 +22,11 @@
#include <linux/irq.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
@@ -44,6 +49,9 @@
#define SIC1_ATR_DEFAULT 0x00026000
#define SIC2_ATR_DEFAULT 0x00000000
+static struct irq_domain *lpc32xx_mic_domain;
+static struct device_node *lpc32xx_mic_np;
+
struct lpc32xx_event_group_regs {
void __iomem *enab_reg;
void __iomem *edge_reg;
@@ -203,7 +211,7 @@
{
unsigned int reg, ctrl, mask;
- get_controller(d->irq, &ctrl, &mask);
+ get_controller(d->hwirq, &ctrl, &mask);
reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
@@ -213,7 +221,7 @@
{
unsigned int reg, ctrl, mask;
- get_controller(d->irq, &ctrl, &mask);
+ get_controller(d->hwirq, &ctrl, &mask);
reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
@@ -223,14 +231,14 @@
{
unsigned int ctrl, mask;
- get_controller(d->irq, &ctrl, &mask);
+ get_controller(d->hwirq, &ctrl, &mask);
__raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
/* Also need to clear pending wake event */
- if (lpc32xx_events[d->irq].mask != 0)
- __raw_writel(lpc32xx_events[d->irq].mask,
- lpc32xx_events[d->irq].event_group->rawstat_reg);
+ if (lpc32xx_events[d->hwirq].mask != 0)
+ __raw_writel(lpc32xx_events[d->hwirq].mask,
+ lpc32xx_events[d->hwirq].event_group->rawstat_reg);
}
static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
@@ -274,22 +282,22 @@
switch (type) {
case IRQ_TYPE_EDGE_RISING:
/* Rising edge sensitive */
- __lpc32xx_set_irq_type(d->irq, 1, 1);
+ __lpc32xx_set_irq_type(d->hwirq, 1, 1);
break;
case IRQ_TYPE_EDGE_FALLING:
/* Falling edge sensitive */
- __lpc32xx_set_irq_type(d->irq, 0, 1);
+ __lpc32xx_set_irq_type(d->hwirq, 0, 1);
break;
case IRQ_TYPE_LEVEL_LOW:
/* Low level sensitive */
- __lpc32xx_set_irq_type(d->irq, 0, 0);
+ __lpc32xx_set_irq_type(d->hwirq, 0, 0);
break;
case IRQ_TYPE_LEVEL_HIGH:
/* High level sensitive */
- __lpc32xx_set_irq_type(d->irq, 1, 0);
+ __lpc32xx_set_irq_type(d->hwirq, 1, 0);
break;
/* Other modes are not supported */
@@ -298,7 +306,7 @@
}
/* Ok to use the level handler for all types */
- irq_set_handler(d->irq, handle_level_irq);
+ irq_set_handler(d->hwirq, handle_level_irq);
return 0;
}
@@ -307,33 +315,33 @@
{
unsigned long eventreg;
- if (lpc32xx_events[d->irq].mask != 0) {
- eventreg = __raw_readl(lpc32xx_events[d->irq].
+ if (lpc32xx_events[d->hwirq].mask != 0) {
+ eventreg = __raw_readl(lpc32xx_events[d->hwirq].
event_group->enab_reg);
if (state)
- eventreg |= lpc32xx_events[d->irq].mask;
+ eventreg |= lpc32xx_events[d->hwirq].mask;
else {
- eventreg &= ~lpc32xx_events[d->irq].mask;
+ eventreg &= ~lpc32xx_events[d->hwirq].mask;
/*
* When disabling the wakeup, clear the latched
* event
*/
- __raw_writel(lpc32xx_events[d->irq].mask,
- lpc32xx_events[d->irq].
+ __raw_writel(lpc32xx_events[d->hwirq].mask,
+ lpc32xx_events[d->hwirq].
event_group->rawstat_reg);
}
__raw_writel(eventreg,
- lpc32xx_events[d->irq].event_group->enab_reg);
+ lpc32xx_events[d->hwirq].event_group->enab_reg);
return 0;
}
/* Clear event */
- __raw_writel(lpc32xx_events[d->irq].mask,
- lpc32xx_events[d->irq].event_group->rawstat_reg);
+ __raw_writel(lpc32xx_events[d->hwirq].mask,
+ lpc32xx_events[d->hwirq].event_group->rawstat_reg);
return -ENODEV;
}
@@ -353,6 +361,7 @@
}
static struct irq_chip lpc32xx_irq_chip = {
+ .name = "MIC",
.irq_ack = lpc32xx_ack_irq,
.irq_mask = lpc32xx_mask_irq,
.irq_unmask = lpc32xx_unmask_irq,
@@ -386,9 +395,23 @@
}
}
+static int __init __lpc32xx_mic_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ lpc32xx_mic_np = node;
+
+ return 0;
+}
+
+static const struct of_device_id mic_of_match[] __initconst = {
+ { .compatible = "nxp,lpc3220-mic", .data = __lpc32xx_mic_of_init },
+ { }
+};
+
void __init lpc32xx_init_irq(void)
{
unsigned int i;
+ int irq_base;
/* Setup MIC */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
@@ -448,4 +471,19 @@
LPC32XX_CLKPWR_PIN_RS);
__raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
LPC32XX_CLKPWR_INT_RS);
+
+ of_irq_init(mic_of_match);
+
+ irq_base = irq_alloc_descs(-1, 0, NR_IRQS, 0);
+ if (irq_base < 0) {
+ pr_warn("Cannot allocate irq_descs, assuming pre-allocated\n");
+ irq_base = 0;
+ }
+
+ lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS,
+ irq_base, 0,
+ &irq_domain_simple_ops,
+ NULL);
+ if (!lpc32xx_mic_domain)
+ panic("Unable to add MIC irq domain\n");
}
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 7f7401e..540106c 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -1,8 +1,9 @@
/*
- * arch/arm/mach-lpc32xx/phy3250.c
+ * Platform support for LPC32xx SoC
*
* Author: Kevin Wells <kevin.wells@nxp.com>
*
+ * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
* Copyright (C) 2010 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or modify
@@ -25,11 +26,16 @@
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
-#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl022.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/amba/pl08x.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -47,7 +53,6 @@
#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
-#define LED_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
/*
* AMBA LCD controller
@@ -150,9 +155,6 @@
.remove = lpc32xx_clcd_remove,
};
-static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
- LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
-
/*
* AMBA SSP (SPI)
*/
@@ -180,8 +182,11 @@
.enable_dma = 0,
};
-static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
- LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
+static struct pl022_ssp_controller lpc32xx_ssp1_data = {
+ .bus_id = 1,
+ .num_chipselect = 1,
+ .enable_dma = 0,
+};
/* AT25 driver registration */
static int __init phy3250_spi_board_register(void)
@@ -221,73 +226,20 @@
}
arch_initcall(phy3250_spi_board_register);
-static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
+static struct pl08x_platform_data pl08x_pd = {
};
-static struct gpio_led phy_leds[] = {
- {
- .name = "led0",
- .gpio = LED_GPIO,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
+static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data),
+ OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
+ OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
+ OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
+ { }
};
-static struct gpio_led_platform_data led_data = {
- .leds = phy_leds,
- .num_leds = ARRAY_SIZE(phy_leds),
-};
-
-static struct platform_device lpc32xx_gpio_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev.platform_data = &led_data,
-};
-
-static struct platform_device *phy3250_devs[] __initdata = {
- &lpc32xx_rtc_device,
- &lpc32xx_tsc_device,
- &lpc32xx_i2c0_device,
- &lpc32xx_i2c1_device,
- &lpc32xx_i2c2_device,
- &lpc32xx_watchdog_device,
- &lpc32xx_gpio_led_device,
- &lpc32xx_adc_device,
- &lpc32xx_ohci_device,
- &lpc32xx_net_device,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
- &lpc32xx_clcd_device,
- &lpc32xx_ssp0_device,
-};
-
-/*
- * Board specific functions
- */
-static void __init phy3250_board_init(void)
+static void __init lpc3250_machine_init(void)
{
u32 tmp;
- int i;
-
- lpc32xx_gpio_init();
-
- /* Register GPIOs used on this board */
- if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
- printk(KERN_ERR "Error requesting gpio %u",
- SPI0_CS_GPIO);
- else if (gpio_direction_output(SPI0_CS_GPIO, 1))
- printk(KERN_ERR "Error setting gpio %u to output",
- SPI0_CS_GPIO);
-
- /* Setup network interface for RMII mode */
- tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
- tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
- tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
- __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
/* Setup SLC NAND controller muxing */
__raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
@@ -300,6 +252,12 @@
tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
+ /* Set up USB power */
+ tmp = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+ tmp |= LPC32XX_CLKPWR_USBCTRL_HCLK_EN |
+ LPC32XX_CLKPWR_USBCTRL_USBI2C_EN;
+ __raw_writel(tmp, LPC32XX_CLKPWR_USB_CTRL);
+
/* Set up I2C pull levels */
tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
@@ -321,54 +279,51 @@
/*
* AMBA peripheral clocks need to be enabled prior to AMBA device
* detection or a data fault will occur, so enable the clocks
- * here. However, we don't want to enable them if the peripheral
- * isn't included in the image
+ * here.
*/
-#ifdef CONFIG_FB_ARMCLCD
tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
LPC32XX_CLKPWR_LCDCLK_CTRL);
-#endif
-#ifdef CONFIG_SPI_PL022
+
tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
LPC32XX_CLKPWR_SSP_CLK_CTRL);
-#endif
- platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
- struct amba_device *d = amba_devs[i];
- amba_device_register(d, &iomem_resource);
- }
+ tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL);
+ __raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN),
+ LPC32XX_CLKPWR_DMA_CLK_CTRL);
/* Test clock needed for UDA1380 initial init */
__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
LPC32XX_CLKPWR_TEST_CLK_SEL);
- i2c_register_board_info(0, phy3250_i2c_board_info,
- ARRAY_SIZE(phy3250_i2c_board_info));
+ of_platform_populate(NULL, of_default_bus_match_table,
+ lpc32xx_auxdata_lookup, NULL);
+
+ /* Register GPIOs used on this board */
+ if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
+ printk(KERN_ERR "Error requesting gpio %u",
+ SPI0_CS_GPIO);
+ else if (gpio_direction_output(SPI0_CS_GPIO, 1))
+ printk(KERN_ERR "Error setting gpio %u to output",
+ SPI0_CS_GPIO);
}
-static int __init lpc32xx_display_uid(void)
-{
- u32 uid[4];
+static char const *lpc32xx_dt_compat[] __initdata = {
+ "nxp,lpc3220",
+ "nxp,lpc3230",
+ "nxp,lpc3240",
+ "nxp,lpc3250",
+ NULL
+};
- lpc32xx_get_uid(uid);
-
- printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
- uid[3], uid[2], uid[1], uid[0]);
-
- return 1;
-}
-arch_initcall(lpc32xx_display_uid);
-
-MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
- /* Maintainer: Kevin Wells, NXP Semiconductors */
+DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
.atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
.timer = &lpc32xx_timer,
- .init_machine = phy3250_board_init,
+ .init_machine = lpc3250_machine_init,
+ .dt_compat = lpc32xx_dt_compat,
.restart = lpc23xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 098d183..7302ba7 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,7 +15,6 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
-#include <linux/i2c/twl.h>
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
@@ -95,22 +94,6 @@
#endif
#ifdef CONFIG_ARCH_OMAP3
-static struct twl4030_platform_data beagle_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-};
-
-static void __init omap3_i2c_init(void)
-{
- omap3_pmic_init("twl4030", &beagle_twldata);
-}
-
-static void __init omap3_init(void)
-{
- omap3_i2c_init();
- omap_generic_init();
-}
-
static const char *omap3_boards_compat[] __initdata = {
"ti,omap3",
NULL,
@@ -122,7 +105,7 @@
.init_early = omap3430_init_early,
.init_irq = omap_init_irq,
.handle_irq = omap3_intc_handle_irq,
- .init_machine = omap3_init,
+ .init_machine = omap_generic_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
.restart = omap_prcm_restart,
@@ -130,22 +113,6 @@
#endif
#ifdef CONFIG_ARCH_OMAP4
-static struct twl4030_platform_data sdp4430_twldata = {
- .irq_base = TWL6030_IRQ_BASE,
- .irq_end = TWL6030_IRQ_END,
-};
-
-static void __init omap4_i2c_init(void)
-{
- omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
-}
-
-static void __init omap4_init(void)
-{
- omap4_i2c_init();
- omap_generic_init();
-}
-
static const char *omap4_boards_compat[] __initdata = {
"ti,omap4",
NULL,
@@ -157,7 +124,7 @@
.init_early = omap4430_init_early,
.init_irq = omap_init_irq,
.handle_irq = gic_handle_irq,
- .init_machine = omap4_init,
+ .init_machine = omap_generic_init,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
.restart = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index e433603..b61c365 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -701,11 +701,14 @@
* in alphabetical order so they're easier to sort through.
*/
omap_init_audio();
- omap_init_mcpdm();
- omap_init_dmic();
omap_init_camera();
omap_init_mbox();
- omap_init_mcspi();
+ /* If dtb is there, the devices will be created dynamically */
+ if (!of_have_populated_dt()) {
+ omap_init_dmic();
+ omap_init_mcpdm();
+ omap_init_mcspi();
+ }
omap_init_pmu();
omap_hdq_init();
omap_init_sti();
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 2f994e5..18f9c7b 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -20,6 +20,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
@@ -146,7 +147,10 @@
*/
static int __init omap2_gpio_init(void)
{
- return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init,
- NULL);
+ /* If dtb is there, the devices will be created dynamically */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
+ return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL);
}
postcore_initcall(omap2_gpio_init);
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 8103f96..550cfc2 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -16,48 +16,62 @@
#include <linux/err.h>
#include <mach/platform.h>
#include <mach/irqs.h>
-#include <mach/i2c.h>
-static struct i2c_pnx_data i2c0_data = {
- .name = I2C_CHIP_NAME "0",
- .base = PNX4008_I2C1_BASE,
- .irq = I2C_1_INT,
+static struct resource i2c0_resources[] = {
+ {
+ .start = PNX4008_I2C1_BASE,
+ .end = PNX4008_I2C1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = I2C_1_INT,
+ .end = I2C_1_INT,
+ .flags = IORESOURCE_IRQ,
+ },
};
-static struct i2c_pnx_data i2c1_data = {
- .name = I2C_CHIP_NAME "1",
- .base = PNX4008_I2C2_BASE,
- .irq = I2C_2_INT,
+static struct resource i2c1_resources[] = {
+ {
+ .start = PNX4008_I2C2_BASE,
+ .end = PNX4008_I2C2_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = I2C_2_INT,
+ .end = I2C_2_INT,
+ .flags = IORESOURCE_IRQ,
+ },
};
-static struct i2c_pnx_data i2c2_data = {
- .name = "USB-I2C",
- .base = (PNX4008_USB_CONFIG_BASE + 0x300),
- .irq = USB_I2C_INT,
+static struct resource i2c2_resources[] = {
+ {
+ .start = PNX4008_USB_CONFIG_BASE + 0x300,
+ .end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = USB_I2C_INT,
+ .end = USB_I2C_INT,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device i2c0_device = {
- .name = "pnx-i2c",
+ .name = "pnx-i2c.0",
.id = 0,
- .dev = {
- .platform_data = &i2c0_data,
- },
+ .resource = i2c0_resources,
+ .num_resources = ARRAY_SIZE(i2c0_resources),
};
static struct platform_device i2c1_device = {
- .name = "pnx-i2c",
+ .name = "pnx-i2c.1",
.id = 1,
- .dev = {
- .platform_data = &i2c1_data,
- },
+ .resource = i2c1_resources,
+ .num_resources = ARRAY_SIZE(i2c1_resources),
};
static struct platform_device i2c2_device = {
- .name = "pnx-i2c",
+ .name = "pnx-i2c.2",
.id = 2,
- .dev = {
- .platform_data = &i2c2_data,
- },
+ .resource = i2c2_resources,
+ .num_resources = ARRAY_SIZE(i2c2_resources),
};
static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pnx4008/include/mach/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
deleted file mode 100644
index 259ac53..0000000
--- a/arch/arm/mach-pnx4008/include/mach/i2c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H__
-#define __ASM_ARCH_I2C_H__
-
-enum {
- mstatus_tdi = 0x00000001,
- mstatus_afi = 0x00000002,
- mstatus_nai = 0x00000004,
- mstatus_drmi = 0x00000008,
- mstatus_active = 0x00000020,
- mstatus_scl = 0x00000040,
- mstatus_sda = 0x00000080,
- mstatus_rff = 0x00000100,
- mstatus_rfe = 0x00000200,
- mstatus_tff = 0x00000400,
- mstatus_tfe = 0x00000800,
-};
-
-enum {
- mcntrl_tdie = 0x00000001,
- mcntrl_afie = 0x00000002,
- mcntrl_naie = 0x00000004,
- mcntrl_drmie = 0x00000008,
- mcntrl_daie = 0x00000020,
- mcntrl_rffie = 0x00000040,
- mcntrl_tffie = 0x00000080,
- mcntrl_reset = 0x00000100,
- mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
- rw_bit = 1 << 0,
- start_bit = 1 << 8,
- stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
-#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
-#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
-#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
-#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
-#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
-
-#define HCLK_MHZ 13
-#define I2C_CHIP_NAME "PNX4008-I2C"
-
-#endif /* __ASM_ARCH_I2C_H___ */
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 83ad3fe..cc1d735 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -3,6 +3,8 @@
extern void shmobile_earlytimer_init(void);
extern struct sys_timer shmobile_timer;
+extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
+ unsigned int mult, unsigned int div);
struct twd_local_timer;
void shmobile_twd_init(struct twd_local_timer *twd_local_timer);
extern void shmobile_setup_console(void);
diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/include/mach/intc.h
index 8b22258..a5603c7 100644
--- a/arch/arm/mach-shmobile/include/mach/intc.h
+++ b/arch/arm/mach-shmobile/include/mach/intc.h
@@ -142,6 +142,50 @@
p ## _sense_registers, p ## _ack_registers) \
}
+#define INTC_IRQ_PINS_16H(p, base, vect, str) \
+ \
+static struct resource p ## _resources[] __initdata = { \
+ [0] = { \
+ .start = base, \
+ .end = base + 0x64, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+}; \
+ \
+enum { \
+ p ## _UNUSED = 0, \
+ INTC_IRQ_PINS_ENUM_16H(p), \
+}; \
+ \
+static struct intc_vect p ## _vectors[] __initdata = { \
+ INTC_IRQ_PINS_VECT_16H(p, vect), \
+}; \
+ \
+static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
+ INTC_IRQ_PINS_MASK_16H(p, base), \
+}; \
+ \
+static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
+ INTC_IRQ_PINS_PRIO_16H(p, base), \
+}; \
+ \
+static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
+ INTC_IRQ_PINS_SENSE_16H(p, base), \
+}; \
+ \
+static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
+ INTC_IRQ_PINS_ACK_16H(p, base), \
+}; \
+ \
+static struct intc_desc p ## _desc __initdata = { \
+ .name = str, \
+ .resource = p ## _resources, \
+ .num_resources = ARRAY_SIZE(p ## _resources), \
+ .hw = INTC_HW_DESC(p ## _vectors, NULL, \
+ p ## _mask_registers, p ## _prio_registers, \
+ p ## _sense_registers, p ## _ack_registers) \
+}
+
#define INTC_IRQ_PINS_32(p, base, vect, str) \
\
static struct resource p ## _resources[] __initdata = { \
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index 4e686cc2..06a5da3 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -7,7 +7,7 @@
#define gic_spi(nr) ((nr) + 32)
/* INTCS */
-#define INTCS_VECT_BASE 0x2200
+#define INTCS_VECT_BASE 0x3400
#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 6447e0a..2587a22 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
@@ -305,14 +306,16 @@
intca_mask_registers, intca_prio_registers,
NULL);
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
- INTC_VECT, "sh7372-intca-irq-pins");
+INTC_IRQ_PINS_16(intca_irq_pins_lo, 0xe6900000,
+ INTC_VECT, "sh7372-intca-irq-lo");
+
+INTC_IRQ_PINS_16H(intca_irq_pins_hi, 0xe6900000,
+ INTC_VECT, "sh7372-intca-irq-hi");
+
enum {
UNUSED_INTCS = 0,
ENABLED_INTCS,
- INTCS,
-
/* interrupt sources INTCS */
/* IRQ0S - IRQ31S */
@@ -426,8 +429,6 @@
INTCS_VECT(CPORTS2R, 0x1a20),
/* CEC */
INTCS_VECT(JPU6E, 0x1a80),
-
- INTC_VECT(INTCS, 0xf80),
};
static struct intc_group intcs_groups[] __initdata = {
@@ -490,9 +491,6 @@
{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
{ MFIS2_INTCS, CPORTS2R, 0, 0,
JPU6E, 0, 0, 0 } },
- { 0xffd20104, 0, 16, /* INTAMASK */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, INTCS } },
};
/* Priority is needed for INTCA to receive the INTCS interrupt */
@@ -557,18 +555,30 @@
void __init sh7372_init_irq(void)
{
void __iomem *intevtsa;
+ int n;
intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE);
intevtsa = intcs_ffd2 + 0x100;
intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
register_intc_controller(&intca_desc);
- register_intc_controller(&intca_irq_pins_desc);
+ register_intc_controller(&intca_irq_pins_lo_desc);
+ register_intc_controller(&intca_irq_pins_hi_desc);
register_intc_controller(&intcs_desc);
+ /* setup dummy cascade chip for INTCS */
+ n = evt2irq(0xf80);
+ irq_alloc_desc_at(n, numa_node_id());
+ irq_set_chip_and_handler_name(n, &dummy_irq_chip,
+ handle_level_irq, "level");
+ set_irq_flags(n, IRQF_VALID); /* yuck */
+
/* demux using INTEVTSA */
- irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
- irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
+ irq_set_handler_data(n, (void *)intevtsa);
+ irq_set_chained_handler(n, intcs_demux);
+
+ /* unmask INTCS in INTAMASK */
+ iowrite16(0, intcs_ffd2 + 0x104);
}
static unsigned short ffd2[0x200];
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2fe8f83..4c7fece 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
#include <linux/uio_driver.h>
#include <linux/delay.h>
#include <linux/input.h>
@@ -1092,3 +1093,50 @@
/* override timer setup with soc-specific code */
shmobile_timer.init = sh7372_earlytimer_init;
}
+
+#ifdef CONFIG_USE_OF
+
+void __init sh7372_add_early_devices_dt(void)
+{
+ shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
+
+ early_platform_add_devices(sh7372_early_devices,
+ ARRAY_SIZE(sh7372_early_devices));
+
+ /* setup early console here as well */
+ shmobile_setup_console();
+}
+
+static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
+ { }
+};
+
+void __init sh7372_add_standard_devices_dt(void)
+{
+ /* clocks are setup late during boot in the case of DT */
+ sh7372_clock_init();
+
+ platform_add_devices(sh7372_early_devices,
+ ARRAY_SIZE(sh7372_early_devices));
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ sh7372_auxdata_lookup, NULL);
+}
+
+static const char *sh7372_boards_compat_dt[] __initdata = {
+ "renesas,sh7372",
+ NULL,
+};
+
+DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
+ .map_io = sh7372_map_io,
+ .init_early = sh7372_add_early_devices_dt,
+ .nr_irqs = NR_IRQS_LEGACY,
+ .init_irq = sh7372_init_irq,
+ .handle_irq = shmobile_handle_irq_intc,
+ .init_machine = sh7372_add_standard_devices_dt,
+ .timer = &shmobile_timer,
+ .dt_compat = sh7372_boards_compat_dt,
+MACHINE_END
+
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 2fba5f3..599e008 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -19,9 +19,26 @@
*
*/
#include <linux/platform_device.h>
+#include <linux/delay.h>
#include <asm/mach/time.h>
#include <asm/smp_twd.h>
+void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
+ unsigned int mult, unsigned int div)
+{
+ /* calculate a worst-case loops-per-jiffy value
+ * based on maximum cpu core mhz setting and the
+ * __delay() implementation in arch/arm/lib/delay.S
+ *
+ * this will result in a longer delay than expected
+ * when the cpu core runs on lower frequencies.
+ */
+
+ unsigned int value = (1000000 * mult) / (HZ * div);
+
+ lpj_fine = max_cpu_core_mhz * value;
+}
+
static void __init shmobile_late_time_init(void)
{
/*
diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig
index 2cee6b0..d9fe11c 100644
--- a/arch/arm/mach-spear3xx/Kconfig
+++ b/arch/arm/mach-spear3xx/Kconfig
@@ -5,39 +5,19 @@
if ARCH_SPEAR3XX
menu "SPEAr3xx Implementations"
-config BOARD_SPEAR300_EVB
- bool "SPEAr300 Evaluation Board"
- select MACH_SPEAR300
- help
- Supports ST SPEAr300 Evaluation Board
-
-config BOARD_SPEAR310_EVB
- bool "SPEAr310 Evaluation Board"
- select MACH_SPEAR310
- help
- Supports ST SPEAr310 Evaluation Board
-
-config BOARD_SPEAR320_EVB
- bool "SPEAr320 Evaluation Board"
- select MACH_SPEAR320
- help
- Supports ST SPEAr320 Evaluation Board
-
-endmenu
-
config MACH_SPEAR300
- bool "SPEAr300"
+ bool "SPEAr300 Machine support with Device Tree"
help
- Supports ST SPEAr300 Machine
+ Supports ST SPEAr300 machine configured via the device-tree
config MACH_SPEAR310
- bool "SPEAr310"
+ bool "SPEAr310 Machine support with Device Tree"
help
- Supports ST SPEAr310 Machine
+ Supports ST SPEAr310 machine configured via the device-tree
config MACH_SPEAR320
- bool "SPEAr320"
+ bool "SPEAr320 Machine support with Device Tree"
help
- Supports ST SPEAr320 Machine
-
+ Supports ST SPEAr320 machine configured via the device-tree
+endmenu
endif #ARCH_SPEAR3XX
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
index b248624..17b5d83 100644
--- a/arch/arm/mach-spear3xx/Makefile
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -3,24 +3,13 @@
#
# common files
-obj-y += spear3xx.o clock.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o
# spear300 specific files
obj-$(CONFIG_MACH_SPEAR300) += spear300.o
-# spear300 boards files
-obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
-
-
# spear310 specific files
obj-$(CONFIG_MACH_SPEAR310) += spear310.o
-# spear310 boards files
-obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
-
-
# spear320 specific files
obj-$(CONFIG_MACH_SPEAR320) += spear320.o
-
-# spear320 boards files
-obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot
index 4674a4c..d93e217 100644
--- a/arch/arm/mach-spear3xx/Makefile.boot
+++ b/arch/arm/mach-spear3xx/Makefile.boot
@@ -1,3 +1,7 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 6c4841f..cd6c110 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -11,12 +11,112 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/clkdev.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/of_platform.h>
#include <asm/mach-types.h>
#include <plat/clock.h>
#include <mach/misc_regs.h>
+#include <mach/spear.h>
+
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL1_MOD (MISC_BASE + 0x010)
+#define PLL2_CTR (MISC_BASE + 0x014)
+/* PLL_CTR register masks */
+#define PLL_ENABLE 2
+#define PLL_MODE_SHIFT 4
+#define PLL_MODE_MASK 0x3
+#define PLL_MODE_NORMAL 0
+#define PLL_MODE_FRACTION 1
+#define PLL_MODE_DITH_DSB 2
+#define PLL_MODE_DITH_SSB 3
+
+#define PLL2_FRQ (MISC_BASE + 0x018)
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT 0
+#define PLL_DIV_N_MASK 0xFF
+#define PLL_DIV_P_SHIFT 8
+#define PLL_DIV_P_MASK 0x7
+#define PLL_NORM_FDBK_M_SHIFT 24
+#define PLL_NORM_FDBK_M_MASK 0xFF
+#define PLL_DITH_FDBK_M_SHIFT 16
+#define PLL_DITH_FDBK_M_MASK 0xFFFF
+
+#define PLL2_MOD (MISC_BASE + 0x01C)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT 10
+#define PLL_HCLK_RATIO_MASK 0x3
+#define HCLK_PCLK_RATIO_SHIFT 8
+#define HCLK_PCLK_RATIO_MASK 0x3
+
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+/* PERIP_CLK_CFG register masks */
+#define UART_CLK_SHIFT 4
+#define UART_CLK_MASK 0x1
+#define FIRDA_CLK_SHIFT 5
+#define FIRDA_CLK_MASK 0x3
+#define GPT0_CLK_SHIFT 8
+#define GPT1_CLK_SHIFT 11
+#define GPT2_CLK_SHIFT 12
+#define GPT_CLK_MASK 0x1
+#define AUX_CLK_PLL3_VAL 0
+#define AUX_CLK_PLL1_VAL 1
+
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+/* PERIP1_CLK_ENB register masks */
+#define UART_CLK_ENB 3
+#define SSP_CLK_ENB 5
+#define I2C_CLK_ENB 7
+#define JPEG_CLK_ENB 8
+#define FIRDA_CLK_ENB 10
+#define GPT1_CLK_ENB 11
+#define GPT2_CLK_ENB 12
+#define ADC_CLK_ENB 15
+#define RTC_CLK_ENB 17
+#define GPIO_CLK_ENB 18
+#define DMA_CLK_ENB 19
+#define SMI_CLK_ENB 21
+#define GMAC_CLK_ENB 23
+#define USBD_CLK_ENB 24
+#define USBH_CLK_ENB 25
+#define C3_CLK_ENB 31
+
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+
+#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT 0
+#define GPT_MSCALE_MASK 0xFFF
+#define GPT_NSCALE_SHIFT 12
+#define GPT_NSCALE_MASK 0xF
+
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+#define EXPI_CLK_CFG (MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB 31
+#define AUX_EQ_SEL_SHIFT 30
+#define AUX_EQ_SEL_MASK 1
+#define AUX_EQ1_SEL 0
+#define AUX_EQ2_SEL 1
+#define AUX_XSCALE_SHIFT 16
+#define AUX_XSCALE_MASK 0xFFF
+#define AUX_YSCALE_SHIFT 0
+#define AUX_YSCALE_MASK 0xFFF
/* root clks */
/* 32 KHz oscillator clock */
@@ -411,6 +511,21 @@
.recalc = &follow_parent,
};
+/* clock derived from usbh clk */
+/* usbh0 clock */
+static struct clk usbh0_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &usbh_clk,
+ .recalc = &follow_parent,
+};
+
+/* usbh1 clock */
+static struct clk usbh1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &usbh_clk,
+ .recalc = &follow_parent,
+};
+
/* clock derived from ahb clk */
/* apb masks structure */
static struct bus_clk_masks apb_masks = {
@@ -652,109 +767,126 @@
/* array of all spear 3xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
+ CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
/* root clks */
- { .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
- { .con_id = "osc_24m_clk", .clk = &osc_24m_clk},
+ CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
+ CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk),
/* clock derived from 32 KHz osc clk */
- { .dev_id = "rtc-spear", .clk = &rtc_clk},
+ CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk),
/* clock derived from 24 MHz osc clk */
- { .con_id = "pll1_clk", .clk = &pll1_clk},
- { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
- { .dev_id = "wdt", .clk = &wdt_clk},
+ CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
+ CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
+ CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk),
/* clock derived from pll1 clk */
- { .con_id = "cpu_clk", .clk = &cpu_clk},
- { .con_id = "ahb_clk", .clk = &ahb_clk},
- { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
- { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
- { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
- { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk},
- { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
- { .dev_id = "uart", .clk = &uart_clk},
- { .dev_id = "firda", .clk = &firda_clk},
- { .dev_id = "gpt0", .clk = &gpt0_clk},
- { .dev_id = "gpt1", .clk = &gpt1_clk},
- { .dev_id = "gpt2", .clk = &gpt2_clk},
+ CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
+ CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
+ CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
+ CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
+ CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
+ CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk),
+ CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
+ CLKDEV_INIT("d0000000.serial", NULL, &uart_clk),
+ CLKDEV_INIT("firda", NULL, &firda_clk),
+ CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
+ CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
+ CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
/* clock derived from pll3 clk */
- { .dev_id = "designware_udc", .clk = &usbd_clk},
- { .con_id = "usbh_clk", .clk = &usbh_clk},
+ CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
+ CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk),
+ /* clock derived from usbh clk */
+ CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
+ CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
/* clock derived from ahb clk */
- { .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
- { .dev_id = "dma", .clk = &dma_clk},
- { .dev_id = "jpeg", .clk = &jpeg_clk},
- { .dev_id = "gmac", .clk = &gmac_clk},
- { .dev_id = "smi", .clk = &smi_clk},
- { .dev_id = "c3", .clk = &c3_clk},
+ CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
+ CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
+ CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
+ CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
+ CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
+ CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
+ CLKDEV_INIT("c3", NULL, &c3_clk),
/* clock derived from apb clk */
- { .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
- { .dev_id = "gpio", .clk = &gpio_clk},
+ CLKDEV_INIT("adc", NULL, &adc_clk),
+ CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk),
+ CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk),
};
/* array of all spear 300 clock lookups */
#ifdef CONFIG_MACH_SPEAR300
static struct clk_lookup spear300_clk_lookups[] = {
- { .dev_id = "clcd", .clk = &clcd_clk},
- { .con_id = "fsmc", .clk = &fsmc_clk},
- { .dev_id = "gpio1", .clk = &gpio1_clk},
- { .dev_id = "keyboard", .clk = &kbd_clk},
- { .dev_id = "sdhci", .clk = &sdhci_clk},
+ CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk),
+ CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk),
+ CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk),
+ CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk),
+ CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
};
+
+void __init spear300_clk_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+ clk_register(&spear_clk_lookups[i]);
+
+ for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++)
+ clk_register(&spear300_clk_lookups[i]);
+
+ clk_init();
+}
#endif
/* array of all spear 310 clock lookups */
#ifdef CONFIG_MACH_SPEAR310
static struct clk_lookup spear310_clk_lookups[] = {
- { .con_id = "fsmc", .clk = &fsmc_clk},
- { .con_id = "emi", .clk = &emi_clk},
- { .dev_id = "uart1", .clk = &uart1_clk},
- { .dev_id = "uart2", .clk = &uart2_clk},
- { .dev_id = "uart3", .clk = &uart3_clk},
- { .dev_id = "uart4", .clk = &uart4_clk},
- { .dev_id = "uart5", .clk = &uart5_clk},
+ CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk),
+ CLKDEV_INIT(NULL, "emi", &emi_clk),
+ CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk),
+ CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk),
+ CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk),
+ CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk),
+ CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk),
};
+
+void __init spear310_clk_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+ clk_register(&spear_clk_lookups[i]);
+
+ for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++)
+ clk_register(&spear310_clk_lookups[i]);
+
+ clk_init();
+}
#endif
/* array of all spear 320 clock lookups */
#ifdef CONFIG_MACH_SPEAR320
static struct clk_lookup spear320_clk_lookups[] = {
- { .dev_id = "clcd", .clk = &clcd_clk},
- { .con_id = "fsmc", .clk = &fsmc_clk},
- { .dev_id = "i2c_designware.1", .clk = &i2c1_clk},
- { .con_id = "emi", .clk = &emi_clk},
- { .dev_id = "pwm", .clk = &pwm_clk},
- { .dev_id = "sdhci", .clk = &sdhci_clk},
- { .dev_id = "c_can_platform.0", .clk = &can0_clk},
- { .dev_id = "c_can_platform.1", .clk = &can1_clk},
- { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
- { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
- { .dev_id = "uart1", .clk = &uart1_clk},
- { .dev_id = "uart2", .clk = &uart2_clk},
+ CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk),
+ CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk),
+ CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk),
+ CLKDEV_INIT(NULL, "emi", &emi_clk),
+ CLKDEV_INIT("pwm", NULL, &pwm_clk),
+ CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
+ CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk),
+ CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk),
+ CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk),
+ CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk),
+ CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk),
+ CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk),
};
-#endif
-void __init spear3xx_clk_init(void)
+void __init spear320_clk_init(void)
{
- int i, cnt;
- struct clk_lookup *lookups;
-
- if (machine_is_spear300()) {
- cnt = ARRAY_SIZE(spear300_clk_lookups);
- lookups = spear300_clk_lookups;
- } else if (machine_is_spear310()) {
- cnt = ARRAY_SIZE(spear310_clk_lookups);
- lookups = spear310_clk_lookups;
- } else {
- cnt = ARRAY_SIZE(spear320_clk_lookups);
- lookups = spear320_clk_lookups;
- }
+ int i;
for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
clk_register(&spear_clk_lookups[i]);
- for (i = 0; i < cnt; i++)
- clk_register(&lookups[i]);
+ for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++)
+ clk_register(&spear320_clk_lookups[i]);
clk_init();
}
+#endif
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 14276e5..e4f4d72 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -14,6 +14,7 @@
#ifndef __MACH_GENERIC_H
#define __MACH_GENERIC_H
+#include <linux/amba/pl08x.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
@@ -21,26 +22,15 @@
#include <asm/mach/map.h>
#include <plat/padmux.h>
-/* spear3xx declarations */
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE SPEAR3XX_ML1_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ SPEAR3XX_IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2
-
/* Add spear3xx family device structure declarations here */
-extern struct amba_device spear3xx_gpio_device;
-extern struct amba_device spear3xx_uart_device;
extern struct sys_timer spear3xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
/* Add spear3xx family function declarations here */
-void __init spear3xx_clk_init(void);
-void __init spear_setup_timer(void);
+void __init spear_setup_timer(resource_size_t base, int irq);
void __init spear3xx_map_io(void);
-void __init spear3xx_init_irq(void);
-void __init spear3xx_init(void);
+void __init spear3xx_dt_init_irq(void);
void spear_restart(char, const char *);
@@ -99,9 +89,6 @@
/* spear300 declarations */
#ifdef CONFIG_MACH_SPEAR300
-/* Add spear300 machine device structure declarations here */
-extern struct amba_device spear300_gpio1_device;
-
/* pad mux modes */
extern struct pmx_mode spear300_nand_mode;
extern struct pmx_mode spear300_nor_mode;
@@ -133,16 +120,13 @@
extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
extern struct pmx_dev spear300_pmx_gpio1;
-/* Add spear300 machine function declarations here */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count);
+/* Add spear300 machine declarations here */
+void __init spear300_clk_init(void);
#endif /* CONFIG_MACH_SPEAR300 */
/* spear310 declarations */
#ifdef CONFIG_MACH_SPEAR310
-/* Add spear310 machine device structure declarations here */
-
/* pad mux devices */
extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
extern struct pmx_dev spear310_pmx_emi_cs_2_3;
@@ -153,16 +137,13 @@
extern struct pmx_dev spear310_pmx_rs485_0_1;
extern struct pmx_dev spear310_pmx_tdm0;
-/* Add spear310 machine function declarations here */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count);
+/* Add spear310 machine declarations here */
+void __init spear310_clk_init(void);
#endif /* CONFIG_MACH_SPEAR310 */
/* spear320 declarations */
#ifdef CONFIG_MACH_SPEAR320
-/* Add spear320 machine device structure declarations here */
-
/* pad mux modes */
extern struct pmx_mode spear320_auto_net_smii_mode;
extern struct pmx_mode spear320_auto_net_mii_mode;
@@ -193,9 +174,8 @@
extern struct pmx_dev spear320_pmx_smii1;
extern struct pmx_dev spear320_pmx_i2c1;
-/* Add spear320 machine function declarations here */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count);
+/* Add spear320 machine declarations here */
+void __init spear320_clk_init(void);
#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
index 4660c0d..40a8c178 100644
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x) (x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 6e26544..319620a 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -14,141 +14,15 @@
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
-/* SPEAr3xx IRQ definitions */
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0 0
+/* FIXME: probe all these from DT */
#define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1
#define SPEAR3XX_IRQ_CPU_GPT1_1 2
-#define SPEAR3XX_IRQ_CPU_GPT1_2 3
-#define SPEAR3XX_IRQ_BASIC_GPT1_1 4
-#define SPEAR3XX_IRQ_BASIC_GPT1_2 5
-#define SPEAR3XX_IRQ_BASIC_GPT2_1 6
-#define SPEAR3XX_IRQ_BASIC_GPT2_2 7
-#define SPEAR3XX_IRQ_BASIC_DMA 8
-#define SPEAR3XX_IRQ_BASIC_SMI 9
-#define SPEAR3XX_IRQ_BASIC_RTC 10
-#define SPEAR3XX_IRQ_BASIC_GPIO 11
-#define SPEAR3XX_IRQ_BASIC_WDT 12
-#define SPEAR3XX_IRQ_DDR_CONTROLLER 13
-#define SPEAR3XX_IRQ_SYS_ERROR 14
-#define SPEAR3XX_IRQ_WAKEUP_RCV 15
-#define SPEAR3XX_IRQ_JPEG 16
-#define SPEAR3XX_IRQ_IRDA 17
-#define SPEAR3XX_IRQ_ADC 18
-#define SPEAR3XX_IRQ_UART 19
-#define SPEAR3XX_IRQ_SSP 20
-#define SPEAR3XX_IRQ_I2C 21
-#define SPEAR3XX_IRQ_MAC_1 22
-#define SPEAR3XX_IRQ_MAC_2 23
-#define SPEAR3XX_IRQ_USB_DEV 24
-#define SPEAR3XX_IRQ_USB_H_OHCI_0 25
-#define SPEAR3XX_IRQ_USB_H_EHCI_0 26
-#define SPEAR3XX_IRQ_USB_H_EHCI_1 SPEAR3XX_IRQ_USB_H_EHCI_0
-#define SPEAR3XX_IRQ_USB_H_OHCI_1 27
#define SPEAR3XX_IRQ_GEN_RAS_1 28
#define SPEAR3XX_IRQ_GEN_RAS_2 29
#define SPEAR3XX_IRQ_GEN_RAS_3 30
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1 31
#define SPEAR3XX_IRQ_VIC_END 32
-
#define SPEAR3XX_VIRQ_START SPEAR3XX_IRQ_VIC_END
-/* SPEAr300 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0)
-#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1)
-#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2)
-#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3)
-#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4)
-#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5)
-#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6)
-#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7)
-#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
-
-/* SPEAr310 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0)
-#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1)
-#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2)
-#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3)
-#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4)
-#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5)
-#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6)
-#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
-#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
-#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10)
-#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11)
-#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13)
-#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15)
-#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16)
-#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17)
-
-/* SPEAr320 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0)
-#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1)
-#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3)
-#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4)
-#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6)
-#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7)
-#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
-#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
-#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10)
-#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11)
-#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12)
-#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13)
-#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14)
-#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15)
-#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16)
-
-/*
- * GPIO pins virtual irqs
- * Use the lowest number for the GPIO virtual IRQs base on which subarchs
- * we have compiled in
- */
-#if defined(CONFIG_MACH_SPEAR310)
-#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 18)
-#elif defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 17)
-#else
-#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 9)
-#endif
-
-#define SPEAR300_GPIO1_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_PLGPIO_COUNT 102
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_PLGPIO_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_GPIO_INT_END (SPEAR3XX_PLGPIO_INT_BASE + \
- SPEAR3XX_PLGPIO_COUNT)
-#else
-#define SPEAR3XX_GPIO_INT_END (SPEAR300_GPIO1_INT_BASE + 8)
-#endif
-
-#define SPEAR3XX_VIRQ_END SPEAR3XX_GPIO_INT_END
-#define NR_IRQS SPEAR3XX_VIRQ_END
+#define NR_IRQS 160
#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 5bd8cd8..e0ab72e 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -14,151 +14,7 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/hardware.h>
-
#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR (MISC_BASE + 0x000)
-#define DIAG_CFG_CTR (MISC_BASE + 0x004)
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL1_MOD (MISC_BASE + 0x010)
-#define PLL2_CTR (MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE 2
-#define PLL_MODE_SHIFT 4
-#define PLL_MODE_MASK 0x3
-#define PLL_MODE_NORMAL 0
-#define PLL_MODE_FRACTION 1
-#define PLL_MODE_DITH_DSB 2
-#define PLL_MODE_DITH_SSB 3
-
-#define PLL2_FRQ (MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT 0
-#define PLL_DIV_N_MASK 0xFF
-#define PLL_DIV_P_SHIFT 8
-#define PLL_DIV_P_MASK 0x7
-#define PLL_NORM_FDBK_M_SHIFT 24
-#define PLL_NORM_FDBK_M_MASK 0xFF
-#define PLL_DITH_FDBK_M_SHIFT 16
-#define PLL_DITH_FDBK_M_MASK 0xFFFF
-
-#define PLL2_MOD (MISC_BASE + 0x01C)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT 10
-#define PLL_HCLK_RATIO_MASK 0x3
-#define HCLK_PCLK_RATIO_SHIFT 8
-#define HCLK_PCLK_RATIO_MASK 0x3
-
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT 4
-#define UART_CLK_MASK 0x1
-#define FIRDA_CLK_SHIFT 5
-#define FIRDA_CLK_MASK 0x3
-#define GPT0_CLK_SHIFT 8
-#define GPT1_CLK_SHIFT 11
-#define GPT2_CLK_SHIFT 12
-#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_VAL 0
-#define AUX_CLK_PLL1_VAL 1
-
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB 3
-#define SSP_CLK_ENB 5
-#define I2C_CLK_ENB 7
-#define JPEG_CLK_ENB 8
-#define FIRDA_CLK_ENB 10
-#define GPT1_CLK_ENB 11
-#define GPT2_CLK_ENB 12
-#define ADC_CLK_ENB 15
-#define RTC_CLK_ENB 17
-#define GPIO_CLK_ENB 18
-#define DMA_CLK_ENB 19
-#define SMI_CLK_ENB 21
-#define GMAC_CLK_ENB 23
-#define USBD_CLK_ENB 24
-#define USBH_CLK_ENB 25
-#define C3_CLK_ENB 31
-
-#define SOC_CORE_ID (MISC_BASE + 0x030)
-#define RAS_CLK_ENB (MISC_BASE + 0x034)
-#define PERIP1_SOF_RST (MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST 8
-
-#define SOC_USER_ID (MISC_BASE + 0x03C)
-#define RAS_SOF_RST (MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT 0
-#define GPT_MSCALE_MASK 0xFFF
-#define GPT_NSCALE_SHIFT 12
-#define GPT_NSCALE_MASK 0xF
-
-#define AMEM_CLK_CFG (MISC_BASE + 0x050)
-#define EXPI_CLK_CFG (MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB 31
-#define AUX_EQ_SEL_SHIFT 30
-#define AUX_EQ_SEL_MASK 1
-#define AUX_EQ1_SEL 0
-#define AUX_EQ2_SEL 1
-#define AUX_XSCALE_SHIFT 16
-#define AUX_XSCALE_MASK 0xFFF
-#define AUX_YSCALE_SHIFT 0
-#define AUX_YSCALE_MASK 0xFFF
-
-#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG (MISC_BASE + 0x080)
-#define ICM3_ARB_CFG (MISC_BASE + 0x084)
-#define ICM4_ARB_CFG (MISC_BASE + 0x088)
-#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG (MISC_BASE + 0x090)
-#define ICM7_ARB_CFG (MISC_BASE + 0x094)
-#define ICM8_ARB_CFG (MISC_BASE + 0x098)
-#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR (MISC_BASE + 0x100)
-#define BIST5_CFG_CTR (MISC_BASE + 0x104)
-#define BIST1_STS_RES (MISC_BASE + 0x108)
-#define BIST2_STS_RES (MISC_BASE + 0x10C)
-#define BIST3_STS_RES (MISC_BASE + 0x110)
-#define BIST4_STS_RES (MISC_BASE + 0x114)
-#define BIST5_STS_RES (MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 63fd983..6d4dadc 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -15,60 +15,27 @@
#define __MACH_SPEAR3XX_H
#include <asm/memory.h>
-#include <mach/spear300.h>
-#include <mach/spear310.h>
-#include <mach/spear320.h>
-
-#define SPEAR3XX_ML_SDRAM_BASE UL(0x00000000)
-
-#define SPEAR3XX_ICM9_BASE UL(0xC0000000)
/* ICM1 - Low speed connection */
#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
+#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000)
#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000)
+#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
-#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000)
-#define SPEAR3XX_ICM1_JPEG_BASE UL(0xD0800000)
-#define SPEAR3XX_ICM1_IRDA_BASE UL(0xD1000000)
-#define SPEAR3XX_ICM1_SRAM_BASE UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE UL(0xD8800000)
-#define SPEAR3XX_ICM2_HWACCEL1_BASE UL(0xD9000000)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE UL(0xE0000000)
-#define SPEAR3XX_ICM4_MII_BASE UL(0xE0800000)
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
-#define SPEAR3XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE UL(0xE1800000)
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
-#define SPEAR3XX_ICM4_USB_ARB_BASE UL(0xE2800000)
/* ML1 - Multi Layer CPU Subsystem */
#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
-#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000)
-#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000)
-#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
+#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
+#define SPEAR3XX_CPU_TMR_BASE UL(0xF0000000)
/* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000)
#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
+#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
-#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000)
-#define SPEAR3XX_ICM3_WDT_BASE UL(0xFC880000)
-#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000)
-#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000)
#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
-#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
-#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000)
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE
diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h
deleted file mode 100644
index 3b6ea07..0000000
--- a/arch/arm/mach-spear3xx/include/mach/spear300.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear300.h
- *
- * SPEAr300 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef CONFIG_MACH_SPEAR300
-
-#ifndef __MACH_SPEAR300_H
-#define __MACH_SPEAR300_H
-
-/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE UL(0x50000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR300_INT_ENB_MASK_REG 0x54
-#define SPEAR300_INT_STS_MASK_REG 0x58
-#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0)
-#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1)
-#define SPEAR300_I2S_IRQ_MASK (1 << 2)
-#define SPEAR300_TDM_IRQ_MASK (1 << 3)
-#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4)
-#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5)
-#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6)
-#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7)
-#define SPEAR300_GPIO1_IRQ_MASK (1 << 8)
-
-#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF
-
-#define SPEAR300_CLCD_BASE UL(0x60000000)
-#define SPEAR300_SDHCI_BASE UL(0x70000000)
-#define SPEAR300_NAND_0_BASE UL(0x80000000)
-#define SPEAR300_NAND_1_BASE UL(0x84000000)
-#define SPEAR300_NAND_2_BASE UL(0x88000000)
-#define SPEAR300_NAND_3_BASE UL(0x8c000000)
-#define SPEAR300_NOR_0_BASE UL(0x90000000)
-#define SPEAR300_NOR_1_BASE UL(0x91000000)
-#define SPEAR300_NOR_2_BASE UL(0x92000000)
-#define SPEAR300_NOR_3_BASE UL(0x93000000)
-#define SPEAR300_FSMC_BASE UL(0x94000000)
-#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
-#define SPEAR300_KEYBOARD_BASE UL(0xA0000000)
-#define SPEAR300_GPIO_BASE UL(0xA9000000)
-
-#endif /* __MACH_SPEAR300_H */
-
-#endif /* CONFIG_MACH_SPEAR300 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h
deleted file mode 100644
index 1567d0da..0000000
--- a/arch/arm/mach-spear3xx/include/mach/spear310.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear310.h
- *
- * SPEAr310 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef CONFIG_MACH_SPEAR310
-
-#ifndef __MACH_SPEAR310_H
-#define __MACH_SPEAR310_H
-
-#define SPEAR310_NAND_BASE UL(0x40000000)
-#define SPEAR310_FSMC_BASE UL(0x44000000)
-#define SPEAR310_UART1_BASE UL(0xB2000000)
-#define SPEAR310_UART2_BASE UL(0xB2080000)
-#define SPEAR310_UART3_BASE UL(0xB2100000)
-#define SPEAR310_UART4_BASE UL(0xB2180000)
-#define SPEAR310_UART5_BASE UL(0xB2200000)
-#define SPEAR310_HDLC_BASE UL(0xB2800000)
-#define SPEAR310_RS485_0_BASE UL(0xB3000000)
-#define SPEAR310_RS485_1_BASE UL(0xB3800000)
-#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR310_INT_STS_MASK_REG 0x04
-#define SPEAR310_SMII0_IRQ_MASK (1 << 0)
-#define SPEAR310_SMII1_IRQ_MASK (1 << 1)
-#define SPEAR310_SMII2_IRQ_MASK (1 << 2)
-#define SPEAR310_SMII3_IRQ_MASK (1 << 3)
-#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4)
-#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5)
-#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6)
-#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7)
-#define SPEAR310_UART1_IRQ_MASK (1 << 8)
-#define SPEAR310_UART2_IRQ_MASK (1 << 9)
-#define SPEAR310_UART3_IRQ_MASK (1 << 10)
-#define SPEAR310_UART4_IRQ_MASK (1 << 11)
-#define SPEAR310_UART5_IRQ_MASK (1 << 12)
-#define SPEAR310_EMI_IRQ_MASK (1 << 13)
-#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14)
-#define SPEAR310_RS485_0_IRQ_MASK (1 << 15)
-#define SPEAR310_RS485_1_IRQ_MASK (1 << 16)
-
-#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF
-#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00
-#define SPEAR310_SHIRQ_RAS3_MASK 0x02000
-#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000
-
-#endif /* __MACH_SPEAR310_H */
-
-#endif /* CONFIG_MACH_SPEAR310 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
deleted file mode 100644
index 8cfa83f..0000000
--- a/arch/arm/mach-spear3xx/include/mach/spear320.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear320.h
- *
- * SPEAr320 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef CONFIG_MACH_SPEAR320
-
-#ifndef __MACH_SPEAR320_H
-#define __MACH_SPEAR320_H
-
-#define SPEAR320_EMI_CTRL_BASE UL(0x40000000)
-#define SPEAR320_FSMC_BASE UL(0x4C000000)
-#define SPEAR320_NAND_BASE UL(0x50000000)
-#define SPEAR320_I2S_BASE UL(0x60000000)
-#define SPEAR320_SDHCI_BASE UL(0x70000000)
-#define SPEAR320_CLCD_BASE UL(0x90000000)
-#define SPEAR320_PAR_PORT_BASE UL(0xA0000000)
-#define SPEAR320_CAN0_BASE UL(0xA1000000)
-#define SPEAR320_CAN1_BASE UL(0xA2000000)
-#define SPEAR320_UART1_BASE UL(0xA3000000)
-#define SPEAR320_UART2_BASE UL(0xA4000000)
-#define SPEAR320_SSP0_BASE UL(0xA5000000)
-#define SPEAR320_SSP1_BASE UL(0xA6000000)
-#define SPEAR320_I2C_BASE UL(0xA7000000)
-#define SPEAR320_PWM_BASE UL(0xA8000000)
-#define SPEAR320_SMII0_BASE UL(0xAA000000)
-#define SPEAR320_SMII1_BASE UL(0xAB000000)
-#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR320_INT_STS_MASK_REG 0x04
-#define SPEAR320_INT_CLR_MASK_REG 0x04
-#define SPEAR320_INT_ENB_MASK_REG 0x08
-#define SPEAR320_GPIO_IRQ_MASK (1 << 0)
-#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1)
-#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2)
-#define SPEAR320_EMI_IRQ_MASK (1 << 7)
-#define SPEAR320_CLCD_IRQ_MASK (1 << 8)
-#define SPEAR320_SPP_IRQ_MASK (1 << 9)
-#define SPEAR320_SDHCI_IRQ_MASK (1 << 10)
-#define SPEAR320_CAN_U_IRQ_MASK (1 << 11)
-#define SPEAR320_CAN_L_IRQ_MASK (1 << 12)
-#define SPEAR320_UART1_IRQ_MASK (1 << 13)
-#define SPEAR320_UART2_IRQ_MASK (1 << 14)
-#define SPEAR320_SSP1_IRQ_MASK (1 << 15)
-#define SPEAR320_SSP2_IRQ_MASK (1 << 16)
-#define SPEAR320_SMII0_IRQ_MASK (1 << 17)
-#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18)
-#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19)
-#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20)
-#define SPEAR320_I2C1_IRQ_MASK (1 << 21)
-
-#define SPEAR320_SHIRQ_RAS1_MASK 0x000380
-#define SPEAR320_SHIRQ_RAS3_MASK 0x000007
-#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800
-
-#endif /* __MACH_SPEAR320_H */
-
-#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f7db668..febcdd8 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -3,21 +3,62 @@
*
* SPEAr300 machine source file
*
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr300: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+/* Base address of various IPs */
+#define SPEAR300_TELECOM_BASE UL(0x50000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR300_INT_ENB_MASK_REG 0x54
+#define SPEAR300_INT_STS_MASK_REG 0x58
+#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0)
+#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1)
+#define SPEAR300_I2S_IRQ_MASK (1 << 2)
+#define SPEAR300_TDM_IRQ_MASK (1 << 3)
+#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4)
+#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5)
+#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6)
+#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7)
+#define SPEAR300_GPIO1_IRQ_MASK (1 << 8)
+
+#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF
+
+#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
+
+
+/* SPEAr300 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0)
+#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1)
+#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2)
+#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3)
+#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4)
+#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5)
+#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6)
+#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7)
+#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
/* pad multiplexing support */
/* muxing registers */
@@ -423,45 +464,275 @@
},
};
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
- .gpio_base = 8,
- .irq_base = SPEAR300_GPIO1_INT_BASE,
+/* padmux devices to enable */
+static struct pmx_dev *spear300_evb_pmx_devs[] = {
+ /* spear3xx specific devices */
+ &spear3xx_pmx_i2c,
+ &spear3xx_pmx_ssp_cs,
+ &spear3xx_pmx_ssp,
+ &spear3xx_pmx_mii,
+ &spear3xx_pmx_uart0,
+
+ /* spear300 specific devices */
+ &spear300_pmx_fsmc_2_chips,
+ &spear300_pmx_clcd,
+ &spear300_pmx_telecom_sdhci_4bit,
+ &spear300_pmx_gpio1,
};
-AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
- {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear300_dma_info[] = {
+ {
+ .bus_id = "uart0_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart0_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "adc",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "to_jpeg",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "from_jpeg",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras0_rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras0_tx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras1_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras1_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras2_rx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras2_tx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras3_rx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras3_tx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras4_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras4_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ },
+};
-/* spear300 routines */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count)
+/* Add SPEAr300 auxdata to pass platform data */
+static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+ &pl022_plat_data),
+ OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+ &pl080_plat_data),
+ {}
+};
+
+static void __init spear300_dt_init(void)
{
- int ret = 0;
+ int ret = -EINVAL;
- /* call spear3xx family common init function */
- spear3xx_init();
+ pl080_plat_data.slave_channels = spear300_dma_info;
+ pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ spear300_auxdata_lookup, NULL);
/* shared irq registration */
shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
if (shirq_ras1.regs.base) {
ret = spear_shirq_register(&shirq_ras1);
if (ret)
- printk(KERN_ERR "Error registering Shared IRQ\n");
+ pr_err("Error registering Shared IRQ\n");
}
- /* pmx initialization */
- pmx_driver.mode = pmx_mode;
- pmx_driver.devs = pmx_devs;
- pmx_driver.devs_count = pmx_dev_count;
+ if (of_machine_is_compatible("st,spear300-evb")) {
+ /* pmx initialization */
+ pmx_driver.mode = &spear300_photo_frame_mode;
+ pmx_driver.devs = spear300_evb_pmx_devs;
+ pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs);
- pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
- if (pmx_driver.base) {
- ret = pmx_register(&pmx_driver);
+ pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
+ if (pmx_driver.base) {
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ pr_err("padmux: registration failed. err no: %d\n",
+ ret);
+ /* Free Mapping, device selection already done */
+ iounmap(pmx_driver.base);
+ }
+
if (ret)
- printk(KERN_ERR "padmux: registration failed. err no"
- ": %d\n", ret);
- /* Free Mapping, device selection already done */
- iounmap(pmx_driver.base);
+ pr_err("Initialization Failed");
}
}
+
+static const char * const spear300_dt_board_compat[] = {
+ "st,spear300",
+ "st,spear300-evb",
+ NULL,
+};
+
+static void __init spear300_map_io(void)
+{
+ spear3xx_map_io();
+ spear300_clk_init();
+}
+
+DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
+ .map_io = spear300_map_io,
+ .init_irq = spear3xx_dt_init_irq,
+ .handle_irq = vic_handle_irq,
+ .timer = &spear3xx_timer,
+ .init_machine = spear300_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear300_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
deleted file mode 100644
index 3462ab9..0000000
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear300_evb.c
- *
- * SPEAr300 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp_cs,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_mii,
- &spear3xx_pmx_uart0,
-
- /* spear300 specific devices */
- &spear300_pmx_fsmc_2_chips,
- &spear300_pmx_clcd,
- &spear300_pmx_telecom_sdhci_4bit,
- &spear300_pmx_gpio1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
- /* spear3xx specific devices */
- &spear3xx_gpio_device,
- &spear3xx_uart_device,
-
- /* spear300 specific devices */
- &spear300_gpio1_device,
-};
-
-static struct platform_device *plat_devs[] __initdata = {
- /* spear3xx specific devices */
-
- /* spear300 specific devices */
-};
-
-static void __init spear300_evb_init(void)
-{
- unsigned int i;
-
- /* call spear300 machine init function */
- spear300_init(&spear300_photo_frame_mode, pmx_devs,
- ARRAY_SIZE(pmx_devs));
-
- /* Add Platform Devices */
- platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
- /* Add Amba Devices */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
- .atag_offset = 0x100,
- .map_io = spear3xx_map_io,
- .init_irq = spear3xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear3xx_timer,
- .init_machine = spear300_evb_init,
- .restart = spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index febaa6f..b26e415 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -3,19 +3,84 @@
*
* SPEAr310 machine source file
*
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr310: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+#define SPEAR310_UART1_BASE UL(0xB2000000)
+#define SPEAR310_UART2_BASE UL(0xB2080000)
+#define SPEAR310_UART3_BASE UL(0xB2100000)
+#define SPEAR310_UART4_BASE UL(0xB2180000)
+#define SPEAR310_UART5_BASE UL(0xB2200000)
+#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR310_INT_STS_MASK_REG 0x04
+#define SPEAR310_SMII0_IRQ_MASK (1 << 0)
+#define SPEAR310_SMII1_IRQ_MASK (1 << 1)
+#define SPEAR310_SMII2_IRQ_MASK (1 << 2)
+#define SPEAR310_SMII3_IRQ_MASK (1 << 3)
+#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4)
+#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5)
+#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6)
+#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7)
+#define SPEAR310_UART1_IRQ_MASK (1 << 8)
+#define SPEAR310_UART2_IRQ_MASK (1 << 9)
+#define SPEAR310_UART3_IRQ_MASK (1 << 10)
+#define SPEAR310_UART4_IRQ_MASK (1 << 11)
+#define SPEAR310_UART5_IRQ_MASK (1 << 12)
+#define SPEAR310_EMI_IRQ_MASK (1 << 13)
+#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14)
+#define SPEAR310_RS485_0_IRQ_MASK (1 << 15)
+#define SPEAR310_RS485_1_IRQ_MASK (1 << 16)
+
+#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF
+#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00
+#define SPEAR310_SHIRQ_RAS3_MASK 0x02000
+#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000
+
+/* SPEAr310 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0)
+#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1)
+#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2)
+#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3)
+#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4)
+#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5)
+#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6)
+#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
+#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
+#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10)
+#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11)
+#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13)
+#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15)
+#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16)
+#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17)
+
/* pad multiplexing support */
/* muxing registers */
@@ -255,17 +320,271 @@
},
};
-/* Add spear310 specific devices here */
+/* padmux devices to enable */
+static struct pmx_dev *spear310_evb_pmx_devs[] = {
+ /* spear3xx specific devices */
+ &spear3xx_pmx_i2c,
+ &spear3xx_pmx_ssp,
+ &spear3xx_pmx_gpio_pin0,
+ &spear3xx_pmx_gpio_pin1,
+ &spear3xx_pmx_gpio_pin2,
+ &spear3xx_pmx_gpio_pin3,
+ &spear3xx_pmx_gpio_pin4,
+ &spear3xx_pmx_gpio_pin5,
+ &spear3xx_pmx_uart0,
-/* spear310 routines */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count)
+ /* spear310 specific devices */
+ &spear310_pmx_emi_cs_0_1_4_5,
+ &spear310_pmx_emi_cs_2_3,
+ &spear310_pmx_uart1,
+ &spear310_pmx_uart2,
+ &spear310_pmx_uart3_4_5,
+ &spear310_pmx_fsmc,
+ &spear310_pmx_rs485_0_1,
+ &spear310_pmx_tdm0,
+};
+
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear310_dma_info[] = {
+ {
+ .bus_id = "uart0_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart0_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "adc",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "to_jpeg",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "from_jpeg",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart1_rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart1_tx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart2_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart2_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart3_rx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart3_tx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart4_rx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart4_tx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart5_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart5_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ },
+};
+
+/* uart devices plat data */
+static struct amba_pl011_data spear310_uart_data[] = {
+ {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart1_tx",
+ .dma_rx_param = "uart1_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart2_tx",
+ .dma_rx_param = "uart2_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart3_tx",
+ .dma_rx_param = "uart3_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart4_tx",
+ .dma_rx_param = "uart4_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart5_tx",
+ .dma_rx_param = "uart5_rx",
+ },
+};
+
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+ &pl022_plat_data),
+ OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+ &pl080_plat_data),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
+ &spear310_uart_data[0]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
+ &spear310_uart_data[1]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
+ &spear310_uart_data[2]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
+ &spear310_uart_data[3]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
+ &spear310_uart_data[4]),
+ {}
+};
+
+static void __init spear310_dt_init(void)
{
void __iomem *base;
int ret = 0;
- /* call spear3xx family common init function */
- spear3xx_init();
+ pl080_plat_data.slave_channels = spear310_dma_info;
+ pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ spear310_auxdata_lookup, NULL);
/* shared irq registration */
base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
@@ -274,35 +593,59 @@
shirq_ras1.regs.base = base;
ret = spear_shirq_register(&shirq_ras1);
if (ret)
- printk(KERN_ERR "Error registering Shared IRQ 1\n");
+ pr_err("Error registering Shared IRQ 1\n");
/* shirq 2 */
shirq_ras2.regs.base = base;
ret = spear_shirq_register(&shirq_ras2);
if (ret)
- printk(KERN_ERR "Error registering Shared IRQ 2\n");
+ pr_err("Error registering Shared IRQ 2\n");
/* shirq 3 */
shirq_ras3.regs.base = base;
ret = spear_shirq_register(&shirq_ras3);
if (ret)
- printk(KERN_ERR "Error registering Shared IRQ 3\n");
+ pr_err("Error registering Shared IRQ 3\n");
/* shirq 4 */
shirq_intrcomm_ras.regs.base = base;
ret = spear_shirq_register(&shirq_intrcomm_ras);
if (ret)
- printk(KERN_ERR "Error registering Shared IRQ 4\n");
+ pr_err("Error registering Shared IRQ 4\n");
}
- /* pmx initialization */
- pmx_driver.base = base;
- pmx_driver.mode = pmx_mode;
- pmx_driver.devs = pmx_devs;
- pmx_driver.devs_count = pmx_dev_count;
+ if (of_machine_is_compatible("st,spear310-evb")) {
+ /* pmx initialization */
+ pmx_driver.base = base;
+ pmx_driver.mode = NULL;
+ pmx_driver.devs = spear310_evb_pmx_devs;
+ pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
- ret = pmx_register(&pmx_driver);
- if (ret)
- printk(KERN_ERR "padmux: registration failed. err no: %d\n",
- ret);
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ pr_err("padmux: registration failed. err no: %d\n",
+ ret);
+ }
}
+
+static const char * const spear310_dt_board_compat[] = {
+ "st,spear310",
+ "st,spear310-evb",
+ NULL,
+};
+
+static void __init spear310_map_io(void)
+{
+ spear3xx_map_io();
+ spear310_clk_init();
+}
+
+DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
+ .map_io = spear310_map_io,
+ .init_irq = spear3xx_dt_init_irq,
+ .handle_irq = vic_handle_irq,
+ .timer = &spear3xx_timer,
+ .init_machine = spear310_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
deleted file mode 100644
index f92c499..0000000
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear310_evb.c
- *
- * SPEAr310 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_gpio_pin0,
- &spear3xx_pmx_gpio_pin1,
- &spear3xx_pmx_gpio_pin2,
- &spear3xx_pmx_gpio_pin3,
- &spear3xx_pmx_gpio_pin4,
- &spear3xx_pmx_gpio_pin5,
- &spear3xx_pmx_uart0,
-
- /* spear310 specific devices */
- &spear310_pmx_emi_cs_0_1_4_5,
- &spear310_pmx_emi_cs_2_3,
- &spear310_pmx_uart1,
- &spear310_pmx_uart2,
- &spear310_pmx_uart3_4_5,
- &spear310_pmx_fsmc,
- &spear310_pmx_rs485_0_1,
- &spear310_pmx_tdm0,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
- /* spear3xx specific devices */
- &spear3xx_gpio_device,
- &spear3xx_uart_device,
-
- /* spear310 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
- /* spear3xx specific devices */
-
- /* spear310 specific devices */
-};
-
-static void __init spear310_evb_init(void)
-{
- unsigned int i;
-
- /* call spear310 machine init function */
- spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
-
- /* Add Platform Devices */
- platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
- /* Add Amba Devices */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
- .atag_offset = 0x100,
- .map_io = spear3xx_map_io,
- .init_irq = spear3xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear3xx_timer,
- .init_machine = spear310_evb_init,
- .restart = spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index deaaf19..2f5979b 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -3,19 +3,85 @@
*
* SPEAr320 machine source file
*
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr320: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+#define SPEAR320_UART1_BASE UL(0xA3000000)
+#define SPEAR320_UART2_BASE UL(0xA4000000)
+#define SPEAR320_SSP0_BASE UL(0xA5000000)
+#define SPEAR320_SSP1_BASE UL(0xA6000000)
+#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR320_INT_STS_MASK_REG 0x04
+#define SPEAR320_INT_CLR_MASK_REG 0x04
+#define SPEAR320_INT_ENB_MASK_REG 0x08
+#define SPEAR320_GPIO_IRQ_MASK (1 << 0)
+#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1)
+#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2)
+#define SPEAR320_EMI_IRQ_MASK (1 << 7)
+#define SPEAR320_CLCD_IRQ_MASK (1 << 8)
+#define SPEAR320_SPP_IRQ_MASK (1 << 9)
+#define SPEAR320_SDHCI_IRQ_MASK (1 << 10)
+#define SPEAR320_CAN_U_IRQ_MASK (1 << 11)
+#define SPEAR320_CAN_L_IRQ_MASK (1 << 12)
+#define SPEAR320_UART1_IRQ_MASK (1 << 13)
+#define SPEAR320_UART2_IRQ_MASK (1 << 14)
+#define SPEAR320_SSP1_IRQ_MASK (1 << 15)
+#define SPEAR320_SSP2_IRQ_MASK (1 << 16)
+#define SPEAR320_SMII0_IRQ_MASK (1 << 17)
+#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18)
+#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19)
+#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20)
+#define SPEAR320_I2C1_IRQ_MASK (1 << 21)
+
+#define SPEAR320_SHIRQ_RAS1_MASK 0x000380
+#define SPEAR320_SHIRQ_RAS3_MASK 0x000007
+#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800
+
+/* SPEAr320 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0)
+#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1)
+#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3)
+#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4)
+#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6)
+#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7)
+#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
+#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
+#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10)
+#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11)
+#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12)
+#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13)
+#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14)
+#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15)
+#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16)
/* pad multiplexing support */
/* muxing registers */
@@ -508,17 +574,271 @@
},
};
-/* Add spear320 specific devices here */
+/* padmux devices to enable */
+static struct pmx_dev *spear320_evb_pmx_devs[] = {
+ /* spear3xx specific devices */
+ &spear3xx_pmx_i2c,
+ &spear3xx_pmx_ssp,
+ &spear3xx_pmx_mii,
+ &spear3xx_pmx_uart0,
-/* spear320 routines */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count)
+ /* spear320 specific devices */
+ &spear320_pmx_fsmc,
+ &spear320_pmx_sdhci,
+ &spear320_pmx_i2s,
+ &spear320_pmx_uart1,
+ &spear320_pmx_uart2,
+ &spear320_pmx_can,
+ &spear320_pmx_pwm0,
+ &spear320_pmx_pwm1,
+ &spear320_pmx_pwm2,
+ &spear320_pmx_mii1,
+};
+
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear320_dma_info[] = {
+ {
+ .bus_id = "uart0_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart0_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c0_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c0_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "adc",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "to_jpeg",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "from_jpeg",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp1_rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ssp1_tx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ssp2_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ssp2_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_rx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_tx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_rx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_tx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2c1_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2c1_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2c2_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2c2_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s_rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s_tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "rs485_rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "rs485_tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ },
+};
+
+static struct pl022_ssp_controller spear320_ssp_data[] = {
+ {
+ .bus_id = 1,
+ .enable_dma = 1,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp1_tx",
+ .dma_rx_param = "ssp1_rx",
+ .num_chipselect = 2,
+ }, {
+ .bus_id = 2,
+ .enable_dma = 1,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp2_tx",
+ .dma_rx_param = "ssp2_rx",
+ .num_chipselect = 2,
+ }
+};
+
+static struct amba_pl011_data spear320_uart_data[] = {
+ {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart1_tx",
+ .dma_rx_param = "uart1_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart2_tx",
+ .dma_rx_param = "uart2_rx",
+ },
+};
+
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+ &pl022_plat_data),
+ OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+ &pl080_plat_data),
+ OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
+ &spear320_ssp_data[0]),
+ OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
+ &spear320_ssp_data[1]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
+ &spear320_uart_data[0]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
+ &spear320_uart_data[1]),
+ {}
+};
+
+static void __init spear320_dt_init(void)
{
void __iomem *base;
int ret = 0;
- /* call spear3xx family common init function */
- spear3xx_init();
+ pl080_plat_data.slave_channels = spear320_dma_info;
+ pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ spear320_auxdata_lookup, NULL);
/* shared irq registration */
base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
@@ -527,29 +847,53 @@
shirq_ras1.regs.base = base;
ret = spear_shirq_register(&shirq_ras1);
if (ret)
- printk(KERN_ERR "Error registering Shared IRQ 1\n");
+ pr_err("Error registering Shared IRQ 1\n");
/* shirq 3 */
shirq_ras3.regs.base = base;
ret = spear_shirq_register(&shirq_ras3);
if (ret)
- printk(KERN_ERR "Error registering Shared IRQ 3\n");
+ pr_err("Error registering Shared IRQ 3\n");
/* shirq 4 */
shirq_intrcomm_ras.regs.base = base;
ret = spear_shirq_register(&shirq_intrcomm_ras);
if (ret)
- printk(KERN_ERR "Error registering Shared IRQ 4\n");
+ pr_err("Error registering Shared IRQ 4\n");
}
- /* pmx initialization */
- pmx_driver.base = base;
- pmx_driver.mode = pmx_mode;
- pmx_driver.devs = pmx_devs;
- pmx_driver.devs_count = pmx_dev_count;
+ if (of_machine_is_compatible("st,spear320-evb")) {
+ /* pmx initialization */
+ pmx_driver.base = base;
+ pmx_driver.mode = &spear320_auto_net_mii_mode;
+ pmx_driver.devs = spear320_evb_pmx_devs;
+ pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs);
- ret = pmx_register(&pmx_driver);
- if (ret)
- printk(KERN_ERR "padmux: registration failed. err no: %d\n",
- ret);
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ pr_err("padmux: registration failed. err no: %d\n",
+ ret);
+ }
}
+
+static const char * const spear320_dt_board_compat[] = {
+ "st,spear320",
+ "st,spear320-evb",
+ NULL,
+};
+
+static void __init spear320_map_io(void)
+{
+ spear3xx_map_io();
+ spear320_clk_init();
+}
+
+DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
+ .map_io = spear320_map_io,
+ .init_irq = spear3xx_dt_init_irq,
+ .handle_irq = vic_handle_irq,
+ .timer = &spear3xx_timer,
+ .init_machine = spear320_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear320_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
deleted file mode 100644
index 105334a..0000000
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear320_evb.c
- *
- * SPEAr320 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_mii,
- &spear3xx_pmx_uart0,
-
- /* spear320 specific devices */
- &spear320_pmx_fsmc,
- &spear320_pmx_sdhci,
- &spear320_pmx_i2s,
- &spear320_pmx_uart1,
- &spear320_pmx_uart2,
- &spear320_pmx_can,
- &spear320_pmx_pwm0,
- &spear320_pmx_pwm1,
- &spear320_pmx_pwm2,
- &spear320_pmx_mii1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
- /* spear3xx specific devices */
- &spear3xx_gpio_device,
- &spear3xx_uart_device,
-
- /* spear320 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
- /* spear3xx specific devices */
-
- /* spear320 specific devices */
-};
-
-static void __init spear320_evb_init(void)
-{
- unsigned int i;
-
- /* call spear320 machine init function */
- spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
- ARRAY_SIZE(pmx_devs));
-
- /* Add Platform Devices */
- platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
- /* Add Amba Devices */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
- .atag_offset = 0x100,
- .map_io = spear3xx_map_io,
- .init_irq = spear3xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear3xx_timer,
- .init_machine = spear320_evb_init,
- .restart = spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index b1733c3..bbb11ef 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -3,83 +3,25 @@
*
* SPEAr3XX machines common source file
*
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
+#define pr_fmt(fmt) "SPEAr3xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of_irq.h>
#include <linux/io.h>
+#include <asm/hardware/pl080.h>
#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
+#include <plat/pl080.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Add spear3xx machines common devices here */
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data = {
- .gpio_base = 0,
- .irq_base = SPEAR3XX_GPIO_INT_BASE,
-};
-
-AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
- {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
-
-/* uart device registration */
-AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
- {SPEAR3XX_IRQ_UART}, NULL);
-
-/* Do spear3xx familiy common initialization part here */
-void __init spear3xx_init(void)
-{
- /* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear3xx_init_irq(void)
-{
- vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
-}
-
-/* Following will create static virtual/physical mappings */
-struct map_desc spear3xx_io_desc[] __initdata = {
- {
- .virtual = VA_SPEAR3XX_ICM1_UART_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR3XX_ML1_VIC_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- },
-};
-
-/* This will create static memory mapping for selected devices */
-void __init spear3xx_map_io(void)
-{
- iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
-
- /* This will initialize clock framework */
- spear3xx_clk_init();
-}
+#include <mach/spear.h>
/* pad multiplexing support */
/* devices */
@@ -506,6 +448,68 @@
};
#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
+/* ssp device registration */
+struct pl022_ssp_controller pl022_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 1,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp0_tx",
+ .dma_rx_param = "ssp0_rx",
+ /*
+ * This is number of spi devices that can be connected to spi. There are
+ * two type of chipselects on which slave devices can work. One is chip
+ * select provided by spi masters other is controlled through external
+ * gpio's. We can't use chipselect provided from spi master (because as
+ * soon as FIFO becomes empty, CS is disabled and transfer ends). So
+ * this number now depends on number of gpios available for spi. each
+ * slave on each master requires a separate gpio pin.
+ */
+ .num_chipselect = 2,
+};
+
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_signal = pl080_get_signal,
+ .put_signal = pl080_put_signal,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL VIRTUAL
+ * 0xD0000000 0xFD000000
+ * 0xFC000000 0xFC000000
+ */
+struct map_desc spear3xx_io_desc[] __initdata = {
+ {
+ .virtual = VA_SPEAR3XX_ICM1_2_BASE,
+ .pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE,
+ .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+ iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+}
+
static void __init spear3xx_timer_init(void)
{
char pclk_name[] = "pll3_48m_clk";
@@ -530,9 +534,19 @@
clk_put(gpt_clk);
clk_put(pclk);
- spear_setup_timer();
+ spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1);
}
struct sys_timer spear3xx_timer = {
.init = spear3xx_timer_init,
};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+ { .compatible = "arm,pl190-vic", .data = vic_of_init, },
+ { /* Sentinel */ }
+};
+
+void __init spear3xx_dt_init_irq(void)
+{
+ of_irq_init(vic_of_match);
+}
diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot
index 4674a4c..af493da 100644
--- a/arch/arm/mach-spear6xx/Makefile.boot
+++ b/arch/arm/mach-spear6xx/Makefile.boot
@@ -1,3 +1,5 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
+
+dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index a86499a..bef77d4 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -16,6 +16,112 @@
#include <linux/kernel.h>
#include <plat/clock.h>
#include <mach/misc_regs.h>
+#include <mach/spear.h>
+
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL1_MOD (MISC_BASE + 0x010)
+#define PLL2_CTR (MISC_BASE + 0x014)
+/* PLL_CTR register masks */
+#define PLL_ENABLE 2
+#define PLL_MODE_SHIFT 4
+#define PLL_MODE_MASK 0x3
+#define PLL_MODE_NORMAL 0
+#define PLL_MODE_FRACTION 1
+#define PLL_MODE_DITH_DSB 2
+#define PLL_MODE_DITH_SSB 3
+
+#define PLL2_FRQ (MISC_BASE + 0x018)
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT 0
+#define PLL_DIV_N_MASK 0xFF
+#define PLL_DIV_P_SHIFT 8
+#define PLL_DIV_P_MASK 0x7
+#define PLL_NORM_FDBK_M_SHIFT 24
+#define PLL_NORM_FDBK_M_MASK 0xFF
+#define PLL_DITH_FDBK_M_SHIFT 16
+#define PLL_DITH_FDBK_M_MASK 0xFFFF
+
+#define PLL2_MOD (MISC_BASE + 0x01C)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT 10
+#define PLL_HCLK_RATIO_MASK 0x3
+#define HCLK_PCLK_RATIO_SHIFT 8
+#define HCLK_PCLK_RATIO_MASK 0x3
+
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+/* PERIP_CLK_CFG register masks */
+#define CLCD_CLK_SHIFT 2
+#define CLCD_CLK_MASK 0x3
+#define UART_CLK_SHIFT 4
+#define UART_CLK_MASK 0x1
+#define FIRDA_CLK_SHIFT 5
+#define FIRDA_CLK_MASK 0x3
+#define GPT0_CLK_SHIFT 8
+#define GPT1_CLK_SHIFT 10
+#define GPT2_CLK_SHIFT 11
+#define GPT3_CLK_SHIFT 12
+#define GPT_CLK_MASK 0x1
+#define AUX_CLK_PLL3_VAL 0
+#define AUX_CLK_PLL1_VAL 1
+
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+/* PERIP1_CLK_ENB register masks */
+#define UART0_CLK_ENB 3
+#define UART1_CLK_ENB 4
+#define SSP0_CLK_ENB 5
+#define SSP1_CLK_ENB 6
+#define I2C_CLK_ENB 7
+#define JPEG_CLK_ENB 8
+#define FSMC_CLK_ENB 9
+#define FIRDA_CLK_ENB 10
+#define GPT2_CLK_ENB 11
+#define GPT3_CLK_ENB 12
+#define GPIO2_CLK_ENB 13
+#define SSP2_CLK_ENB 14
+#define ADC_CLK_ENB 15
+#define GPT1_CLK_ENB 11
+#define RTC_CLK_ENB 17
+#define GPIO1_CLK_ENB 18
+#define DMA_CLK_ENB 19
+#define SMI_CLK_ENB 21
+#define CLCD_CLK_ENB 22
+#define GMAC_CLK_ENB 23
+#define USBD_CLK_ENB 24
+#define USBH0_CLK_ENB 25
+#define USBH1_CLK_ENB 26
+
+#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT 0
+#define GPT_MSCALE_MASK 0xFFF
+#define GPT_NSCALE_SHIFT 12
+#define GPT_NSCALE_MASK 0xF
+
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+#define EXPI_CLK_CFG (MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB 31
+#define AUX_EQ_SEL_SHIFT 30
+#define AUX_EQ_SEL_MASK 1
+#define AUX_EQ1_SEL 0
+#define AUX_EQ2_SEL 1
+#define AUX_XSCALE_SHIFT 16
+#define AUX_XSCALE_MASK 0xFFF
+#define AUX_YSCALE_SHIFT 0
+#define AUX_YSCALE_MASK 0xFFF
/* root clks */
/* 32 KHz oscillator clock */
@@ -623,53 +729,53 @@
/* array of all spear 6xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
+ CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
/* root clks */
- { .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
- { .con_id = "osc_30m_clk", .clk = &osc_30m_clk},
+ CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
+ CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk),
/* clock derived from 32 KHz os clk */
- { .dev_id = "rtc-spear", .clk = &rtc_clk},
+ CLKDEV_INIT("rtc-spear", NULL, &rtc_clk),
/* clock derived from 30 MHz os clk */
- { .con_id = "pll1_clk", .clk = &pll1_clk},
- { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
- { .dev_id = "wdt", .clk = &wdt_clk},
+ CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
+ CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
+ CLKDEV_INIT("wdt", NULL, &wdt_clk),
/* clock derived from pll1 clk */
- { .con_id = "cpu_clk", .clk = &cpu_clk},
- { .con_id = "ahb_clk", .clk = &ahb_clk},
- { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
- { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
- { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk},
- { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
- { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
- { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk},
- { .dev_id = "d0000000.serial", .clk = &uart0_clk},
- { .dev_id = "d0080000.serial", .clk = &uart1_clk},
- { .dev_id = "firda", .clk = &firda_clk},
- { .dev_id = "clcd", .clk = &clcd_clk},
- { .dev_id = "gpt0", .clk = &gpt0_clk},
- { .dev_id = "gpt1", .clk = &gpt1_clk},
- { .dev_id = "gpt2", .clk = &gpt2_clk},
- { .dev_id = "gpt3", .clk = &gpt3_clk},
+ CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
+ CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
+ CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
+ CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
+ CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk),
+ CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
+ CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
+ CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk),
+ CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk),
+ CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk),
+ CLKDEV_INIT("firda", NULL, &firda_clk),
+ CLKDEV_INIT("clcd", NULL, &clcd_clk),
+ CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
+ CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
+ CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
+ CLKDEV_INIT("gpt3", NULL, &gpt3_clk),
/* clock derived from pll3 clk */
- { .dev_id = "designware_udc", .clk = &usbd_clk},
- { .con_id = "usbh.0_clk", .clk = &usbh0_clk},
- { .con_id = "usbh.1_clk", .clk = &usbh1_clk},
+ CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
+ CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
+ CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
/* clock derived from ahb clk */
- { .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "d0200000.i2c", .clk = &i2c_clk},
- { .dev_id = "dma", .clk = &dma_clk},
- { .dev_id = "jpeg", .clk = &jpeg_clk},
- { .dev_id = "gmac", .clk = &gmac_clk},
- { .dev_id = "smi", .clk = &smi_clk},
- { .dev_id = "fsmc-nand", .clk = &fsmc_clk},
+ CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
+ CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk),
+ CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
+ CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
+ CLKDEV_INIT("gmac", NULL, &gmac_clk),
+ CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
+ CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk),
/* clock derived from apb clk */
- { .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
- { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
- { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
- { .dev_id = "f0100000.gpio", .clk = &gpio0_clk},
- { .dev_id = "fc980000.gpio", .clk = &gpio1_clk},
- { .dev_id = "d8100000.gpio", .clk = &gpio2_clk},
+ CLKDEV_INIT("adc", NULL, &adc_clk),
+ CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk),
+ CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk),
+ CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk),
+ CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk),
+ CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk),
+ CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk),
};
void __init spear6xx_clk_init(void)
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 116b993..7167fd3 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -15,34 +15,9 @@
#define __MACH_GENERIC_H
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE SPEAR6XX_CPU_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2
-
-/* Add spear6xx family device structure declarations here */
-extern struct amba_device gpio_device[];
-extern struct amba_device uart_device[];
-extern struct sys_timer spear6xx_timer;
-
-/* Add spear6xx family function declarations here */
-void __init spear_setup_timer(void);
-void __init spear6xx_map_io(void);
-void __init spear6xx_init_irq(void);
-void __init spear6xx_init(void);
-void __init spear600_init(void);
-void __init spear6xx_clk_init(void);
-
+void __init spear_setup_timer(resource_size_t base, int irq);
void spear_restart(char, const char *);
-
-/* Add spear600 machine device structure declarations here */
+void __init spear6xx_clk_init(void);
#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h
index 0b3f96a..40a8c178 100644
--- a/arch/arm/mach-spear6xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear6xx/include/mach/hardware.h
@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x) (x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */
diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h
index 8f214b0..2b73538 100644
--- a/arch/arm/mach-spear6xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear6xx/include/mach/irqs.h
@@ -16,82 +16,13 @@
/* IRQ definitions */
/* VIC 1 */
-#define IRQ_INTRCOMM_SW_IRQ 0
-#define IRQ_INTRCOMM_CPU_1 1
-#define IRQ_INTRCOMM_CPU_2 2
-#define IRQ_INTRCOMM_RAS2A11_1 3
-#define IRQ_INTRCOMM_RAS2A11_2 4
-#define IRQ_INTRCOMM_RAS2A12_1 5
-#define IRQ_INTRCOMM_RAS2A12_2 6
-#define IRQ_GEN_RAS_0 7
-#define IRQ_GEN_RAS_1 8
-#define IRQ_GEN_RAS_2 9
-#define IRQ_GEN_RAS_3 10
-#define IRQ_GEN_RAS_4 11
-#define IRQ_GEN_RAS_5 12
-#define IRQ_GEN_RAS_6 13
-#define IRQ_GEN_RAS_7 14
-#define IRQ_GEN_RAS_8 15
+/* FIXME: probe this from DT */
#define IRQ_CPU_GPT1_1 16
-#define IRQ_CPU_GPT1_2 17
-#define IRQ_LOCAL_GPIO 18
-#define IRQ_PLL_UNLOCK 19
-#define IRQ_JPEG 20
-#define IRQ_FSMC 21
-#define IRQ_IRDA 22
-#define IRQ_RESERVED 23
-#define IRQ_UART_0 24
-#define IRQ_UART_1 25
-#define IRQ_SSP_1 26
-#define IRQ_SSP_2 27
-#define IRQ_I2C 28
-#define IRQ_GEN_RAS_9 29
-#define IRQ_GEN_RAS_10 30
-#define IRQ_GEN_RAS_11 31
-
-/* VIC 2 */
-#define IRQ_APPL_GPT1_1 32
-#define IRQ_APPL_GPT1_2 33
-#define IRQ_APPL_GPT2_1 34
-#define IRQ_APPL_GPT2_2 35
-#define IRQ_APPL_GPIO 36
-#define IRQ_APPL_SSP 37
-#define IRQ_APPL_ADC 38
-#define IRQ_APPL_RESERVED 39
-#define IRQ_AHB_EXP_MASTER 40
-#define IRQ_DDR_CONTROLLER 41
-#define IRQ_BASIC_DMA 42
-#define IRQ_BASIC_RESERVED1 43
-#define IRQ_BASIC_SMI 44
-#define IRQ_BASIC_CLCD 45
-#define IRQ_EXP_AHB_1 46
-#define IRQ_EXP_AHB_2 47
-#define IRQ_BASIC_GPT1_1 48
-#define IRQ_BASIC_GPT1_2 49
-#define IRQ_BASIC_RTC 50
-#define IRQ_BASIC_GPIO 51
-#define IRQ_BASIC_WDT 52
-#define IRQ_BASIC_RESERVED 53
-#define IRQ_AHB_EXP_SLAVE 54
-#define IRQ_GMAC_1 55
-#define IRQ_GMAC_2 56
-#define IRQ_USB_DEV 57
-#define IRQ_USB_H_OHCI_0 58
-#define IRQ_USB_H_EHCI_0 59
-#define IRQ_USB_H_OHCI_1 60
-#define IRQ_USB_H_EHCI_1 61
-#define IRQ_EXP_AHB_3 62
-#define IRQ_EXP_AHB_4 63
#define IRQ_VIC_END 64
/* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE IRQ_VIC_END
-#define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE
-#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8)
-#define SPEAR_GPIO2_INT_BASE (SPEAR_GPIO1_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END (SPEAR_GPIO2_INT_BASE + 8)
-#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END)
-#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS)
+#define VIRTUAL_IRQS 24
+#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS)
#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 68c20a0..2b9aaa6 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -14,161 +14,7 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/hardware.h>
-
#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR (MISC_BASE + 0x000)
-#define DIAG_CFG_CTR (MISC_BASE + 0x004)
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL1_MOD (MISC_BASE + 0x010)
-#define PLL2_CTR (MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE 2
-#define PLL_MODE_SHIFT 4
-#define PLL_MODE_MASK 0x3
-#define PLL_MODE_NORMAL 0
-#define PLL_MODE_FRACTION 1
-#define PLL_MODE_DITH_DSB 2
-#define PLL_MODE_DITH_SSB 3
-
-#define PLL2_FRQ (MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT 0
-#define PLL_DIV_N_MASK 0xFF
-#define PLL_DIV_P_SHIFT 8
-#define PLL_DIV_P_MASK 0x7
-#define PLL_NORM_FDBK_M_SHIFT 24
-#define PLL_NORM_FDBK_M_MASK 0xFF
-#define PLL_DITH_FDBK_M_SHIFT 16
-#define PLL_DITH_FDBK_M_MASK 0xFFFF
-
-#define PLL2_MOD (MISC_BASE + 0x01C)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT 10
-#define PLL_HCLK_RATIO_MASK 0x3
-#define HCLK_PCLK_RATIO_SHIFT 8
-#define HCLK_PCLK_RATIO_MASK 0x3
-
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT 2
-#define CLCD_CLK_MASK 0x3
-#define UART_CLK_SHIFT 4
-#define UART_CLK_MASK 0x1
-#define FIRDA_CLK_SHIFT 5
-#define FIRDA_CLK_MASK 0x3
-#define GPT0_CLK_SHIFT 8
-#define GPT1_CLK_SHIFT 10
-#define GPT2_CLK_SHIFT 11
-#define GPT3_CLK_SHIFT 12
-#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_VAL 0
-#define AUX_CLK_PLL1_VAL 1
-
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB 3
-#define UART1_CLK_ENB 4
-#define SSP0_CLK_ENB 5
-#define SSP1_CLK_ENB 6
-#define I2C_CLK_ENB 7
-#define JPEG_CLK_ENB 8
-#define FSMC_CLK_ENB 9
-#define FIRDA_CLK_ENB 10
-#define GPT2_CLK_ENB 11
-#define GPT3_CLK_ENB 12
-#define GPIO2_CLK_ENB 13
-#define SSP2_CLK_ENB 14
-#define ADC_CLK_ENB 15
-#define GPT1_CLK_ENB 11
-#define RTC_CLK_ENB 17
-#define GPIO1_CLK_ENB 18
-#define DMA_CLK_ENB 19
-#define SMI_CLK_ENB 21
-#define CLCD_CLK_ENB 22
-#define GMAC_CLK_ENB 23
-#define USBD_CLK_ENB 24
-#define USBH0_CLK_ENB 25
-#define USBH1_CLK_ENB 26
-
-#define SOC_CORE_ID (MISC_BASE + 0x030)
-#define RAS_CLK_ENB (MISC_BASE + 0x034)
-#define PERIP1_SOF_RST (MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST 8
-
-#define SOC_USER_ID (MISC_BASE + 0x03C)
-#define RAS_SOF_RST (MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT 0
-#define GPT_MSCALE_MASK 0xFFF
-#define GPT_NSCALE_SHIFT 12
-#define GPT_NSCALE_MASK 0xF
-
-#define AMEM_CLK_CFG (MISC_BASE + 0x050)
-#define EXPI_CLK_CFG (MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB 31
-#define AUX_EQ_SEL_SHIFT 30
-#define AUX_EQ_SEL_MASK 1
-#define AUX_EQ1_SEL 0
-#define AUX_EQ2_SEL 1
-#define AUX_XSCALE_SHIFT 16
-#define AUX_XSCALE_MASK 0xFFF
-#define AUX_YSCALE_SHIFT 0
-#define AUX_YSCALE_MASK 0xFFF
-
-#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG (MISC_BASE + 0x080)
-#define ICM3_ARB_CFG (MISC_BASE + 0x084)
-#define ICM4_ARB_CFG (MISC_BASE + 0x088)
-#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG (MISC_BASE + 0x090)
-#define ICM7_ARB_CFG (MISC_BASE + 0x094)
-#define ICM8_ARB_CFG (MISC_BASE + 0x098)
-#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR (MISC_BASE + 0x100)
-#define BIST5_CFG_CTR (MISC_BASE + 0x104)
-#define BIST1_STS_RES (MISC_BASE + 0x108)
-#define BIST2_STS_RES (MISC_BASE + 0x10C)
-#define BIST3_STS_RES (MISC_BASE + 0x110)
-#define BIST4_STS_RES (MISC_BASE + 0x114)
-#define BIST5_STS_RES (MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
index 7fd6215..d278ed0 100644
--- a/arch/arm/mach-spear6xx/include/mach/spear.h
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -15,69 +15,26 @@
#define __MACH_SPEAR6XX_H
#include <asm/memory.h>
-#include <mach/spear600.h>
-#define SPEAR6XX_ML_SDRAM_BASE UL(0x00000000)
/* ICM1 - Low speed connection */
#define SPEAR6XX_ICM1_BASE UL(0xD0000000)
-
+#define VA_SPEAR6XX_ICM1_BASE UL(0xFD000000)
#define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000)
-#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-
-#define SPEAR6XX_ICM1_UART1_BASE UL(0xD0080000)
-#define SPEAR6XX_ICM1_SSP0_BASE UL(0xD0100000)
-#define SPEAR6XX_ICM1_SSP1_BASE UL(0xD0180000)
-#define SPEAR6XX_ICM1_I2C_BASE UL(0xD0200000)
-#define SPEAR6XX_ICM1_JPEG_BASE UL(0xD0800000)
-#define SPEAR6XX_ICM1_IRDA_BASE UL(0xD1000000)
-#define SPEAR6XX_ICM1_FSMC_BASE UL(0xD1800000)
-#define SPEAR6XX_ICM1_NAND_BASE UL(0xD2000000)
-#define SPEAR6XX_ICM1_SRAM_BASE UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR0_BASE UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR1_BASE UL(0xD8080000)
-#define SPEAR6XX_ICM2_GPIO_BASE UL(0xD8100000)
-#define SPEAR6XX_ICM2_SSP2_BASE UL(0xD8180000)
-#define SPEAR6XX_ICM2_ADC_BASE UL(0xD8200000)
+#define VA_SPEAR6XX_ICM1_UART0_BASE (VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE)
/* ML-1, 2 - Multi Layer CPU Subsystem */
#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
+#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
#define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000)
-#define SPEAR6XX_CPU_GPIO_BASE UL(0xF0100000)
-#define SPEAR6XX_CPU_VIC_SEC_BASE UL(0xF1000000)
-#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_BASE UL(0xF1100000)
-#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
/* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE UL(0xF8000000)
-#define SPEAR6XX_ICM3_SMEM_BASE UL(0xF8000000)
#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
-#define SPEAR6XX_ICM3_CLCD_BASE UL(0xFC200000)
+#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000)
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
-#define SPEAR6XX_ICM3_TMR_BASE UL(0xFC800000)
-#define SPEAR6XX_ICM3_WDT_BASE UL(0xFC880000)
-#define SPEAR6XX_ICM3_RTC_BASE UL(0xFC900000)
-#define SPEAR6XX_ICM3_GPIO_BASE UL(0xFC980000)
#define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
-#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE)
#define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
-#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE UL(0xE0000000)
-#define SPEAR6XX_ICM4_GMAC_BASE UL(0xE0800000)
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
-#define SPEAR6XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE UL(0xE1800000)
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE UL(0xE2000000)
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
-#define SPEAR6XX_ICM4_USB_ARB_BASE UL(0xE2800000)
+#define VA_SPEAR6XX_ICM3_MISC_REG_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE
diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h
deleted file mode 100644
index c068cc5..0000000
--- a/arch/arm/mach-spear6xx/include/mach/spear600.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-spear66xx/include/mach/spear600.h
- *
- * SPEAr600 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef CONFIG_MACH_SPEAR600
-
-#ifndef __MACH_SPEAR600_H
-#define __MACH_SPEAR600_H
-
-#endif /* __MACH_SPEAR600_H */
-
-#endif /* CONFIG_MACH_SPEAR600 */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 2ed8b14..de194db 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -13,41 +13,404 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/amba/pl08x.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <asm/hardware/pl080.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <plat/pl080.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
-/* Following will create static virtual/physical mappings */
-static struct map_desc spear6xx_io_desc[] __initdata = {
+/* dmac device registration */
+static struct pl08x_channel_data spear600_dma_info[] = {
{
- .virtual = VA_SPEAR6XX_ICM1_UART0_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
- .length = SZ_4K,
+ .bus_id = "ssp1_rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp1_tx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart0_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart0_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart1_rx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart1_tx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp2_rx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ssp2_tx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ssp0_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "adc",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "to_jpeg",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "from_jpeg",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras0_rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras0_tx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras1_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras1_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras2_rx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras2_tx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras3_rx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras3_tx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras4_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras4_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ext0_rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext0_tx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext1_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext1_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext2_rx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext2_tx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext3_rx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext3_tx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext4_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext4_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext5_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext5_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext6_rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext6_tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext7_rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ext7_tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 2,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ },
+};
+
+struct pl08x_platform_data pl080_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_signal = pl080_get_signal,
+ .put_signal = pl080_put_signal,
+ .slave_channels = spear600_dma_info,
+ .num_slave_channels = ARRAY_SIZE(spear600_dma_info),
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL VIRTUAL
+ * 0xF0000000 0xF0000000
+ * 0xF1000000 0xF1000000
+ * 0xD0000000 0xFD000000
+ * 0xFC000000 0xFC000000
+ */
+struct map_desc spear6xx_io_desc[] __initdata = {
+ {
+ .virtual = VA_SPEAR6XX_ML_CPU_BASE,
+ .pfn = __phys_to_pfn(SPEAR6XX_ML_CPU_BASE),
+ .length = 2 * SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VA_SPEAR6XX_ICM1_BASE,
+ .pfn = __phys_to_pfn(SPEAR6XX_ICM1_BASE),
+ .length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
- .length = SZ_4K,
+ .virtual = VA_SPEAR6XX_ICM3_SMI_CTRL_BASE,
+ .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE),
+ .length = SZ_16M,
.type = MT_DEVICE
},
};
@@ -85,16 +448,24 @@
clk_put(gpt_clk);
clk_put(pclk);
- spear_setup_timer();
+ spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1);
}
struct sys_timer spear6xx_timer = {
.init = spear6xx_timer_init,
};
+/* Add auxdata to pass platform data */
+struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
+ &pl080_plat_data),
+ {}
+};
+
static void __init spear600_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table,
+ spear6xx_auxdata_lookup, NULL);
}
static const char *spear600_dt_board_compat[] = {
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 77d03c1..f815015 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -605,7 +605,6 @@
static struct platform_device *snowball_platform_devs[] __initdata = {
&snowball_led_dev,
&snowball_key_dev,
- &snowball_sbnet_dev,
&ab8500_device,
};
@@ -646,7 +645,6 @@
static void __init snowball_init_machine(void)
{
struct device *parent = NULL;
- int i2c0_devs;
int i;
parent = u8500_init_devices();
@@ -664,11 +662,6 @@
mop500_spi_init(parent);
mop500_uart_init(parent);
- i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
- i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
- i2c_register_board_info(2, mop500_i2c2_devices,
- ARRAY_SIZE(mop500_i2c2_devices));
-
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
@@ -753,9 +746,10 @@
{},
};
-static const struct of_device_id u8500_soc_node[] = {
+static const struct of_device_id u8500_local_bus_nodes[] = {
/* only create devices below soc node */
{ .compatible = "stericsson,db8500", },
+ { .compatible = "simple-bus"},
{ },
};
@@ -766,7 +760,6 @@
int i;
parent = u8500_init_devices();
- i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
@@ -774,7 +767,7 @@
snowball_platform_devs[i]->dev.parent = parent;
/* automatically probe child nodes of db8500 device */
- of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);
+ of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
if (of_machine_is_compatible("st-ericsson,mop500")) {
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
@@ -784,6 +777,12 @@
ARRAY_SIZE(mop500_platform_devs));
mop500_sdi_init(parent);
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
snowball_pins_init();
platform_add_devices(snowball_platform_devs,
@@ -797,19 +796,21 @@
* instead.
*/
mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
hrefv60_pins_init();
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
hrefv60_sdi_init(parent);
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+ i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
}
mop500_i2c_init(parent);
- i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
- i2c_register_board_info(2, mop500_i2c2_devices,
- ARRAY_SIZE(mop500_i2c2_devices));
-
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 9bd8163..f44a12c 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -121,6 +121,12 @@
&db8500_prcmu_device,
};
+static struct platform_device *of_platform_devs[] __initdata = {
+ &u8500_dma40_device,
+ &db8500_pmu_device,
+ &db8500_prcmu_device,
+};
+
static resource_size_t __initdata db8500_gpio_base[] = {
U8500_GPIOBANK0_BASE,
U8500_GPIOBANK1_BASE,
@@ -199,10 +205,16 @@
platform_device_register_data(parent,
"cpufreq-u8500", -1, NULL, 0);
- for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
- platform_devs[i]->dev.parent = parent;
+ for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++)
+ of_platform_devs[i]->dev.parent = parent;
- platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+ /*
+ * Devices to be DT:ed:
+ * u8500_dma40_device = todo
+ * db8500_pmu_device = todo
+ * db8500_prcmu_device = todo
+ */
+ platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs));
return parent;
}
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index d37df98..885c742 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -8,6 +8,7 @@
#include <linux/errno.h>
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/smp_twd.h>
@@ -43,10 +44,17 @@
#define ux500_twd_init() do { } while(0)
#endif
+const static struct of_device_id prcmu_timer_of_match[] __initconst = {
+ { .compatible = "stericsson,db8500-prcmu-timer-4", },
+ { },
+};
+
static void __init ux500_timer_init(void)
{
void __iomem *mtu_timer_base;
void __iomem *prcmu_timer_base;
+ void __iomem *tmp_base;
+ struct device_node *np;
if (cpu_is_u5500()) {
mtu_timer_base = __io_address(U5500_MTU0_BASE);
@@ -58,6 +66,22 @@
ux500_unknown_soc();
}
+ /* TODO: Once MTU has been DT:ed place code above into else. */
+ if (of_have_populated_dt()) {
+ np = of_find_matching_node(NULL, prcmu_timer_of_match);
+ if (!np)
+ goto dt_fail;
+
+ tmp_base = of_iomap(np, 0);
+ if (!tmp_base)
+ goto dt_fail;
+
+ prcmu_timer_base = tmp_base;
+ }
+
+dt_fail:
+ /* Doing it the old fashioned way. */
+
/*
* Here we register the timerblocks active in the system.
* Localtimers (twd) is started when both cpu is up and running.
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 1bb3dbc..6c066fc 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -9,9 +9,10 @@
default ARCH_SPEAR3XX
config ARCH_SPEAR3XX
- bool "SPEAr3XX"
+ bool "ST SPEAr3xx with Device Tree"
select ARM_VIC
select CPU_ARM926T
+ select USE_OF
help
Supports for ARM's SPEAR3XX family
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index e0f2e5b..4af6258 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
#
# Common support
-obj-y := clock.o restart.o time.o
+obj-y := clock.o restart.o time.o pl080.o
obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 02b160a..ab3de72 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
.macro addruart, rp, rv, tmp
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h
deleted file mode 100644
index 70187d7..0000000
--- a/arch/arm/plat-spear/include/plat/hardware.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/hardware.h
- *
- * Hardware definitions for SPEAr
- *
- * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_HARDWARE_H
-#define __PLAT_HARDWARE_H
-
-#endif /* __PLAT_HARDWARE_H */
diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h
new file mode 100644
index 0000000..e14a3e4
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/pl080.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-spear/include/plat/pl080.h
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_PL080_H
+#define __PLAT_PL080_H
+
+struct pl08x_dma_chan;
+int pl080_get_signal(struct pl08x_dma_chan *ch);
+void pl080_put_signal(struct pl08x_dma_chan *ch);
+
+#endif /* __PLAT_PL080_H */
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 1bf8452..6dd455b 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -13,7 +13,7 @@
#include <linux/io.h>
#include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
#ifndef __PLAT_UNCOMPRESS_H
#define __PLAT_UNCOMPRESS_H
diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c
new file mode 100644
index 0000000..a56a067
--- /dev/null
+++ b/arch/arm/plat-spear/pl080.c
@@ -0,0 +1,80 @@
+/*
+ * arch/arm/plat-spear/pl080.c
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/bus.h>
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include <mach/misc_regs.h>
+
+static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
+
+struct {
+ unsigned char busy;
+ unsigned char val;
+} signals[16] = {{0, 0}, };
+
+int pl080_get_signal(struct pl08x_dma_chan *ch)
+{
+ const struct pl08x_channel_data *cd = ch->cd;
+ unsigned int signal = cd->min_signal, val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lock, flags);
+
+ /* Return if signal is already acquired by somebody else */
+ if (signals[signal].busy &&
+ (signals[signal].val != cd->muxval)) {
+ spin_unlock_irqrestore(&lock, flags);
+ return -EBUSY;
+ }
+
+ /* If acquiring for the first time, configure it */
+ if (!signals[signal].busy) {
+ val = readl(DMA_CHN_CFG);
+
+ /*
+ * Each request line has two bits in DMA_CHN_CFG register. To
+ * goto the bits of current request line, do left shift of
+ * value by 2 * signal number.
+ */
+ val &= ~(0x3 << (signal * 2));
+ val |= cd->muxval << (signal * 2);
+ writel(val, DMA_CHN_CFG);
+ }
+
+ signals[signal].busy++;
+ signals[signal].val = cd->muxval;
+ spin_unlock_irqrestore(&lock, flags);
+
+ return signal;
+}
+
+void pl080_put_signal(struct pl08x_dma_chan *ch)
+{
+ const struct pl08x_channel_data *cd = ch->cd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lock, flags);
+
+ /* if signal is not used */
+ if (!signals[cd->min_signal].busy)
+ BUG();
+
+ signals[cd->min_signal].busy--;
+
+ spin_unlock_irqrestore(&lock, flags);
+}
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index 16f203e..4471a23 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -13,7 +13,7 @@
#include <linux/io.h>
#include <asm/system_misc.h>
#include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
#include <mach/generic.h>
void spear_restart(char mode, const char *cmd)
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index abb5bde..a3164d1 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -15,14 +15,13 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/time.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
#include <mach/generic.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
/*
* We would use TIMER0 and TIMER1 as clockevent and clocksource.
@@ -175,7 +174,7 @@
.handler = spear_timer_interrupt
};
-static void __init spear_clockevent_init(void)
+static void __init spear_clockevent_init(int irq)
{
u32 tick_rate;
@@ -195,19 +194,19 @@
clockevents_register_device(&clkevt);
- setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
+ setup_irq(irq, &spear_timer_irq);
}
-void __init spear_setup_timer(void)
+void __init spear_setup_timer(resource_size_t base, int irq)
{
int ret;
- if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
+ if (!request_mem_region(base, SZ_1K, "gpt0")) {
pr_err("%s:cannot get IO addr\n", __func__);
return;
}
- gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
+ gpt_base = ioremap(base, SZ_1K);
if (!gpt_base) {
pr_err("%s:ioremap failed for gpt\n", __func__);
goto err_mem;
@@ -225,7 +224,7 @@
goto err_clk;
}
- spear_clockevent_init();
+ spear_clockevent_init(irq);
spear_clocksource_init();
return;
@@ -235,5 +234,5 @@
err_iomap:
iounmap(gpt_base);
err_mem:
- release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
+ release_mem_region(base, SZ_1K);
}
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 0689bf6..b2402eb 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -62,7 +62,7 @@
config HW_RANDOM_ATMEL
tristate "Atmel Random Number Generator support"
- depends on HW_RANDOM && ARCH_AT91SAM9G45
+ depends on HW_RANDOM && HAVE_CLK
default HW_RANDOM
---help---
This driver provides kernel-side support for the Random Number
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 04be9f8..99389d2 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -23,16 +23,61 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/of_i2c.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
+#define I2C_PNX_TIMEOUT_DEFAULT 10 /* msec */
+#define I2C_PNX_SPEED_KHZ_DEFAULT 100
+#define I2C_PNX_REGION_SIZE 0x100
-#define I2C_PNX_TIMEOUT 10 /* msec */
-#define I2C_PNX_SPEED_KHZ 100
-#define I2C_PNX_REGION_SIZE 0x100
+enum {
+ mstatus_tdi = 0x00000001,
+ mstatus_afi = 0x00000002,
+ mstatus_nai = 0x00000004,
+ mstatus_drmi = 0x00000008,
+ mstatus_active = 0x00000020,
+ mstatus_scl = 0x00000040,
+ mstatus_sda = 0x00000080,
+ mstatus_rff = 0x00000100,
+ mstatus_rfe = 0x00000200,
+ mstatus_tff = 0x00000400,
+ mstatus_tfe = 0x00000800,
+};
-static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
+enum {
+ mcntrl_tdie = 0x00000001,
+ mcntrl_afie = 0x00000002,
+ mcntrl_naie = 0x00000004,
+ mcntrl_drmie = 0x00000008,
+ mcntrl_daie = 0x00000020,
+ mcntrl_rffie = 0x00000040,
+ mcntrl_tffie = 0x00000080,
+ mcntrl_reset = 0x00000100,
+ mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+ rw_bit = 1 << 0,
+ start_bit = 1 << 8,
+ stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
+#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
+#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
+#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
+#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
+#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
+
+static inline int wait_timeout(struct i2c_pnx_algo_data *data)
{
+ long timeout = data->timeout;
while (timeout > 0 &&
(ioread32(I2C_REG_STS(data)) & mstatus_active)) {
mdelay(1);
@@ -41,8 +86,9 @@
return (timeout <= 0);
}
-static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
+static inline int wait_reset(struct i2c_pnx_algo_data *data)
{
+ long timeout = data->timeout;
while (timeout > 0 &&
(ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) {
mdelay(1);
@@ -54,7 +100,7 @@
static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
{
struct timer_list *timer = &alg_data->mif.timer;
- unsigned long expires = msecs_to_jiffies(I2C_PNX_TIMEOUT);
+ unsigned long expires = msecs_to_jiffies(alg_data->timeout);
if (expires <= 1)
expires = 2;
@@ -92,7 +138,7 @@
}
/* First, make sure bus is idle */
- if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
+ if (wait_timeout(alg_data)) {
/* Somebody else is monopolizing the bus */
dev_err(&alg_data->adapter.dev,
"%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n",
@@ -185,7 +231,7 @@
if (alg_data->mif.len == 0) {
if (alg_data->last) {
/* Wait until the STOP is seen. */
- if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+ if (wait_timeout(alg_data))
dev_err(&alg_data->adapter.dev,
"The bus is still active after timeout\n");
}
@@ -283,7 +329,7 @@
if (alg_data->mif.len == 0) {
if (alg_data->last)
/* Wait until the STOP is seen. */
- if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+ if (wait_timeout(alg_data))
dev_err(&alg_data->adapter.dev,
"The bus is still active after timeout\n");
@@ -399,7 +445,7 @@
ctl |= mcntrl_reset;
iowrite32(ctl, I2C_REG_CTL(alg_data));
- wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ wait_reset(alg_data);
alg_data->mif.ret = -EIO;
complete(&alg_data->mif.complete);
}
@@ -414,18 +460,18 @@
alg_data->adapter.name);
iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
I2C_REG_CTL(alg_data));
- wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ wait_reset(alg_data);
} else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) {
/* If there is data in the fifo's after transfer,
* flush fifo's by reset.
*/
iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
I2C_REG_CTL(alg_data));
- wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ wait_reset(alg_data);
} else if (stat & mstatus_nai) {
iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
I2C_REG_CTL(alg_data));
- wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ wait_reset(alg_data);
}
}
@@ -546,8 +592,7 @@
{
struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
- /* FIXME: shouldn't this be clk_disable? */
- clk_enable(alg_data->clk);
+ clk_disable(alg_data->clk);
return 0;
}
@@ -569,14 +614,8 @@
int ret = 0;
struct i2c_pnx_algo_data *alg_data;
unsigned long freq;
- struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
-
- if (!i2c_pnx || !i2c_pnx->name) {
- dev_err(&pdev->dev, "%s: no platform data supplied\n",
- __func__);
- ret = -EINVAL;
- goto out;
- }
+ struct resource *res;
+ u32 speed = I2C_PNX_SPEED_KHZ_DEFAULT * 1000;
alg_data = kzalloc(sizeof(*alg_data), GFP_KERNEL);
if (!alg_data) {
@@ -586,14 +625,27 @@
platform_set_drvdata(pdev, alg_data);
- strlcpy(alg_data->adapter.name, i2c_pnx->name,
- sizeof(alg_data->adapter.name));
alg_data->adapter.dev.parent = &pdev->dev;
alg_data->adapter.algo = &pnx_algorithm;
alg_data->adapter.algo_data = alg_data;
alg_data->adapter.nr = pdev->id;
- alg_data->i2c_pnx = i2c_pnx;
+ alg_data->timeout = I2C_PNX_TIMEOUT_DEFAULT;
+#ifdef CONFIG_OF
+ alg_data->adapter.dev.of_node = of_node_get(pdev->dev.of_node);
+ if (pdev->dev.of_node) {
+ of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &speed);
+ /*
+ * At this point, it is planned to add an OF timeout property.
+ * As soon as there is a consensus about how to call and handle
+ * this, sth. like the following can be put here:
+ *
+ * of_property_read_u32(pdev->dev.of_node, "timeout",
+ * &alg_data->timeout);
+ */
+ }
+#endif
alg_data->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(alg_data->clk)) {
ret = PTR_ERR(alg_data->clk);
@@ -604,17 +656,27 @@
alg_data->mif.timer.function = i2c_pnx_timeout;
alg_data->mif.timer.data = (unsigned long)alg_data;
+ snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name),
+ "%s", pdev->name);
+
/* Register I/O resource */
- if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE,
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Unable to get mem resource.\n");
+ ret = -EBUSY;
+ goto out_clkget;
+ }
+ if (!request_mem_region(res->start, I2C_PNX_REGION_SIZE,
pdev->name)) {
dev_err(&pdev->dev,
"I/O region 0x%08x for I2C already in use.\n",
- i2c_pnx->base);
- ret = -ENODEV;
+ res->start);
+ ret = -ENOMEM;
goto out_clkget;
}
- alg_data->ioaddr = ioremap(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+ alg_data->base = res->start;
+ alg_data->ioaddr = ioremap(res->start, I2C_PNX_REGION_SIZE);
if (!alg_data->ioaddr) {
dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
ret = -ENOMEM;
@@ -638,20 +700,25 @@
* the deglitching filter length.
*/
- tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+ tmp = (freq / speed) / 2 - 2;
if (tmp > 0x3FF)
tmp = 0x3FF;
iowrite32(tmp, I2C_REG_CKH(alg_data));
iowrite32(tmp, I2C_REG_CKL(alg_data));
iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
- if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) {
+ if (wait_reset(alg_data)) {
ret = -ENODEV;
goto out_clock;
}
init_completion(&alg_data->mif.complete);
- ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt,
+ alg_data->irq = platform_get_irq(pdev, 0);
+ if (alg_data->irq < 0) {
+ dev_err(&pdev->dev, "Failed to get IRQ from platform resource\n");
+ goto out_irq;
+ }
+ ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
0, pdev->name, alg_data);
if (ret)
goto out_clock;
@@ -663,39 +730,39 @@
goto out_irq;
}
+ of_i2c_register_devices(&alg_data->adapter);
+
dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
- alg_data->adapter.name, i2c_pnx->base, i2c_pnx->irq);
+ alg_data->adapter.name, res->start, alg_data->irq);
return 0;
out_irq:
- free_irq(i2c_pnx->irq, alg_data);
+ free_irq(alg_data->irq, alg_data);
out_clock:
clk_disable(alg_data->clk);
out_unmap:
iounmap(alg_data->ioaddr);
out_release:
- release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+ release_mem_region(res->start, I2C_PNX_REGION_SIZE);
out_clkget:
clk_put(alg_data->clk);
out_drvdata:
kfree(alg_data);
err_kzalloc:
platform_set_drvdata(pdev, NULL);
-out:
return ret;
}
static int __devexit i2c_pnx_remove(struct platform_device *pdev)
{
struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
- struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx;
- free_irq(i2c_pnx->irq, alg_data);
+ free_irq(alg_data->irq, alg_data);
i2c_del_adapter(&alg_data->adapter);
clk_disable(alg_data->clk);
iounmap(alg_data->ioaddr);
- release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+ release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
clk_put(alg_data->clk);
kfree(alg_data);
platform_set_drvdata(pdev, NULL);
@@ -703,10 +770,19 @@
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_pnx_of_match[] = {
+ { .compatible = "nxp,pnx-i2c" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, i2c_pnx_of_match);
+#endif
+
static struct platform_driver i2c_pnx_driver = {
.driver = {
.name = "pnx-i2c",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(i2c_pnx_of_match),
},
.probe = i2c_pnx_probe,
.remove = __devexit_p(i2c_pnx_remove),
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 2a21419..75838d7 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -489,10 +489,10 @@
config TOUCHSCREEN_ATMEL_TSADCC
tristate "Atmel Touchscreen Interface"
- depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on ARCH_AT91
help
Say Y here if you have a 4-wire touchscreen connected to the
- ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
+ ADC Controller on your Atmel SoC.
If unsure, say N.
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 6dfc26d..52deec0 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -40,6 +40,7 @@
#include <linux/skbuff.h>
#include <linux/phy.h>
#include <linux/dma-mapping.h>
+#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/types.h>
@@ -340,13 +341,17 @@
*/
#define LPC_POWERDOWN_MACAHB (1 << 31)
-/* Upon the upcoming introduction of device tree usage in LPC32xx,
- * lpc_phy_interface_mode() and use_iram_for_net() will be extended with a
- * device parameter for access to device tree information at runtime, instead
- * of defining the values at compile time
- */
-static inline phy_interface_t lpc_phy_interface_mode(void)
+static phy_interface_t lpc_phy_interface_mode(struct device *dev)
{
+ if (dev && dev->of_node) {
+ const char *mode = of_get_property(dev->of_node,
+ "phy-mode", NULL);
+ if (mode && !strcmp(mode, "mii"))
+ return PHY_INTERFACE_MODE_MII;
+ return PHY_INTERFACE_MODE_RMII;
+ }
+
+ /* non-DT */
#ifdef CONFIG_ARCH_LPC32XX_MII_SUPPORT
return PHY_INTERFACE_MODE_MII;
#else
@@ -354,12 +359,16 @@
#endif
}
-static inline int use_iram_for_net(void)
+static bool use_iram_for_net(struct device *dev)
{
+ if (dev && dev->of_node)
+ return of_property_read_bool(dev->of_node, "use-iram");
+
+ /* non-DT */
#ifdef CONFIG_ARCH_LPC32XX_IRAM_FOR_NET
- return 1;
+ return true;
#else
- return 0;
+ return false;
#endif
}
@@ -664,7 +673,7 @@
LPC_ENET_CLRT(pldat->net_base));
writel(LPC_IPGR_LOAD_PART2(0x12), LPC_ENET_IPGR(pldat->net_base));
- if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
+ if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
writel(LPC_COMMAND_PASSRUNTFRAME,
LPC_ENET_COMMAND(pldat->net_base));
else {
@@ -804,12 +813,13 @@
}
/* Attach to the PHY */
- if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
+ if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
netdev_info(ndev, "using MII interface\n");
else
netdev_info(ndev, "using RMII interface\n");
phydev = phy_connect(ndev, dev_name(&phydev->dev),
- &lpc_handle_link_change, 0, lpc_phy_interface_mode());
+ &lpc_handle_link_change, 0,
+ lpc_phy_interface_mode(&pldat->pdev->dev));
if (IS_ERR(phydev)) {
netdev_err(ndev, "Could not attach to PHY\n");
@@ -843,7 +853,7 @@
}
/* Setup MII mode */
- if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
+ if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
writel(LPC_COMMAND_PASSRUNTFRAME,
LPC_ENET_COMMAND(pldat->net_base));
else {
@@ -1315,18 +1325,26 @@
static int lpc_eth_drv_probe(struct platform_device *pdev)
{
struct resource *res;
- struct resource *dma_res;
struct net_device *ndev;
struct netdata_local *pldat;
struct phy_device *phydev;
dma_addr_t dma_handle;
int irq, ret;
+ u32 tmp;
+
+ /* Setup network interface for RMII or MII mode */
+ tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+ tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+ if (lpc_phy_interface_mode(&pdev->dev) == PHY_INTERFACE_MODE_MII)
+ tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS;
+ else
+ tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+ __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
/* Get platform resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
irq = platform_get_irq(pdev, 0);
- if ((!res) || (!dma_res) || (irq < 0) || (irq >= NR_IRQS)) {
+ if ((!res) || (irq < 0) || (irq >= NR_IRQS)) {
dev_err(&pdev->dev, "error getting resources.\n");
ret = -ENXIO;
goto err_exit;
@@ -1389,17 +1407,19 @@
sizeof(struct txrx_desc_t) + sizeof(struct rx_status_t));
pldat->dma_buff_base_v = 0;
- if (use_iram_for_net()) {
- dma_handle = dma_res->start;
+ if (use_iram_for_net(&pldat->pdev->dev)) {
+ dma_handle = LPC32XX_IRAM_BASE;
if (pldat->dma_buff_size <= lpc32xx_return_iram_size())
pldat->dma_buff_base_v =
- io_p2v(dma_res->start);
+ io_p2v(LPC32XX_IRAM_BASE);
else
netdev_err(ndev,
"IRAM not big enough for net buffers, using SDRAM instead.\n");
}
if (pldat->dma_buff_base_v == 0) {
+ pldat->pdev->dev.coherent_dma_mask = 0xFFFFFFFF;
+ pldat->pdev->dev.dma_mask = &pldat->pdev->dev.coherent_dma_mask;
pldat->dma_buff_size = PAGE_ALIGN(pldat->dma_buff_size);
/* Allocate a chunk of memory for the DMA ethernet buffers
@@ -1488,7 +1508,7 @@
platform_set_drvdata(pdev, NULL);
unregister_netdev(ndev);
err_out_dma_unmap:
- if (!use_iram_for_net() ||
+ if (!use_iram_for_net(&pldat->pdev->dev) ||
pldat->dma_buff_size > lpc32xx_return_iram_size())
dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size,
pldat->dma_buff_base_v,
@@ -1515,7 +1535,7 @@
unregister_netdev(ndev);
platform_set_drvdata(pdev, NULL);
- if (!use_iram_for_net() ||
+ if (!use_iram_for_net(&pldat->pdev->dev) ||
pldat->dma_buff_size > lpc32xx_return_iram_size())
dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size,
pldat->dma_buff_base_v,
@@ -1584,6 +1604,14 @@
}
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id lpc_eth_match[] = {
+ { .compatible = "nxp,lpc-eth" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lpc_eth_match);
+#endif
+
static struct platform_driver lpc_eth_driver = {
.probe = lpc_eth_drv_probe,
.remove = __devexit_p(lpc_eth_drv_remove),
@@ -1593,6 +1621,7 @@
#endif
.driver = {
.name = MODNAME,
+ .of_match_table = of_match_ptr(lpc_eth_match),
},
};
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 66d96f1..7e262a6 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -1,4 +1,5 @@
+#include <linux/device.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/module.h>
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 8c8377d..4161bfe 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -838,7 +838,7 @@
config RTC_DRV_AT91RM9200
tristate "AT91RM9200 or some AT91SAM9 RTC"
- depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on ARCH_AT91
help
Driver for the internal RTC (Realtime Clock) module found on
Atmel AT91RM9200's and some AT91SAM9 chips. On AT91SAM9 chips
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
index a87124d..1bc74af 100644
--- a/include/linux/i2c-pnx.h
+++ b/include/linux/i2c-pnx.h
@@ -29,14 +29,10 @@
struct i2c_pnx_mif mif;
int last;
struct clk *clk;
- struct i2c_pnx_data *i2c_pnx;
struct i2c_adapter adapter;
-};
-
-struct i2c_pnx_data {
- const char *name;
- u32 base;
- int irq;
+ phys_addr_t base;
+ int irq;
+ u32 timeout;
};
#endif /* __I2C_PNX_H__ */