rt2800: 5592: add iq calibration
Based on:
GetIQCalibration()
IQCalibration()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 9d18d53..25c94b5 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2532,6 +2532,61 @@
#define EEPROM_BBP_REG_ID FIELD16(0xff00)
/*
+ * EEPROM IQ Calibration, unlike other entries those are byte addresses.
+ */
+
+#define EEPROM_IQ_GAIN_CAL_TX0_2G 0x130
+#define EEPROM_IQ_PHASE_CAL_TX0_2G 0x131
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_2G 0x132
+#define EEPROM_IQ_GAIN_CAL_TX1_2G 0x133
+#define EEPROM_IQ_PHASE_CAL_TX1_2G 0x134
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_2G 0x135
+#define EEPROM_IQ_GAIN_CAL_RX0_2G 0x136
+#define EEPROM_IQ_PHASE_CAL_RX0_2G 0x137
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_2G 0x138
+#define EEPROM_IQ_GAIN_CAL_RX1_2G 0x139
+#define EEPROM_IQ_PHASE_CAL_RX1_2G 0x13A
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_2G 0x13B
+#define EEPROM_RF_IQ_COMPENSATION_CONTROL 0x13C
+#define EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL 0x13D
+#define EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G 0x144
+#define EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G 0x145
+#define EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G 0X146
+#define EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G 0x147
+#define EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G 0x148
+#define EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G 0x149
+#define EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G 0x14A
+#define EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G 0x14B
+#define EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G 0X14C
+#define EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G 0x14D
+#define EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G 0x14E
+#define EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G 0x14F
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH36_TO_CH64_5G 0x150
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH36_TO_CH64_5G 0x151
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH100_TO_CH138_5G 0x152
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH100_TO_CH138_5G 0x153
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH140_TO_CH165_5G 0x154
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH140_TO_CH165_5G 0x155
+#define EEPROM_IQ_GAIN_CAL_RX0_CH36_TO_CH64_5G 0x156
+#define EEPROM_IQ_PHASE_CAL_RX0_CH36_TO_CH64_5G 0x157
+#define EEPROM_IQ_GAIN_CAL_RX0_CH100_TO_CH138_5G 0X158
+#define EEPROM_IQ_PHASE_CAL_RX0_CH100_TO_CH138_5G 0x159
+#define EEPROM_IQ_GAIN_CAL_RX0_CH140_TO_CH165_5G 0x15A
+#define EEPROM_IQ_PHASE_CAL_RX0_CH140_TO_CH165_5G 0x15B
+#define EEPROM_IQ_GAIN_CAL_RX1_CH36_TO_CH64_5G 0x15C
+#define EEPROM_IQ_PHASE_CAL_RX1_CH36_TO_CH64_5G 0x15D
+#define EEPROM_IQ_GAIN_CAL_RX1_CH100_TO_CH138_5G 0X15E
+#define EEPROM_IQ_PHASE_CAL_RX1_CH100_TO_CH138_5G 0x15F
+#define EEPROM_IQ_GAIN_CAL_RX1_CH140_TO_CH165_5G 0x160
+#define EEPROM_IQ_PHASE_CAL_RX1_CH140_TO_CH165_5G 0x161
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH36_TO_CH64_5G 0x162
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH36_TO_CH64_5G 0x163
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH100_TO_CH138_5G 0x164
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH100_TO_CH138_5G 0x165
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH140_TO_CH165_5G 0x166
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH140_TO_CH165_5G 0x167
+
+/*
* MCU mailbox commands.
* MCU_SLEEP - go to power-save mode.
* arg1: 1: save as much power as possible, 0: save less power.