| /* |
| * USB Networking Links |
| * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net> |
| * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz> |
| * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com> |
| * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> |
| * Copyright (c) 2002-2003 TiVo Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* |
| * This is a generic "USB networking" framework that works with several |
| * kinds of full and high speed networking devices: |
| * |
| * + USB host-to-host "network cables", used for IP-over-USB links. |
| * These are often used for Laplink style connectivity products. |
| * - AnchorChip 2720 |
| * - Belkin, eTEK (interops with Win32 drivers) |
| * - GeneSys GL620USB-A |
| * - NetChip 1080 (interoperates with NetChip Win32 drivers) |
| * - Prolific PL-2301/2302 (replaces "plusb" driver) |
| * - KC Technology KC2190 |
| * |
| * + Smart USB devices can support such links directly, using Internet |
| * standard protocols instead of proprietary host-to-device links. |
| * - Linux PDAs like iPaq, Yopy, and Zaurus |
| * - The BLOB boot loader (for diskless booting) |
| * - Linux "gadgets", perhaps using PXA-2xx or Net2280 controllers |
| * - Devices using EPSON's sample USB firmware |
| * - CDC-Ethernet class devices, such as many cable modems |
| * |
| * + Adapters to networks such as Ethernet. |
| * - AX8817X based USB 2.0 products |
| * |
| * Links to these devices can be bridged using Linux Ethernet bridging. |
| * With minor exceptions, these all use similar USB framing for network |
| * traffic, but need different protocols for control traffic. |
| * |
| * USB devices can implement their side of this protocol at the cost |
| * of two bulk endpoints; it's not restricted to "cable" applications. |
| * See the SA1110, Zaurus, or EPSON device/client support in this driver; |
| * slave/target drivers such as "usb-eth" (on most SA-1100 PDAs) or |
| * "g_ether" (in the Linux "gadget" framework) implement that behavior |
| * within devices. |
| * |
| * |
| * CHANGELOG: |
| * |
| * 13-sep-2000 experimental, new |
| * 10-oct-2000 usb_device_id table created. |
| * 28-oct-2000 misc fixes; mostly, discard more TTL-mangled rx packets. |
| * 01-nov-2000 usb_device_id table and probing api update by |
| * Adam J. Richter <adam@yggdrasil.com>. |
| * 18-dec-2000 (db) tx watchdog, "net1080" renaming to "usbnet", device_info |
| * and prolific support, isolate net1080-specific bits, cleanup. |
| * fix unlink_urbs oops in D3 PM resume code path. |
| * |
| * 02-feb-2001 (db) fix tx skb sharing, packet length, match_flags, ... |
| * 08-feb-2001 stubbed in "linuxdev", maybe the SA-1100 folk can use it; |
| * AnchorChips 2720 support (from spec) for testing; |
| * fix bit-ordering problem with ethernet multicast addr |
| * 19-feb-2001 Support for clearing halt conditions. SA1100 UDC support |
| * updates. Oleg Drokin (green@iXcelerator.com) |
| * 25-mar-2001 More SA-1100 updates, including workaround for ip problem |
| * expecting cleared skb->cb and framing change to match latest |
| * handhelds.org version (Oleg). Enable device IDs from the |
| * Win32 Belkin driver; other cleanups (db). |
| * 16-jul-2001 Bugfixes for uhci oops-on-unplug, Belkin support, various |
| * cleanups for problems not yet seen in the field. (db) |
| * 17-oct-2001 Handle "Advance USBNET" product, like Belkin/eTEK devices, |
| * from Ioannis Mavroukakis <i.mavroukakis@btinternet.com>; |
| * rx unlinks somehow weren't async; minor cleanup. |
| * 03-nov-2001 Merged GeneSys driver; original code from Jiun-Jie Huang |
| * <huangjj@genesyslogic.com.tw>, updated by Stanislav Brabec |
| * <utx@penguin.cz>. Made framing options (NetChip/GeneSys) |
| * tie mostly to (sub)driver info. Workaround some PL-2302 |
| * chips that seem to reject SET_INTERFACE requests. |
| * |
| * 06-apr-2002 Added ethtool support, based on a patch from Brad Hards. |
| * Level of diagnostics is more configurable; they use device |
| * location (usb_device->devpath) instead of address (2.5). |
| * For tx_fixup, memflags can't be NOIO. |
| * 07-may-2002 Generalize/cleanup keventd support, handling rx stalls (mostly |
| * for USB 2.0 TTs) and memory shortages (potential) too. (db) |
| * Use "locally assigned" IEEE802 address space. (Brad Hards) |
| * 18-oct-2002 Support for Zaurus (Pavel Machek), related cleanup (db). |
| * 14-dec-2002 Remove Zaurus-private crc32 code (Pavel); 2.5 oops fix, |
| * cleanups and stubbed PXA-250 support (db), fix for framing |
| * issues on Z, net1080, and gl620a (Toby Milne) |
| * |
| * 31-mar-2003 Use endpoint descriptors: high speed support, simpler sa1100 |
| * vs pxa25x, and CDC Ethernet. Throttle down log floods on |
| * disconnect; other cleanups. (db) Flush net1080 fifos |
| * after several sequential framing errors. (Johannes Erdfelt) |
| * 22-aug-2003 AX8817X support (Dave Hollis). |
| * 14-jun-2004 Trivial patch for AX8817X based Buffalo LUA-U2-KTX in Japan |
| * (Neil Bortnak) |
| * 03-nov-2004 Trivial patch for KC2190 (KC-190) chip. (Jonathan McDowell) |
| * |
| * 01-feb-2005 AX88772 support (Phil Chang & Dave Hollis) |
| *-------------------------------------------------------------------------*/ |
| |
| // #define DEBUG // error path messages, extra info |
| // #define VERBOSE // more; success messages |
| |
| #include <linux/config.h> |
| #ifdef CONFIG_USB_DEBUG |
| # define DEBUG |
| #endif |
| #include <linux/module.h> |
| #include <linux/kmod.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/random.h> |
| #include <linux/ethtool.h> |
| #include <linux/workqueue.h> |
| #include <linux/mii.h> |
| #include <asm/uaccess.h> |
| #include <asm/unaligned.h> |
| #include <linux/usb.h> |
| #include <asm/io.h> |
| #include <asm/scatterlist.h> |
| #include <linux/mm.h> |
| #include <linux/dma-mapping.h> |
| |
| #define DRIVER_VERSION "03-Nov-2004" |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * Nineteen USB 1.1 max size bulk transactions per frame (ms), max. |
| * Several dozen bytes of IPv4 data can fit in two such transactions. |
| * One maximum size Ethernet packet takes twenty four of them. |
| * For high speed, each frame comfortably fits almost 36 max size |
| * Ethernet packets (so queues should be bigger). |
| */ |
| #define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4) |
| #define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4) |
| |
| // packets are always ethernet inside |
| // ... except they can be bigger (limit of 64K with NetChip framing) |
| #define MIN_PACKET sizeof(struct ethhdr) |
| #define MAX_PACKET 32768 |
| |
| // reawaken network queue this soon after stopping; else watchdog barks |
| #define TX_TIMEOUT_JIFFIES (5*HZ) |
| |
| // throttle rx/tx briefly after some faults, so khubd might disconnect() |
| // us (it polls at HZ/4 usually) before we report too many false errors. |
| #define THROTTLE_JIFFIES (HZ/8) |
| |
| // for vendor-specific control operations |
| #define CONTROL_TIMEOUT_MS 500 |
| |
| // between wakeups |
| #define UNLINK_TIMEOUT_MS 3 |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| // randomly generated ethernet address |
| static u8 node_id [ETH_ALEN]; |
| |
| // state we keep for each device we handle |
| struct usbnet { |
| // housekeeping |
| struct usb_device *udev; |
| struct driver_info *driver_info; |
| wait_queue_head_t *wait; |
| |
| // i/o info: pipes etc |
| unsigned in, out; |
| struct usb_host_endpoint *status; |
| unsigned maxpacket; |
| struct timer_list delay; |
| |
| // protocol/interface state |
| struct net_device *net; |
| struct net_device_stats stats; |
| int msg_enable; |
| unsigned long data [5]; |
| |
| struct mii_if_info mii; |
| |
| // various kinds of pending driver work |
| struct sk_buff_head rxq; |
| struct sk_buff_head txq; |
| struct sk_buff_head done; |
| struct urb *interrupt; |
| struct tasklet_struct bh; |
| |
| struct work_struct kevent; |
| unsigned long flags; |
| # define EVENT_TX_HALT 0 |
| # define EVENT_RX_HALT 1 |
| # define EVENT_RX_MEMORY 2 |
| # define EVENT_STS_SPLIT 3 |
| # define EVENT_LINK_RESET 4 |
| }; |
| |
| // device-specific info used by the driver |
| struct driver_info { |
| char *description; |
| |
| int flags; |
| /* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */ |
| #define FLAG_FRAMING_NC 0x0001 /* guard against device dropouts */ |
| #define FLAG_FRAMING_GL 0x0002 /* genelink batches packets */ |
| #define FLAG_FRAMING_Z 0x0004 /* zaurus adds a trailer */ |
| #define FLAG_FRAMING_RN 0x0008 /* RNDIS batches, plus huge header */ |
| |
| #define FLAG_NO_SETINT 0x0010 /* device can't set_interface() */ |
| #define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */ |
| |
| #define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */ |
| |
| /* init device ... can sleep, or cause probe() failure */ |
| int (*bind)(struct usbnet *, struct usb_interface *); |
| |
| /* cleanup device ... can sleep, but can't fail */ |
| void (*unbind)(struct usbnet *, struct usb_interface *); |
| |
| /* reset device ... can sleep */ |
| int (*reset)(struct usbnet *); |
| |
| /* see if peer is connected ... can sleep */ |
| int (*check_connect)(struct usbnet *); |
| |
| /* for status polling */ |
| void (*status)(struct usbnet *, struct urb *); |
| |
| /* link reset handling, called from defer_kevent */ |
| int (*link_reset)(struct usbnet *); |
| |
| /* fixup rx packet (strip framing) */ |
| int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb); |
| |
| /* fixup tx packet (add framing) */ |
| struct sk_buff *(*tx_fixup)(struct usbnet *dev, |
| struct sk_buff *skb, int flags); |
| |
| // FIXME -- also an interrupt mechanism |
| // useful for at least PL2301/2302 and GL620USB-A |
| // and CDC use them to report 'is it connected' changes |
| |
| /* for new devices, use the descriptor-reading code instead */ |
| int in; /* rx endpoint */ |
| int out; /* tx endpoint */ |
| |
| unsigned long data; /* Misc driver specific data */ |
| }; |
| |
| // we record the state for each of our queued skbs |
| enum skb_state { |
| illegal = 0, |
| tx_start, tx_done, |
| rx_start, rx_done, rx_cleanup |
| }; |
| |
| struct skb_data { // skb->cb is one of these |
| struct urb *urb; |
| struct usbnet *dev; |
| enum skb_state state; |
| size_t length; |
| }; |
| |
| static const char driver_name [] = "usbnet"; |
| |
| /* use ethtool to change the level for any given device */ |
| static int msg_level = -1; |
| module_param (msg_level, int, 0); |
| MODULE_PARM_DESC (msg_level, "Override default message level"); |
| |
| |
| #ifdef DEBUG |
| #define devdbg(usbnet, fmt, arg...) \ |
| printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg) |
| #else |
| #define devdbg(usbnet, fmt, arg...) do {} while(0) |
| #endif |
| |
| #define deverr(usbnet, fmt, arg...) \ |
| printk(KERN_ERR "%s: " fmt "\n" , (usbnet)->net->name , ## arg) |
| #define devwarn(usbnet, fmt, arg...) \ |
| printk(KERN_WARNING "%s: " fmt "\n" , (usbnet)->net->name , ## arg) |
| |
| #define devinfo(usbnet, fmt, arg...) \ |
| printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *); |
| static u32 usbnet_get_link (struct net_device *); |
| static u32 usbnet_get_msglevel (struct net_device *); |
| static void usbnet_set_msglevel (struct net_device *, u32); |
| static void defer_kevent (struct usbnet *, int); |
| |
| /* mostly for PDA style devices, which are always connected if present */ |
| static int always_connected (struct usbnet *dev) |
| { |
| return 0; |
| } |
| |
| /* handles CDC Ethernet and many other network "bulk data" interfaces */ |
| static int |
| get_endpoints (struct usbnet *dev, struct usb_interface *intf) |
| { |
| int tmp; |
| struct usb_host_interface *alt = NULL; |
| struct usb_host_endpoint *in = NULL, *out = NULL; |
| struct usb_host_endpoint *status = NULL; |
| |
| for (tmp = 0; tmp < intf->num_altsetting; tmp++) { |
| unsigned ep; |
| |
| in = out = status = NULL; |
| alt = intf->altsetting + tmp; |
| |
| /* take the first altsetting with in-bulk + out-bulk; |
| * remember any status endpoint, just in case; |
| * ignore other endpoints and altsetttings. |
| */ |
| for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { |
| struct usb_host_endpoint *e; |
| int intr = 0; |
| |
| e = alt->endpoint + ep; |
| switch (e->desc.bmAttributes) { |
| case USB_ENDPOINT_XFER_INT: |
| if (!(e->desc.bEndpointAddress & USB_DIR_IN)) |
| continue; |
| intr = 1; |
| /* FALLTHROUGH */ |
| case USB_ENDPOINT_XFER_BULK: |
| break; |
| default: |
| continue; |
| } |
| if (e->desc.bEndpointAddress & USB_DIR_IN) { |
| if (!intr && !in) |
| in = e; |
| else if (intr && !status) |
| status = e; |
| } else { |
| if (!out) |
| out = e; |
| } |
| } |
| if (in && out) |
| break; |
| } |
| if (!alt || !in || !out) |
| return -EINVAL; |
| |
| if (alt->desc.bAlternateSetting != 0 |
| || !(dev->driver_info->flags & FLAG_NO_SETINT)) { |
| tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber, |
| alt->desc.bAlternateSetting); |
| if (tmp < 0) |
| return tmp; |
| } |
| |
| dev->in = usb_rcvbulkpipe (dev->udev, |
| in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); |
| dev->out = usb_sndbulkpipe (dev->udev, |
| out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); |
| dev->status = status; |
| return 0; |
| } |
| |
| static void intr_complete (struct urb *urb, struct pt_regs *regs); |
| |
| static int init_status (struct usbnet *dev, struct usb_interface *intf) |
| { |
| char *buf = NULL; |
| unsigned pipe = 0; |
| unsigned maxp; |
| unsigned period; |
| |
| if (!dev->driver_info->status) |
| return 0; |
| |
| pipe = usb_rcvintpipe (dev->udev, |
| dev->status->desc.bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK); |
| maxp = usb_maxpacket (dev->udev, pipe, 0); |
| |
| /* avoid 1 msec chatter: min 8 msec poll rate */ |
| period = max ((int) dev->status->desc.bInterval, |
| (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3); |
| |
| buf = kmalloc (maxp, SLAB_KERNEL); |
| if (buf) { |
| dev->interrupt = usb_alloc_urb (0, SLAB_KERNEL); |
| if (!dev->interrupt) { |
| kfree (buf); |
| return -ENOMEM; |
| } else { |
| usb_fill_int_urb(dev->interrupt, dev->udev, pipe, |
| buf, maxp, intr_complete, dev, period); |
| dev_dbg(&intf->dev, |
| "status ep%din, %d bytes period %d\n", |
| usb_pipeendpoint(pipe), maxp, period); |
| } |
| } |
| return 0; |
| } |
| |
| static void skb_return (struct usbnet *dev, struct sk_buff *skb) |
| { |
| int status; |
| |
| skb->dev = dev->net; |
| skb->protocol = eth_type_trans (skb, dev->net); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += skb->len; |
| |
| if (netif_msg_rx_status (dev)) |
| devdbg (dev, "< rx, len %zu, type 0x%x", |
| skb->len + sizeof (struct ethhdr), skb->protocol); |
| memset (skb->cb, 0, sizeof (struct skb_data)); |
| status = netif_rx (skb); |
| if (status != NET_RX_SUCCESS && netif_msg_rx_err (dev)) |
| devdbg (dev, "netif_rx status %d", status); |
| } |
| |
| |
| #ifdef CONFIG_USB_ALI_M5632 |
| #define HAVE_HARDWARE |
| |
| /*------------------------------------------------------------------------- |
| * |
| * ALi M5632 driver ... does high speed |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| static const struct driver_info ali_m5632_info = { |
| .description = "ALi M5632", |
| }; |
| |
| |
| #endif |
| |
| |
| #ifdef CONFIG_USB_AN2720 |
| #define HAVE_HARDWARE |
| |
| /*------------------------------------------------------------------------- |
| * |
| * AnchorChips 2720 driver ... http://www.cypress.com |
| * |
| * This doesn't seem to have a way to detect whether the peer is |
| * connected, or need any reset handshaking. It's got pretty big |
| * internal buffers (handles most of a frame's worth of data). |
| * Chip data sheets don't describe any vendor control messages. |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| static const struct driver_info an2720_info = { |
| .description = "AnchorChips/Cypress 2720", |
| // no reset available! |
| // no check_connect available! |
| |
| .in = 2, .out = 2, // direction distinguishes these |
| }; |
| |
| #endif /* CONFIG_USB_AN2720 */ |
| |
| |
| #ifdef CONFIG_USB_AX8817X |
| /* ASIX AX8817X based USB 2.0 Ethernet Devices */ |
| |
| #define HAVE_HARDWARE |
| #define NEED_MII |
| |
| #include <linux/crc32.h> |
| |
| #define AX_CMD_SET_SW_MII 0x06 |
| #define AX_CMD_READ_MII_REG 0x07 |
| #define AX_CMD_WRITE_MII_REG 0x08 |
| #define AX_CMD_SET_HW_MII 0x0a |
| #define AX_CMD_READ_EEPROM 0x0b |
| #define AX_CMD_WRITE_EEPROM 0x0c |
| #define AX_CMD_WRITE_ENABLE 0x0d |
| #define AX_CMD_WRITE_DISABLE 0x0e |
| #define AX_CMD_WRITE_RX_CTL 0x10 |
| #define AX_CMD_READ_IPG012 0x11 |
| #define AX_CMD_WRITE_IPG0 0x12 |
| #define AX_CMD_WRITE_IPG1 0x13 |
| #define AX_CMD_WRITE_IPG2 0x14 |
| #define AX_CMD_WRITE_MULTI_FILTER 0x16 |
| #define AX_CMD_READ_NODE_ID 0x17 |
| #define AX_CMD_READ_PHY_ID 0x19 |
| #define AX_CMD_READ_MEDIUM_STATUS 0x1a |
| #define AX_CMD_WRITE_MEDIUM_MODE 0x1b |
| #define AX_CMD_READ_MONITOR_MODE 0x1c |
| #define AX_CMD_WRITE_MONITOR_MODE 0x1d |
| #define AX_CMD_WRITE_GPIOS 0x1f |
| #define AX_CMD_SW_RESET 0x20 |
| #define AX_CMD_SW_PHY_STATUS 0x21 |
| #define AX_CMD_SW_PHY_SELECT 0x22 |
| #define AX88772_CMD_READ_NODE_ID 0x13 |
| |
| #define AX_MONITOR_MODE 0x01 |
| #define AX_MONITOR_LINK 0x02 |
| #define AX_MONITOR_MAGIC 0x04 |
| #define AX_MONITOR_HSFS 0x10 |
| |
| /* AX88172 Medium Status Register values */ |
| #define AX_MEDIUM_FULL_DUPLEX 0x02 |
| #define AX_MEDIUM_TX_ABORT_ALLOW 0x04 |
| #define AX_MEDIUM_FLOW_CONTROL_EN 0x10 |
| |
| #define AX_MCAST_FILTER_SIZE 8 |
| #define AX_MAX_MCAST 64 |
| |
| #define AX_EEPROM_LEN 0x40 |
| |
| #define AX_SWRESET_CLEAR 0x00 |
| #define AX_SWRESET_RR 0x01 |
| #define AX_SWRESET_RT 0x02 |
| #define AX_SWRESET_PRTE 0x04 |
| #define AX_SWRESET_PRL 0x08 |
| #define AX_SWRESET_BZ 0x10 |
| #define AX_SWRESET_IPRL 0x20 |
| #define AX_SWRESET_IPPD 0x40 |
| |
| #define AX88772_IPG0_DEFAULT 0x15 |
| #define AX88772_IPG1_DEFAULT 0x0c |
| #define AX88772_IPG2_DEFAULT 0x12 |
| |
| #define AX88772_MEDIUM_FULL_DUPLEX 0x0002 |
| #define AX88772_MEDIUM_RESERVED 0x0004 |
| #define AX88772_MEDIUM_RX_FC_ENABLE 0x0010 |
| #define AX88772_MEDIUM_TX_FC_ENABLE 0x0020 |
| #define AX88772_MEDIUM_PAUSE_FORMAT 0x0080 |
| #define AX88772_MEDIUM_RX_ENABLE 0x0100 |
| #define AX88772_MEDIUM_100MB 0x0200 |
| #define AX88772_MEDIUM_DEFAULT \ |
| (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \ |
| AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \ |
| AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE ) |
| |
| #define AX_EEPROM_MAGIC 0xdeadbeef |
| |
| /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ |
| struct ax8817x_data { |
| u8 multi_filter[AX_MCAST_FILTER_SIZE]; |
| }; |
| |
| struct ax88172_int_data { |
| u16 res1; |
| u8 link; |
| u16 res2; |
| u8 status; |
| u16 res3; |
| } __attribute__ ((packed)); |
| |
| static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| return usb_control_msg( |
| dev->udev, |
| usb_rcvctrlpipe(dev->udev, 0), |
| cmd, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| data, |
| size, |
| CONTROL_TIMEOUT_MS); |
| } |
| |
| static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| return usb_control_msg( |
| dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| cmd, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| data, |
| size, |
| CONTROL_TIMEOUT_MS); |
| } |
| |
| static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs) |
| { |
| struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; |
| |
| if (urb->status < 0) |
| printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d", |
| urb->status); |
| |
| kfree(req); |
| usb_free_urb(urb); |
| } |
| |
| static void ax8817x_status(struct usbnet *dev, struct urb *urb) |
| { |
| struct ax88172_int_data *event; |
| int link; |
| |
| if (urb->actual_length < 8) |
| return; |
| |
| event = urb->transfer_buffer; |
| link = event->link & 0x01; |
| if (netif_carrier_ok(dev->net) != link) { |
| if (link) { |
| netif_carrier_on(dev->net); |
| defer_kevent (dev, EVENT_LINK_RESET ); |
| } else |
| netif_carrier_off(dev->net); |
| devdbg(dev, "ax8817x - Link Status is: %d", link); |
| } |
| } |
| |
| static void ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| struct usb_ctrlrequest *req; |
| int status; |
| struct urb *urb; |
| |
| if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) { |
| devdbg(dev, "Error allocating URB in write_cmd_async!"); |
| return; |
| } |
| |
| if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) { |
| deverr(dev, "Failed to allocate memory for control request"); |
| usb_free_urb(urb); |
| return; |
| } |
| |
| req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; |
| req->bRequest = cmd; |
| req->wValue = cpu_to_le16(value); |
| req->wIndex = cpu_to_le16(index); |
| req->wLength = cpu_to_le16(size); |
| |
| usb_fill_control_urb(urb, dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| (void *)req, data, size, |
| ax8817x_async_cmd_callback, req); |
| |
| if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { |
| deverr(dev, "Error submitting the control message: status=%d", status); |
| kfree(req); |
| usb_free_urb(urb); |
| } |
| } |
| |
| static void ax8817x_set_multicast(struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct ax8817x_data *data = (struct ax8817x_data *)&dev->data; |
| u8 rx_ctl = 0x8c; |
| |
| if (net->flags & IFF_PROMISC) { |
| rx_ctl |= 0x01; |
| } else if (net->flags & IFF_ALLMULTI |
| || net->mc_count > AX_MAX_MCAST) { |
| rx_ctl |= 0x02; |
| } else if (net->mc_count == 0) { |
| /* just broadcast and directed */ |
| } else { |
| /* We use the 20 byte dev->data |
| * for our 8 byte filter buffer |
| * to avoid allocating memory that |
| * is tricky to free later */ |
| struct dev_mc_list *mc_list = net->mc_list; |
| u32 crc_bits; |
| int i; |
| |
| memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); |
| |
| /* Build the multicast hash filter. */ |
| for (i = 0; i < net->mc_count; i++) { |
| crc_bits = |
| ether_crc(ETH_ALEN, |
| mc_list->dmi_addr) >> 26; |
| data->multi_filter[crc_bits >> 3] |= |
| 1 << (crc_bits & 7); |
| mc_list = mc_list->next; |
| } |
| |
| ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, |
| AX_MCAST_FILTER_SIZE, data->multi_filter); |
| |
| rx_ctl |= 0x10; |
| } |
| |
| ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); |
| } |
| |
| static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u16 res; |
| u8 buf[1]; |
| |
| ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf); |
| ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, (u16 *)&res); |
| ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf); |
| |
| return res & 0xffff; |
| } |
| |
| static void ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u16 res = val; |
| u8 buf[1]; |
| |
| ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf); |
| ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, (u16 *)&res); |
| ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf); |
| } |
| |
| static int ax88172_link_reset(struct usbnet *dev) |
| { |
| u16 lpa; |
| u8 mode; |
| |
| mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN; |
| lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA); |
| if (lpa & LPA_DUPLEX) |
| mode |= AX_MEDIUM_FULL_DUPLEX; |
| ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); |
| |
| return 0; |
| } |
| |
| static void ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u8 opt; |
| |
| if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { |
| wolinfo->supported = 0; |
| wolinfo->wolopts = 0; |
| return; |
| } |
| wolinfo->supported = WAKE_PHY | WAKE_MAGIC; |
| wolinfo->wolopts = 0; |
| if (opt & AX_MONITOR_MODE) { |
| if (opt & AX_MONITOR_LINK) |
| wolinfo->wolopts |= WAKE_PHY; |
| if (opt & AX_MONITOR_MAGIC) |
| wolinfo->wolopts |= WAKE_MAGIC; |
| } |
| } |
| |
| static int ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u8 opt = 0; |
| u8 buf[1]; |
| |
| if (wolinfo->wolopts & WAKE_PHY) |
| opt |= AX_MONITOR_LINK; |
| if (wolinfo->wolopts & WAKE_MAGIC) |
| opt |= AX_MONITOR_MAGIC; |
| if (opt != 0) |
| opt |= AX_MONITOR_MODE; |
| |
| if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, |
| opt, 0, 0, &buf) < 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int ax8817x_get_eeprom_len(struct net_device *net) |
| { |
| return AX_EEPROM_LEN; |
| } |
| |
| static int ax8817x_get_eeprom(struct net_device *net, |
| struct ethtool_eeprom *eeprom, u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u16 *ebuf = (u16 *)data; |
| int i; |
| |
| /* Crude hack to ensure that we don't overwrite memory |
| * if an odd length is supplied |
| */ |
| if (eeprom->len % 2) |
| return -EINVAL; |
| |
| eeprom->magic = AX_EEPROM_MAGIC; |
| |
| /* ax8817x returns 2 bytes from eeprom on read */ |
| for (i=0; i < eeprom->len / 2; i++) { |
| if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM, |
| eeprom->offset + i, 0, 2, &ebuf[i]) < 0) |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void ax8817x_get_drvinfo (struct net_device *net, |
| struct ethtool_drvinfo *info) |
| { |
| /* Inherit standard device info */ |
| usbnet_get_drvinfo(net, info); |
| info->eedump_len = 0x3e; |
| } |
| |
| static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| return mii_ethtool_gset(&dev->mii,cmd); |
| } |
| |
| static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| return mii_ethtool_sset(&dev->mii,cmd); |
| } |
| |
| /* We need to override some ethtool_ops so we require our |
| own structure so we don't interfere with other usbnet |
| devices that may be connected at the same time. */ |
| static struct ethtool_ops ax8817x_ethtool_ops = { |
| .get_drvinfo = ax8817x_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| .get_wol = ax8817x_get_wol, |
| .set_wol = ax8817x_set_wol, |
| .get_eeprom_len = ax8817x_get_eeprom_len, |
| .get_eeprom = ax8817x_get_eeprom, |
| .get_settings = ax8817x_get_settings, |
| .set_settings = ax8817x_set_settings, |
| }; |
| |
| static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| int ret = 0; |
| void *buf; |
| int i; |
| unsigned long gpio_bits = dev->driver_info->data; |
| |
| get_endpoints(dev,intf); |
| |
| buf = kmalloc(ETH_ALEN, GFP_KERNEL); |
| if(!buf) { |
| ret = -ENOMEM; |
| goto out1; |
| } |
| |
| /* Toggle the GPIOs in a manufacturer/model specific way */ |
| for (i = 2; i >= 0; i--) { |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS, |
| (gpio_bits >> (i * 8)) & 0xff, 0, 0, |
| buf)) < 0) |
| goto out2; |
| msleep(5); |
| } |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x80, 0, 0, buf)) < 0) { |
| dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret); |
| goto out2; |
| } |
| |
| /* Get the MAC address */ |
| memset(buf, 0, ETH_ALEN); |
| if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, 6, buf)) < 0) { |
| dbg("read AX_CMD_READ_NODE_ID failed: %d", ret); |
| goto out2; |
| } |
| memcpy(dev->net->dev_addr, buf, ETH_ALEN); |
| |
| /* Get the PHY id */ |
| if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) { |
| dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret); |
| goto out2; |
| } else if (ret < 2) { |
| /* this should always return 2 bytes */ |
| dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x", ret); |
| ret = -EIO; |
| goto out2; |
| } |
| |
| /* Initialize MII structure */ |
| dev->mii.dev = dev->net; |
| dev->mii.mdio_read = ax8817x_mdio_read; |
| dev->mii.mdio_write = ax8817x_mdio_write; |
| dev->mii.phy_id_mask = 0x3f; |
| dev->mii.reg_num_mask = 0x1f; |
| dev->mii.phy_id = *((u8 *)buf + 1); |
| |
| dev->net->set_multicast_list = ax8817x_set_multicast; |
| dev->net->ethtool_ops = &ax8817x_ethtool_ops; |
| |
| ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); |
| ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, |
| ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); |
| mii_nway_restart(&dev->mii); |
| |
| return 0; |
| out2: |
| kfree(buf); |
| out1: |
| return ret; |
| } |
| |
| static struct ethtool_ops ax88772_ethtool_ops = { |
| .get_drvinfo = ax8817x_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| .get_wol = ax8817x_get_wol, |
| .set_wol = ax8817x_set_wol, |
| .get_eeprom_len = ax8817x_get_eeprom_len, |
| .get_eeprom = ax8817x_get_eeprom, |
| .get_settings = ax8817x_get_settings, |
| .set_settings = ax8817x_set_settings, |
| }; |
| |
| static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| int ret; |
| void *buf; |
| |
| get_endpoints(dev,intf); |
| |
| buf = kmalloc(6, GFP_KERNEL); |
| if(!buf) { |
| dbg ("Cannot allocate memory for buffer"); |
| ret = -ENOMEM; |
| goto out1; |
| } |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS, |
| 0x00B0, 0, 0, buf)) < 0) |
| goto out2; |
| |
| msleep(5); |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0x0001, 0, 0, buf)) < 0) { |
| dbg("Select PHY #1 failed: %d", ret); |
| goto out2; |
| } |
| |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD, 0, 0, buf)) < 0) { |
| dbg("Failed to power down internal PHY: %d", ret); |
| goto out2; |
| } |
| |
| msleep(150); |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR, 0, 0, buf)) < 0) { |
| dbg("Failed to perform software reset: %d", ret); |
| goto out2; |
| } |
| |
| msleep(150); |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) { |
| dbg("Failed to set Internal/External PHY reset control: %d", ret); |
| goto out2; |
| } |
| |
| msleep(150); |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0000, 0, 0, |
| buf)) < 0) { |
| dbg("Failed to reset RX_CTL: %d", ret); |
| goto out2; |
| } |
| |
| /* Get the MAC address */ |
| memset(buf, 0, ETH_ALEN); |
| if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf)) < 0) { |
| dbg("Failed to read MAC address: %d", ret); |
| goto out2; |
| } |
| memcpy(dev->net->dev_addr, buf, ETH_ALEN); |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, buf)) < 0) { |
| dbg("Enabling software MII failed: %d", ret); |
| goto out2; |
| } |
| |
| if (((ret = |
| ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, 0x0010, 2, 2, buf)) < 0) |
| || (*((u16 *)buf) != 0x003b)) { |
| dbg("Read PHY register 2 must be 0x3b00: %d", ret); |
| goto out2; |
| } |
| |
| /* Initialize MII structure */ |
| dev->mii.dev = dev->net; |
| dev->mii.mdio_read = ax8817x_mdio_read; |
| dev->mii.mdio_write = ax8817x_mdio_write; |
| dev->mii.phy_id_mask = 0xff; |
| dev->mii.reg_num_mask = 0xff; |
| |
| /* Get the PHY id */ |
| if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) { |
| dbg("Error reading PHY ID: %02x", ret); |
| goto out2; |
| } else if (ret < 2) { |
| /* this should always return 2 bytes */ |
| dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x", |
| ret); |
| ret = -EIO; |
| goto out2; |
| } |
| dev->mii.phy_id = *((u8 *)buf + 1); |
| |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL, 0, 0, buf)) < 0) { |
| dbg("Set external PHY reset pin level: %d", ret); |
| goto out2; |
| } |
| msleep(150); |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) { |
| dbg("Set Internal/External PHY reset control: %d", ret); |
| goto out2; |
| } |
| msleep(150); |
| |
| |
| dev->net->set_multicast_list = ax8817x_set_multicast; |
| dev->net->ethtool_ops = &ax88772_ethtool_ops; |
| |
| ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); |
| ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, |
| ADVERTISE_ALL | ADVERTISE_CSMA); |
| mii_nway_restart(&dev->mii); |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) { |
| dbg("Write medium mode register: %d", ret); |
| goto out2; |
| } |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0, AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,AX88772_IPG2_DEFAULT, 0, buf)) < 0) { |
| dbg("Write IPG,IPG1,IPG2 failed: %d", ret); |
| goto out2; |
| } |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) { |
| dbg("Failed to set hardware MII: %02x", ret); |
| goto out2; |
| } |
| |
| /* Set RX_CTL to default values with 2k buffer, and enable cactus */ |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0, |
| buf)) < 0) { |
| dbg("Reset RX_CTL failed: %d", ret); |
| goto out2; |
| } |
| |
| kfree(buf); |
| |
| return 0; |
| |
| out2: |
| kfree(buf); |
| out1: |
| return ret; |
| } |
| |
| static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| u32 *header; |
| char *packet; |
| struct sk_buff *ax_skb; |
| u16 size; |
| |
| header = (u32 *) skb->data; |
| le32_to_cpus(header); |
| packet = (char *)(header + 1); |
| |
| skb_pull(skb, 4); |
| |
| while (skb->len > 0) { |
| if ((short)(*header & 0x0000ffff) != |
| ~((short)((*header & 0xffff0000) >> 16))) { |
| devdbg(dev,"header length data is error"); |
| } |
| /* get the packet length */ |
| size = (u16) (*header & 0x0000ffff); |
| |
| if ((skb->len) - ((size + 1) & 0xfffe) == 0) |
| return 2; |
| if (size > ETH_FRAME_LEN) { |
| devdbg(dev,"invalid rx length %d", size); |
| return 0; |
| } |
| ax_skb = skb_clone(skb, GFP_ATOMIC); |
| if (ax_skb) { |
| ax_skb->len = size; |
| ax_skb->data = packet; |
| ax_skb->tail = packet + size; |
| skb_return(dev, ax_skb); |
| } else { |
| return 0; |
| } |
| |
| skb_pull(skb, (size + 1) & 0xfffe); |
| |
| if (skb->len == 0) |
| break; |
| |
| header = (u32 *) skb->data; |
| le32_to_cpus(header); |
| packet = (char *)(header + 1); |
| skb_pull(skb, 4); |
| } |
| |
| if (skb->len < 0) { |
| devdbg(dev,"invalid rx length %d", skb->len); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb, |
| int flags) |
| { |
| int padlen; |
| int headroom = skb_headroom(skb); |
| int tailroom = skb_tailroom(skb); |
| u32 *packet_len; |
| u32 *padbytes_ptr; |
| |
| padlen = ((skb->len + 4) % 512) ? 0 : 4; |
| |
| if ((!skb_cloned(skb)) |
| && ((headroom + tailroom) >= (4 + padlen))) { |
| if ((headroom < 4) || (tailroom < padlen)) { |
| skb->data = memmove(skb->head + 4, skb->data, skb->len); |
| skb->tail = skb->data + skb->len; |
| } |
| } else { |
| struct sk_buff *skb2; |
| skb2 = skb_copy_expand(skb, 4, padlen, flags); |
| dev_kfree_skb_any(skb); |
| skb = skb2; |
| if (!skb) |
| return NULL; |
| } |
| |
| packet_len = (u32 *) skb_push(skb, 4); |
| |
| packet_len = (u32 *) skb->data; |
| *packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4); |
| |
| if ((skb->len % 512) == 0) { |
| padbytes_ptr = (u32 *) skb->tail; |
| *padbytes_ptr = 0xffff0000; |
| skb_put(skb, padlen); |
| } |
| return skb; |
| } |
| |
| static int ax88772_link_reset(struct usbnet *dev) |
| { |
| u16 lpa; |
| u16 mode; |
| |
| mode = AX88772_MEDIUM_DEFAULT; |
| lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA); |
| |
| if ((lpa & LPA_DUPLEX) == 0) |
| mode &= ~AX88772_MEDIUM_FULL_DUPLEX; |
| if ((lpa & LPA_100) == 0) |
| mode &= ~AX88772_MEDIUM_100MB; |
| ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); |
| |
| return 0; |
| } |
| |
| static const struct driver_info ax8817x_info = { |
| .description = "ASIX AX8817x USB 2.0 Ethernet", |
| .bind = ax8817x_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88172_link_reset, |
| .reset = ax88172_link_reset, |
| .flags = FLAG_ETHER, |
| .data = 0x00130103, |
| }; |
| |
| static const struct driver_info dlink_dub_e100_info = { |
| .description = "DLink DUB-E100 USB Ethernet", |
| .bind = ax8817x_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88172_link_reset, |
| .reset = ax88172_link_reset, |
| .flags = FLAG_ETHER, |
| .data = 0x009f9d9f, |
| }; |
| |
| static const struct driver_info netgear_fa120_info = { |
| .description = "Netgear FA-120 USB Ethernet", |
| .bind = ax8817x_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88172_link_reset, |
| .reset = ax88172_link_reset, |
| .flags = FLAG_ETHER, |
| .data = 0x00130103, |
| }; |
| |
| static const struct driver_info hawking_uf200_info = { |
| .description = "Hawking UF200 USB Ethernet", |
| .bind = ax8817x_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88172_link_reset, |
| .reset = ax88172_link_reset, |
| .flags = FLAG_ETHER, |
| .data = 0x001f1d1f, |
| }; |
| |
| static const struct driver_info ax88772_info = { |
| .description = "ASIX AX88772 USB 2.0 Ethernet", |
| .bind = ax88772_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88772_link_reset, |
| .reset = ax88772_link_reset, |
| .flags = FLAG_ETHER | FLAG_FRAMING_AX, |
| .rx_fixup = ax88772_rx_fixup, |
| .tx_fixup = ax88772_tx_fixup, |
| .data = 0x00130103, |
| }; |
| |
| #endif /* CONFIG_USB_AX8817X */ |
| |
| |
| |
| #ifdef CONFIG_USB_BELKIN |
| #define HAVE_HARDWARE |
| |
| /*------------------------------------------------------------------------- |
| * |
| * Belkin F5U104 ... two NetChip 2280 devices + Atmel microcontroller |
| * |
| * ... also two eTEK designs, including one sold as "Advance USBNET" |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| static const struct driver_info belkin_info = { |
| .description = "Belkin, eTEK, or compatible", |
| }; |
| |
| #endif /* CONFIG_USB_BELKIN */ |
| |
| |
| |
| /*------------------------------------------------------------------------- |
| * |
| * Communications Device Class declarations. |
| * Used by CDC Ethernet, and some CDC variants |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| #ifdef CONFIG_USB_CDCETHER |
| #define NEED_GENERIC_CDC |
| #endif |
| |
| #ifdef CONFIG_USB_ZAURUS |
| /* Ethernet variant uses funky framing, broken ethernet addressing */ |
| #define NEED_GENERIC_CDC |
| #endif |
| |
| #ifdef CONFIG_USB_RNDIS |
| /* ACM variant uses even funkier framing, complex control RPC scheme */ |
| #define NEED_GENERIC_CDC |
| #endif |
| |
| |
| #ifdef NEED_GENERIC_CDC |
| |
| #include <linux/usb_cdc.h> |
| |
| struct cdc_state { |
| struct usb_cdc_header_desc *header; |
| struct usb_cdc_union_desc *u; |
| struct usb_cdc_ether_desc *ether; |
| struct usb_interface *control; |
| struct usb_interface *data; |
| }; |
| |
| static struct usb_driver usbnet_driver; |
| |
| /* |
| * probes control interface, claims data interface, collects the bulk |
| * endpoints, activates data interface (if needed), maybe sets MTU. |
| * all pure cdc, except for certain firmware workarounds. |
| */ |
| static int generic_cdc_bind (struct usbnet *dev, struct usb_interface *intf) |
| { |
| u8 *buf = intf->cur_altsetting->extra; |
| int len = intf->cur_altsetting->extralen; |
| struct usb_interface_descriptor *d; |
| struct cdc_state *info = (void *) &dev->data; |
| int status; |
| int rndis; |
| |
| if (sizeof dev->data < sizeof *info) |
| return -EDOM; |
| |
| /* expect strict spec conformance for the descriptors, but |
| * cope with firmware which stores them in the wrong place |
| */ |
| if (len == 0 && dev->udev->actconfig->extralen) { |
| /* Motorola SB4100 (and others: Brad Hards says it's |
| * from a Broadcom design) put CDC descriptors here |
| */ |
| buf = dev->udev->actconfig->extra; |
| len = dev->udev->actconfig->extralen; |
| if (len) |
| dev_dbg (&intf->dev, |
| "CDC descriptors on config\n"); |
| } |
| |
| /* this assumes that if there's a non-RNDIS vendor variant |
| * of cdc-acm, it'll fail RNDIS requests cleanly. |
| */ |
| rndis = (intf->cur_altsetting->desc.bInterfaceProtocol == 0xff); |
| |
| memset (info, 0, sizeof *info); |
| info->control = intf; |
| while (len > 3) { |
| if (buf [1] != USB_DT_CS_INTERFACE) |
| goto next_desc; |
| |
| /* use bDescriptorSubType to identify the CDC descriptors. |
| * We expect devices with CDC header and union descriptors. |
| * For CDC Ethernet we need the ethernet descriptor. |
| * For RNDIS, ignore two (pointless) CDC modem descriptors |
| * in favor of a complicated OID-based RPC scheme doing what |
| * CDC Ethernet achieves with a simple descriptor. |
| */ |
| switch (buf [2]) { |
| case USB_CDC_HEADER_TYPE: |
| if (info->header) { |
| dev_dbg (&intf->dev, "extra CDC header\n"); |
| goto bad_desc; |
| } |
| info->header = (void *) buf; |
| if (info->header->bLength != sizeof *info->header) { |
| dev_dbg (&intf->dev, "CDC header len %u\n", |
| info->header->bLength); |
| goto bad_desc; |
| } |
| break; |
| case USB_CDC_UNION_TYPE: |
| if (info->u) { |
| dev_dbg (&intf->dev, "extra CDC union\n"); |
| goto bad_desc; |
| } |
| info->u = (void *) buf; |
| if (info->u->bLength != sizeof *info->u) { |
| dev_dbg (&intf->dev, "CDC union len %u\n", |
| info->u->bLength); |
| goto bad_desc; |
| } |
| |
| /* we need a master/control interface (what we're |
| * probed with) and a slave/data interface; union |
| * descriptors sort this all out. |
| */ |
| info->control = usb_ifnum_to_if(dev->udev, |
| info->u->bMasterInterface0); |
| info->data = usb_ifnum_to_if(dev->udev, |
| info->u->bSlaveInterface0); |
| if (!info->control || !info->data) { |
| dev_dbg (&intf->dev, |
| "master #%u/%p slave #%u/%p\n", |
| info->u->bMasterInterface0, |
| info->control, |
| info->u->bSlaveInterface0, |
| info->data); |
| goto bad_desc; |
| } |
| if (info->control != intf) { |
| dev_dbg (&intf->dev, "bogus CDC Union\n"); |
| /* Ambit USB Cable Modem (and maybe others) |
| * interchanges master and slave interface. |
| */ |
| if (info->data == intf) { |
| info->data = info->control; |
| info->control = intf; |
| } else |
| goto bad_desc; |
| } |
| |
| /* a data interface altsetting does the real i/o */ |
| d = &info->data->cur_altsetting->desc; |
| if (d->bInterfaceClass != USB_CLASS_CDC_DATA) { |
| dev_dbg (&intf->dev, "slave class %u\n", |
| d->bInterfaceClass); |
| goto bad_desc; |
| } |
| break; |
| case USB_CDC_ETHERNET_TYPE: |
| if (info->ether) { |
| dev_dbg (&intf->dev, "extra CDC ether\n"); |
| goto bad_desc; |
| } |
| info->ether = (void *) buf; |
| if (info->ether->bLength != sizeof *info->ether) { |
| dev_dbg (&intf->dev, "CDC ether len %u\n", |
| info->ether->bLength); |
| goto bad_desc; |
| } |
| dev->net->mtu = le16_to_cpup ( |
| &info->ether->wMaxSegmentSize) |
| - ETH_HLEN; |
| /* because of Zaurus, we may be ignoring the host |
| * side link address we were given. |
| */ |
| break; |
| } |
| next_desc: |
| len -= buf [0]; /* bLength */ |
| buf += buf [0]; |
| } |
| |
| if (!info->header || !info->u || (!rndis && !info->ether)) { |
| dev_dbg (&intf->dev, "missing cdc %s%s%sdescriptor\n", |
| info->header ? "" : "header ", |
| info->u ? "" : "union ", |
| info->ether ? "" : "ether "); |
| goto bad_desc; |
| } |
| |
| /* claim data interface and set it up ... with side effects. |
| * network traffic can't flow until an altsetting is enabled. |
| */ |
| status = usb_driver_claim_interface (&usbnet_driver, info->data, dev); |
| if (status < 0) |
| return status; |
| status = get_endpoints (dev, info->data); |
| if (status < 0) { |
| /* ensure immediate exit from usbnet_disconnect */ |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface (&usbnet_driver, info->data); |
| return status; |
| } |
| |
| /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */ |
| dev->status = NULL; |
| if (info->control->cur_altsetting->desc.bNumEndpoints == 1) { |
| struct usb_endpoint_descriptor *desc; |
| |
| dev->status = &info->control->cur_altsetting->endpoint [0]; |
| desc = &dev->status->desc; |
| if (desc->bmAttributes != USB_ENDPOINT_XFER_INT |
| || !(desc->bEndpointAddress & USB_DIR_IN) |
| || (le16_to_cpu(desc->wMaxPacketSize) |
| < sizeof (struct usb_cdc_notification)) |
| || !desc->bInterval) { |
| dev_dbg (&intf->dev, "bad notification endpoint\n"); |
| dev->status = NULL; |
| } |
| } |
| if (rndis && !dev->status) { |
| dev_dbg (&intf->dev, "missing RNDIS status endpoint\n"); |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface (&usbnet_driver, info->data); |
| return -ENODEV; |
| } |
| return 0; |
| |
| bad_desc: |
| dev_info (&dev->udev->dev, "bad CDC descriptors\n"); |
| return -ENODEV; |
| } |
| |
| static void cdc_unbind (struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct cdc_state *info = (void *) &dev->data; |
| |
| /* disconnect master --> disconnect slave */ |
| if (intf == info->control && info->data) { |
| /* ensure immediate exit from usbnet_disconnect */ |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface (&usbnet_driver, info->data); |
| info->data = NULL; |
| } |
| |
| /* and vice versa (just in case) */ |
| else if (intf == info->data && info->control) { |
| /* ensure immediate exit from usbnet_disconnect */ |
| usb_set_intfdata(info->control, NULL); |
| usb_driver_release_interface (&usbnet_driver, info->control); |
| info->control = NULL; |
| } |
| } |
| |
| #endif /* NEED_GENERIC_CDC */ |
| |
| |
| #ifdef CONFIG_USB_CDCETHER |
| #define HAVE_HARDWARE |
| |
| /*------------------------------------------------------------------------- |
| * |
| * Communications Device Class, Ethernet Control model |
| * |
| * Takes two interfaces. The DATA interface is inactive till an altsetting |
| * is selected. Configuration data includes class descriptors. |
| * |
| * This should interop with whatever the 2.4 "CDCEther.c" driver |
| * (by Brad Hards) talked with. |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| #include <linux/ctype.h> |
| |
| |
| static void dumpspeed (struct usbnet *dev, __le32 *speeds) |
| { |
| if (netif_msg_timer (dev)) |
| devinfo (dev, "link speeds: %u kbps up, %u kbps down", |
| __le32_to_cpu(speeds[0]) / 1000, |
| __le32_to_cpu(speeds[1]) / 1000); |
| } |
| |
| static void cdc_status (struct usbnet *dev, struct urb *urb) |
| { |
| struct usb_cdc_notification *event; |
| |
| if (urb->actual_length < sizeof *event) |
| return; |
| |
| /* SPEED_CHANGE can get split into two 8-byte packets */ |
| if (test_and_clear_bit (EVENT_STS_SPLIT, &dev->flags)) { |
| dumpspeed (dev, (__le32 *) urb->transfer_buffer); |
| return; |
| } |
| |
| event = urb->transfer_buffer; |
| switch (event->bNotificationType) { |
| case USB_CDC_NOTIFY_NETWORK_CONNECTION: |
| if (netif_msg_timer (dev)) |
| devdbg (dev, "CDC: carrier %s", |
| event->wValue ? "on" : "off"); |
| if (event->wValue) |
| netif_carrier_on(dev->net); |
| else |
| netif_carrier_off(dev->net); |
| break; |
| case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */ |
| if (netif_msg_timer (dev)) |
| devdbg (dev, "CDC: speed change (len %d)", |
| urb->actual_length); |
| if (urb->actual_length != (sizeof *event + 8)) |
| set_bit (EVENT_STS_SPLIT, &dev->flags); |
| else |
| dumpspeed (dev, (__le32 *) &event[1]); |
| break; |
| // case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: /* RNDIS; or unsolicited */ |
| default: |
| deverr (dev, "CDC: unexpected notification %02x!", |
| event->bNotificationType); |
| break; |
| } |
| } |
| |
| static u8 nibble (unsigned char c) |
| { |
| if (likely (isdigit (c))) |
| return c - '0'; |
| c = toupper (c); |
| if (likely (isxdigit (c))) |
| return 10 + c - 'A'; |
| return 0; |
| } |
| |
| static inline int |
| get_ethernet_addr (struct usbnet *dev, struct usb_cdc_ether_desc *e) |
| { |
| int tmp, i; |
| unsigned char buf [13]; |
| |
| tmp = usb_string (dev->udev, e->iMACAddress, buf, sizeof buf); |
| if (tmp != 12) { |
| dev_dbg (&dev->udev->dev, |
| "bad MAC string %d fetch, %d\n", e->iMACAddress, tmp); |
| if (tmp >= 0) |
| tmp = -EINVAL; |
| return tmp; |
| } |
| for (i = tmp = 0; i < 6; i++, tmp += 2) |
| dev->net->dev_addr [i] = |
| (nibble (buf [tmp]) << 4) + nibble (buf [tmp + 1]); |
| return 0; |
| } |
| |
| static int cdc_bind (struct usbnet *dev, struct usb_interface *intf) |
| { |
| int status; |
| struct cdc_state *info = (void *) &dev->data; |
| |
| status = generic_cdc_bind (dev, intf); |
| if (status < 0) |
| return status; |
| |
| status = get_ethernet_addr (dev, info->ether); |
| if (status < 0) { |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface (&usbnet_driver, info->data); |
| return status; |
| } |
| |
| /* FIXME cdc-ether has some multicast code too, though it complains |
| * in routine cases. info->ether describes the multicast support. |
| */ |
| return 0; |
| } |
| |
| static const struct driver_info cdc_info = { |
| .description = "CDC Ethernet Device", |
| .flags = FLAG_ETHER, |
| // .check_connect = cdc_check_connect, |
| .bind = cdc_bind, |
| .unbind = cdc_unbind, |
| .status = cdc_status, |
| }; |
| |
| #endif /* CONFIG_USB_CDCETHER */ |
| |
| |
| |
| #ifdef CONFIG_USB_EPSON2888 |
| #define HAVE_HARDWARE |
| |
| /*------------------------------------------------------------------------- |
| * |
| * EPSON USB clients |
| * |
| * This is the same idea as Linux PDAs (below) except the firmware in the |
| * device might not be Tux-powered. Epson provides reference firmware that |
| * implements this interface. Product developers can reuse or modify that |
| * code, such as by using their own product and vendor codes. |
| * |
| * Support was from Juro Bystricky <bystricky.juro@erd.epson.com> |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| static const struct driver_info epson2888_info = { |
| .description = "Epson USB Device", |
| .check_connect = always_connected, |
| |
| .in = 4, .out = 3, |
| }; |
| |
| #endif /* CONFIG_USB_EPSON2888 */ |
| |
| |
| #ifdef CONFIG_USB_GENESYS |
| #define HAVE_HARDWARE |
| |
| /*------------------------------------------------------------------------- |
| * |
| * GeneSys GL620USB-A (www.genesyslogic.com.tw) |
| * |
| * ... should partially interop with the Win32 driver for this hardware |
| * The GeneSys docs imply there's some NDIS issue motivating this framing. |
| * |
| * Some info from GeneSys: |
| * - GL620USB-A is full duplex; GL620USB is only half duplex for bulk. |
| * (Some cables, like the BAFO-100c, use the half duplex version.) |
| * - For the full duplex model, the low bit of the version code says |
| * which side is which ("left/right"). |
| * - For the half duplex type, a control/interrupt handshake settles |
| * the transfer direction. (That's disabled here, partially coded.) |
| * A control URB would block until other side writes an interrupt. |
| * |
| * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw> |
| * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>. |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| // control msg write command |
| #define GENELINK_CONNECT_WRITE 0xF0 |
| // interrupt pipe index |
| #define GENELINK_INTERRUPT_PIPE 0x03 |
| // interrupt read buffer size |
| #define INTERRUPT_BUFSIZE 0x08 |
| // interrupt pipe interval value |
| #define GENELINK_INTERRUPT_INTERVAL 0x10 |
| // max transmit packet number per transmit |
| #define GL_MAX_TRANSMIT_PACKETS 32 |
| // max packet length |
| #define GL_MAX_PACKET_LEN 1514 |
| // max receive buffer size |
| #define GL_RCV_BUF_SIZE \ |
| (((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4) |
| |
| struct gl_packet { |
| u32 packet_length; |
| char packet_data [1]; |
| }; |
| |
| struct gl_header { |
| u32 packet_count; |
| struct gl_packet packets; |
| }; |
| |
| #ifdef GENELINK_ACK |
| |
| // FIXME: this code is incomplete, not debugged; it doesn't |
| // handle interrupts correctly. interrupts should be generic |
| // code like all other device I/O, anyway. |
| |
| struct gl_priv { |
| struct urb *irq_urb; |
| char irq_buf [INTERRUPT_BUFSIZE]; |
| }; |
| |
| static inline int gl_control_write (struct usbnet *dev, u8 request, u16 value) |
| { |
| int retval; |
| |
| retval = usb_control_msg (dev->udev, |
| usb_sndctrlpipe (dev->udev, 0), |
| request, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| value, |
| 0, // index |
| 0, // data buffer |
| 0, // size |
| CONTROL_TIMEOUT_MS); |
| return retval; |
| } |
| |
| static void gl_interrupt_complete (struct urb *urb, struct pt_regs *regs) |
| { |
| int status = urb->status; |
| |
| switch (status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| /* this urb is terminated, clean up */ |
| dbg("%s - urb shutting down with status: %d", |
| __FUNCTION__, status); |
| return; |
| default: |
| dbg("%s - nonzero urb status received: %d", |
| __FUNCTION__, urb->status); |
| } |
| |
| status = usb_submit_urb (urb, GFP_ATOMIC); |
| if (status) |
| err ("%s - usb_submit_urb failed with result %d", |
| __FUNCTION__, status); |
| } |
| |
| static int gl_interrupt_read (struct usbnet *dev) |
| { |
| struct gl_priv *priv = dev->priv_data; |
| int retval; |
| |
| // issue usb interrupt read |
| if (priv && priv->irq_urb) { |
| // submit urb |
| if ((retval = usb_submit_urb (priv->irq_urb, GFP_KERNEL)) != 0) |
| dbg ("gl_interrupt_read: submit fail - %X...", retval); |
| else |
| dbg ("gl_interrupt_read: submit success..."); |
| } |
| |
| return 0; |
| } |
| |
| // check whether another side is connected |
| static int genelink_check_connect (struct usbnet *dev) |
| { |
| int retval; |
| |
| dbg ("genelink_check_connect..."); |
| |
| // detect whether another side is connected |
| if ((retval = gl_control_write (dev, GENELINK_CONNECT_WRITE, 0)) != 0) { |
| dbg ("%s: genelink_check_connect write fail - %X", |
| dev->net->name, retval); |
| return retval; |
| } |
| |
| // usb interrupt read to ack another side |
| if ((retval = gl_interrupt_read (dev)) != 0) { |
| dbg ("%s: genelink_check_connect read fail - %X", |
| dev->net->name, retval); |
| return retval; |
| } |
| |
| dbg ("%s: genelink_check_connect read success", dev->net->name); |
| return 0; |
| } |
| |
| // allocate and initialize the private data for genelink |
| static int genelink_init (struct usbnet *dev) |
| { |
| struct gl_priv *priv; |
| |
| // allocate the private data structure |
| if ((priv = kmalloc (sizeof *priv, GFP_KERNEL)) == 0) { |
| dbg ("%s: cannot allocate private data per device", |
| dev->net->name); |
| return -ENOMEM; |
| } |
| |
| // allocate irq urb |
| if ((priv->irq_urb = usb_alloc_urb (0, GFP_KERNEL)) == 0) { |
| dbg ("%s: cannot allocate private irq urb per device", |
| dev->net->name); |
| kfree (priv); |
| return -ENOMEM; |
| } |
| |
| // fill irq urb |
| usb_fill_int_urb (priv->irq_urb, dev->udev, |
| usb_rcvintpipe (dev->udev, GENELINK_INTERRUPT_PIPE), |
| priv->irq_buf, INTERRUPT_BUFSIZE, |
| gl_interrupt_complete, 0, |
| GENELINK_INTERRUPT_INTERVAL); |
| |
| // set private data pointer |
| dev->priv_data = priv; |
| |
| return 0; |
| } |
| |
| // release the private data |
| static int genelink_free (struct usbnet *dev) |
| { |
| struct gl_priv *priv = dev->priv_data; |
| |
| if (!priv) |
| return 0; |
| |
| // FIXME: can't cancel here; it's synchronous, and |
| // should have happened earlier in any case (interrupt |
| // handling needs to be generic) |
| |
| // cancel irq urb first |
| usb_kill_urb (priv->irq_urb); |
| |
| // free irq urb |
| usb_free_urb (priv->irq_urb); |
| |
| // free the private data structure |
| kfree (priv); |
| |
| return 0; |
| } |
| |
| #endif |
| |
| static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb) |
| { |
| struct gl_header *header; |
| struct gl_packet *packet; |
| struct sk_buff *gl_skb; |
| u32 size; |
| |
| header = (struct gl_header *) skb->data; |
| |
| // get the packet count of the received skb |
| le32_to_cpus (&header->packet_count); |
| if ((header->packet_count > GL_MAX_TRANSMIT_PACKETS) |
| || (header->packet_count < 0)) { |
| dbg ("genelink: invalid received packet count %d", |
| header->packet_count); |
| return 0; |
| } |
| |
| // set the current packet pointer to the first packet |
| packet = &header->packets; |
| |
| // decrement the length for the packet count size 4 bytes |
| skb_pull (skb, 4); |
| |
| while (header->packet_count > 1) { |
| // get the packet length |
| size = packet->packet_length; |
| |
| // this may be a broken packet |
| if (size > GL_MAX_PACKET_LEN) { |
| dbg ("genelink: invalid rx length %d", size); |
| return 0; |
| } |
| |
| // allocate the skb for the individual packet |
| gl_skb = alloc_skb (size, GFP_ATOMIC); |
| if (gl_skb) { |
| |
| // copy the packet data to the new skb |
| memcpy(skb_put(gl_skb, size), packet->packet_data, size); |
| skb_return (dev, gl_skb); |
| } |
| |
| // advance to the next packet |
| packet = (struct gl_packet *) |
| &packet->packet_data [size]; |
| header->packet_count--; |
| |
| // shift the data pointer to the next gl_packet |
| skb_pull (skb, size + 4); |
| } |
| |
| // skip the packet length field 4 bytes |
| skb_pull (skb, 4); |
| |
| if (skb->len > GL_MAX_PACKET_LEN) { |
| dbg ("genelink: invalid rx length %d", skb->len); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static struct sk_buff * |
| genelink_tx_fixup (struct usbnet *dev, struct sk_buff *skb, int flags) |
| { |
| int padlen; |
| int length = skb->len; |
| int headroom = skb_headroom (skb); |
| int tailroom = skb_tailroom (skb); |
| u32 *packet_count; |
| u32 *packet_len; |
| |
| // FIXME: magic numbers, bleech |
| padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1; |
| |
| if ((!skb_cloned (skb)) |
| && ((headroom + tailroom) >= (padlen + (4 + 4*1)))) { |
| if ((headroom < (4 + 4*1)) || (tailroom < padlen)) { |
| skb->data = memmove (skb->head + (4 + 4*1), |
| skb->data, skb->len); |
| skb->tail = skb->data + skb->len; |
| } |
| } else { |
| struct sk_buff *skb2; |
| skb2 = skb_copy_expand (skb, (4 + 4*1) , padlen, flags); |
| dev_kfree_skb_any (skb); |
| skb = skb2; |
| if (!skb) |
| return NULL; |
| } |
| |
| // attach the packet count to the header |
| packet_count = (u32 *) skb_push (skb, (4 + 4*1)); |
| packet_len = packet_count + 1; |
| |
| // FIXME little endian? |
| *packet_count = 1; |
| *packet_len = length; |
| |
| // add padding byte |
| if ((skb->len % dev->maxpacket) == 0) |
| skb_put (skb, 1); |
| |
| return skb; |
| } |
| |
| static const struct driver_info genelink_info = { |
| .description = "Genesys GeneLink", |
| .flags = FLAG_FRAMING_GL | FLAG_NO_SETINT, |
| .rx_fixup = genelink_rx_fixup, |
| .tx_fixup = genelink_tx_fixup, |
| |
| .in = 1, .out = 2, |
| |
| #ifdef GENELINK_ACK |
| .check_connect =genelink_check_connect, |
| #endif |
| }; |
| |
| #endif /* CONFIG_USB_GENESYS */ |
| |
| |
| |
| #ifdef CONFIG_USB_NET1080 |
| #define HAVE_HARDWARE |
| |
| /*------------------------------------------------------------------------- |
| * |
| * Netchip 1080 driver ... http://www.netchip.com |
| * Used in LapLink cables |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| #define dev_packet_id data[0] |
| #define frame_errors data[1] |
| |
| /* |
| * NetChip framing of ethernet packets, supporting additional error |
| * checks for links that may drop bulk packets from inside messages. |
| * Odd USB length == always short read for last usb packet. |
| * - nc_header |
| * - Ethernet header (14 bytes) |
| * - payload |
| * - (optional padding byte, if needed so length becomes odd) |
| * - nc_trailer |
| * |
| * This framing is to be avoided for non-NetChip devices. |
| */ |
| |
| struct nc_header { // packed: |
| __le16 hdr_len; // sizeof nc_header (LE, all) |
| __le16 packet_len; // payload size (including ethhdr) |
| __le16 packet_id; // detects dropped packets |
| #define MIN_HEADER 6 |
| |
| // all else is optional, and must start with: |
| // u16 vendorId; // from usb-if |
| // u16 productId; |
| } __attribute__((__packed__)); |
| |
| #define PAD_BYTE ((unsigned char)0xAC) |
| |
| struct nc_trailer { |
| __le16 packet_id; |
| } __attribute__((__packed__)); |
| |
| // packets may use FLAG_FRAMING_NC and optional pad |
| #define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \ |
| + sizeof (struct ethhdr) \ |
| + (mtu) \ |
| + 1 \ |
| + sizeof (struct nc_trailer)) |
| |
| #define MIN_FRAMED FRAMED_SIZE(0) |
| |
| |
| /* |
| * Zero means no timeout; else, how long a 64 byte bulk packet may be queued |
| * before the hardware drops it. If that's done, the driver will need to |
| * frame network packets to guard against the dropped USB packets. The win32 |
| * driver sets this for both sides of the link. |
| */ |
| #define NC_READ_TTL_MS ((u8)255) // ms |
| |
| /* |
| * We ignore most registers and EEPROM contents. |
| */ |
| #define REG_USBCTL ((u8)0x04) |
| #define REG_TTL ((u8)0x10) |
| #define REG_STATUS ((u8)0x11) |
| |
| /* |
| * Vendor specific requests to read/write data |
| */ |
| #define REQUEST_REGISTER ((u8)0x10) |
| #define REQUEST_EEPROM ((u8)0x11) |
| |
| static int |
| nc_vendor_read (struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr) |
| { |
| int status = usb_control_msg (dev->udev, |
| usb_rcvctrlpipe (dev->udev, 0), |
| req, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 0, regnum, |
| retval_ptr, sizeof *retval_ptr, |
| CONTROL_TIMEOUT_MS); |
| if (status > 0) |
| status = 0; |
| if (!status) |
| le16_to_cpus (retval_ptr); |
| return status; |
| } |
| |
| static inline int |
| nc_register_read (struct usbnet *dev, u8 regnum, u16 *retval_ptr) |
| { |
| return nc_vendor_read (dev, REQUEST_REGISTER, regnum, retval_ptr); |
| } |
| |
| // no retval ... can become async, usable in_interrupt() |
| static void |
| nc_vendor_write (struct usbnet *dev, u8 req, u8 regnum, u16 value) |
| { |
| usb_control_msg (dev->udev, |
| usb_sndctrlpipe (dev->udev, 0), |
| req, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, regnum, |
| NULL, 0, // data is in setup packet |
| CONTROL_TIMEOUT_MS); |
| } |
| |
| static inline void |
| nc_register_write (struct usbnet *dev, u8 regnum, u16 value) |
| { |
| nc_vendor_write (dev, REQUEST_REGISTER, regnum, value); |
| } |
| |
| |
| #if 0 |
| static void nc_dump_registers (struct usbnet *dev) |
| { |
| u8 reg; |
| u16 *vp = kmalloc (sizeof (u16)); |
| |
| if (!vp) { |
| dbg ("no memory?"); |
| return; |
| } |
| |
| dbg ("%s registers:", dev->net->name); |
| for (reg = 0; reg < 0x20; reg++) { |
| int retval; |
| |
| // reading some registers is trouble |
| if (reg >= 0x08 && reg <= 0xf) |
| continue; |
| if (reg >= 0x12 && reg <= 0x1e) |
| continue; |
| |
| retval = nc_register_read (dev, reg, vp); |
| if (retval < 0) |
| dbg ("%s reg [0x%x] ==> error %d", |
| dev->net->name, reg, retval); |
| else |
| dbg ("%s reg [0x%x] = 0x%x", |
| dev->net->name, reg, *vp); |
| } |
| kfree (vp); |
| } |
| #endif |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * Control register |
| */ |
| |
| #define USBCTL_WRITABLE_MASK 0x1f0f |
| // bits 15-13 reserved, r/o |
| #define USBCTL_ENABLE_LANG (1 << 12) |
| #define USBCTL_ENABLE_MFGR (1 << 11) |
| #define USBCTL_ENABLE_PROD (1 << 10) |
| #define USBCTL_ENABLE_SERIAL (1 << 9) |
| #define USBCTL_ENABLE_DEFAULTS (1 << 8) |
| // bits 7-4 reserved, r/o |
| #define USBCTL_FLUSH_OTHER (1 << 3) |
| #define USBCTL_FLUSH_THIS (1 << 2) |
| #define USBCTL_DISCONN_OTHER (1 << 1) |
| #define USBCTL_DISCONN_THIS (1 << 0) |
| |
| static inline void nc_dump_usbctl (struct usbnet *dev, u16 usbctl) |
| { |
| if (!netif_msg_link (dev)) |
| return; |
| devdbg (dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;" |
| " this%s%s;" |
| " other%s%s; r/o 0x%x", |
| dev->udev->bus->bus_name, dev->udev->devpath, |
| usbctl, |
| (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "", |
| (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "", |
| (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "", |
| (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "", |
| (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "", |
| |
| (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "", |
| (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "", |
| (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "", |
| (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "", |
| usbctl & ~USBCTL_WRITABLE_MASK |
| ); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * Status register |
| */ |
| |
| #define STATUS_PORT_A (1 << 15) |
| |
| #define STATUS_CONN_OTHER (1 << 14) |
| #define STATUS_SUSPEND_OTHER (1 << 13) |
| #define STATUS_MAILBOX_OTHER (1 << 12) |
| #define STATUS_PACKETS_OTHER(n) (((n) >> 8) && 0x03) |
| |
| #define STATUS_CONN_THIS (1 << 6) |
| #define STATUS_SUSPEND_THIS (1 << 5) |
| #define STATUS_MAILBOX_THIS (1 << 4) |
| #define STATUS_PACKETS_THIS(n) (((n) >> 0) && 0x03) |
| |
| #define STATUS_UNSPEC_MASK 0x0c8c |
| #define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK)) |
| |
| |
| static inline void nc_dump_status (struct usbnet *dev, u16 status) |
| { |
| if (!netif_msg_link (dev)) |
| return; |
| devdbg (dev, "net1080 %s-%s status 0x%x:" |
| " this (%c) PKT=%d%s%s%s;" |
| " other PKT=%d%s%s%s; unspec 0x%x", |
| dev->udev->bus->bus_name, dev->udev->devpath, |
| status, |
| |
| // XXX the packet counts don't seem right |
| // (1 at reset, not 0); maybe UNSPEC too |
| |
| (status & STATUS_PORT_A) ? 'A' : 'B', |
| STATUS_PACKETS_THIS (status), |
| (status & STATUS_CONN_THIS) ? " CON" : "", |
| (status & STATUS_SUSPEND_THIS) ? " SUS" : "", |
| (status & STATUS_MAILBOX_THIS) ? " MBOX" : "", |
| |
| STATUS_PACKETS_OTHER (status), |
| (status & STATUS_CONN_OTHER) ? " CON" : "", |
| (status & STATUS_SUSPEND_OTHER) ? " SUS" : "", |
| (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "", |
| |
| status & STATUS_UNSPEC_MASK |
| ); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * TTL register |
| */ |
| |
| #define TTL_THIS(ttl) (0x00ff & ttl) |
| #define TTL_OTHER(ttl) (0x00ff & (ttl >> 8)) |
| #define MK_TTL(this,other) ((u16)(((other)<<8)|(0x00ff&(this)))) |
| |
| static inline void nc_dump_ttl (struct usbnet *dev, u16 ttl) |
| { |
| if (netif_msg_link (dev)) |
| devdbg (dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d", |
| dev->udev->bus->bus_name, dev->udev->devpath, |
| ttl, TTL_THIS (ttl), TTL_OTHER (ttl)); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int net1080_reset (struct usbnet *dev) |
| { |
| u16 usbctl, status, ttl; |
| u16 *vp = kmalloc (sizeof (u16), GFP_KERNEL); |
| int retval; |
| |
| if (!vp) |
| return -ENOMEM; |
| |
| // nc_dump_registers (dev); |
| |
| if ((retval = nc_register_read (dev, REG_STATUS, vp)) < 0) { |
| dbg ("can't read %s-%s status: %d", |
| dev->udev->bus->bus_name, dev->udev->devpath, retval); |
| goto done; |
| } |
| status = *vp; |
| nc_dump_status (dev, status); |
| |
| if ((retval = nc_register_read (dev, REG_USBCTL, vp)) < 0) { |
| dbg ("can't read USBCTL, %d", retval); |
| goto done; |
| } |
| usbctl = *vp; |
| nc_dump_usbctl (dev, usbctl); |
| |
| nc_register_write (dev, REG_USBCTL, |
| USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER); |
| |
| if ((retval = nc_register_read (dev, REG_TTL, vp)) < 0) { |
| dbg ("can't read TTL, %d", retval); |
| goto done; |
| } |
| ttl = *vp; |
| // nc_dump_ttl (dev, ttl); |
| |
| nc_register_write (dev, REG_TTL, |
| MK_TTL (NC_READ_TTL_MS, TTL_OTHER (ttl)) ); |
| dbg ("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS); |
| |
| if (netif_msg_link (dev)) |
| devinfo (dev, "port %c, peer %sconnected", |
| (status & STATUS_PORT_A) ? 'A' : 'B', |
| (status & STATUS_CONN_OTHER) ? "" : "dis" |
| ); |
| retval = 0; |
| |
| done: |
| kfree (vp); |
| return retval; |
| } |
| |
| static int net1080_check_connect (struct usbnet *dev) |
| { |
| int retval; |
| u16 status; |
| u16 *vp = kmalloc (sizeof (u16), GFP_KERNEL); |
| |
| if (!vp) |
| return -ENOMEM; |
| retval = nc_register_read (dev, REG_STATUS, vp); |
| status = *vp; |
| kfree (vp); |
| if (retval != 0) { |
| dbg ("%s net1080_check_conn read - %d", dev->net->name, retval); |
| return retval; |
| } |
| if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER) |
| return -ENOLINK; |
| return 0; |
| } |
| |
| static void nc_flush_complete (struct urb *urb, struct pt_regs *regs) |
| { |
| kfree (urb->context); |
| usb_free_urb(urb); |
| } |
| |
| static void nc_ensure_sync (struct usbnet *dev) |
| { |
| dev->frame_errors++; |
| if (dev->frame_errors > 5) { |
| struct urb *urb; |
| struct usb_ctrlrequest *req; |
| int status; |
| |
| /* Send a flush */ |
| urb = usb_alloc_urb (0, SLAB_ATOMIC); |
| if (!urb) |
| return; |
| |
| req = kmalloc (sizeof *req, GFP_ATOMIC); |
| if (!req) { |
| usb_free_urb (urb); |
| return; |
| } |
| |
| req->bRequestType = USB_DIR_OUT |
| | USB_TYPE_VENDOR |
| | USB_RECIP_DEVICE; |
| req->bRequest = REQUEST_REGISTER; |
| req->wValue = cpu_to_le16 (USBCTL_FLUSH_THIS |
| | USBCTL_FLUSH_OTHER); |
| req->wIndex = cpu_to_le16 (REG_USBCTL); |
| req->wLength = cpu_to_le16 (0); |
| |
| /* queue an async control request, we don't need |
| * to do anything when it finishes except clean up. |
| */ |
| usb_fill_control_urb (urb, dev->udev, |
| usb_sndctrlpipe (dev->udev, 0), |
| (unsigned char *) req, |
| NULL, 0, |
| nc_flush_complete, req); |
| status = usb_submit_urb (urb, GFP_ATOMIC); |
| if (status) { |
| kfree (req); |
| usb_free_urb (urb); |
| return; |
| } |
| |
| if (netif_msg_rx_err (dev)) |
| devdbg (dev, "flush net1080; too many framing errors"); |
| dev->frame_errors = 0; |
| } |
| } |
| |
| static int net1080_rx_fixup (struct usbnet *dev, struct sk_buff *skb) |
| { |
| struct nc_header *header; |
| struct nc_trailer *trailer; |
| u16 hdr_len, packet_len; |
| |
| if (!(skb->len & 0x01) |
| || MIN_FRAMED > skb->len |
| || skb->len > FRAMED_SIZE (dev->net->mtu)) { |
| dev->stats.rx_frame_errors++; |
| dbg ("rx framesize %d range %d..%d mtu %d", skb->len, |
| (int)MIN_FRAMED, (int)FRAMED_SIZE (dev->net->mtu), |
| dev->net->mtu); |
| nc_ensure_sync (dev); |
| return 0; |
| } |
| |
| header = (struct nc_header *) skb->data; |
| hdr_len = le16_to_cpup (&header->hdr_len); |
| packet_len = le16_to_cpup (&header->packet_len); |
| if (FRAMED_SIZE (packet_len) > MAX_PACKET) { |
| dev->stats.rx_frame_errors++; |
| dbg ("packet too big, %d", packet_len); |
| nc_ensure_sync (dev); |
| return 0; |
| } else if (hdr_len < MIN_HEADER) { |
| dev->stats.rx_frame_errors++; |
| dbg ("header too short, %d", hdr_len); |
| nc_ensure_sync (dev); |
| return 0; |
| } else if (hdr_len > MIN_HEADER) { |
| // out of band data for us? |
| dbg ("header OOB, %d bytes", hdr_len - MIN_HEADER); |
| nc_ensure_sync (dev); |
| // switch (vendor/product ids) { ... } |
| } |
| skb_pull (skb, hdr_len); |
| |
| trailer = (struct nc_trailer *) |
| (skb->data + skb->len - sizeof *trailer); |
| skb_trim (skb, skb->len - sizeof *trailer); |
| |
| if ((packet_len & 0x01) == 0) { |
| if (skb->data [packet_len] != PAD_BYTE) { |
| dev->stats.rx_frame_errors++; |
| dbg ("bad pad"); |
| return 0; |
| } |
| skb_trim (skb, skb->len - 1); |
| } |
| if (skb->len != packet_len) { |
| dev->stats.rx_frame_errors++; |
| dbg ("bad packet len %d (expected %d)", |
| skb->len, packet_len); |
| nc_ensure_sync (dev); |
| return 0; |
| } |
| if (header->packet_id != get_unaligned (&trailer->packet_id)) { |
| dev->stats.rx_fifo_errors++; |
| dbg ("(2+ dropped) rx packet_id mismatch 0x%x 0x%x", |
| le16_to_cpu (header->packet_id), |
| le16_to_cpu (trailer->packet_id)); |
| return 0; |
| } |
| #if 0 |
| devdbg (dev, "frame <rx h %d p %d id %d", header->hdr_len, |
| header->packet_len, header->packet_id); |
| #endif |
| dev->frame_errors = 0; |
| return 1; |
| } |
| |
| static struct sk_buff * |
| net1080_tx_fixup (struct usbnet *dev, struct sk_buff *skb, int flags) |
| { |
| int padlen; |
| struct sk_buff *skb2; |
| |
| padlen = ((skb->len + sizeof (struct nc_header) |
| + sizeof (struct nc_trailer)) & 0x01) ? 0 : 1; |
| if (!skb_cloned (skb)) { |
| int headroom = skb_headroom (skb); |
| int tailroom = skb_tailroom (skb); |
| |
| if ((padlen + sizeof (struct nc_trailer)) <= tailroom |
| && sizeof (struct nc_header) <= headroom) |
| /* There's enough head and tail room */ |
| return skb; |
| |
| if ((sizeof (struct nc_header) + padlen |
| + sizeof (struct nc_trailer)) < |
| (headroom + tailroom)) { |
| /* There's enough total room, so just readjust */ |
| skb->data = memmove (skb->head |
| + sizeof (struct nc_header), |
| skb->data, skb->len); |
| skb->tail = skb->data + skb->len; |
| return skb; |
| } |
| } |
| |
| /* Create a new skb to use with the correct size */ |
| skb2 = skb_copy_expand (skb, |
| sizeof (struct nc_header), |
| sizeof (struct nc_trailer) + padlen, |
| flags); |
| dev_kfree_skb_any (skb); |
| return skb2; |
| } |
| |
| static const struct driver_info net1080_info = { |
| .description = "NetChip TurboCONNECT", |
| .flags = FLAG_FRAMING_NC, |
| .reset = net1080_reset, |
| .check_connect =net1080_check_connect, |
| .rx_fixup = net1080_rx_fixup, |
| .tx_fixup = net1080_tx_fixup, |
| }; |
| |
| #endif /* CONFIG_USB_NET1080 */ |
| |
| |
| |
| #ifdef CONFIG_USB_PL2301 |
| #define HAVE_HARDWARE |
| |
| /*------------------------------------------------------------------------- |
| * |
| * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com |
| * |
| * The protocol and handshaking used here should be bug-compatible |
| * with the Linux 2.2 "plusb" driver, by Deti Fliegl. |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| /* |
| * Bits 0-4 can be used for software handshaking; they're set from |
| * one end, cleared from the other, "read" with the interrupt byte. |
| */ |
| #define PL_S_EN (1<<7) /* (feature only) suspend enable */ |
| /* reserved bit -- rx ready (6) ? */ |
| #define PL_TX_READY (1<<5) /* (interrupt only) transmit ready */ |
| #define PL_RESET_OUT (1<<4) /* reset output pipe */ |
| #define PL_RESET_IN (1<<3) /* reset input pipe */ |
| #define PL_TX_C (1<<2) /* transmission complete */ |
| #define PL_TX_REQ (1<<1) /* transmission received */ |
| #define PL_PEER_E (1<<0) /* peer exists */ |
| |
| static inline int |
| pl_vendor_req (struct usbnet *dev, u8 req, u8 val, u8 index) |
| { |
| return usb_control_msg (dev->udev, |
| usb_rcvctrlpipe (dev->udev, 0), |
| req, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| val, index, |
| NULL, 0, |
| CONTROL_TIMEOUT_MS); |
| } |
| |
| static inline int |
| pl_clear_QuickLink_features (struct usbnet *dev, int val) |
| { |
| return pl_vendor_req (dev, 1, (u8) val, 0); |
| } |
| |
| static inline int |
| pl_set_QuickLink_features (struct usbnet *dev, int val) |
| { |
| return pl_vendor_req (dev, 3, (u8) val, 0); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int pl_reset (struct usbnet *dev) |
| { |
| /* some units seem to need this reset, others reject it utterly. |
| * FIXME be more like "naplink" or windows drivers. |
| */ |
| (void) pl_set_QuickLink_features (dev, |
| PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E); |
| return 0; |
| } |
| |
| static const struct driver_info prolific_info = { |
| .description = "Prolific PL-2301/PL-2302", |
| .flags = FLAG_NO_SETINT, |
| /* some PL-2302 versions seem to fail usb_set_interface() */ |
| .reset = pl_reset, |
| }; |
| |
| #endif /* CONFIG_USB_PL2301 */ |
| |
| |
| #ifdef CONFIG_USB_KC2190 |
| #define HAVE_HARDWARE |
| static const struct driver_info kc2190_info = { |
| .description = "KC Technology KC-190", |
| }; |
| #endif /* CONFIG_USB_KC2190 */ |
| |
| |
| #ifdef CONFIG_USB_ARMLINUX |
| #define HAVE_HARDWARE |
| |
| /*------------------------------------------------------------------------- |
| * |
| * Intel's SA-1100 chip integrates basic USB support, and is used |
| * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more. |
| * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to |
| * network using minimal USB framing data. |
| * |
| * This describes the driver currently in standard ARM Linux kernels. |
| * The Zaurus uses a different driver (see later). |
| * |
| * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support |
| * and different USB endpoint numbering than the SA1100 devices. The |
| * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100 |
| * so we rely on the endpoint descriptors. |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| static const struct driver_info linuxdev_info = { |
| .description = "Linux Device", |
| .check_connect = always_connected, |
| }; |
| |
| static const struct driver_info yopy_info = { |
| .description = "Yopy", |
| .check_connect = always_connected, |
| }; |
| |
| static const struct driver_info blob_info = { |
| .description = "Boot Loader OBject", |
| .check_connect = always_connected, |
| }; |
| |
| #endif /* CONFIG_USB_ARMLINUX */ |
| |
| |
| #ifdef CONFIG_USB_ZAURUS |
| #define HAVE_HARDWARE |
| |
| #include <linux/crc32.h> |
| |
| /*------------------------------------------------------------------------- |
| * |
| * Zaurus is also a SA-1110 based PDA, but one using a different driver |
| * (and framing) for its USB slave/gadget controller than the case above. |
| * |
| * For the current version of that driver, the main way that framing is |
| * nonstandard (also from perspective of the CDC ethernet model!) is a |
| * crc32, added to help detect when some sa1100 usb-to-memory DMA errata |
| * haven't been fully worked around. Also, all Zaurii use the same |
| * default Ethernet address. |
| * |
| * PXA based models use the same framing, and also can't implement |
| * set_interface properly. |
| * |
| * All known Zaurii lie about their standards conformance. Most lie by |
| * saying they support CDC Ethernet. Some lie and say they support CDC |
| * MDLM (as if for access to cell phone modems). Someone, please beat |
| * on Sharp (and other such vendors) for a while with a cluestick. |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| static struct sk_buff * |
| zaurus_tx_fixup (struct usbnet *dev, struct sk_buff *skb, int flags) |
| { |
| int padlen; |
| struct sk_buff *skb2; |
| |
| padlen = 2; |
| if (!skb_cloned (skb)) { |
| int tailroom = skb_tailroom (skb); |
| if ((padlen + 4) <= tailroom) |
| goto done; |
| } |
| skb2 = skb_copy_expand (skb, 0, 4 + padlen, flags); |
| dev_kfree_skb_any (skb); |
| skb = skb2; |
| if (skb) { |
| u32 fcs; |
| done: |
| fcs = crc32_le (~0, skb->data, skb->len); |
| fcs = ~fcs; |
| |
| *skb_put (skb, 1) = fcs & 0xff; |
| *skb_put (skb, 1) = (fcs>> 8) & 0xff; |
| *skb_put (skb, 1) = (fcs>>16) & 0xff; |
| *skb_put (skb, 1) = (fcs>>24) & 0xff; |
| } |
| return skb; |
| } |
| |
| static const struct driver_info zaurus_sl5x00_info = { |
| .description = "Sharp Zaurus SL-5x00", |
| .flags = FLAG_FRAMING_Z, |
| .check_connect = always_connected, |
| .bind = generic_cdc_bind, |
| .unbind = cdc_unbind, |
| .tx_fixup = zaurus_tx_fixup, |
| }; |
| #define ZAURUS_STRONGARM_INFO ((unsigned long)&zaurus_sl5x00_info) |
| |
| static const struct driver_info zaurus_pxa_info = { |
| .description = "Sharp Zaurus, PXA-2xx based", |
| .flags = FLAG_FRAMING_Z, |
| .check_connect = always_connected, |
| .bind = generic_cdc_bind, |
| .unbind = cdc_unbind, |
| .tx_fixup = zaurus_tx_fixup, |
| }; |
| #define ZAURUS_PXA_INFO ((unsigned long)&zaurus_pxa_info) |
| |
| static const struct driver_info olympus_mxl_info = { |
| .description = "Olympus R1000", |
| .flags = FLAG_FRAMING_Z, |
| .check_connect = always_connected, |
| .bind = generic_cdc_bind, |
| .unbind = cdc_unbind, |
| .tx_fixup = zaurus_tx_fixup, |
| }; |
| #define OLYMPUS_MXL_INFO ((unsigned long)&olympus_mxl_info) |
| |
| |
| /* Some more recent products using Lineo/Belcarra code will wrongly claim |
| * CDC MDLM conformance. They aren't conformant: data endpoints live |
| * in the control interface, there's no data interface, and it's not used |
| * to talk to a cell phone radio. But at least we can detect these two |
| * pseudo-classes, rather than growing this product list with entries for |
| * each new nonconformant product (sigh). |
| */ |
| static const u8 safe_guid[16] = { |
| 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, |
| 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, |
| }; |
| static const u8 blan_guid[16] = { |
| 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70, |
| 0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37, |
| }; |
| |
| static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf) |
| { |
| u8 *buf = intf->cur_altsetting->extra; |
| int len = intf->cur_altsetting->extralen; |
| struct usb_cdc_mdlm_desc *desc = NULL; |
| struct usb_cdc_mdlm_detail_desc *detail = NULL; |
| |
| while (len > 3) { |
| if (buf [1] != USB_DT_CS_INTERFACE) |
| goto next_desc; |
| |
| /* use bDescriptorSubType, and just verify that we get a |
| * "BLAN" (or "SAFE") descriptor. |
| */ |
| switch (buf [2]) { |
| case USB_CDC_MDLM_TYPE: |
| if (desc) { |
| dev_dbg (&intf->dev, "extra MDLM\n"); |
| goto bad_desc; |
| } |
| desc = (void *) buf; |
| if (desc->bLength != sizeof *desc) { |
| dev_dbg (&intf->dev, "MDLM len %u\n", |
| desc->bLength); |
| goto bad_desc; |
| } |
| /* expect bcdVersion 1.0, ignore */ |
| if (memcmp(&desc->bGUID, blan_guid, 16) |
| && memcmp(&desc->bGUID, safe_guid, 16) ) { |
| /* hey, this one might _really_ be MDLM! */ |
| dev_dbg (&intf->dev, "MDLM guid\n"); |
| goto bad_desc; |
| } |
| break; |
| case USB_CDC_MDLM_DETAIL_TYPE: |
| if (detail) { |
| dev_dbg (&intf->dev, "extra MDLM detail\n"); |
| goto bad_desc; |
| } |
| detail = (void *) buf; |
| switch (detail->bGuidDescriptorType) { |
| case 0: /* "SAFE" */ |
| if (detail->bLength != (sizeof *detail + 2)) |
| goto bad_detail; |
| break; |
| case 1: /* "BLAN" */ |
| if (detail->bLength != (sizeof *detail + 3)) |
| goto bad_detail; |
| break; |
| default: |
| goto bad_detail; |
| } |
| |
| /* assuming we either noticed BLAN already, or will |
| * find it soon, there are some data bytes here: |
| * - bmNetworkCapabilities (unused) |
| * - bmDataCapabilities (bits, see below) |
| * - bPad (ignored, for PADAFTER -- BLAN-only) |
| * bits are: |
| * - 0x01 -- Zaurus framing (add CRC) |
| * - 0x02 -- PADBEFORE (CRC includes some padding) |
| * - 0x04 -- PADAFTER (some padding after CRC) |
| * - 0x08 -- "fermat" packet mangling (for hw bugs) |
| * the PADBEFORE appears not to matter; we interop |
| * with devices that use it and those that don't. |
| */ |
| if ((detail->bDetailData[1] & ~02) != 0x01) { |
| /* bmDataCapabilites == 0 would be fine too, |
| * but framing is minidriver-coupled for now. |
| */ |
| bad_detail: |
| dev_dbg (&intf->dev, |
| "bad MDLM detail, %d %d %d\n", |
| detail->bLength, |
| detail->bDetailData[0], |
| detail->bDetailData[2]); |
| goto bad_desc; |
| } |
| break; |
| } |
| next_desc: |
| len -= buf [0]; /* bLength */ |
| buf += buf [0]; |
| } |
| |
| if (!desc || !detail) { |
| dev_dbg (&intf->dev, "missing cdc mdlm %s%sdescriptor\n", |
| desc ? "" : "func ", |
| detail ? "" : "detail "); |
| goto bad_desc; |
| } |
| |
| /* There's probably a CDC Ethernet descriptor there, but we can't |
| * rely on the Ethernet address it provides since not all vendors |
| * bother to make it unique. Likewise there's no point in tracking |
| * of the CDC event notifications. |
| */ |
| return get_endpoints (dev, intf); |
| |
| bad_desc: |
| dev_info (&dev->udev->dev, "unsupported MDLM descriptors\n"); |
| return -ENODEV; |
| } |
| |
| static const struct driver_info bogus_mdlm_info = { |
| .description = "pseudo-MDLM (BLAN) device", |
| .flags = FLAG_FRAMING_Z, |
| .check_connect = always_connected, |
| .tx_fixup = zaurus_tx_fixup, |
| .bind = blan_mdlm_bind, |
| }; |
| |
| #else |
| |
| /* blacklist all those devices */ |
| #define ZAURUS_STRONGARM_INFO 0 |
| #define ZAURUS_PXA_INFO 0 |
| #define OLYMPUS_MXL_INFO 0 |
| |
| #endif |
| |
| |
| /*------------------------------------------------------------------------- |
| * |
| * Network Device Driver (peer link to "Host Device", from USB host) |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| static int usbnet_change_mtu (struct net_device *net, int new_mtu) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| if (new_mtu <= MIN_PACKET || new_mtu > MAX_PACKET) |
| return -EINVAL; |
| #ifdef CONFIG_USB_NET1080 |
| if (((dev->driver_info->flags) & FLAG_FRAMING_NC)) { |
| if (FRAMED_SIZE (new_mtu) > MAX_PACKET) |
| return -EINVAL; |
| } |
| #endif |
| #ifdef CONFIG_USB_GENESYS |
| if (((dev->driver_info->flags) & FLAG_FRAMING_GL) |
| && new_mtu > GL_MAX_PACKET_LEN) |
| return -EINVAL; |
| #endif |
| // no second zero-length packet read wanted after mtu-sized packets |
| if (((new_mtu + sizeof (struct ethhdr)) % dev->maxpacket) == 0) |
| return -EDOM; |
| net->mtu = new_mtu; |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct net_device_stats *usbnet_get_stats (struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| return &dev->stats; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from |
| * completion callbacks. 2.5 should have fixed those bugs... |
| */ |
| |
| static void defer_bh(struct usbnet *dev, struct sk_buff *skb, struct sk_buff_head *list) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&list->lock, flags); |
| __skb_unlink(skb, list); |
| spin_unlock(&list->lock); |
| spin_lock(&dev->done.lock); |
| __skb_queue_tail(&dev->done, skb); |
| if (dev->done.qlen == 1) |
| tasklet_schedule(&dev->bh); |
| spin_unlock_irqrestore(&dev->done.lock, flags); |
| } |
| |
| /* some work can't be done in tasklets, so we use keventd |
| * |
| * NOTE: annoying asymmetry: if it's active, schedule_work() fails, |
| * but tasklet_schedule() doesn't. hope the failure is rare. |
| */ |
| static void defer_kevent (struct usbnet *dev, int work) |
| { |
| set_bit (work, &dev->flags); |
| if (!schedule_work (&dev->kevent)) |
| deverr (dev, "kevent %d may have been dropped", work); |
| else |
| devdbg (dev, "kevent %d scheduled", work); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void rx_complete (struct urb *urb, struct pt_regs *regs); |
| |
| static void rx_submit (struct usbnet *dev, struct urb *urb, int flags) |
| { |
| struct sk_buff *skb; |
| struct skb_data *entry; |
| int retval = 0; |
| unsigned long lockflags; |
| size_t size; |
| |
| #ifdef CONFIG_USB_NET1080 |
| if (dev->driver_info->flags & FLAG_FRAMING_NC) |
| size = FRAMED_SIZE (dev->net->mtu); |
| else |
| #endif |
| #ifdef CONFIG_USB_GENESYS |
| if (dev->driver_info->flags & FLAG_FRAMING_GL) |
| size = GL_RCV_BUF_SIZE; |
| else |
| #endif |
| #ifdef CONFIG_USB_ZAURUS |
| if (dev->driver_info->flags & FLAG_FRAMING_Z) |
| size = 6 + (sizeof (struct ethhdr) + dev->net->mtu); |
| else |
| #endif |
| #ifdef CONFIG_USB_RNDIS |
| if (dev->driver_info->flags & FLAG_FRAMING_RN) |
| size = RNDIS_MAX_TRANSFER; |
| else |
| #endif |
| #ifdef CONFIG_USB_AX8817X |
| if (dev->driver_info->flags & FLAG_FRAMING_AX) |
| size = 2048; |
| else |
| #endif |
| size = (sizeof (struct ethhdr) + dev->net->mtu); |
| |
| if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) { |
| if (netif_msg_rx_err (dev)) |
| devdbg (dev, "no rx skb"); |
| defer_kevent (dev, EVENT_RX_MEMORY); |
| usb_free_urb (urb); |
| return; |
| } |
| skb_reserve (skb, NET_IP_ALIGN); |
| |
| entry = (struct skb_data *) skb->cb; |
| entry->urb = urb; |
| entry->dev = dev; |
| entry->state = rx_start; |
| entry->length = 0; |
| |
| usb_fill_bulk_urb (urb, dev->udev, dev->in, |
| skb->data, size, rx_complete, skb); |
| urb->transfer_flags |= URB_ASYNC_UNLINK; |
| |
| spin_lock_irqsave (&dev->rxq.lock, lockflags); |
| |
| if (netif_running (dev->net) |
| && netif_device_present (dev->net) |
| && !test_bit (EVENT_RX_HALT, &dev->flags)) { |
| switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){ |
| case -EPIPE: |
| defer_kevent (dev, EVENT_RX_HALT); |
| break; |
| case -ENOMEM: |
| defer_kevent (dev, EVENT_RX_MEMORY); |
| break; |
| case -ENODEV: |
| if (netif_msg_ifdown (dev)) |
| devdbg (dev, "device gone"); |
| netif_device_detach (dev->net); |
| break; |
| default: |
| if (netif_msg_rx_err (dev)) |
| devdbg (dev, "rx submit, %d", retval); |
| tasklet_schedule (&dev->bh); |
| break; |
| case 0: |
| __skb_queue_tail (&dev->rxq, skb); |
| } |
| } else { |
| if (netif_msg_ifdown (dev)) |
| devdbg (dev, "rx: stopped"); |
| retval = -ENOLINK; |
| } |
| spin_unlock_irqrestore (&dev->rxq.lock, lockflags); |
| if (retval) { |
| dev_kfree_skb_any (skb); |
| usb_free_urb (urb); |
| } |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) |
| { |
| if (dev->driver_info->rx_fixup |
| && !dev->driver_info->rx_fixup (dev, skb)) |
| goto error; |
| // else network stack removes extra byte if we forced a short packet |
| |
| if (skb->len) |
| skb_return (dev, skb); |
| else { |
| if (netif_msg_rx_err (dev)) |
| devdbg (dev, "drop"); |
| error: |
| dev->stats.rx_errors++; |
| skb_queue_tail (&dev->done, skb); |
| } |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void rx_complete (struct urb *urb, struct pt_regs *regs) |
| { |
| struct sk_buff *skb = (struct sk_buff *) urb->context; |
| struct skb_data *entry = (struct skb_data *) skb->cb; |
| struct usbnet *dev = entry->dev; |
| int urb_status = urb->status; |
| |
| skb_put (skb, urb->actual_length); |
| entry->state = rx_done; |
| entry->urb = NULL; |
| |
| switch (urb_status) { |
| // success |
| case 0: |
| if (MIN_PACKET > skb->len || skb->len > MAX_PACKET) { |
| entry->state = rx_cleanup; |
| dev->stats.rx_errors++; |
| dev->stats.rx_length_errors++; |
| if (netif_msg_rx_err (dev)) |
| devdbg (dev, "rx length %d", skb->len); |
| } |
| break; |
| |
| // stalls need manual reset. this is rare ... except that |
| // when going through USB 2.0 TTs, unplug appears this way. |
| // we avoid the highspeed version of the ETIMEOUT/EILSEQ |
| // storm, recovering as needed. |
| case -EPIPE: |
| dev->stats.rx_errors++; |
| defer_kevent (dev, EVENT_RX_HALT); |
| // FALLTHROUGH |
| |
| // software-driven interface shutdown |
| case -ECONNRESET: // async unlink |
| case -ESHUTDOWN: // hardware gone |
| if (netif_msg_ifdown (dev)) |
| devdbg (dev, "rx shutdown, code %d", urb_status); |
| goto block; |
| |
| // we get controller i/o faults during khubd disconnect() delays. |
| // throttle down resubmits, to avoid log floods; just temporarily, |
| // so we still recover when the fault isn't a khubd delay. |
| case -EPROTO: // ehci |
| case -ETIMEDOUT: // ohci |
| case -EILSEQ: // uhci |
| dev->stats.rx_errors++; |
| if (!timer_pending (&dev->delay)) { |
| mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES); |
| if (netif_msg_link (dev)) |
| devdbg (dev, "rx throttle %d", urb_status); |
| } |
| block: |
| entry->state = rx_cleanup; |
| entry->urb = urb; |
| urb = NULL; |
| break; |
| |
| // data overrun ... flush fifo? |
| case -EOVERFLOW: |
| dev->stats.rx_over_errors++; |
| // FALLTHROUGH |
| |
| default: |
| entry->state = rx_cleanup; |
| dev->stats.rx_errors++; |
| if (netif_msg_rx_err (dev)) |
| devdbg (dev, "rx status %d", urb_status); |
| break; |
| } |
| |
| defer_bh(dev, skb, &dev->rxq); |
| |
| if (urb) { |
| if (netif_running (dev->net) |
| && !test_bit (EVENT_RX_HALT, &dev->flags)) { |
| rx_submit (dev, urb, GFP_ATOMIC); |
| return; |
| } |
| usb_free_urb (urb); |
| } |
| if (netif_msg_rx_err (dev)) |
| devdbg (dev, "no read resubmitted"); |
| } |
| |
| static void intr_complete (struct urb *urb, struct pt_regs *regs) |
| { |
| struct usbnet *dev = urb->context; |
| int status = urb->status; |
| |
| switch (status) { |
| /* success */ |
| case 0: |
| dev->driver_info->status(dev, urb); |
| break; |
| |
| /* software-driven interface shutdown */ |
| case -ENOENT: // urb killed |
| case -ESHUTDOWN: // hardware gone |
| if (netif_msg_ifdown (dev)) |
| devdbg (dev, "intr shutdown, code %d", status); |
| return; |
| |
| /* NOTE: not throttling like RX/TX, since this endpoint |
| * already polls infrequently |
| */ |
| default: |
| devdbg (dev, "intr status %d", status); |
| break; |
| } |
| |
| if (!netif_running (dev->net)) |
| return; |
| |
| memset(urb->transfer_buffer, 0, urb->transfer_buffer_length); |
| status = usb_submit_urb (urb, GFP_ATOMIC); |
| if (status != 0 && netif_msg_timer (dev)) |
| deverr(dev, "intr resubmit --> %d", status); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| // unlink pending rx/tx; completion handlers do all other cleanup |
| |
| static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) |
| { |
| unsigned long flags; |
| struct sk_buff *skb, *skbnext; |
| int count = 0; |
| |
| spin_lock_irqsave (&q->lock, flags); |
| for (skb = q->next; skb != (struct sk_buff *) q; skb = skbnext) { |
| struct skb_data *entry; |
| struct urb *urb; |
| int retval; |
| |
| entry = (struct skb_data *) skb->cb; |
| urb = entry->urb; |
| skbnext = skb->next; |
| |
| // during some PM-driven resume scenarios, |
| // these (async) unlinks complete immediately |
| retval = usb_unlink_urb (urb); |
| if (retval != -EINPROGRESS && retval != 0) |
| devdbg (dev, "unlink urb err, %d", retval); |
| else |
| count++; |
| } |
| spin_unlock_irqrestore (&q->lock, flags); |
| return count; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| // precondition: never called in_interrupt |
| |
| static int usbnet_stop (struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| int temp; |
| DECLARE_WAIT_QUEUE_HEAD (unlink_wakeup); |
| DECLARE_WAITQUEUE (wait, current); |
| |
| netif_stop_queue (net); |
| |
| if (netif_msg_ifdown (dev)) |
| devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld", |
| dev->stats.rx_packets, dev->stats.tx_packets, |
| dev->stats.rx_errors, dev->stats.tx_errors |
| ); |
| |
| // ensure there are no more active urbs |
| add_wait_queue (&unlink_wakeup, &wait); |
| dev->wait = &unlink_wakeup; |
| temp = unlink_urbs (dev, &dev->txq) + unlink_urbs (dev, &dev->rxq); |
| |
| // maybe wait for deletions to finish. |
| while (!skb_queue_empty(&dev->rxq) && |
| !skb_queue_empty(&dev->txq) && |
| !skb_queue_empty(&dev->done)) { |
| msleep(UNLINK_TIMEOUT_MS); |
| if (netif_msg_ifdown (dev)) |
| devdbg (dev, "waited for %d urb completions", temp); |
| } |
| dev->wait = NULL; |
| remove_wait_queue (&unlink_wakeup, &wait); |
| |
| usb_kill_urb(dev->interrupt); |
| |
| /* deferred work (task, timer, softirq) must also stop. |
| * can't flush_scheduled_work() until we drop rtnl (later), |
| * else workers could deadlock; so make workers a NOP. |
| */ |
| dev->flags = 0; |
| del_timer_sync (&dev->delay); |
| tasklet_kill (&dev->bh); |
| |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| // posts reads, and enables write queuing |
| |
| // precondition: never called in_interrupt |
| |
| static int usbnet_open (struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| int retval = 0; |
| struct driver_info *info = dev->driver_info; |
| |
| // put into "known safe" state |
| if (info->reset && (retval = info->reset (dev)) < 0) { |
| if (netif_msg_ifup (dev)) |
| devinfo (dev, |
| "open reset fail (%d) usbnet usb-%s-%s, %s", |
| retval, |
| dev->udev->bus->bus_name, dev->udev->devpath, |
| info->description); |
| goto done; |
| } |
| |
| // insist peer be connected |
| if (info->check_connect && (retval = info->check_connect (dev)) < 0) { |
| if (netif_msg_ifup (dev)) |
| devdbg (dev, "can't open; %d", retval); |
| goto done; |
| } |
| |
| /* start any status interrupt transfer */ |
| if (dev->interrupt) { |
| retval = usb_submit_urb (dev->interrupt, GFP_KERNEL); |
| if (retval < 0) { |
| if (netif_msg_ifup (dev)) |
| deverr (dev, "intr submit %d", retval); |
| goto done; |
| } |
| } |
| |
| netif_start_queue (net); |
| if (netif_msg_ifup (dev)) { |
| char *framing; |
| |
| if (dev->driver_info->flags & FLAG_FRAMING_NC) |
| framing = "NetChip"; |
| else if (dev->driver_info->flags & FLAG_FRAMING_GL) |
| framing = "GeneSys"; |
| else if (dev->driver_info->flags & FLAG_FRAMING_Z) |
| framing = "Zaurus"; |
| else if (dev->driver_info->flags & FLAG_FRAMING_RN) |
| framing = "RNDIS"; |
| else if (dev->driver_info->flags & FLAG_FRAMING_AX) |
| framing = "ASIX"; |
| else |
| framing = "simple"; |
| |
| devinfo (dev, "open: enable queueing " |
| "(rx %d, tx %d) mtu %d %s framing", |
| RX_QLEN (dev), TX_QLEN (dev), dev->net->mtu, |
| framing); |
| } |
| |
| // delay posting reads until we're fully open |
| tasklet_schedule (&dev->bh); |
| done: |
| return retval; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| strncpy (info->driver, driver_name, sizeof info->driver); |
| strncpy (info->version, DRIVER_VERSION, sizeof info->version); |
| strncpy (info->fw_version, dev->driver_info->description, |
| sizeof info->fw_version); |
| usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); |
| } |
| |
| static u32 usbnet_get_link (struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| /* If a check_connect is defined, return it's results */ |
| if (dev->driver_info->check_connect) |
| return dev->driver_info->check_connect (dev) == 0; |
| |
| /* Otherwise, we're up to avoid breaking scripts */ |
| return 1; |
| } |
| |
| static u32 usbnet_get_msglevel (struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| return dev->msg_enable; |
| } |
| |
| static void usbnet_set_msglevel (struct net_device *net, u32 level) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| dev->msg_enable = level; |
| } |
| |
| static int usbnet_ioctl (struct net_device *net, struct ifreq *rq, int cmd) |
| { |
| #ifdef NEED_MII |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| if (dev->mii.mdio_read != NULL && dev->mii.mdio_write != NULL) |
| return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); |
| } |
| #endif |
| return -EOPNOTSUPP; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* work that cannot be done in interrupt context uses keventd. |
| * |
| * NOTE: with 2.5 we could do more of this using completion callbacks, |
| * especially now that control transfers can be queued. |
| */ |
| static void |
| kevent (void *data) |
| { |
| struct usbnet *dev = data; |
| int status; |
| |
| /* usb_clear_halt() needs a thread context */ |
| if (test_bit (EVENT_TX_HALT, &dev->flags)) { |
| unlink_urbs (dev, &dev->txq); |
| status = usb_clear_halt (dev->udev, dev->out); |
| if (status < 0 && status != -EPIPE) { |
| if (netif_msg_tx_err (dev)) |
| deverr (dev, "can't clear tx halt, status %d", |
| status); |
| } else { |
| clear_bit (EVENT_TX_HALT, &dev->flags); |
| netif_wake_queue (dev->net); |
| } |
| } |
| if (test_bit (EVENT_RX_HALT, &dev->flags)) { |
| unlink_urbs (dev, &dev->rxq); |
| status = usb_clear_halt (dev->udev, dev->in); |
| if (status < 0 && status != -EPIPE) { |
| if (netif_msg_rx_err (dev)) |
| deverr (dev, "can't clear rx halt, status %d", |
| status); |
| } else { |
| clear_bit (EVENT_RX_HALT, &dev->flags); |
| tasklet_schedule (&dev->bh); |
| } |
| } |
| |
| /* tasklet could resubmit itself forever if memory is tight */ |
| if (test_bit (EVENT_RX_MEMORY, &dev->flags)) { |
| struct urb *urb = NULL; |
| |
| if (netif_running (dev->net)) |
| urb = usb_alloc_urb (0, GFP_KERNEL); |
| else |
| clear_bit (EVENT_RX_MEMORY, &dev->flags); |
| if (urb != NULL) { |
| clear_bit (EVENT_RX_MEMORY, &dev->flags); |
| rx_submit (dev, urb, GFP_KERNEL); |
| tasklet_schedule (&dev->bh); |
| } |
| } |
| |
| if (test_bit (EVENT_LINK_RESET, &dev->flags)) { |
| struct driver_info *info = dev->driver_info; |
| int retval = 0; |
| |
| clear_bit (EVENT_LINK_RESET, &dev->flags); |
| if(info->link_reset && (retval = info->link_reset(dev)) < 0) { |
| devinfo(dev, "link reset failed (%d) usbnet usb-%s-%s, %s", |
| retval, |
| dev->udev->bus->bus_name, dev->udev->devpath, |
| info->description); |
| } |
| } |
| |
| if (dev->flags) |
| devdbg (dev, "kevent done, flags = 0x%lx", |
| dev->flags); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void tx_complete (struct urb *urb, struct pt_regs *regs) |
| { |
| struct sk_buff *skb = (struct sk_buff *) urb->context; |
| struct skb_data *entry = (struct skb_data *) skb->cb; |
| struct usbnet *dev = entry->dev; |
| |
| if (urb->status == 0) { |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += entry->length; |
| } else { |
| dev->stats.tx_errors++; |
| |
| switch (urb->status) { |
| case -EPIPE: |
| defer_kevent (dev, EVENT_TX_HALT); |
| break; |
| |
| /* software-driven interface shutdown */ |
| case -ECONNRESET: // async unlink |
| case -ESHUTDOWN: // hardware gone |
| break; |
| |
| // like rx, tx gets controller i/o faults during khubd delays |
| // and so it uses the same throttling mechanism. |
| case -EPROTO: // ehci |
| case -ETIMEDOUT: // ohci |
| case -EILSEQ: // uhci |
| if (!timer_pending (&dev->delay)) { |
| mod_timer (&dev->delay, |
| jiffies + THROTTLE_JIFFIES); |
| if (netif_msg_link (dev)) |
| devdbg (dev, "tx throttle %d", |
| urb->status); |
| } |
| netif_stop_queue (dev->net); |
| break; |
| default: |
| if (netif_msg_tx_err (dev)) |
| devdbg (dev, "tx err %d", entry->urb->status); |
| break; |
| } |
| } |
| |
| urb->dev = NULL; |
| entry->state = tx_done; |
| defer_bh(dev, skb, &dev->txq); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void usbnet_tx_timeout (struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| unlink_urbs (dev, &dev->txq); |
| tasklet_schedule (&dev->bh); |
| |
| // FIXME: device recovery -- reset? |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| int length; |
| int retval = NET_XMIT_SUCCESS; |
| struct urb *urb = NULL; |
| struct skb_data *entry; |
| struct driver_info *info = dev->driver_info; |
| unsigned long flags; |
| #ifdef CONFIG_USB_NET1080 |
| struct nc_header *header = NULL; |
| struct nc_trailer *trailer = NULL; |
| #endif /* CONFIG_USB_NET1080 */ |
| |
| // some devices want funky USB-level framing, for |
| // win32 driver (usually) and/or hardware quirks |
| if (info->tx_fixup) { |
| skb = info->tx_fixup (dev, skb, GFP_ATOMIC); |
| if (!skb) { |
| if (netif_msg_tx_err (dev)) |
| devdbg (dev, "can't tx_fixup skb"); |
| goto drop; |
| } |
| } |
| length = skb->len; |
| |
| if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) { |
| if (netif_msg_tx_err (dev)) |
| devdbg (dev, "no urb"); |
| goto drop; |
| } |
| |
| entry = (struct skb_data *) skb->cb; |
| entry->urb = urb; |
| entry->dev = dev; |
| entry->state = tx_start; |
| entry->length = length; |
| |
| // FIXME: reorganize a bit, so that fixup() fills out NetChip |
| // framing too. (Packet ID update needs the spinlock...) |
| // [ BETTER: we already own net->xmit_lock, that's enough ] |
| |
| #ifdef CONFIG_USB_NET1080 |
| if (info->flags & FLAG_FRAMING_NC) { |
| header = (struct nc_header *) skb_push (skb, sizeof *header); |
| header->hdr_len = cpu_to_le16 (sizeof (*header)); |
| header->packet_len = cpu_to_le16 (length); |
| if (!((skb->len + sizeof *trailer) & 0x01)) |
| *skb_put (skb, 1) = PAD_BYTE; |
| trailer = (struct nc_trailer *) skb_put (skb, sizeof *trailer); |
| } |
| #endif /* CONFIG_USB_NET1080 */ |
| |
| usb_fill_bulk_urb (urb, dev->udev, dev->out, |
| skb->data, skb->len, tx_complete, skb); |
| urb->transfer_flags |= URB_ASYNC_UNLINK; |
| |
| /* don't assume the hardware handles USB_ZERO_PACKET |
| * NOTE: strictly conforming cdc-ether devices should expect |
| * the ZLP here, but ignore the one-byte packet. |
| * |
| * FIXME zero that byte, if it doesn't require a new skb. |
| */ |
| if ((length % dev->maxpacket) == 0) |
| urb->transfer_buffer_length++; |
| |
| spin_lock_irqsave (&dev->txq.lock, flags); |
| |
| #ifdef CONFIG_USB_NET1080 |
| if (info->flags & FLAG_FRAMING_NC) { |
| header->packet_id = cpu_to_le16 ((u16)dev->dev_packet_id++); |
| put_unaligned (header->packet_id, &trailer->packet_id); |
| #if 0 |
| devdbg (dev, "frame >tx h %d p %d id %d", |
| header->hdr_len, header->packet_len, |
| header->packet_id); |
| #endif |
| } |
| #endif /* CONFIG_USB_NET1080 */ |
| |
| switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) { |
| case -EPIPE: |
| netif_stop_queue (net); |
| defer_kevent (dev, EVENT_TX_HALT); |
| break; |
| default: |
| if (netif_msg_tx_err (dev)) |
| devdbg (dev, "tx: submit urb err %d", retval); |
| break; |
| case 0: |
| net->trans_start = jiffies; |
| __skb_queue_tail (&dev->txq, skb); |
| if (dev->txq.qlen >= TX_QLEN (dev)) |
| netif_stop_queue (net); |
| } |
| spin_unlock_irqrestore (&dev->txq.lock, flags); |
| |
| if (retval) { |
| if (netif_msg_tx_err (dev)) |
| devdbg (dev, "drop, code %d", retval); |
| drop: |
| retval = NET_XMIT_SUCCESS; |
| dev->stats.tx_dropped++; |
| if (skb) |
| dev_kfree_skb_any (skb); |
| usb_free_urb (urb); |
| } else if (netif_msg_tx_queued (dev)) { |
| devdbg (dev, "> tx, len %d, type 0x%x", |
| length, skb->protocol); |
| } |
| return retval; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| // tasklet (work deferred from completions, in_irq) or timer |
| |
| static void usbnet_bh (unsigned long param) |
| { |
| struct usbnet *dev = (struct usbnet *) param; |
| struct sk_buff *skb; |
| struct skb_data *entry; |
| |
| while ((skb = skb_dequeue (&dev->done))) { |
| entry = (struct skb_data *) skb->cb; |
| switch (entry->state) { |
| case rx_done: |
| entry->state = rx_cleanup; |
| rx_process (dev, skb); |
| continue; |
| case tx_done: |
| case rx_cleanup: |
| usb_free_urb (entry->urb); |
| dev_kfree_skb (skb); |
| continue; |
| default: |
| devdbg (dev, "bogus skb state %d", entry->state); |
| } |
| } |
| |
| // waiting for all pending urbs to complete? |
| if (dev->wait) { |
| if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) { |
| wake_up (dev->wait); |
| } |
| |
| // or are we maybe short a few urbs? |
| } else if (netif_running (dev->net) |
| && netif_device_present (dev->net) |
| && !timer_pending (&dev->delay) |
| && !test_bit (EVENT_RX_HALT, &dev->flags)) { |
| int temp = dev->rxq.qlen; |
| int qlen = RX_QLEN (dev); |
| |
| if (temp < qlen) { |
| struct urb *urb; |
| int i; |
| |
| // don't refill the queue all at once |
| for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) { |
| urb = usb_alloc_urb (0, GFP_ATOMIC); |
| if (urb != NULL) |
| rx_submit (dev, urb, GFP_ATOMIC); |
| } |
| if (temp != dev->rxq.qlen && netif_msg_link (dev)) |
| devdbg (dev, "rxqlen %d --> %d", |
| temp, dev->rxq.qlen); |
| if (dev->rxq.qlen < qlen) |
| tasklet_schedule (&dev->bh); |
| } |
| if (dev->txq.qlen < TX_QLEN (dev)) |
| netif_wake_queue (dev->net); |
| } |
| } |
| |
| |
| |
| /*------------------------------------------------------------------------- |
| * |
| * USB Device Driver support |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| // precondition: never called in_interrupt |
| |
| static void usbnet_disconnect (struct usb_interface *intf) |
| { |
| struct usbnet *dev; |
| struct usb_device *xdev; |
| struct net_device *net; |
| |
| dev = usb_get_intfdata(intf); |
| usb_set_intfdata(intf, NULL); |
| if (!dev) |
| return; |
| |
| xdev = interface_to_usbdev (intf); |
| |
| if (netif_msg_probe (dev)) |
| devinfo (dev, "unregister usbnet usb-%s-%s, %s", |
| xdev->bus->bus_name, xdev->devpath, |
| dev->driver_info->description); |
| |
| net = dev->net; |
| unregister_netdev (net); |
| |
| /* we don't hold rtnl here ... */ |
| flush_scheduled_work (); |
| |
| if (dev->driver_info->unbind) |
| dev->driver_info->unbind (dev, intf); |
| |
| free_netdev(net); |
| usb_put_dev (xdev); |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct ethtool_ops usbnet_ethtool_ops; |
| |
| // precondition: never called in_interrupt |
| |
| static int |
| usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) |
| { |
| struct usbnet *dev; |
| struct net_device *net; |
| struct usb_host_interface *interface; |
| struct driver_info *info; |
| struct usb_device *xdev; |
| int status; |
| |
| info = (struct driver_info *) prod->driver_info; |
| if (!info) { |
| dev_dbg (&udev->dev, "blacklisted by %s\n", driver_name); |
| return -ENODEV; |
| } |
| xdev = interface_to_usbdev (udev); |
| interface = udev->cur_altsetting; |
| |
| usb_get_dev (xdev); |
| |
| status = -ENOMEM; |
| |
| // set up our own records |
| net = alloc_etherdev(sizeof(*dev)); |
| if (!net) { |
| dbg ("can't kmalloc dev"); |
| goto out; |
| } |
| |
| dev = netdev_priv(net); |
| dev->udev = xdev; |
| dev->driver_info = info; |
| dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV |
| | NETIF_MSG_PROBE | NETIF_MSG_LINK); |
| skb_queue_head_init (&dev->rxq); |
| skb_queue_head_init (&dev->txq); |
| skb_queue_head_init (&dev->done); |
| dev->bh.func = usbnet_bh; |
| dev->bh.data = (unsigned long) dev; |
| INIT_WORK (&dev->kevent, kevent, dev); |
| dev->delay.function = usbnet_bh; |
| dev->delay.data = (unsigned long) dev; |
| init_timer (&dev->delay); |
| |
| SET_MODULE_OWNER (net); |
| dev->net = net; |
| strcpy (net->name, "usb%d"); |
| memcpy (net->dev_addr, node_id, sizeof node_id); |
| |
| #if 0 |
| // dma_supported() is deeply broken on almost all architectures |
| // possible with some EHCI controllers |
| if (dma_supported (&udev->dev, DMA_64BIT_MASK)) |
| net->features |= NETIF_F_HIGHDMA; |
| #endif |
| |
| net->change_mtu = usbnet_change_mtu; |
| net->get_stats = usbnet_get_stats; |
| net->hard_start_xmit = usbnet_start_xmit; |
| net->open = usbnet_open; |
| net->stop = usbnet_stop; |
| net->watchdog_timeo = TX_TIMEOUT_JIFFIES; |
| net->tx_timeout = usbnet_tx_timeout; |
| net->do_ioctl = usbnet_ioctl; |
| net->ethtool_ops = &usbnet_ethtool_ops; |
| |
| // allow device-specific bind/init procedures |
| // NOTE net->name still not usable ... |
| if (info->bind) { |
| status = info->bind (dev, udev); |
| // heuristic: "usb%d" for links we know are two-host, |
| // else "eth%d" when there's reasonable doubt. userspace |
| // can rename the link if it knows better. |
| if ((dev->driver_info->flags & FLAG_ETHER) != 0 |
| && (net->dev_addr [0] & 0x02) == 0) |
| strcpy (net->name, "eth%d"); |
| } else if (!info->in || info->out) |
| status = get_endpoints (dev, udev); |
| else { |
| dev->in = usb_rcvbulkpipe (xdev, info->in); |
| dev->out = usb_sndbulkpipe (xdev, info->out); |
| if (!(info->flags & FLAG_NO_SETINT)) |
| status = usb_set_interface (xdev, |
| interface->desc.bInterfaceNumber, |
| interface->desc.bAlternateSetting); |
| else |
| status = 0; |
| |
| } |
| |
| if (status == 0 && dev->status) |
| status = init_status (dev, udev); |
| if (status < 0) |
| goto out1; |
| |
| dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1); |
| |
| SET_NETDEV_DEV(net, &udev->dev); |
| status = register_netdev (net); |
| if (status) |
| goto out3; |
| if (netif_msg_probe (dev)) |
| devinfo (dev, "register usbnet at usb-%s-%s, %s, " |
| "%02x:%02x:%02x:%02x:%02x:%02x", |
| xdev->bus->bus_name, xdev->devpath, |
| dev->driver_info->description, |
| net->dev_addr [0], net->dev_addr [1], |
| net->dev_addr [2], net->dev_addr [3], |
| net->dev_addr [4], net->dev_addr [5]); |
| |
| // ok, it's ready to go. |
| usb_set_intfdata (udev, dev); |
| |
| // start as if the link is up |
| netif_device_attach (net); |
| |
| return 0; |
| |
| out3: |
| if (info->unbind) |
| info->unbind (dev, udev); |
| out1: |
| free_netdev(net); |
| out: |
| usb_put_dev(xdev); |
| return status; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #ifdef CONFIG_PM |
| |
| static int usbnet_suspend (struct usb_interface *intf, pm_message_t message) |
| { |
| struct usbnet *dev = usb_get_intfdata(intf); |
| |
| /* accelerate emptying of the rx and queues, to avoid |
| * having everything error out. |
| */ |
| netif_device_detach (dev->net); |
| (void) unlink_urbs (dev, &dev->rxq); |
| (void) unlink_urbs (dev, &dev->txq); |
| intf->dev.power.power_state = PMSG_SUSPEND; |
| return 0; |
| } |
| |
| static int usbnet_resume (struct usb_interface *intf) |
| { |
| struct usbnet *dev = usb_get_intfdata(intf); |
| |
| intf->dev.power.power_state = PMSG_ON; |
| netif_device_attach (dev->net); |
| tasklet_schedule (&dev->bh); |
| return 0; |
| } |
| |
| #else /* !CONFIG_PM */ |
| |
| #define usbnet_suspend NULL |
| #define usbnet_resume NULL |
| |
| #endif /* CONFIG_PM */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #ifndef HAVE_HARDWARE |
| #error You need to configure some hardware for this driver |
| #endif |
| |
| /* |
| * chip vendor names won't normally be on the cables, and |
| * may not be on the device. |
| */ |
| |
| static const struct usb_device_id products [] = { |
| |
| #ifdef CONFIG_USB_ALI_M5632 |
| { |
| USB_DEVICE (0x0402, 0x5632), // ALi defaults |
| .driver_info = (unsigned long) &ali_m5632_info, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_AN2720 |
| { |
| USB_DEVICE (0x0547, 0x2720), // AnchorChips defaults |
| .driver_info = (unsigned long) &an2720_info, |
| }, { |
| USB_DEVICE (0x0547, 0x2727), // Xircom PGUNET |
| .driver_info = (unsigned long) &an2720_info, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_BELKIN |
| { |
| USB_DEVICE (0x050d, 0x0004), // Belkin |
| .driver_info = (unsigned long) &belkin_info, |
| }, { |
| USB_DEVICE (0x056c, 0x8100), // eTEK |
| .driver_info = (unsigned long) &belkin_info, |
| }, { |
| USB_DEVICE (0x0525, 0x9901), // Advance USBNET (eTEK) |
| .driver_info = (unsigned long) &belkin_info, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_AX8817X |
| { |
| // Linksys USB200M |
| USB_DEVICE (0x077b, 0x2226), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Netgear FA120 |
| USB_DEVICE (0x0846, 0x1040), |
| .driver_info = (unsigned long) &netgear_fa120_info, |
| }, { |
| // DLink DUB-E100 |
| USB_DEVICE (0x2001, 0x1a00), |
| .driver_info = (unsigned long) &dlink_dub_e100_info, |
| }, { |
| // Intellinet, ST Lab USB Ethernet |
| USB_DEVICE (0x0b95, 0x1720), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Hawking UF200, TrendNet TU2-ET100 |
| USB_DEVICE (0x07b8, 0x420a), |
| .driver_info = (unsigned long) &hawking_uf200_info, |
| }, { |
| // Billionton Systems, USB2AR |
| USB_DEVICE (0x08dd, 0x90ff), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // ATEN UC210T |
| USB_DEVICE (0x0557, 0x2009), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Buffalo LUA-U2-KTX |
| USB_DEVICE (0x0411, 0x003d), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter" |
| USB_DEVICE (0x6189, 0x182d), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // corega FEther USB2-TX |
| USB_DEVICE (0x07aa, 0x0017), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Surecom EP-1427X-2 |
| USB_DEVICE (0x1189, 0x0893), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // goodway corp usb gwusb2e |
| USB_DEVICE (0x1631, 0x6200), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // ASIX AX88772 10/100 |
| USB_DEVICE (0x0b95, 0x7720), |
| .driver_info = (unsigned long) &ax88772_info, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_EPSON2888 |
| { |
| USB_DEVICE (0x0525, 0x2888), // EPSON USB client |
| .driver_info = (unsigned long) &epson2888_info, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_GENESYS |
| { |
| USB_DEVICE (0x05e3, 0x0502), // GL620USB-A |
| .driver_info = (unsigned long) &genelink_info, |
| }, |
| /* NOT: USB_DEVICE (0x05e3, 0x0501), // GL620USB |
| * that's half duplex, not currently supported |
| */ |
| #endif |
| |
| #ifdef CONFIG_USB_NET1080 |
| { |
| USB_DEVICE (0x0525, 0x1080), // NetChip ref design |
| .driver_info = (unsigned long) &net1080_info, |
| }, { |
| USB_DEVICE (0x06D0, 0x0622), // Laplink Gold |
| .driver_info = (unsigned long) &net1080_info, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_PL2301 |
| { |
| USB_DEVICE (0x067b, 0x0000), // PL-2301 |
| .driver_info = (unsigned long) &prolific_info, |
| }, { |
| USB_DEVICE (0x067b, 0x0001), // PL-2302 |
| .driver_info = (unsigned long) &prolific_info, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_KC2190 |
| { |
| USB_DEVICE (0x050f, 0x0190), // KC-190 |
| .driver_info = (unsigned long) &kc2190_info, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_RNDIS |
| { |
| /* RNDIS is MSFT's un-official variant of CDC ACM */ |
| USB_INTERFACE_INFO (USB_CLASS_COMM, 2 /* ACM */, 0x0ff), |
| .driver_info = (unsigned long) &rndis_info, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_ARMLINUX |
| /* |
| * SA-1100 using standard ARM Linux kernels, or compatible. |
| * Often used when talking to Linux PDAs (iPaq, Yopy, etc). |
| * The sa-1100 "usb-eth" driver handles the basic framing. |
| * |
| * PXA25x or PXA210 ... these use a "usb-eth" driver much like |
| * the sa1100 one, but hardware uses different endpoint numbers. |
| * |
| * Or the Linux "Ethernet" gadget on hardware that can't talk |
| * CDC Ethernet (e.g., no altsettings), in either of two modes: |
| * - acting just like the old "usb-eth" firmware, though |
| * the implementation is different |
| * - supporting RNDIS as the first/default configuration for |
| * MS-Windows interop; Linux needs to use the other config |
| */ |
| { |
| // 1183 = 0x049F, both used as hex values? |
| // Compaq "Itsy" vendor/product id |
| USB_DEVICE (0x049F, 0x505A), // usb-eth, or compatible |
| .driver_info = (unsigned long) &linuxdev_info, |
| }, { |
| USB_DEVICE (0x0E7E, 0x1001), // G.Mate "Yopy" |
| .driver_info = (unsigned long) &yopy_info, |
| }, { |
| USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader |
| .driver_info = (unsigned long) &blob_info, |
| }, { |
| // Linux Ethernet/RNDIS gadget on pxa210/25x/26x |
| // e.g. Gumstix, current OpenZaurus, ... |
| USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203), |
| .driver_info = (unsigned long) &linuxdev_info, |
| }, |
| #endif |
| |
| #if defined(CONFIG_USB_ZAURUS) || defined(CONFIG_USB_CDCETHER) |
| /* |
| * SA-1100 based Sharp Zaurus ("collie"), or compatible. |
| * Same idea as above, but different framing. |
| * |
| * PXA-2xx based models are also lying-about-cdc. |
| * Some models don't even tell the same lies ... |
| * |
| * NOTE: OpenZaurus versions with 2.6 kernels won't use these entries, |
| * unlike the older ones with 2.4 "embedix" kernels. |
| * |
| * NOTE: These entries do double-duty, serving as blacklist entries |
| * whenever Zaurus support isn't enabled, but CDC Ethernet is. |
| */ |
| #define ZAURUS_MASTER_INTERFACE \ |
| .bInterfaceClass = USB_CLASS_COMM, \ |
| .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ |
| .bInterfaceProtocol = USB_CDC_PROTO_NONE |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x8004, |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = ZAURUS_STRONGARM_INFO, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x8005, /* A-300 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = ZAURUS_PXA_INFO, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x8006, /* B-500/SL-5600 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = ZAURUS_PXA_INFO, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x8007, /* C-700 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = ZAURUS_PXA_INFO, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x9031, /* C-750 C-760 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = ZAURUS_PXA_INFO, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x9032, /* SL-6000 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = ZAURUS_PXA_INFO, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| /* reported with some C860 units */ |
| .idProduct = 0x9050, /* C-860 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = ZAURUS_PXA_INFO, |
| }, |
| |
| #ifdef CONFIG_USB_ZAURUS |
| /* At least some (reports vary) PXA units have very different lies |
| * about their standards support: they claim to be cell phones with |
| * direct access to their radios. (They don't conform to CDC MDLM.) |
| */ |
| { |
| USB_INTERFACE_INFO (USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, |
| USB_CDC_PROTO_NONE), |
| .driver_info = (unsigned long) &bogus_mdlm_info, |
| }, |
| #endif |
| |
| /* Olympus has some models with a Zaurus-compatible option. |
| * R-1000 uses a FreeScale i.MXL cpu (ARMv4T) |
| */ |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x07B4, |
| .idProduct = 0x0F02, /* R-1000 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = OLYMPUS_MXL_INFO, |
| }, |
| #endif |
| |
| #ifdef CONFIG_USB_CDCETHER |
| { |
| /* CDC Ether uses two interfaces, not necessarily consecutive. |
| * We match the main interface, ignoring the optional device |
| * class so we could handle devices that aren't exclusively |
| * CDC ether. |
| * |
| * NOTE: this match must come AFTER entries working around |
| * bugs/quirks in a given product (like Zaurus, above). |
| */ |
| USB_INTERFACE_INFO (USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, |
| USB_CDC_PROTO_NONE), |
| .driver_info = (unsigned long) &cdc_info, |
| }, |
| #endif |
| |
| { }, // END |
| }; |
| MODULE_DEVICE_TABLE (usb, products); |
| |
| static struct usb_driver usbnet_driver = { |
| .owner = THIS_MODULE, |
| .name = driver_name, |
| .id_table = products, |
| .probe = usbnet_probe, |
| .disconnect = usbnet_disconnect, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| }; |
| |
| /* Default ethtool_ops assigned. Devices can override in their bind() routine */ |
| static struct ethtool_ops usbnet_ethtool_ops = { |
| .get_drvinfo = usbnet_get_drvinfo, |
| .get_link = usbnet_get_link, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int __init usbnet_init (void) |
| { |
| // compiler should optimize these out |
| BUG_ON (sizeof (((struct sk_buff *)0)->cb) |
| < sizeof (struct skb_data)); |
| #ifdef CONFIG_USB_CDCETHER |
| BUG_ON ((sizeof (((struct usbnet *)0)->data) |
| < sizeof (struct cdc_state))); |
| #endif |
| |
| random_ether_addr(node_id); |
| |
| return usb_register(&usbnet_driver); |
| } |
| module_init (usbnet_init); |
| |
| static void __exit usbnet_exit (void) |
| { |
| usb_deregister (&usbnet_driver); |
| } |
| module_exit (usbnet_exit); |
| |
| MODULE_AUTHOR ("David Brownell <dbrownell@users.sourceforge.net>"); |
| MODULE_DESCRIPTION ("USB Host-to-Host Link Drivers (numerous vendors)"); |
| MODULE_LICENSE ("GPL"); |